|
| 1 | Dismantling steel work in built up sections in angles, tees, flats andchannels including all gusset plates, bolts, nuts, cutting rivets, welding etc.including dismembering and stacking within 50 meters lead. |
| 2 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 3 | Brick work with common burnt clay non-modular bricks of class designation 7.5. in foundation and plinth including curing complete in Cement mortar 1:4 ( 1 cement : 4 coarse sand) including extra lift upto floor V all complete Job |
| 4 | Providing wood work in frames of door windows clestory windows and other frame, wrought framed and fixed in position with hold flat lugs or with dash fastever of required diameter and length (holdfast lugs or dash fastens shall be paid seperately) Second class kail wood. |
| 5 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 30 mm thick Second class kail wood |
| 6 | Providing & fixing 4.0 mm thick glass panes(weighing not less than 10 kg/sqm) with all fixtures, all complete |
| 7 | Providing and fixing 35 mm thickwire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm with wire of dia .0.63 mm for doors, windows and clerestory windows including I.S.I. marked black enameled M.S. butt hinges with necessary screws.Second class kail wood |
| 8 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Second class kail wood |
| 9 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size). |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages complete job |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for: BEAMS |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for: EDGES OF SLAB |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for: STAIRS |
| 16 | 12 mm thick cement plaster of 1:6 mix ( 1 cement: 6 coarse sand) on walls etccomplete job |
| 17 | 6 mm thick cement plaster to Ceiling of 1:3 mix ( 1 cement: 3 coarse sand) complete job |
| 18 | Providing and applying French spirit polishing, Two or more coats on new works including a coat of wood filler.Complete job |
| 19 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(2 mm thick) |
| 20 | Providing and applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture. On wood work |
| 22 | Providing and fixing of bright finished brass hardware fittings with screws etc. complete: 100 mm Handle |
| 23 | Providing and fixing of bright finished brass hardware fittings with screws etc. complete: 200 mm Handle |
| 24 | Providing and fixing of bright finished brass hardware fittings with screws etc. complete: 100x10mm Tower bolts |
| 25 | Providing and fixing of bright finished brass hardware fittings with screws etc. complete: 150x10mm Tower bolts |
| 26 | Providing and fixing of bright finished brass hardware fittings with screws etc. complete: Stay Hooks |
| 27 | Providing and fixing of bright finished brass hardware fittings with screws etc. complete: L-Dop 18\" with inbuilt Locking System |
| 28 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 29 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.:PN-16 pipe , 25 mm OD(SDR-7.4) |
| 30 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.: PN-16 pipe , 32 mm OD(SDR-7.4) |
| 31 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 32 | Providing and fixing Ceramic glazed floor tiles (Anti skid) 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 33 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid.(Jaquar,Kerovit or of approved quality as per directions of Engineer Incharge) |
| 34 | Providing and fixing flat back Washbasin with Pedastal.(Jaquar,Kerovit or of approved quality as per directions of Engineer Incharge)Complete job |
| 35 | Providing and Fixing of CP Angle Valve of Jaquar,Kerovit or of approved quality as per directions of Engineer Incharge.Complete job |
| 36 | Providing and fixing C.P. brass Basin Mixer 15 mm Nominal Bore .(Jaquar or Equivalent as Per Make List) |
| 37 | Providing and fixing of looking mirror of approved make and brand as per directions of site incharge |
| 38 | Providing and fixing of Towel Hanger/Towel Standof approved make and brand as per directions of site incharge |
| 39 | Providing and fixing ofSoap Holderof approved make and brand as per directions of site incharge |
| 40 | Providing and fixing of glassCorner Shelves of approved make and brand as per directions of site incharge |
| 41 | Providing and Fixing of wall mixer non-telephonic for bath of Jaquar,Kerovit or of approved quality as per directions of Engineer Incharge. Complete job |
| 42 | Providing and fixing PVC waste pipe for sink and wash basin including PVC waste fittings complete |
| 43 | Providing and fixing of geysers of approved make and brand ( Racold, Havells,Jaquar or of approved quality as per directions of Engineer Incharge) incl all fixtures compete job. 50 Litres |
| 44 | Providing and fixing of bib cocks for bath rooms of Jaquar,Kerovit or of approved quality as per directions of Engineer Incharge. Complete job |
| 45 | Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for supports.Make: Pipe & fittings: VECTUS/Kisan/AKG: Outer dia.110mm |
| 46 | Providing and fixing of 75 mm dia PVC Pipes (Type B) of approved brand including alliedaccessories like collars, door junctions, socket, bends etc and all other fittings, complete jobMake: Pipe & fittings: VECTUS/Kisan/AKG: 75mm |
| 47 | Supplying and fixing the following sizes of Rigid Pvc conduites 1.8 mm thick complete with accessories such as bends junction boxes, pull boxes and etc25 mm nominal dia RIGID PVC conduits: 25mm |
| 48 | Structural steel work welded in built up sections, trusses(including soffit and eaves board) and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 49 | Structural Steel Available at site vide item 01 |
| 50 | Providing and fixingcolour coated galvanised High Rib ironsheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.( including Carriage)0.50 mm thick |
| 51 | Colour coated galvanised High Rib ironsheet roofing available at site vide item 02 |
| 52 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating |
| 53 | The estimated rates are exclusive of 18% GST. However the GST @18% shall be paid on gross amount excluding labour cess proportionately. |
