Tender For Repair Work Ayurved Arogya Mandir Ayush Malpura Chikisalaya - Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.1: 3: 6 Or Richer Mix. 2 Demol, malpura-Rajasthan

Repair Work Ayurved Arogya Mandir Ayush Malpura Chikisalaya - Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1: 3: 6 or richer mix. 2 Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-charge. 3 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membran @ 0.40 Itr/sq.mt. by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane. 3 mm thick 4 Cement mortar 1:3 (1 cement : 3 coarse sand) 5 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4( 1 cement : 4 coarse sand) 6 Removing white or colour wash by scrapping and sandpapering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing ). 7 Wall painting with Royal Play paint with various types ofdesigns as approved of approved brand and manufacture to give an even shade including all scaffalding.Two or more coats on New work including preparation of base with primer, putty lippy etc. Complete in all respect. 8 Lettering with black Japan paint of approved brand andmanufacture 9 Finishing walls with Acrylic Smooth exterior paint of requiredshade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm overand including base coat of water proofing cement paint applied@ 2.20 kg/ 10 sqm ). 10 Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provisionOld Work 11 Applying one coat of Cement primer of approved brand and manufacture on wall surface including all scaffolding 12 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Old work (One or more coats ) 13 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 14 Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and MAT finished tiles. 15 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 16 Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size. 17 Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead Of area 3 square meter and below. 18 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 19 Providing and fixing Square bars or other flat welded to window, ventilatiors etc. 20 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 21 Providing and fixing in CM 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry: Size 125 x 100mm. 22 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A : 25 mm thick. Commercial Veneer both side 23 Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. 24 ProvidingandfixingChlorinatedPolyvinyl Chloride(CPVC)pipes(IS15778:2007 code) having thermal stability for hot & cold watersupplyincludingallCPVCplain& brassthreadedfittingsi/cfixingthepipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one stepCPVCsolventcementandtestingof joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 25 15 mm nominal size 26 25 mm nominal size 27 P & F Bib Cock (IS : 8931 Mark), Superior qualityofapprovedmake:C.P.Brassbib cock,15mm nominal bore. 28 P & F Ball Cock(IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt. Not less than 300 gm,15mm. 29 P &FInletConnection (Angle Valves) Superior quality, of approved make, for Washbasin,Gyseretc. C.P.Inlet connection 15mm.Brass (IS : 8931 marked) 30 P&FFlushCock / FlushValve (IS: 9758 Mark) for WC of approved quality make : CP Brass Concealed 25mm nominal bore.

INR 500 /-

INR 3.41 Lakhs /-