|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal ofexcavated earth, lead upto 50m andlift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil.(B/1.6) |
| 2 | Earth work in surface excavation not exceeding 30cm. in depth but exceeding 1.5 meter in width as well as10 Sqm on plan including disposal of excavated earth up to 50 Mtr. and lift up to 1.5 Mtr. disposed soil to be levelled and neatly dressed : All kinds of soil.(B/1.1) |
| 3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level-1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).( B-3/ 3.1.6 ) |
| 4 | Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement.M20 grade Nominal Mix / Design Mix ( B-4/4.1) |
| 5 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level TMT bars(B-4.13.3) |
| 6 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. ( B-4 / 4.9 ) |
| 7 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. Add extra 10 % if I or rail section is used . (B/9.1+9.1.1) |
| 8 | Structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: (B-86/9.2) |
| 9 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide . (B/9.8) |
| 10 | Painting exterior surface of wall with 100 % acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats incl. preparation of base with sand papering,primer,putty etc complete in all respect incl scaffolding and safety provision. New work (B12.43.1) |
| 11 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia (B/3.16.3) |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade :Two or more coats on new work. (B/12.46.1) |
| 13 | Plaster on new surface on walls in CM 1:6 incl racking of joints etc complete fine finish 20 mm thick (B-12.3.2) |
| 14 | Supply of 40 mm nominal size crusher broken/ G-293) |
| 15 | Carriage of building rubish, stone metal ( Grit & Ballast Etc.) From Badmer Quarry 120 Km Distance ( G-5.2) |
| 16 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level M10 grade Nominal Mix (1: 3: 6) (B-3.1.3) |
| 17 | Carriage of earth,Sand, lime,morrum,manure or sludge)For lead upto 450 meters. (B-4/4.1) |
