Tender For Repairing Work Aayushman Mandir Civil And Branding Work Baseri Pwd Division Baseri, 1 Random Rubble Stone Masonry For Superstructure Above Plinth Level One Storey Height Above 30Cm. Thick Walls In :Cement Mortar 1:6 ( 1-Cement : 6-Sand). 2 , baseri-Rajasthan

Tender For Repairing Work Aayushman Mandir Civil And Branding Work Baseri Pwd Division Baseri, 1 Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm. thick walls in :Cement Mortar 1:6 ( 1-Cement : 6-Sand). 2 Brick masonry for superstructure upto third storey with bricks of class designation 75 in : cement mortar 1:4 (1 cement : 4 coarse sand). 3 Plaster on new surface on walls in cement sand mortar 1:3 including racking of joints etc. complete fine finished 12 mm thick. 4 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finished 20 mm thick. 5 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :Wire Gauge 14 mesh x 24 gauge 6 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 7 Grading roof water proofing treatment with : cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). with water proof compound as per manufactures specification. 8 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles ISI marked [IS : 13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and pillar). Category-A : Kajaria, Jhonson, , Somani make. 9 Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding:old work (one or more coats) 10 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding. old work (one or more coats) including scrapping surface and necessary repairs.change colour 11 Wall painting with Royal Play paint with various types of designs as approved of approved brand and manufacture to give an even shade including all scaffalding. Two or more coats on New work including preparation of base with primer, putty lippy etc. Complete in all respect. 12 Painting with enamel paint of approved brand and manufacture to given an even shade two or more coats 13 New work 14 Old work 15 Providing and fixing precast cement concrete coping 1:2:4 mix 50mm thick complete as per specification : 50mm. 16 Providing and fixing M.S. sheet double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint M.S. Sheet 18 S.W.G Add extra for double leaf shutters. 17 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete ISLB 300*150 MM 18 Add Extra if I/Rail section is used 10%. 19 Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply, capable to withstand temperature upto 80ºC including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers connectors etc.withtrenching & refilling and testing of joints complete as per direction of Engineer In charge3240 (40mm O.D ) Pipe.External work 20 P & F Bib Cock (IS:8931 Mark), Superior quality of approved make.CP Brass bib cock, 15mm nominal bore.

INR 500 /-

INR 6040.0 /-

INR 3.02 Lakhs /-