|
| 1 | Supplying and erection of H-Beam 152x152mm 37.1Kg./mtr., 13Mtr.Long un jointed steel support for 33/11 KV line as per IS standard & approved make including welding, drilling of holes, etc. complete as required with concreting Of Foundation in 1:3:6 (1 cement: 3 Coarse sand: 6 graded stone aggregate 40mm nominal size) excavation in all soil &refilling of pit other than c.c. by boulders & excavated soil with ramming & watering, with foundation Size 0.6Mx0.6Mx1/8th M depth of length of pole with base padding from stone block/precast block of size (450x450x750 mm) Earth coil 4.0mm G.I. Wire 50mm dia 115 turns & 2.5 mtr. Lead, muffing etc. as required including painting with red oxide H-Beam 152x152mm 37.1 Kg./mtr., 11 Mtr. Long |
| 2 | Back Clamps for PCC Pole M.S. Flat 50x6mm Flat |
| 3 | H-Beam Back Clamps 65x8mm Flat |
| 4 | Supplying and erection of stay set complete with16mm.dia 1.8 metre long stay rod, turn buckle, anchorplate of size 200mm x 200mm x 6.0mm, stay clamp,bow tightener, 7/3.15 diaG.I. stay wire etc. in cementconcrete M-10 (1 cement: 3coarse and: 6 grandedstone aggregate 40mm nominal size) foundationincluding excavation and back refilling etc. asrequired.11 Kv Stay Set |
| 5 | Supplying and fixing of I.S. & approved make M.S. Angle/Channel/Flat Iron fabricated fittings i.e. bracket/cross arm/clamps etc. on existing support for overhead line/bus bar/equipments including nuts & bolts, back clamp required holes, welding & other necessary work & materials required. (A) Nut Bolt |
| 6 | (b)11 KV Strain Hardware (T&C Type) fittings. |
| 7 | (c) D.C. Cross arm of M.S. Channel 100x50x6mm (8\" Centre to centre) |
| 8 | (d)TransformerBeltingSet50x50x6mmAnglewith two cross fixing channel. |
| 9 | (e) D.O. Mounting Channel 75x40x6mm |
| 10 | Supplying and fixing followingglazed Polymer/porcelain insulators of approved make on existing pole bracket/cross arm with necessary material as required.11 KV Composite Polymer Disc Insulator. |
| 11 | Supplying and drawing of AAAC Rabbit conductor 0.05 Sq. inch (55 Sq.mm Al. Eq.) confirming to IS:398-1976 of approved make, stringing, binding at existing insulator, jointing with jointing sleeves, jumpering, tearing off, connecting etc. with all accessories as required including cleaning of obstacles (if any) and required sag (Approx. 3%)11 KV Conductor |
| 12 | Supplying, installing, testing and commissioning of11/0.4 KV 3 Phase 50 cycle oil immersed, naturally cooled, outdoor type transformer connected delta on H.T. side and star on L.T. side, dehydrating silica gel breather on eye level, rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge, drain valve with plug, temperature not exceeding 50ºC on load, oil filling hole with plug, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable box on LV side, first filling of oil upto desired level and transformer installing on existing structure with all required materials arrangement as required ISI marked & as per IS specification, hand operated off load tap changer switch above 100 KVA, oil conservator with drain valve, plug 63 KVA and above. Aluminium wound BIS certified Energy Eff. Level-III 63 KVA Aluminium Wound. |
| 13 | Transformer Mounting Channel (100x50x6mm) |
| 14 | Bi - Metalic Clamp distribution transformers bushing |
| 15 | Bi- Metalic Clamp suitalbe 12mm dia stud and 80 Sq.mm. AAAC |
| 16 | L.T. Distribution box With isolator on incoming with HRC Fuse For 63 KVA DTR(200Amp. Isolator & amp;6 SP of 60 Amp) as per MP MKVV Co Ltd. Item Code M-0201128 |
| 17 | Providing and fixing Supply of XLPE insulated power cable(conforming IS-7098 Part-I) 1100 Voltgrade, 1 core/2 core/3½ core/4 core ISImarked with alu. stranded /solidconductor. Unarmoured 1 core 50 sq. mm. |
| 18 | Providing and fixing Supply of XLPE insulated power cable(conforming IS-7098 Part-I) 1100 Voltgrade, 1 core/2 core/3½ core/4 core ISImarked with alu. stranded /solidconductor. Unarmoured 1 core 70 sq. mm. |
| 19 | 3 Phase Static Energy Meter 22-80 amps with L.S.& TOD facility with box |
| 20 | 11 KV D.O. Fuse Unit Polymer Type |
| 21 | Anti climbing device (Barbed Wire) GS 2.24mm dia (14 SWG) |
| 22 | Earthing set (DTR earthing) as per G1 Schedule G1 for Black Cotton Soil |
