Tender For Repair Work Ayurved Arogya Mandir Ayush Hathki, 1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1: 3: 6 or richer mix. 2 Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-charge. 3 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membran @ 0.40 Itr/sq.mt. by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane. 3 mm thick 4 Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-incharge. 5 Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 6 Cement mortar 1:3 (1 cement : 3 coarse sand) 7 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 8 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4( 1 cement : 4 coarse sand) 9 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing ). 10 Wall painting with Royal Play paint with various types of designs as approved of approved brand and manufacture to give an even shade including all scaffalding.Two or more coats on New work including preparation of base with primer, putty lippy etc. Complete in all respect. 11 Lettering with black Japan paint of approved brand and manufacture 12 Finishing walls with Acrylic Smooth exterior paint of requiredshade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm overand including base coat of water proofing cement paint applied@ 2.20 kg/ 10 sqm ). 13 Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provisionOld Work 14 Applying one coat of Cement primer of approved brand and manufacture on wall surface including all scaffolding 15 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Old work (One or more coats ) 16 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of thetile complete (excluding the cost of cement plaster on walls and pillar). 17 Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazedtiles and MAT finished tiles. 18 Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead Of area 3 square meter and below. 19 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as equired including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sashputty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting exceptnecessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%] 20 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 21 Providing and fixing Square bars or other flat welded to window, ventilatiors etc. 22 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 23 Providing and fixing in CM 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry: Size 125 x 100mm. 24 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steelfittings complete as per annexure A : 25 mm thick. Commercial Veneer both side 25 Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. 26 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymercoatedJorLhooks,boltsand nuts 8mm diameterwith bitumenand G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approvedsteelprimerandtwocoatsof approvedpaintonoverlappingofsheets complete (upto any pitch in horizontal/ verticalorcurvedsurfaces) excludingthe cost of purlins, rafters and trusses and includingcuttingtosizeandshape whenever required. 0.63 mm thick with zinc coating not less than 275 gm/m2 27 Providingandfixing1stqualityMAT finishedceremictilesize300x300mm confirming toIS:13755andIS:15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neatcement slurryfinished with flushpointinginthewhitecementmixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 28 Providingandfixing1stqualitystandard white,grey,ivory,fumeredbrown,light green,lightblueandotherlightshades glazedtilesconfirmingtoIS:13753&IS:15622ofsize200mmx300mminwalls, floors,steps,pillarsetc.laidonabedof neat cement slurry finished with flush pointinginthewhitecementmixedwith pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 29 Plaster on new surface on walls in cement sand mortar 1:6 including rackingof joints etc.completefinefinish:20mm thick. 30 Fine grinded Gangsaw cut 30-35 mm thick stoneflooringover20mm(average)thick baseofcementmortar1:4(1cement:4 coarsesand)jointedgreycementslurry mixedwithpigmenttomatchtheshadeof stone complete as per design drawing and instructionofEI.Redsandstone(Karauli stone) 31 P&FrigidPVCPipe(IS:4985mark)class II/(4Kg./Cm2.)approvedquality/make including joining the pipe with solvent cementrubberringandlubricant.110mm dia 32 P&F rigid PVC pipe fittings(IS: 4985 mark) of approved quality /make including joining thepipewithsolventcementrubberring and lubricant: 33 Bend 87 .5 110mm dia 34 Pipe Clip 110mm dia 35 Coupler (socket) 110mm dia 36 ProvidingandfixingChlorinatedPolyvinyl Chloride(CPVC)pipes(IS15778:2007 code) having thermal stability for hot & cold watersupplyincludingallCPVCplain& brassthreadedfittingsi/cfixingthepipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one stepCPVCsolventcementandtestingof joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 37 15 mm nominal size 38 25 mm nominal size 39 P & F Bib Cock (IS : 8931 Mark), Superior qualityofapprovedmake:C.P.Brassbib cock,15mm nominal bore. 40 P & F Ball Cock(IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt. Not less than 300 gm,15mm. 41 P & F W.V.C. UrinalPartitionPlate of approvedstandardmakeofsize 630x315mm including making good the wall. 42 P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor 43 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted1No. 15mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste couplingofapprovedmake,P.V.CWaste pipe with PVC nut 32 mm complete includingcutting&makinggoodthewall: Size 450 mm x 300 mm 44 Supply&fixingG.I.UnionISImarkedinG.I.pipelineasrequiredcompleteinall respect of size : 25mm dia nominal bore 45 P &FInletConnection (Angle Valves) Superior quality, of approved make, for Washbasin,Gyseretc. C.P.Inlet connection 15mm.Brass (IS : 8931marked) 46 P&FFlushCock / FlushValve (IS: 9758 Mark) for WC of approved quality make : CP Brass Concealed 25mm nominal bore. 47 P & F PVC Storage TankISI Marked (IS : 12701)indicatingthe BISlicenseNo), of approvedmakewithcover,25mmdia1M longG.I.over-flowpipe&25Cm.long wash out pipe with plug & socket, including makingconnectionetc.,completeof approved design:500 litres capacity. 48 Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats)
