Tender For Miscellaneous Necessary Civil Maintenance Work Of Villages Zone-3 In Yeida, 1 Earth Work In Excavation By Mechnical Means (Hydraulic Excavation) Manual Means In Foundation Trenches Or Drain (Not Exceeding 1.5 M In Width) Or 10 Sqm On Plain Inc, Gautam Buddha Nagar-Uttar Pradesh

Tender For Miscellaneous Necessary Civil Maintenance Work Of Villages Zone-3 In Yeida, 1 Earth work in excavation by mechnical means (hydraulic excavation) manual means in foundation trenches or drain (not exceeding 1.5 m in width) or 10 Sqm on plain including dressing of sides remaining bottom, lift upto1.5 m including getting out the excavated earth and disposal of surplus excavated soil as per direction of engg. in charge with in lead upto 50 m DAR 2.8.1 2 Cement concrete with 4cm gauge approved stone ballast coarse sand and cement in the proportion of 8:4:1 including supply of all material labour tools and plants etc required for all complation of work (item code 5:4;3) 3 M-150 brick work in 1:4 cement & corse sand 1.25 F.M. mortar in foundation and plinth including supply of all materials labour completion of the work Same as Item no. 305 but in 1:4 on cement and four course sand of 2.20 FM mortar UPPWD2020/303+ 305a 4 12mm Cement Plaster of mix: 1:6 (1 Cement : 6 Coarse Sand) UPPWDSOR/DAR-18/13.4.2) 5 Cement concrete with 4cm based approved stone ballast coarse sand and cement in the proportion of 4:2:1 including supply of all material labour tools and plants etc required for all completion of work (item code 5.06) 6 Dry brick on edge flooring in required pattern with bricks of class designation 75 on bed including filling joints with Jamuna sand (with F.P.S bricks) complete. 7 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (Based on SOR UP PWD 2020) 8 Providing and laying 80 mm thick factory made cement concreteinterlockingpaver block(ISI Marked) made by block making machine withstrong vibratory compaction of approved size design, shape, laid inrequired color and pattern over and including average50 mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per direction of Engineer-in - charge with conforming (UP PWD SOR 2020) (New SOR Based DSR 16.68) 9 Steel work welded in built up section/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating, frames, guard bar, ladder, railing, brackets, gates and similar work DAR UPPWD/10.25.2 10 Pumping out water by Diesel pump of discharge capacity of4000 lts per hour including fuel operator , suction & delivery pipes of size 4 X 4 length 150 as per direction of Engineer in Charge 11 Earth work in cutting or embarkment in ordinary soil excavation to be in the form of regular pits not exceeding 0.5M in depth and earth work in embarkment to be in 20 cm layers including ramaring and dressing the surface to required levels and slope and also including 1.5 m lifts and 30m, lead the earth from cutting to be used in making embarkment or to be deposited as special bank with in 30m distance as directed by engg in charge excluding royalty where ever applicable for small work or abadi area only for where machine can not be rache/move SORUPPWD/253A+231A/Pg. no. 14

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	17-12-2024	Corrigendum	Date	23-12-2024
2	19-12-2024	Corrigendum	Other	23-12-2024
3	23-12-2024	DATE OF EXTENSION	Date	30-12-2024

INR 840 /-

INR 25000.0 /-

INR 12.41 Lakhs /-