Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Items : |
| 2 | KITCHEN EQUIPMENTS : Supplying, Installation, Testing and Commissioning of Door Operated Air Curtain. Dimension : 2080W X 208D X 235H mm. Make out of MITZVAH or EURONICS,LABSOL. Model is ASP4210AP. It is made out of 304 grade stainless steel main plate and back plate. Front cover and MOC motor shell in aluminium sheet . ABS blower material. Door activated switch. Fan type: centrifugal. Standard height of curtain formed 8ft. Connected load will be 0.1kw,1 phase. Air Velocity at Nozzle : Discharge - 21/16M/s. RPM : Min. 2800. Item should be door operative. This item is modular type. Utilities is electrical. |
| 3 | Supplying, Installation, Testing and Commissioning of Door Operated Air Curtain. Dimension : 1480W X 208D X 235H mm. Make out of MITZVAH or EURONICS,LABSOL. Model is ASP2180AP. It is made out of 304 grade stainless steel main plate and back plate. Front cover and MOC motor shell in aluminium sheet . ABS blower material. Door activated switch. Fan type: centrifugal. Standard height of curtain formed 8ft. Connected load will be 0.1kw,1 phase. Air Velocity at Nozzle : Discharge - 21/16M/s. RPM : Min. 2800. Item should be door operative. This item is modular type. Utilities is electrical. |
| 4 | Supplying, Installation, Testing and Commissioning of Weighing Scale.Dimension : 600W X 600D X 175H mm. Make out of AVERY or E-KANTA, METIS. Model is H305. It is including Back-lit 6 digit, large LCD display, Dual power mains & rechargeable batteries, Robust die-cast Aluminium base, Check weight capabilities, Totalizing function. Capacity should be 0-50 kg. Connected Load is 0.1kw,1ph. This item is modular type. Utilities is electrical. |
| 5 | Supplying, Installation, Testing and Commissioning of Two Sink Pre Wash Unit With Side Bracing & Both Side Splash Back. Dimension : 1800W X 700D X 850+100H mm. Sink Size : 500W X 500D X 300H mm. It should meet the following criteria, Top in 14swg thick ss sheet bent 50mm and 12mm on all side excepting sides with splash back, Top reinforced by 12/25X100X25/12 channels of 14swg ss sheet, top sound dampened by an approved method, Rear splash raised 100mm above the working height of 850mm & bent 25mm with 19mm radius at base, Rear side of splash to be closed, 3 Side bracing 16swg 38mm dia round tube, Front to be covered with ss apron in 20ga ss 304 sheet, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Sink should follow below specification Sink in 16swg ss sheet with complete overflow system, deep drawn sink will be preferred, All corners coved at 30mm or large radius, Sink joint with top to be seamless and with rounded edges, 38mm dia CP drain waste, Long length lever handle twist type for drain waste valve. Drain Waste Valve - 02 Lever operated. Mixer Faucet : Pre rinse Twin hole / swivel type (Deck mounted). This item should include Upright in 16SWG 38mm Dia Pipe with Splash profile 90°. CP drain waste - T&S make - (B-3940-1) model with Long lever handle and complete overflow connection system, Side splash position to be verified from the equipment layout and BOQ, Sink location to be verified from the equipment plan. This item is Custom type. Utilities is drainage. |
| 6 | Supplying, Installation, Testing and Commissioning of Twin Hole Pre Rinse Spray Unit With Add-On Swivel Faucet. Make out of T&S or FRICOSMOS, FISHER. Model is 5PR-8D12. 8\" deck mount mixing faucet with polished chrome plated brass body, add-on faucet with ceramic cartridge and lever handle, 12 1/8\" swing nozzle with laminar flow device, 18\" riser, 44\" flexible stainless steel hose with resistant handle, Ceramic cartridges, lever handles, in-line check valves, 1/2\" NPT female inlets, 6\" adjustable wall bracket, spray valve holder and overhead spring, Temperature Max: 140 F (4.44℃), Spray Valve Flow: 4.35L/min), Nozzle Flow: (16.24 L/min), Unit suitable for mixing hot & cold water. Unit to be supplied with complete set of installation kit. Deck mounted. This item is Imported type. Utilities is plumbing. |
| 7 | Providing, Supplying and Fixing of Stainless Steel Platform Trolley. Dimension : 900W X 600D X 850H mm. Platform Trolley is make out with 16swgthicks.s. sheetPlatform, 25mmOD 16swgthicks.s. Pipehandle, 50x5mms.s. flatbracketsonbothsides,Rubber bumpers on all side, 4 nos. 150x50mm polyurethane plate castor\"s - 2 nos. with brakes, Castor\"s to have ss brackets, Under-frame of 38x38mm s.s angles. PU castors with ss 304 bracket. This item is Custom type. |
| 8 | Providing, Supplying and Fixing of 2 Tier Bussing Soiled Dish Trolley. Dimension : 700W X 1050D X 850H mm. Dish Trolley is make out of 02nos. 250mm deep troughs with coved corners in 14swg ss sheet, 38mm dia/16swg ss. round pipe uprights with integrated one pieces handle bar, Rubber bumpers on all side, 2nos. 150x50mm polyurethane castors with brakes and 2nos. fixed castors with ss brackets, All welded construction. Corner rubber guard required. This item is Custom type. |
| 9 | Supplying, Installation, Testing and Commissioning of Insectocutor With GLU Board. This item is Wall Mounted. Insectocutor is make out with PEST O FLASH or AVRO,FLYKILLER. Model is POF-B-T4-S. This Include Stainless steel protective grill with flame retardant material, To be equipped with UVA lamps with ledger insect electrocuting grid, Higher coverage area, High quality material and easy maintenance. Connected Load is about 0.085Kw, 1 Phase. This item is Modular type. Utilities is electrical. |
| 10 | Supplying, Installation, Testing and Commissioning of Water Cooler. Dimension : 440W X 440D X 1190H mm. Make out of BLUESTAR or CELFROST,VOLTAS. Model no. is SDIX240. Water Cooler is consider with Faster cooling, Eco-friendly, In situ power-saving PUF insulation,Sturdy compressor and trouble-free operation, Silent operation. Capacity is about 40 Ltrs. Connected load is about 0.5 Kw , 1 Phase. Nominal Cooling is 20Ltrs/Hr. Nos. of faucets is 1 and Refrigerant should be R-134a. This item is Modular type. Utilities are Electrical, Plumbing and Drainage. |
| 11 | Supplying, Installation, Testing and Commissioning of Water Purifier With UV Steriliser. Dimension : 204W X 133D X 193H mm. Overall Dimension : 527X820 mm. Make out of PENTAIR(EVER PURE) or ECOSTREAM - LITE. Model no. is QC71+MC2+UV2. Water Purifier with UV Steriliser is consider with Commercial quality filter head is designed exclusively to fit Everpure filter cartridges, Includes built-in water shut off valve, Quick sanitary cartridge change interface, Includes flushing valve quick change, Built-in water pressure gauge helps monitor proper flow, Reduces chlorine taste & odor and other offensive contaminants that can adversely affect the taste of beverages, Sanitary cartridge replacement is simple, quick and clean, Protects drink system seals, pump, tubing and small orifices from clogging, corrosion and abrasive wear. Connected Load will be 5A, 1Ph. Temperature is about 35-100Deg F (2-38Deg C).This item need single head+cartridge+UV steriliser. Utilities is electrical.This item is Imported type. |
| 12 | Providing, Supplying and Fixing of Stainless Steel Upright Storage Cabinet. Dimension : 900W X 600D x 1800+200H mm. 4 Compartments only, 2 nos. double walled hinged doors, SS 304 full height hinges,Integral handles, Magnetic catchers, Shelves in 18swg thick ss sheet, 16wg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, Slides/back in 18swg sheet, SS channel frame work, Facility for cylinder lock, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. It include Upright in 16SWG 38mm Dia Pipe. This item is Custom type. |
| 13 | Supplying, Installation, Testing and Commissioning of 4 Tier Stainless Steel Wire Green Epoxy Wire Shelving. Dimension : 1200W X 600D X 1800H mm. Make out of PRORAK or METRO. Model no. is SIG482474T5. Shelf made of low carbon steel wire, Wire diameter (mm) - 5.8mm, 25.4 mm round pipe verticals (1.2 mm thick), Production process: Phosphating, Zinc plating, Green Epoxy painted with Anti Bacterial coating, Zinc plating (0.012mm), Epoxy paint (0.08mm), Vertical pipe closed with plastic cap on top, Level adjustable foot, Wire shelf fixed to verticals with clips and are adjustable at 1” incremental, Collapsible, simple assembly, Shelving can be used in wet/high humidity area. No. of Shelves will be 4. Capacity is Load bearing 200 kg per shelf. Shelving to be NSF Certified. This item is Modular type. |
| 14 | Providing, Supplying and Fixing of Dunnage Rack. Dimension : 1200W X 600D X 200H mm. Make out of PRORAK or CAMBRO. VERTICAL POSTS: Made from a Steel Core with Smooth Polypropylene Exterior, TRAVERSES: Made from a Steel Core with Smooth Polypropylene Exterior,VENTED SHELF PLATES: Made from Polypropylene, Stationary Unit: 250 kg per shelf (Evenly Distributed). This item is Modular type. |
| 15 | Supplying, Installation, Testing and Commissioning of Two Door Upright Chiller Cum Freezer. Dimension : 700W X 840D 2000H mm. Make out of MG PRO or ELANPRO,TRUFROST. Model no. is CPro600M. This item included with External and internal constructed from AISI 304 stainless steel, High density 70mm polyurethane insulation with zero ODP, Worktop to be 14ga. ss 304, Automatic defrost cycle, Anti condensation heaters to be fitted to door mullions, Self closing doors, Electronic control with LED digital temperature display, Designed and engineered to operated up to 43degree ambient, Single compartment with 2 half doors with dual temperature, Shelves: SS rod shelves, Access to all components from the front, To be mounted on 150mm adjustable legs. Capacity is 1100Ltrs. Connected Load is 0.95Kw , 1 Phase. Refrigerant R134A is to be used. Temperature is +2 to +4 /-14 to -18 Degrees Celsius. Air cooled chilling unit and HACCP Compliance. Utilities is electrical. This item is Modular type. |
| 16 | Supplying, Installation, Testing and Commissioning of SS Hose Reel. Dimension : 3/8\" Hoose size (Wall Mounted). Hose Length is 15 meter. Make out of T&S or FRICOSMOS,FISHER. Model is B-7242-10. Adjustable hose bumper, Extended spray wand w/ swivel,Material: Epoxy coated steel open reel & wall bracket and polished chrome plated brass extended spray wand, Multi-fit bracket for wall, ceiling or under counter mounting, Open epoxy coated hose reel, Ratcheting system holds the length of hose until a slight tug to retract automatically, 3/8\" NPT female inlet, 3/8\" x 50\" heavy-duty non-marking hose rated to 300 PSI. Utilities is plumbing. This item is Imported type. |
| 17 | Supplying, Installation, Testing and Commissioning of Single Sink Pre Wash Unit With Side Bracing & Both Side Splash Back. Dimension : 1400W X 700D X 850+150H mm. Sink Size is 1200X600x400H mm. It Includes Top in 14swg thick ss sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 14swgSS sheet, top sound dampened by an approved method, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19 mm radius at base, Rear side of splash closed, Side bracing in 38m dia x16swg ss round pipe, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Sink in 16swg ss sheet with complete overflow system, deep drawn sink will be preferred, All corners coved at 30mm or large radius, Sink joint with top to be seamless and with rounded edges, 38mm dia CP drain waste, Long length lever handle for drain waste valve. Drain waste valve is 1 and also Lever Operated. Mixer Faucet is Twin hole and Swivel type. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. CP drain waste - T&S make - (B-3940-1) model with Long lever handle and complete overflow connection system, Sink location to be verified from equipment layout. Utilities is drainage. This item is Custom type. |
| 18 | Supplying, Installation, Testing and Commissioning of Stainless Steel Wire Segregation Bin For Solid Waste. Dimension : 600W X 750D X 750H mm. Construction in 18swg wire mesh, Removable lid in 18swg thick wire mesh, All corners duly coved, Lid to overhand by 25mm in front so as to be used as handle, 2 nos. SS. channels at base for fixing castor\"s, 4 nos. 100x50mm dia white polyurethane swivel type castor\"s - 2 nos. with brakes, Castor\"s to have SS 304 brackets. PU Castors with ss 304 brackets. This item is Custom type. |
| 19 | Providing, Supplying and Fixing of Mobile 4 Tier Polymer Shelving. Dimension : 1200W X 600D X 1800H mm. Make out of PRORAK or CAMBRO. VERTICAL POSTS: Made from a Steel Core with Smooth Polypropylene Exterior, TRAVERSES: Made from a Steel Core with Smooth Polypropylene Exterior, FLOOR LEVELERS: Made from Polypropylene, CASTORS: Non Corrosive Plastic Bracket with 127 mm Non-Marking Thermoplastic Rubber Wheels. No. of Shelves is 4. This item is Modular type. |
| 20 | Providing, Supplying and Fixing of Dunnage Rack.Dimension : 1200W X 600D X 225H mm. Make out of PRORAK or CAMBRO. VERTICAL POSTS: Made from a Steel Core with Smooth Polypropylene Exterior, TRAVERSES: Made from a Steel Core with Smooth Polypropylene Exterior, VENTED SHELF PLATES: Made from Polypropylene, Stationary Unit: 250 kg per shelf (Evenly Distributed). This item is Modular type. |
| 21 | Providing, Supplying and Fixing of Organic Waste Convertor. Dimension : 1710W X 700D X 1124H mm. Make out of GREENERIA or ACT,IMC. Model no. is G-100. Fully automated & Eco- Friendly, Non-intrusive accelerated natural and biological process, Noiseless & Odourless, 24 hours\" process with 85% - 90% Volume reduction, Zero Manpower, Low floor space & Zero maintenance cost, All contact parts - SS 304, Expected 25 years long machine life. Capacity is about 100kg per Day. Connected Load is 3.1kw, 3 Phase. Utilities is electrical. This item is Modular type. |
| 22 | Supplying, Installation, Testing and Commissioning of Door Operated Air Curtain. Dimension : 1195W X 208D X 235H mm. Make out of MITZVAH or EURONICS,LABSOL. Model is ASP2120AP. It is made out of 304 grade stainless steel main plate and back plate. Front cover and MOC motor shell in aluminium sheet . ABS blower material. Door activated switch. Fan type: centrifugal. Standard height of curtain formed 8ft. Connected load will be 0.1kw,1 phase. Air Velocity at Nozzle : Discharge - 21/16M/s. RPM : Min. 2800. Item should be door operative. Utilities is electrical. This item is modular type. |
| 23 | Providing, Supplying and Fixing of Pipe Tray Slide With Drip Tray. Dimension : 600W X 350D X 50H mm. 4 nos. 25mm dia 16swg ss 304 thick pipes with ends closed at 75mm gap, 2mm ss. sheet brackets with grooves for piped at gaps not exceeding 750mm, fixed to uprights with ss. hardware, Removable ss drip tray pan 20swg sheet to hold any food dropping. This item is Custom type. |
| 24 | Providing, Supplying and Fixing of Bainmarie Counter With Undershelf. Dimension : 1500W X 700D X 850H mm. Top in 16swg ss sheet bent 50mm and 12mm on all sides sound dampened by approved method, Uprights in 38mm dia x 16swg 304 grade s.s round tube, Under-shelf in 18swg thick s.ssheet, sides & back in 20swg s.s sheet,16swg thick s.s hat type channel of size 12/25x100x25/12mm for reinforced of under-shelf, Tank construction in 16swg thick s.s sheet all corners coved at 20mm or large radius, 3kw immersion type heating elements; quick acting ball valve for drain off, Rotary switch of reputed make, Water flow connection system, Water inlet faucet/socket; digital controller with temperature display, False bottom in 18swg ss sheet; insulation cover in 20swg s.s sheet, Glass wool insulation; 30-110deg. c or EGO -Germany make temperature controller, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Connected Load is 2.0 Kw , 1 Phase. Upright in 16SWG 38mm Dia Pipe. Utilities are electrical,plumbing and drainage. This item is Custom type. |
| 25 | Supplying, Installation, Testing and Commissioning of Counter Mounted Overhead Sneeze With Strip Heater & Toughened Glass. Dimension : 1500W X 350D X 600H mm. SS frame work with slanted toughened glass, SS type 304 grade 16swg, top & glass supports, 18swg s.s. reflector, Heating element should be protected with wire guard, Heavy-duty insulation with on/Off Switch, Even heat distribution, Teflon insulated wiring, Recessed controls. This item is Custom type. |
| 26 | Providing, Supplying and Fixing of Pipe Tray Slide With Drip Tray. Dimension : 1500W X 350D X 50H mm. 4 nos. 25mm dia 16swg ss 304 thick pipes with ends closed at 75mm gap, 2mm ss. sheet brackets with grooves for piped at gaps not exceeding 750mm, fixed to uprights with ss. hardware, Removable ss drip tray pan 20swg sheet to hold any food dropping. This item is Custom type. |
| 27 | Supplying, Installation, Testing and Commissioning of Single Door Counter Chiller With Cold Well - Brand. Dimension : 970W X 700D X 850H mm. Cold Well GN 1/1X2. Make out of WILLIAMS. Model no. is HOU(J)-LD-S. Top in 14swg SS sheet, Interior in 304 grade SS sheet, Exterior in 304 grade SSsheet, 60mm in-situ PUF insulation, Forced draft cooling system, suitable to accommodate 1/1 GN,Top to be suitable to accommodate 2x1/1 GN pan, Digital temperature controller, Non corrosive wire shelves, Automatic defrost, Designed and engineered to operate up to 43degree ambient, Cold well cutout to be provided for 2x1/1 GN pan,Unit to be supplied with 2x1/1 GN pan. Connected Load is 0.5Kw, 1 Phase. Temperature is about +1Deg C to +40Deg C. Saladette Pan Size: 2 GN 1/1 PAN X 150MM (Ht.). Utilities are electrical and drainage. This item is Imported type. |
| 28 | Providing, Supplying and Fixing of Counter Mounted Overhead Sneeze With LED Light & Toughened Glass. Dimension : 970W X 350D X 600H mm. SS frame work with slanted toughened glass, SS type 304 grade 16swg, top & glass supports. This item is Custom type. |
| 29 | Providing, Supplying and Fixing of Pipe Tray Slide With Drip Tray. Dimension : 970W X 350D X 50H mm. 4 nos. 25mm dia 16swg ss 304 thick pipes with ends closed at 75mm gap, 2mm ss. sheet brackets with grooves for piped at gaps not exceeding 750mm, fixed to uprights with ss. hardware, Removable ss drip tray pan 20swg sheet to hold any food dropping. This item is Custom type. |
| 30 | Supplying, Installation, Testing and Commissioning of VISI Cooler. Dimension : 585W X 585D X 1855H mm. Make out of MG PRO or ELANPRO,TRUFROST. Model is MG-VPR01. External and internal Back & base Constructed from AISI 304 Stainless steel, Stainless steel wire shelving, Insulated thickness 70mm, Worktop thickness 50MM, Automatic defrost cycle, Anti condensation heaters to be fitted to door mullions, Electronic control with led digital temperature display.Designed and engineered to operate up to 43Deg C ambient, Access to all components from the front, Single compartments closing cabinet with 1 hinged Glass door. Capacity is 340 Ltrs. Connected Load is about 0.3 Kw , 1 Phase. Temperature is likely to +2° to +8° C. Refrigerant R134A will be used. Utilities is electrical. This item is Modular type. |
| 31 | Providing, Supplying and Fixing of Drop In Sink With Faucet. Dimension : 400W X 400D X 250H mm. Drop in sink in 16swg ss sheet with complete overflow system, deep drawn sink will be preferred, All corners coved at 30mm or large radius, Sink joint with top to be seamless and with rounded edges, 38mm dia CP drain waste, Long lever handle required. Mixer Faucet is sensor faucet. CP drain waste - T&S make, Sink location to be verified from equipment layout, Faucet type - T&S make - 5F-8DLX10. Utilities are plumbing and drainage. This item is Custom type. |
| 32 | Supplying, Installation, Testing and Commissioning of Instant Water Boiler. Dimension : 201D X 329W X 473H mm. Make out of ZIP or LINCAT,YPT. Model no. is 405042. It includes Wall mounted instant boiling water appliance, The Econoboil® employs twin chamber boiling water steam-heat-boost technology to recycle energy from steam to pre-heat the incoming cold water, The Econoboil® utilises thermostat temperature control, The Econoboil® is equipped with an external two-way classic tap. Nominal capacity of Boiler is 5.0Ltr. Connected load is about 2.4kw,1Phase. Boiler is to be wall mounted. Utilities are Electrical, Plumbing and Drainage. This item is Imported type. |
| 33 | Supplying, Installation, Testing and Commissioning of Microwave Oven. Dimension : 300W X 539D X 440H mm. Make out of IFB or PANASONIC. Model no. is 30BRC3. It include Stainless steel cavity and LED display, Clock with timer option, 10 power levels and temperature setting, Sensor malfunction protection, over heating protection and child safety lock, Deodorize, cooling feature and keep warm, Express cooking and auto reheat. Capacity of Microwave Oven is 30Ltr. Connected load is 2.2Kw,1 Phase. Utilities is Electrical. This item is Imported type. |
| 34 | Supplying, Installation, Testing and Commissioning of Soiled Dish Table With Pre Wash Sink, Garbage Chute, Side Bracing & Both Side Splash Back. Dimension : 1800W X 750D X 850+100H mm. Sink Size : 500X450X350H mm. It includes Top in 14swg SS sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top sound dampened by an approved method, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19 mm radius at base, Rear side of splash to be closed, Side bracing in 38mm dia x 16 swg ss round tube, Top recessed by 25 mm, 150mm Ø x100mm height garbage chutes, space for garbage bin, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Sink will be include Sink in 16swg ss sheet with complete overflow system, deep drawn sink will be preferred, All corners coved at 30mm or large radius, Sink joint with top to be seamless and with rounded edges, 38mm dia CP drain waste, Long length lever handle for drain waste valve. Drain Waste Valve with lever operated. Pre rinse faucet. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. CP drain waste - T&S make - (B-3940-1) model with Long lever handle and complete overflow connection system, Sink location to be verified from equipment layout. This item is Custom type. |
| 35 | Supplying, Installation, Testing and Commissioning of Wall Mounted Shelf For Glass Rack. Dimension : 1000X450 mm. Shelf in 18 swg S.S 304 sheet, 3 sides bent down 38mm & 12mm , rear & sides bent up 38mm & hemmed 12mm, Brackets 225mm high in 16 swg sheet at a C/C gap not exceeding 600mm, Shelf bent 30Deg toward bottom side,25mm high splash at both side to hold glass rack, Bleeder tube to be attached with the drain, 25mm gap to be provided wasll and shelf rear, Brackets to be bolted to S.S studs on the underside of shelf by dome shaped nuts. This item is Custom type. |
| 36 | Providing, Supplying and Fixing of Mobile Stainless Steel Garbage Bin. Dimension : 450mm Dia, 750H mm. Round shape, Stainless steel brackets, Fabricated with 18swg s.s sheet, Top cover to be made of 22swg thick stainless steel sheets, 4 nos. 100x50mm dia white polyurethane swivel type castors- 2 nos. with brakes. Castors with ss brackets. Corner rubber guard required. This item is Custom type. |
| 37 | Supplying, Installation, Testing and Commissioning of Undercounter Glass Washer. Dimension : 600W X 600D X 720H mm. Make out of IFB or DIHR,OZTI. Model no. is TOP TECH 520. Shock proof composite material pump filter, Wash system with rotating lower arm, Wash system with fixed upper arm, Electronic peristaltic rinse, Archimedes drain system, Electronic peristaltic rinse aid dispenser, Electronic peristaltic detergent dispenser, ProTect environment improvement system, Pro smart electronic inerface, Container Capacity : 1.2Kgs, Removable dripping tray, Proselfself-clean cycle. Connected Load is 3.7Kw,1Hp. Cycle (Secs) is 3(70-110-150). Water consumption(L/Cycle) is 2.4. Rack Size is 500X500mm. Thermo-label compliance required. Utilities are electrical,plumbing and drainage. This item is Imported type. |
| 38 | Providing, Supplying and Fixing of Clean Dish Table Ledges For Glass Rack & Both Side Splash Back. Dimension : 1350W X 800D X 850+100H mm. Top in 16swg thick ss sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top sound dampened by an approved method, top reinforced by 12/25x100x25/12mm channels of 16swgss sheet, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19 mm radius at base, Shelf in 18swg thick ss sheet, 16swg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of undershelf, Side bracing in 38mm dia x 16 swg SS round tube, space for glass washer & Waste bin, 2ledges fully welded to uprights, Suitable to hold Glass Racks, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Include with Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. Utilities are plumbing and drainage. This item is Custom type. |
| 39 | Providing, Supplying and Fixing of Mobile 4 Tier Polymer Shelving. Dimension : 900W X 450D X 1800H mm. Make out of PRORAK or CAMBRO,METRO. VERTICAL POSTS: Made from a Steel Core with Smooth Polypropylene Exterior, TRAVERSES: Made from a Steel Core with Smooth Polypropylene Exterior, FLOOR LEVELERS: Made from Polypropylene, CASTORS: Non Corrosive Plastic Bracket with 127 mm Non-Marking Thermoplastic Rubber Wheels. Capacity is likely to Load bearing 350 kg per shelf. No. of shelves is 4. This item is Modular type. |
| 40 | Supplying, Installation, Testing and Commissioning of Soiled Dish Holding Trolley. Dimension : 1050W X 700D X 850H mm. 250mm deep trough with coved corners in 16swg ss sheet, 38mm dia/16swg SS. round pipe uprights with integrated one price handle bar, Rubber bumpers on all side, 2 nos. 150x50mm polyurethane castors with brakes and 2 nos. fixed castors with ss brackets, All welded construction. PU Castor\"s to have ss 304 brackets. This item is Custom type. |
| 41 | Supplying, Installation, Testing and Commissioning of Mobile Stainless Steel 2 Tier Uniform Hanger Trolley. Dimension : 1350W X 600D X 1950H mm. It includes Construction to be in ss 304 sheet, Rings fasten to the uprights to position the shelf at the desired height,Easy and quick assembly, Payload per shelf of 250 kg, 4 nos. Ø 125 mm swivel casters- 2 nos. with brakes. castors with ss brackets, Exclusive wheel fixing system in the uprights for rigid and reliable mounting, Non-tracing wheels. Pu castors required with ss 304 bracket. This item is Custom type. |
| 42 | Providing, Supplying and Fixing of Soiled Linen Trolley. Dimension : 1050W X 700D X 1200H mm. It Include SS frame work, Detachable Linen bag @ 5\" PU castors with ss 304 brackets, Solid bottom shelf, Easy to clean design for sanitary operation, Suitable to use bulk soiled linens. This item is Custom type. |
| 43 | Providing, Supplying and Fixing of 4 Tier green Epoxy Wire Shelving. Dimension : 750W X 600D X 1800H mm. Make out of PRORAK or METRO. It Include following specs. Shelf made of low carbon steel wire, Wire diameter (mm) - 5.8mm, 25.4 mm round pipe verticals (1.2 mm thick), Production process: Phosphating, Zinc plating, Green Epoxy painted with Anti Bacterial coating, Zinc plating (0.012mm), Epoxy paint (0.08mm), Vertical pipe closed with plastic cap on top, Level adjustable foot, Wire shelf fixed to verticals with clips and are adjustable at 1” incremental, Collapsible, simple assembly, Shelving can be used in wet/high humidity area. Capacity is Load bearing 200 kg per shelf. No. of shelves is 4. Shelving to be NSF Certified. This item is Modular type. |
| 44 | Supplying, Installation, Testing and Commissioning of VISI Cooler. Dimension : 1050W X 585D X 1855H mm. Make out of MG PRO or ELANPRO,TRUFRIST. Model no. is MG-VPRO2. VISI Cooler will be include External and internal Back & base Constructed from AISI 304 Stainless steel, Stainless steel wire shelving, Insulated thickness 70mm, Worktop thickness 50MM, Automatic defrost cycle,Anti condensation heaters to be fitted to door mullions, Electronic control with led digital temperature display, Designed and engineered to operate up to 43Deg C ambient, Access to all components from the front, Double compartments closing cabinet with 2 hinged Glass door. Capacity is 650 Ltrs. Connected Load is 0.3 Kw, 1 Phase. Temperature is about +2° to +8° C. Refrigerant is R134A. Utilities is electrical. This item is Modular type. |
| 45 | Supplying, Installation, Testing and Commissioning of Door Operated Air Curtain. Dimension : 1490W X 208D X 235H mm. Make out of MITZVAH or EURONICS,LABSOL. Model no. is ASP3150AP. It consist 304 grade stainless steel main plate and back plate, Front cover and MOC motor shell in aluminium sheet, ABS blower material, Door activated switch, Fan type: centrifugal, Standard height of curtain formed 8ft. Connected load is 0.1kw,1 Phase. Air Velocity at Nozzle : Discharge - 21/16M/s. RPM in Min. 2800. Utilities is electrical. This item is Modular type. |
| 46 | Providing, Supplying and Fixing of Stainless Steel Console For Services. Dimension : 200W X 200D X 2700H mm. Construction in 16swg thick SS 304 sheet. This item is Custom type. |
| 47 | Providing, Supplying and Fixing of Stainless Steel Wall Flashing. Dimension : 9000W X 2100H mm. It includes 16swg SS 304 sheet, To be fixed at site 4\" ss screw with ss dome cap, Gaps to be filled with silicon. To be Screwed with wall at interval of 450 mm with dome shaped screw heads. This item is Custom type. |
| 48 | Supplying, Installation, Testing and Commissioning of Counter Chiller With 8 Drawers. Dimension : 1770W X 700D X 850H mm. Make out of MG PRO or ELANPRO,TRUFROST. Model is MG-UPRO3H-WE2. It include External and internal constructed from AISI 304 stainless steel, High density 70mm polyurethane insulation with zero ODP, Automatic defrost cycle, Digital controller with on/off switch, Accommodate 1/1 GN size, Designed and engineered to operate up to 43degree C ambient, 3x1/2 & 1X1/3- 8no. drawers with cylinderical lock, Access to all components from the front, To be mounted on 150mm adjustable legs. Capacity is 386Ltrs. Connected Load is 0.63 Kw, 1 Phase. Refrigerant is R134A. Temperature is about 0 Deg C to +4 Deg C. Compressor is Hermatic. Top to be 16 gauge, All constructions including back and base in ss 304 grade, HACCP Compliant. Utilities is electrical. This item is Modular type. |
| 49 | Supplying, Installation, Testing and Commissioning of Infrared Strip Heater (Food Warmer). Dimension : 1372W X 152D X 64H mm. Make out of HATCO or SCHOLL,YPT. Model no. is GRAH-54. The Glo -Ray shall consist of aluminium housing, Unit to be fixed on the lower side of shelf, To come with on and off switch, The infrared heating element shall be tubular metal sheated, The food warmer shall be factory assembled ready for electrical installation, Glo Ray high watt infrared and with Thermostat. Connected Load is 1.56Kw, 1 Phase. Utilities is electrical. This item is Imported type. |
| 50 | Providing, Supplying and Fixing of Stainless Steel Storage Cabinet With Plate Warmer, Middleshelf, Undershelf and Sliding Doors. Dimension : 1500W X 700D X 850H mm. It include Top in 16swg SS sheet bent 50mm on all sides, Top sound dampened by an approved method, Top reinforced by 12/25x100x25/12mm channels of 14swg SS sheet, Shelves in 18swg thick SS sheet, 16swg thick SS hat type channel of size 12/25x100x25/12mm for reinforcement of undershelf/middleshelf, Side/back in 20swg thick SS sheet, Glass-wool insulation, Calcium silicate board below SS top for extra insulation, Air type heating elements fixed in SS perforated channels, control in side panel, Double wall insulated SS sliding door construction in 18swg and 20swg back covering, Top reinforced by SS channels, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. Utilities is electrical. This item is Custom type. |
| 51 | Supplying, Installation, Testing and Commissioning of Counter Chiller With 9 Drawers. Dimension : 1770W X 700D X 850H mm. Make out of MG PRO or ELANPRO,TRUFROST. Model No. is MG-UPRO3-E3. It include External and internal constructed from AISI 304 stainless steel, High density 70mm polyurethane insulation with zero ODP, Worktop to be 16ga. ss 304, Automatic defrost cycle, Digital controller with on/off switch, Accommodate 1/1 GN size, Designed and engineered to operate up to 43degree C ambient, 3X1/3 no. Drawers,Access to all components from the front, To be mounted on 150mm adjustable legs. Capacity is 386Ltrs. Connected Load is 0.77Kw, 1 Phase. Refrigerant is R134A. Temperature is 0 Deg C to +4 Deg C. Air cooled chilling unit, HACCP Compliance, Compressor location needs to be in LHS side. Compressor is Hermatic. Utilities is electrical. This item is Modular type. |
| 52 | Supplying, Installation, Testing and Commissioning of Counter Chiller With 2 Door. Dimension : 1280W X 700D X 850H mm. Make out of MG PRO or ELANPRO, TRUFROST. Model no. is MG UPRO2H. External and internal constructed from AISI 304 stainless steel, High density 70mm polyurethane insulation with zero ODP, Automatic defrost cycle, Digital controller with on/off switch, Accommodate 1/1 GN size, Designed and engineered to operate up to 43degree C ambient, 2 no. doors with cylinderical lock, Shelves: Two SS rod shelves per door, Access to all components from the front, To be mounted on 150mm adjustable legs. Capacity is 245Ltrs. Connected Load is 0.35 Kw, 1 phase. Temperature is about +2 Deg C to +4 Deg C. Refrigerant is R134a. Top to be 16 gauge, All constructions including back and base in ss 304 grade, HACCP Compliant. Utilities is electrical. This item is Modular type. |
| 53 | Supplying, Installation, Testing and Commissioning of Gas Tandoor With Stainless Steel Clading. Dimension : 900W X 900D X 900+50H mm. It includes Steel tank is fabricated with 304 grade 18swg,Stainless steel sheets with an opening for ash outlet with shutter, From inside, a mind steel tank of 18swg is fabricated at a distance of 1\", 1 nos. Canteen High pressure burner, From the outer body of the stainless steel to have an insulation of glass wool, which protects the outer stainless steel body, Four heavy duty Swivel type PU castors with ss 304 brackets two no. with breaks. 4 no. 100mm High sturdy legs to be provided, Flame failure device required. Connected Load is 75000.Utilities are Gas and HVAC. This item is Modular type. |
| 54 | Supplying, Installation, Testing and Commissioning of Seekh Hanger With Drip Tray Below. Dimension : 900mm Long. It includes One no. 20mm dia s.s tube fixed to 14swg s.s brackets on both sides, Wall mounted, Provide 100mm gap from the wall, Removable ss drip tray pan of 20swg sheet to hold any food dropping. This item is Custom type. |
| 55 | Supplying, Installation, Testing and Commissioning of Exhaust Hood With Fresh Air Plenum. Dimension : 4500W X 1300D X 600H mm. Make out of REVAC or SSS. It includes Fabrication in 18swg 304 grade s.s. sheet, Equipped with grease extraction baffle filters 304 SS, Grease drain pan, Channels for fixing of filters, LED lights to be concealed within ss body covered with removable toughened glass, Filters are to be designed to fit in any commercial dishwasher for cleaning, Facility to supply air plenum, Concealed drain pan to collect oil from drain channel, Plennum with large opening at top for connection of supply air duct, Grill construction of extruded aluminum sections. Connected Load is 1.0 Kw , 1 Phase. Duct cutouts to be verified from equipment layout and HVAC consultant. Utilities are electrical and HVAC. This item is Modular type. |
| 56 | Supplying, Installation, Testing and Commissioning of Fire Suppression System. This system is wall Mounted. Make out of SWASTIK or ANSUL,BUCKEYE. Construction: S/S 304 for control panel & stainless steel pipe for the distribution pipe work, Unit should be suitable for item exhaust hood and appliances underneath, Function: Fire suppression system for kitchen grease related cooking appliances, Requires water to assist in the fire protection for exhaust hood, Fully mechanical system, Hybrid dual-agent concept -liquid fire suppressant and water overlapping protection, Alarm switch to be provided, Design /execution to be carried out strictly as per UL300/NFPA norms, Water supply pipe connection 25mm dia (pressure 1 to 1.5bar). Connected Load is 0.1, 1 Phase Ups Supply. Pipe fittings, valves, nozzles, manual pull station and actuator mechanism, System to be UL 300 Compliant or equivalent. Utilities are electrical and HVAC. This item is Modular type. |
| 57 | Supplying, Installation, Testing and Commissioning of Pipe Wall Shelf. Dimension : 1500X375 mm. Shelf in 25 mm dia 16 swg ss 304thick pipes with ends closed at 75 mm gap, Brackets 225mm high in 16 swg sheet at a C/C gap not exceeding 1000mm, 25mm gap to be provided wall and shelf rear, Brackets to be bolted to S.S studs on the underside of shelf by dome shaped nuts. This item is Custom type. |
| 58 | Supplying, Installation, Testing and Commissioning of Four Burner Range With Storage Below. Dimension : 800W X 850D X 850+100H mm. It includes Top in 16swg s.s. sheet bent 50mm and 12mm on all sides excepting on sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16 swg SSsheet, Front in 18swg s.s. sheet , sides / back in 20swg s.s. sheet, Heavy duty removable grates of cast iron to facilitate easy removal of flue and to minimize heating up of cooking range s.s. top, Burner brackets of 0.9mm thick s.s. sheet, Rear splash raised 25mm above the working height of 850mm & bent 25mm with 19 mm radius at base, Rear side of splash to be closed, Shelf 18 swg thickSS sheet, 16swg thick SS hat type channel of size 12/25x100x25/12mm for reinforcement of undershelf, Sides & back in 20 swg SS sheet, Slide out drip trays of 0.9mm thick s.s. sheet with 16swg thick s.s. handle, 2 nos. T 35 (Torch burner) in back side and 2 nos. M-35 (canteen burners) in front side with pilot flame, Brass material burners (United make), Individual needle control valves for burner and pilot flame ; recessed valves, Burner manifold of Ç\"class ERW pipe (as per IS 1259) with 3/8\" Copper inlet, Frame work of 38x38x5mm SS. angles, SS bullet feet of 20mm s.s. round bar with minimum height adjustment of + 20mm, 150mm ground clearance. Connected load is (BTU : 220000). 100 mm offset at back side for LPG line. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. Utilities are Gas and HVAC. This item is Custom type. |
| 59 | Supplying, Installation, Testing and Commissioning of Flat Griddle Plate With Storage Below. Dimension : 1000W X 850D X 850+100H mm. Plate of 18mm thick polished m.s plate for griddle plate welded to 16swg s.s trims, Front in 18swg s.s sheet; sides/back in 20swg s.s sheet, Rear splash raised 100mm above the working height of 850mm& bent 25mm with 19mm radius at base, Rear side of splash to be closed, Flue riser a rear; inside lining of 18swg for double walled construction, Burner brackets of 25x25x3mm s.s angles with facility for easy removal of burners, 3 nos. V shaped ribbon burners of 30000btu\"s / hr. capacity each, Individual needle control valves for each burner and pilot flame; recessed valves, Burner manifold of C class ERW pipe (as per IS 1259) with 3/8\" Copper inlet, Shelf in 18 swg thick SS sheet, Oil collection tray, Sides and back covered in 20ga ss 304 sheet,16 swg thick SS hat type channelof size 12/25x100x25/12mm for reinforcement of undershelf,SS bullet feet of 20mm s.s round bar with minimum height adjustment of 20mm, SS frame work of 38x38x3mm, 150mm ground clearance. Connected Load is 90000 B.T.U. 100 mm offset at back side for LPG line. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. Utilities are Gas and HVAC. This item is Custom type. |
| 60 | Supplying, Installation, Testing and Commissioning of Electrical Single Tank Deep Fat Fryer. Dimension : 400W X 850D X 850+100H mm. Make out of ARGE or SPLENOR. Model is CUSTOM. Top in 16swg s.s 304 sheet with marine bends, bent 50mm and 12mm on all sides excepting sides with splash back, Frying pans sunk in by 25mm; deep cold zone, 20mm ball valve for quick drain off; glasswool insulation, SS wire mesh brackets with plastic coated handle - 1 nos, Swing out type heating element 400V for each frying pan, Kaycee make rotary switch, L &T / Vaishno make indication lights ; 150mm ground clearance, Teflon insulated wiring; 3 core main lead; recessed controls, Under-shelf in 25mmdia ss 304 16swg pipes duly welded, cc 50mm, SS bullet feet of 20mm s.s. round bar with minimum height adjustment of + 20mm, 150mm ground clearance. Capacity is about 7Ltrs.X1. Connected load is 6.0Kw, 3 Phase. Upright in 16SWG 38mm Dia Pipe. Splash Profile is90°. Utilities are electrical and HVAC. This item is Modular type. |
| 61 | Supplying, Installation, Testing and Commissioning of Single Burner With Rear Stock Chinese WOK Range. Dimension : 1200W X 850D X 810+360H mm. Recessed top 25mm in 16swg thick ss sheet bent 50mm and 12mm on all sides with splash back, Rear splash raised 360mm above the working height of 810mm and bent 25mm with 19mm radius a base, Rear side of splash to be closed, Backsplash to be equipped with cold water faucet having controls with knee, Front in 18swg s.s sheet with recessed design, Sides/back in 20swg s.s sheet; both sides with holes for air inlets, Heavy duty round removable grates of cast iron or MS bars; 400mm dia, One T 50 speed jet Burners with individual pilot flames with needle control valves, Burner manifold of C class ERW pipe with 3/8\" copper inlet; s.s bullet feet of 20mm s.s round bar, Main burner shut/on valve, slide out drip trays of 18swg s.s sheets, Drainage with filter for hygiene, front side to have plumbing pipe with water slope towards drain, The plumbing pipe to be covered with removable /open-able ss in 18swg and provided with control valves, Undershelf in 25mm dia ss 304 pipe duly welded, SS bullet feet of 20mm hexagonal bar with minimum height adjustment of 20mm, 150mm ground clearance. 100 mm gap at back for LPG line. Upright in 16SWG 38mm Dia Pipe. Splash Profileis 90°. Utilities are Plumbing, Drainage, Gas and HVAC. This item is Custom type. |
| 62 | Supplying, Installation, Testing and Commissioning of Kitchen Blender (Sound Enclosure). Dimension : 260W X 260D X 647H mm. Make out of WARING or HAMILTON BEACH,SANTOS. Model no. is CB15P. Durable, high-performance stainless steel blade, The stackable, 1 gallon, BPA-free copolyester container makes storage easy, Easy-off, rubberized lid with removable clear cap for adding ingredients and for pressure reduction during hot food blending, Metal-on-metal, stainless steel coupling system for durability and reliability, Durable, full die-cast motor housing with rugged rubber feet to reduce vibration, Easy-to-clean and easy-to-use electronic membrane keypad. Capacity is about 100+drinks or servings per day. Connected Load is 1.8Kw, 1 Phase. Utilities is Electrical. This item is Imported type. |
| 63 | Providing, Supplying and Fixing of Stand For Pizza Oven. Dimension : 1395W X 855D X 950H mm. Make out of SIRMAN. Model No.is VESUVIO 105X70. It includes S/steel construction and external body, Ledges for pizza tray. This item is Custom type. |
| 64 | Supplying, Installation, Testing and Commissioning of 2 Deck Pizza Oven Steam Hood. Dimension : 1395W X 920D X 1050H mm. Make out of SIRMAN. Model no. is VESUVIO 105X70 EL 2C. It include S/steel construction, Stainless steel door with double glass window, Digital control panel, Air vent with shutter, It is possible to check the temperature inside the chamber by means of a thermometer, Heating of the upper and lower elements is adjustableby means of 2 separate symostats, Double interior lighting, Refractory brick deck, Fumes and vapor chimney. Connected Load is 18kw, 3Phase. Utilities is Electrical. This item is Imported type. |
| 65 | Supplying, Installation, Testing and Commissioning of High Speed Oven. Dimension : 406W X 537D X 587H mm. Make out of MERRYCHEF or TURBOCHEF,UNOX. Model No. is e3. It includes Stainless steel constuction, Simple operation with easyTouch, Touchscreen control, Up to 5 x faster preparation times, Download recipes via the USB port, Cooking carousel for even browning, Exhaust vent at rear of unit. Capacity is 34Ltrs / 1.2 Cubic Ft. Connected Load is 4.7 Kw, 1 Phase. Utilities is Electrical. This item is Imported type. |
| 66 | Supplying, Installation, Testing and Commissioning of 3 Door Counter Chiller With Drop In Cold Pans. Dimension : 1770W X 700D X 850H mm. Make out of MG PRO or ELANPRO, TRUFROST. Model no. is MG-SPRO3. It include External and internal in AISI 304 stainless steel, Worktop thickness 50mm, fitted with cut-out for n. 7GN 1/4containers (not included) and stainless steel lid, Insulation thickness 90mm,N. 3 full doors, Internal LED light, Built-in refrigeration unit, Ventilated operating mode, Electronic microprocessor control with external digital temperature display, Automatic defrost. Capacity is 590Ltrs. Connected Load is 0.25kw , 1 Phase. Refrigerant is R290. Temperature is about +2Deg C To +4Deg C. We need cutout for the cold pan, Top needs to be in 16ga ss 304 sheet, All construction including back and base needs to be in ss 304 grade. Utilities is Electrical. This item is Imported type. |
| 67 | Providing, Supplying and Fixing of Filler Table. Dimension should be as per actual site. It include Top in 16swg thick SS sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16swg SS sheet, Top sound dampened by an approved method, Rear splash raised 100mm above the work top and bent 25mm with 19 mm radius at base, Rear side of splash to be closed. This item is Custom type. |
| 68 | Supplying, Installation, Testing and Commissioning of Centrifugal Juicer. Dimension : 330W X 562D X 606H mm. Make out of SANTOS or SAMMIC, WARING. Model no. is #68. It include Made of sturdy and food safe quality materials : stainless steel (bowl, filter-basket),Polyethylene (pusher, pulp container), polycarbonate (cover), black rubber (seals), Easy to remove and to put in position without any tool, Stainless steel bowl and filter-basket are easy to remove for cleaning (Just lift up the two parts), Mechanical safety: A friction brake immediately stops the basket when opening, On / Off interlock switch detects overloading and no voltage, Automatic Pulp ejection. Pulp container capacity is 3.25 liter. Utilities is Electrical. This item is Imported type. |
| 69 | Supplying, Installation, Testing and Commissioning of Cold Press Juice. Dimension : 233W X 412D X 640H mm. Make out of SANTOS or KUVING,SAMMIC. Model no. is #65. Made of sturdy and food safe quality materials: stainless steel (bowl, filter-basket), Polyurethane (pusher pulp container), polyurethane (cove), black rubber (seals), Easy to remove and to put in position without any tool, Stainless steel bowl and filter-basket are easy to remove for cleaning (just lift up the two part), Mechanical safety; A friction brake immediately stops the basket when opening, On/Off interlock switch detects overloading and no voltage, Automatic Pulp ejection. Connected Load is 0.65Kw, 1Phase. Speed is about 5 to 80 rpm. Pulp container 4 liters. Utilities is Electrical. This item is Imported type. |
| 70 | Supplying, Installation, Testing and Commissioning of Counter Chiller With 4 Drawers. Dimension : 1280W X 700D X 850H mm. Make out of MG PRO or ELANPRO,TRUFROST. Model no. isMG-UPRO2H. It include External and internal constructed from AISI 304 stainless steel, High density 70mm polyurethane insulation with zero ODP, Automatic defrost cycle, Digital controller with on/off switch, Accommodate 1/1 GN size, Designed and engineered to operate up to 43degree C ambient, 2X1/2 - 4no. drawers with cylinderical lock, Access to all components from the front, To be mounted on 150mm adjustable legs. Top to be 16 gauge, All constructions including back and base in ss 304 grade, HACCP Compliant. Capacity is 245Ltrs. Connected load is 0.4 Kw, 1 Phase. Refrigerant is R134A. Temperature is about 0 Deg C to +4 Deg C. Utilities is Electrical. This item is Modular type. |
| 71 | Supplying, Installation, Testing and Commissioning of 4 Slot POP UP Toaster. Dimension : 291W X 330D X 233H mm. Make out of TOASTMASTER or HATCO, ROLLERGRILL. Model no. is TP 430. It includes Pop-Up 4-slice Bread Toaster, 1-1/8\" wide x 5-1/4\" long slots, Solid-state timer controls, Brushed stainless steel finish, Removable crumb tray. Capacity is about 300 slices/hour. Connected Load is 2.6Kw,1 Phase. Utilities is Electrical. This item is Imported type. |
| 72 | Supplying, Installation, Testing and Commissioning of Sandwich Griller. Dimension : 380W X 435D X 235H mm. Make out of SIRMAN or ROLLERGRILL, NEUMARKER. Model no. is CORT RR. It includes Cast iron plates with ceramic coating treatment, Highest sturdiness and life time, Perfect thermal conductivity, Very easy to clean, Adjustable upper plates, Self balancing upper plate, Shock-proof coated heating elements, adherent to the plates for a perfect thermal conductivity. Connected Load is 2.1Kw, 1 Phase. Utilities is Electrical. This item is Imported type. |
| 73 | Supplying, Installation, Testing and Commissioning of Chest Type Freezer. Dimension : 565W X 545D X 850H mm. Make out of BLUESTAR or CELFROST, VOLTAS. Model no. is CHFSD100FHPW. It include Corrosion resistant body made of pre-coated sheets, High energy-efficient compressor, Hard top, Lockable lid, High density PUF insulation for better holding time, Robust construction for heavy duty use, Tropicalised for high ambient temperatures, LED indicator for power and compressor function. Capacity is 100TRS. Connected Load is 1.0Kw,1 Phase. Temperature is likely to be -24° C to +8° C. Refrigerant is R600a. Compressor is hermatic. Utilities is Electrical. This item is Modular type. |
| 74 | Providing, Supplying and Fixing of Gravity Slicer. Dimension : 545W X 710D X 547H mm. Make out of SIRMAN or BERKEL, ELECTROLUX. Model no. is PALLADIO 300. It includes Rounded design, no sharp edges and visible screws, Chrome plated and ground slide rod, Lapped cast iron slide rod bushing, Vulcanized rubber stops on carriage, Stainless steel slice deflector with bayonet fitting, Stainless steel screws and fittings, Bottom cover, Removable support cover for thickness gauge plate, Hard-chromed forged scoop knife, Built in sharpening tool with bottom protection, Professional slicer with ring, carriage lock and blade removal tool, Bearing-mounted slide plate, Heavy duty, ventilated motor. Connected Load is 0.28Kw, 1 Phase. Utilities is Electrical. This item is Imported type. |
| 75 | Supplying, Installation, Testing and Commissioning of Planetary Mixer. Dimension : 490W X 600D X 740H mm. 10 KG Counter Top. Make out of HOBART or STENO, UNIVEX. Model no. is HL 120. It include 5-minute SmartTimer™, Ergonomic swing-out bowl, Shift-on-the-Fly™ controls, Single point bowl installation, #12 attachment hub, Metallic grey hybrid powder coat finish, 12 quart (11 litre)capacity bowl made of stainless steel. Capactity is 11Ltrs. Connected Load is 0.37kw, 1 Phase. Utilities is Electrical. This item is Imported type. |
| 76 | Supplying, Installation, Testing and Commissioning of Mobile 4 Tier Stainless Steel Shelving. Dimension : 600W X 600D X 1800H mm. All welded construction, 4 Nos. of shelves, Shelves in 18swg thick ss sheet, 16ga ss hat type channel of size 12/25x100x25/12mm for reinforcement of shelves, SS hardware, Both sides of shelves to be polished, 4 nos. swivel casters - 100mm dia x 50mm; 2 nos. with brakes,Castors to have SS brackets, 150mmgroundclearance. PU Castors with ss 304 brackets. This item is Custom type. |
| 77 | Supplying, Installation, Testing and Commissioning of Two Door Upright Chiller. Dimension : 700W X 840D X 2000H mm. Make out of MG PRO or ELANPRO, TRUFROST. Model no. is MG-CPRO600H. External and internal constructed from AISI 304 stainless steel, High density 70mm polyurethane insulation with zero ODP, Automatic defrost cycle, Anti condensation heaters to be fitted to door mullions, Self closing doors with left side hinges, Electronic control with LED digital temperature display, Designed and engineered to operated up to 43degree ambient, Single compartment with 2 half doors, Shelves: SS rod shelves, Access to all components from the front, To be mounted on 150mm adjustable legs. Capacity is 600Ltrs. Connected Load is 0.73Kw, 1 Phase. Refrigerant is R134A. Temperature is about +2 Deg C to +6 Deg C. Compressor is Hermatic. Air cooled chilling unit, CFC and HCFC free, HACCP Compliant. Utilities is Electrical. This item is Modular type. |
| 78 | Supplying, Installation, Testing and Commissioning of Two Door Upright Freezer. Dimension : 700W X 840D X 2000H mm. Make out of MG PRO or ELANPRO, TRUFROST. Model no. is CPRO600L. It include External and internal constructed from AISI 304 stainless steel, High density 70mm polyurethane insulation with zero ODP, Worktop thickness 50mm, Automatic defrost cycle, Anti condensation heaters to be fitted to door mullions, Self closing doors, Electronic control with LED digital temperature display, Designed and engineered to operate up to 40Deg C ambient, 1 Compartments with 2 doors, Access to all components from the front. Capacity is 530Ltrs. Connected Load is 0.74Kw, 1 Phase. Refrigerant is R404a. Temperature is -18Deg C to -20Deg C. Compressor isHermatic. Air cooled chilling unit, CFC and HCFC free, HACCP Compliant. Utilities is Electrical. This item is Modular type. |
| 79 | Providing, Supplying and Fixing of Mobile Incredient Bins. Dimension : 600W X 600D X 750H mm. Construction in 18swg ss sheet, Removable lid in 18swg thick ss sheet in two parts, hinged together, 18swg thick ss 304 hinged lid at top, All corner duly coved, 2 nos. ss. channels at base for fixing castor\"s, 4 nos. 100x50mm dia white polyurethane swivel type castor\"s - 2 nos. with brakes, Castor\"s to be with ss brackets. This item is Custom type. |
| 80 | Supplying, Installation, Testing and Commissioning of Walk In Chiller. Dimension : 2500W X 2300D X 2600H mm. Make out of ICOLD or CELFROST, RINAC. Model no. is CUSTOM. It include Die formed 60mm thick wall, corner, partition, \"T\" & ceiling PUF panels in (0.5mm) & 0.8mm thick all interior surfaces as well as exposed exterior surfaces. And pre coated finish for exterior surfaces against the walls, Interior panels in SS 304 garde, Exterior panels in white color bond/PVC, Wall to wall, wall to floor wall to ceiling cam lock ; coved corner & round edges, Doors to be hinged as shown in the plans, should have TIG welded corners, heating elements, extruded PVC gaskets,removable sill wipers, 03 hinges, heavy duty latches with interior safety release, Built in cylindrical lock with cam lift type self closing door, man inside push button & audio visual alarm ; High temperature audio visual alarm, 2 Qty Vapour proof room light (400 Lux evenly distributed), shatter proof & factory mounted, pre wired light switches to be weather proof & unbreakable with pilot lights on interior & exterior, Wall Trap make : Viega :-5636.1 to be supplied with open-able SS304a box of size 100X80X400mm(WxDxH), Temperature controller to have remote access & connection with Hotel\"s BMS, Inwards ramp if sunken floor not available/as per site condition, Complete installation including without limitation, enclosure panels. Trim, caulking & sealing.king & sealing. Refrigerant is R134A. Connected load is 1.5TPN, 3 Phase. Temperature is 0 to +4 Deg C. Compressor is Semi Hermatic. 1 no light to have emergency power backup, Provision for IP65 MCB to be considered by OEM, Altro flooring & Strip curtain required. Refrigeration systems to be placed on compressor racks, CFC free refrigerant, Air cooled chilling unit, 900 MM High 16 SWG Stainless Steel kickplate to be provided both side of the door. Utilities are Electrical and Drainage. This item is Modular type. |
| 81 | Supplying, Installation, Testing and Commissioning of Walk In Freezer. Dimension : 2500W X 1700D X 2600H mm. Make out of ICOLD or CELFROST, RINAC. Model no. is CUSTOM. It include Die formed 100mm thick wall, corner, partition, \"T\" & ceiling PUF panels in (0.5mm) & 0.8mm thick all interior surfaces as well as exposed exterior surfaces. And pre coated finish for exterior surfaces against the walls, Exterior panels in white color bond/PVC, Interior panels in SS 304 sheet construction, Wall to wall, wall to floor wall to ceiling cam lock ; coved corner & round edges, Doors to be hinged as shown in the plans, should have TIG welded corners, heating elements, extruded PVC gaskets,removable sill wipers, 03 hinges, heavy duty latches with interior safety release, Built in cylindrical lock with cam lift type self closing door, man inside push button & audio visual alarm ; High temperature audio visual alarm, 2 Qty Vapour proof room light (400 Lux evenly distributed), shatter proof & factory mounted, pre wired light switches to be weather proof & unbreakable with pilot lights on interior & exterior, Wall Trap make : Viega :-5636.1 to be supplied with open-able SS304a box of size 100X80X400mm(WxDxH), Temperature controller to have remote access & connsection with Hotel\"s BMS, Complete installation including without limitation, enclosure panels. Trim, caulking & sealing.king & sealing. 1 no light to have emergency power backup, Provision for IP65 MCB to be considered by OEM, Altro flooring & Strip curtain required. Refrigeration systems to be placed on compressor racks, CFC free refrigerant, Air cooled chilling unit, 900 MM High 16 SWG Stainless Steel kickplate to be provided both side of the door. Refrigerant is R404A. Connected load is 2.5 TPN, 3 Phase. Temperature is likely -16 to -24 Deg C. Compressor is Semi Hermatic. Utilities are Electrical and Drainage. This item is Modular type. |
| 82 | Providing, Supplying and Fixing of Mobile 4 Tier Stainless Steel Shelving. Dimension : 1200W X 600D X 1800H mm. Make out of SARAS INDIA or METRO. It include Shelf made of SS 304, Production process: Electro polishing, Vertical pipe closed with plastic cap on top, Level adjustable foot, Wire shelf fixed to verticals with clips and are adjustable at 1” incremental, Load bearing - 200 kg approx per shelf evenly distributed, Collapsible, simple assembly, Comes in cardboard packing. Easy to transport and handle, Shelving can be used in most aggressive applications and environments. Need Castors with ss brackets. No. of Shelves is 04. This item is Modular type. |
| 83 | Providing, Supplying and Fixing of Mobile 4 Tier Stainless Steel Shelving. Dimension : 1000W X 600D X 1800H mm. Make out of SARAS INDIA or METRO. It include Shelf made of SS 304, Production process: Electro polishing, Vertical pipe closed with plastic cap on top, Level adjustable foot, Wire shelf fixed to verticals with clips and are adjustable at 1” incremental, Load bearing - 200 kg approx per shelf evenly distributed, Collapsible, simple assembly, Comes in cardboard packing. Easy to transport and handle, Shelving can be used in most aggressive applications and environments. Need Castors with ss brackets. No. of Shelves is 04. This item is Modular type. |
| 84 | Providing, Supplying and Fixing of Mobile 4 Tier Stainless Steel Shelving. Dimension : 900W X 600D X 1800H mm. Make out of SARAS INDIA or METRO. It include Shelf made of SS 304, Production process: Electro polishing, Vertical pipe closed with plastic cap on top, Level adjustable foot, Wire shelf fixed to verticals with clips and are adjustable at 1” incremental, Load bearing - 200 kg approx per shelf evenly distributed, Collapsible, simple assembly, Comes in cardboard packing. Easy to transport and handle, Shelving can be used in most aggressive applications and environments. Need Castors with ss brackets. No. of Shelves is 04. This item is Modular type. |
| 85 | Supplying, Installation, Testing and Commissioning of Three Sink POT Wash Unit With Side Bracing & Both Side Splash Back. Dimension : 1800W X 700D X 800+200H mm. It includeTop in 14swg ss sheet bent 50mm and 12mm on all side excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, top sound dampened by an approved method, Rear splash raised 200mm above the working height of 800mm & bent 25mm with 19mm radius at back, Rear side to be closed, Front to be covered with ss apron in 18ga ss 304 sheet, Side bracingin 38mm dia x16swg ss round sheet, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Sink in 16swg ss sheet with complete overflow system, deep drawn sink will be preferred, All corners coved at 30mm or large radius, Sink joint with top to be seamless and with rounded edges, 38mm dia CP drain waste, Long length lever handle for drain waste valve. Drain Waste Valve quantity is 2 and it is lever operated. Mixer Faucet is wall mounted. Upright in 16SWG 38mm Dia Pipe with Splash profile is 90°. CP drain waste - T&S make - (B-3940-1) model with Long lever handle and complete overflow connection system, Sink location to be verified from equipment layout, Sink Size : 550X550X400H mm, 3 side bracing with front side open and back side bracing 300mm high from ffl. Utilities is Drainage. This item is Custom type. |
| 86 | Providing, Supplying and Fixing of POT/PAN Hanger. Dimension : 900W X 400D mm. It include Mounted at 1600mm AFFL, 3 nos. 25m OD s.s pipes with s.s hooks, 25mm x14swg ss brackets, 12nos. s shaped pot hooks. This item is Custom type. |
| 87 | Supplying, Installation, Testing and Commissioning of Pre Rinse Spray Unit With Swivel Faucet. It is Wall Mounted. Make out of T&S or FRICOSMOS, FISHER. Model no. is 5PR-8W12. It include 8\" wall mount mixing faucet with polished chrome plated brass body, add-on faucet with ceramic cartridge and lever handle, 12\" swing nozzle with laminar flow device, 18\" riser, 44\" flexible stainless steel hose with resistant handle, Ceramic cartridges, lever handles, in-line check valves, 1/2\" NPT female inlets, 6\" adjustable wall bracket, spray valve holder and overhead spring, Pressure Max: 125 psi (8.62bar), Pressure Min: 20psi (1.38bar), Spray Valve Flow: 4.35L/min), Nozzle Flow: (16.24 L/min), Unit suitable for mixing hot & cold water. Unit to be supplied with complete set of installation kit. Utilities is Plumbing. This item is Imported type. |
| 88 | Supplying, Installation, Testing and Commissioning of 4 Tier Soiled POT Rack. Dimension : 1000W X 600D X 1650H mm. It include All welded construction, Upright is 38mm dia, shelves to have vertical pipe in 25mm dia. at 100mm CC, SS. hardware in 18swg, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. This item is Custom type. |
| 89 | Supplying, Installation, Testing and Commissioning of 4 Tier Soiled POT Rack. Dimension : 900W X 600D X 1650H mm. It include All welded construction, Upright is 38mm dia, shelves to have vertical pipe in 25mm dia. at 100mm CC, SS. hardware in 18swg, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. This item is Custom type. |
| 90 | Supplying, Installation, Testing and Commissioning of 4 Tier Soiled POT Rack. Dimension : 750W X 600D X 1650H mm. It include All welded construction, Upright is 38mm dia, shelves to have vertical pipe in 25mm dia. at 100mm CC, SS. hardware in 18swg, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. This item is Custom type. |
| 91 | Supplying, Installation, Testing and Commissioning of L-Shape Soiled Dish Table With Pre Wash Sink, Side Bracing & Pipe Tray Slide. Dimension : 1800X600+900X700X850+100H mm. Sink Size is 500W X 450D X 350H mm. Pipe Tray Slide is 1800X400 mm. It include Top in 14swg thick ss sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, top sound dampened by an approved method, Top recessed by 25mm, Rear splash raised 100mm above the working height of 850mm & bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelf in 18swg thick ss sheet, 16swg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of undershelf, Tray slide to be provided at front of the equipment, Extra support for tray slide, 16swg 25mm dia SS round pipe 304 thick pipes at gaps not exceeding 75mm, fixed to upright with ss hardware, Side bracing in 25mm dia 16swg ss round pipe, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Sink in 16swg ss sheet with complete overflow system, deep drawn sink will be preferred, All corners coved at 30mm or large radius, Sink joint with top to be seamless and with rounded edges, 38mm dia CP drain waste, Long length lever handle for drain waste valve. Drain Waste Valve is 1 with lever operated. Mixer Faucet is Pre rinse or Deck mounted. Upright in 16SWG 38mm Dia Pipe. Splash Profile is90°. CP drain waste - T&S make - (B-3940-1) model with Long lever handle and complete overflow connection system, Sink location to be verified from equipment layout, Front and side of the table to be covered. Utilities is Drainage. This item is Custom type. |
| 92 | Providing, Supplying and Fixing of Double Overhead Shelf For Glass Rack. Dimension : 1800X550X450+200X600+200H mm. It include Shelves in 550mm deep 18swg 304 AISI s.s sheet, 75mm wide x 75mm high V channel on both side, 25mm OD ss pipe uprights fixed to 18swg thick s.s channels welded to the underside of shelves, Gussets of ss rounds, Bleeder tube required diagonally on either side of the overhead shelf, 25mm OD ss pipe rest in middle for glass racks, Extra uprights to be provided for overhead shelf wider than 1500mm. This item is Custom type. |
| 93 | Supplying, Installation, Testing and Commissioning of Hood Type Dish Washer. Dimension : 640W X 740D X 1480H mm. Make out of IFB or DIHR,OZTI. Model no. is PROTECH 813. It include The Hood dishwasher is packed with features such as hood opening of 40 cm, Wash tank configuration which permits washing of gastronorm and euronorm trays and also uses a special 22-plate 50 x 50 wire rack that boosts theoretical productivity to around 1000 plates/hour, It features a fully moulded tank with ProStrain integral light composite material surface strainer, particularly resistant to impact and chemical attack, With a double filter on wash pump suction, it can be installed in a corner without the need for modifications or additional elements. Capacity is about 60racks/hr. Connected Load is 7.4Kw. Thermo-label compliance required. Utilities are Electrical, Plumbing and Drainage. This item is Imported type. |
| 94 | Supplying, Installation, Testing and Commissioning of Vapour Hood. Dimension : 1000W x 1000 D X 400H mm. Make out of REVAC or SSS. It include Shall be constructed entirely in 18swg type 304 stainless steel, VADV hoods are designed to remove the steam released by dish washing equipments, They are equipped with specially deflectors to separate the moisture from the extracted air, Removable deflectors easy to clean in dishwasher. Connected load is 1.0Kw, 1 Phase. Utilities are Electrical and HVAC. This item is Modular type. |
| 95 | Supplying, Installation, Testing and Commissioning of Under Counter Glass Washer. Dimension : 440W X 530D X 700H mm. Make out of IFB or DIHR,OZTI. Model no. is PRO TECH 410. It include Shock proof composite material pump filter, Wash system with rotating lower arm, Wash system with fixed upper arm,Electronic peristaltic rinse, Archimedes drain system, Electronic peristaltic rinse aid dispenser, Electronic peristaltic detergent dispenser, ProTect environment improvement system, Pro smart electronic inerface, Container Capacity : 1.2Kgs, Removable dripping tray, Proselfself-clean cycle. Connected load is 3.7Kw, 1 Phase. Cycle in secs is 3(90-120-150). Water consumption (L/Cycle) is 1.9. Rack size is 38.5X38.5 CM. Thermo-label compliance required. Utilities are Electrical, Plumbing and Drainage. This item is Imported type. |
| 96 | Providing, Supplying and Fixing of Mobile 4 Tier Polymer Shelving. Dimension : 750W X 600D X 1800H mm. Make out of SARAS INDIA or CAMBRO, METRO. Model no. is PRORAK. It include VERTICAL POSTS: Made from a Steel Core with Smooth Polypropylene Exterior, TRAVERSES: Made from a Steel Core with Smooth Polypropylene Exterior, FLOOR LEVELERS: Made from Polypropylene, CASTORS: Non Corrosive Plastic Bracket with 127 mm Non-Marking Thermoplastic Rubber Wheels. Capacity is load bearing 350kg per shelves. No. of shelves is 4. This item is Modular type. |
| 97 | Supplying, Installation, Testing and Commissioning of Ice Cuber Self Contained (240 KG). Dimension : 704W X 685D X 1510H mm. Make out of HOSHIZAKI or ITV, SCOTSMAN. Model no. is IM240M2E. It include All 304-series stainless steel construction, Integrated door handles, Removable door gaskets, Easily cleanable air filter, Foam injected polyurethane for outstanding insulation (HFC free), Ice machines are micro computer controlled. Capacity is 240Kg/24h. Connected load is 1.3Kw, 1 Phase. Large Cube Ice Cube-17g-28X28X32 mm. Utilities are Electrical, Plumbing and Drainage. This item is Imported type. |
| 98 | Supplying, Installation, Testing and Commissioning of Mobile HotHolding Cabinet. Dimension : 540W X 810D X 960H mm. Make out of SCANBOX or ALTOSHAM, OZTI. Model no. is H6. It include Cart for holding and transportation of food with GN 1/1 Capacity, Stainless steel Interior, Exterior Fiber glass plastic and aluminum profile, Door opening 270deg with a magnet to keep door at fixed position, Rack detachable laser cut U-shaped runner in stainless steel, Top bumper is stainless steel, Temperature range Upto 90Deg C, 4 nos. Polyurethane castor, 2 with brake and 2 nos without brakes. Capacity is 6X1/1GN. Connected load is 1.8 Kw, 1 Phase. Temperature is Upto 90Deg C. Castors with ss 304 brackets required. Utilities is Electrical. This item is Imported type. |
| 99 | Supplying, Installation, Testing and Commissioning of Drop In Induction Warmer. Dimension : 300W X 450D X 57H mm. Make out of HATCO or DIPO,YPT. Model no. is IWRM-B1-1313-05. It include Made of approved food material, Pan Sense Technology (PST), Black glass-ceramic top, Automatic shut-off, Remote control panel. Connected Load is 0.5Kw, 1 Phase. Induction compatible chaffing dish top with ceramic inserts, 03 qty each 1/1, 1/2 & 1/3GN. Utilities is Electrical. This item is Imported type. |
| 100 | Supplying, Installation, Testing and Commissioning of Counter MountedOverhead Bridge, Sneeze Guard With LED Light. Dimension : 1460W X 345D X 600H mm. It include Sneeze guard with 12volts LED spotlight all separately switchable, Ready to connect table or fixed mounting version in stainless steel or coloured powder coating, All electrical components are CE approved, Single side curved TSG (Toughened Safety Glass). Connected load is 5A, 1 Phase. Utilities is Electrical. This item is Imported type. |
| 101 | Supplying, Installation, Testing and Commissioning of Drop In Frost Top With Dekton Surface. Dimension : 1354W X 494D X 511H mm. Make out of HATCO or COUNERLINE, HOELLER. Model no. is FTB-S2. Frost Top is specially-designed to safely hold pre-chilled food products at optimum serving temperatures without drying it out, Stainless steel body, Recessed walls designed to prevent food pan slippage, Accommodates full-size and half-size sheet pans, Auto-defrost, The condensing unit, mounted on the center of the unit, Electronic adjustable temperature controller, Drain simplifies cleaning and flat drain strainer ensures pans set flush. Connected Load is 0.8Kw, 1 Phase. Temperature is about-5° to + 15° C. Coordinate with ID for correct Dekton shade as per counter stone. Utilities are Electrical and Drainage. This item is Imported type. |
| 102 | Providing, Supplying and Fixing of Unpacking Table With Undershelves & Both Side Splash Back. Dimension : 1800W x 700D X 850+100H mm. It include Top in 16 swg thick SS sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16swg SS sheet, top sound dampened by an approved method, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelves in 18 swg thick SS sheet, 16 swg thick SS channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. This item is Custom type. |
| 103 | Providing, Supplying and Fixing of Spreader Top With Undershelves. Dimension : 600W x 700D X 850H mm. It include Top in 16swg thick SS sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16swg SS sheet, Top sound dampened by an approved method, Shelves in 18 swg thick SS sheet, 16 swg thick SS hat type channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf. +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. This item is Custom type. |
| 104 | Providing, Supplying and Fixing of Spreader Top With GN1/1 Compatible Drawer & Undershelf. Dimension : 450W X 900D X 900+50H mm. It Include Top in 16 swg thick SS sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16swg SS sheet, top sound dampened by an approved method, Rear splash raised 50mm above the working height of 900mm and bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelf in 18 swg thick SS sheet, 16 swg thick SS channel of size 12/25x100x25/12mm for reinforcement of undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Front double walled in 18 swg thick SS sheet with built in handle, Arrangement for cylinder lock, heavy duty telescopic ss 304 channel with removable drawer, Sliding channels concealed in 0.9mm thick SS sheet outer paneling, Drawer to be designed for GN 1/1 pan, 150mm height. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. This item is Custom type. |
| 105 | Providing, Supplying and Fixing of Spreader Top With Undershelves. Dimension : 450W X 850D X 850+100H mm. It include Top in 16swg thick SS sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16 swg SS sheet, Top sound dampened by an approved method, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelves in 18 swg thick SS sheet, 16 swg thick SS hat type channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. 100 mm offset at back side for PNG line. This item is Custom type. |
| 106 | Providing, Supplying and Fixing of Spreader Top With Undershelves. Dimension : 600W X 850D X 850+100H mm. It include Top in 16swg thick SS sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16swg SS sheet, Top sound dampened by an approved method, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelves in 18 swg thick SS sheet, 16 swg thick SS hat type channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. 100 mm offset at back side for PNG line. This item is Custom type. |
| 107 | Providing, Supplying and Fixing of Work Table With Drawers For Pizza Dough & Undershelf. Dimension : 1500W X 850D X 850H mm. It Include Top in 16 swg thick SS sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16swg SS sheet, top sound dampened by an approved method, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelf in 18 swg thick SS sheet, 16 swg thick SS channel of size 12/25x100x25/12mm for reinforcement of undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Front double walled in 18 swg thick SS sheet with built in handle, Arrangement for cylinder lock, heavy duty telescopic ss 304 channel with removable drawer, Sliding channels concealed in 0.9mm thick SS sheet outer paneling, Drawer to be designed for GN 1/1 pan, 150mm height. Upright in 16SWG 38mm Dia Pipe. Splash Profile 90°. This item is Custom type. |
| 108 | Providing, Supplying and Fixing of Work Table With Undershelves. Dimension : 1100W X 700D X 850+100H mm. It include Top in 16swg thick SS sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16swg SS sheet, top sound dampened by an approved method, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelves in 18 swg thick SS sheet, 16 swg thick SS channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. This item is Custom type. |
| 109 | Providing, Supplying and Fixing of Work Table With Undershelves & RHS Splash Back. Dimension : 2050W X 700D X 850+100H mm. It include Top in 16 swg thick SS sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16swg SS sheet, top sound dampened by an approved method, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelves in 18 swg thick SS sheet, 16 swg thick SS channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. This item is Custom type. |
| 110 | Providing, Supplying and Fixing of Work Table With Undershelves & Both Side Splash Back. Dimension : 1050W X 700D X 850+100H mm. It include Top in 16 swg thick SS sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16swg SS sheet, top sound dampened by an approved method, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelves in 18 swg thick SS sheet, 16 swg thick SS channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. This item is Custom type. |
| 111 | Providing, Supplying and Fixing of Clean Dish Table With Undershelves & RHS Splash Back. Dimension : 1100W X 600D X 850+100H mm. It include Top in 16swg thick SS 304 sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top reinforced by 12/25x100x25/12mm channels of 16swg SS 304 sheet, Top sound dampened by an approved method, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelf in 18 swg thick SS sheet, 16 swg thick SS channel of size 12/25x100x25/12mm for reinforcement of middleshelf & undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. This item is Custom type. |
| 112 | Providing, Supplying and Fixing of Mobile Work Table With Undershelves. Dimension : 1000W X 600D X 850+100H mm. It include Top in 16 swg thick SS sheet bent 50mm, Top reinforced by 12/25x100x25/12mm channels of 16swg SS sheet, top sound dampened by an approved method, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelves in 18 swg thick SS sheet, 16 swg thick SS channel of size 12/25x100x25/12mm for reinforcement of midleshelf/undershelf, 4 nos. 100x50mm casters with ss brackets, two with brakes, 150mm Ground clearence. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. Pu castors with ss 304 bracket. This item is Custom type. |
| 113 | Providing, Supplying and Fixing of Wall Shelf. Dimension : 1800X375 mm. It include Shelf in 18 swg S.S 304 sheet, 3 sides bent down 38mm & 12mm , rear & sides bent up 38mm & hemmed 12mm, Brackets 225mm high in 16 swg sheet at a C/C gap not exceeding 1000mm, 25mm gap to be provided wall and shelf rear, Brackets to be bolted to S.S studs on the underside of shelf by dome shaped nuts. This item is Custom type. |
| 114 | Providing, Supplying and Fixing of Wall Shelf. Dimension : 550X350 mm. It include Shelf in 18 swg S.S 304 sheet, 3 sides bent down 38mm & 12mm , rear & sides bent up 38mm & hemmed 12mm, Brackets 225mm high in 16 swg sheet, 25mm gap to be provided wall and shelf rear, Brackets to be bolted to S.S studs on the underside of shelf by dome shaped nuts. This item is Custom type. |
| 115 | Providing, Supplying and Fixing of Wall Shelf. Dimension : 1500X375 mm. It include Shelf in 18 swg S.S 304 sheet, 3 sides bent down 38mm & 12mm , rear & sides bent up 38mm & hemmed 12mm, Brackets 225mm high in 16 swg sheet at a C/C gap not exceeding 1000mm, 25mm gap to be provided wall and shelf rear, Brackets to be bolted to S.S studs on the underside of shelf by dome shaped nuts. This item is Custom type. |
| 116 | Providing, Supplying and Fixing of Wall Shelf. Dimension : 2400X375 mm. It include Shelf in 18 swg S.S 304 sheet, 3 sides bent down 38mm & 12mm , rear & sides bent up 38mm & hemmed 12mm, Brackets 225mm high in 16 swg sheet at a C/C gap not exceeding 1000mm, 25mm gap to be provided wall and shelf rear, Brackets to be bolted to S.S studs on the underside of shelf by dome shaped nuts. This item is Custom type. |
| 117 | Providing, Supplying and Fixing of Wall Shelf. Dimension : 800X375 mm. It include Shelf in 18 swg S.S 304 sheet, 3 sides bent down 38mm & 12mm , rear & sides bent up 38mm & hemmed 12mm, 25mm gap to be provided wall and shelf rear, Brackets to be bolted to S.S studs on the underside of shelf by dome shaped nuts. This item is Custom type. |
| 118 | Supplying, Installation, Testing and Commissioning of Work Table With Sink, Undershelf & Both Side Splash Back. Dimension : 1500W X 700D X 850+100H mm. Sink size is 450X450X250mm. It include Top in 16swg thick ss sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top sound dampened by an approved method, top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19 mm radius at base, Shelf in 18swg thick ss sheet, 16swg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Sink 16 swg SS sheet with Complete overflow system, deep drawn sinks will be preferred, All corners coved at 30mm or large radius, Sink joint with top to be seamless and with rounded edges, 38mm dia CP drain waste, Long length lever handle drain waste valve. Drain Waste Valve is 1 and lever operated. Twin hole with Swivel type. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. CP drain waste - T&S make - (B-3940-1) model with Long lever handle and complete overflow connection system, Side splash position to be verified from the equipment layout and BOQ, Faucet type - T&S make - 5F-8DLX10. Utilities are Plumbing and Drainage. This item is Custom type. |
| 119 | Supplying, Installation, Testing and Commissioning of Table Top With Sink, GN1/1 Compatible Drawer & Undershelf. Dimension : 1050W X 900D X 900+50H mm. Sink size is 450X450X250H mm. It include Top in 16swg thick ss sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top sound dampened by an approved method, top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, Rear splash raised 50mm above the working height of 900mm and bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelf in 18swg thick ss sheet, 16swg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Sink should follow Sink in 16swg ss sheet with complete overflow system, deep drawn sink will be preferred, All corners coved at 30mm or large radius, Sink joint with top to be seamless and with rounded edges, 38mm dia CP drain waste. Long length lever handle for drain waste valve. Front double walled in 18 swg thick SS sheet with built in handle, Arrangement for cylinder lock, heavy duty telescopic channel with removable drawer, Sliding channels concealed in 0.9mm thick SS sheet outer paneling, Compatible Drawer to be designed for GN 1/1 pan, 150mm height. Drain Waste Valve should be Lever Operated. Mixer Faucets is Twin hole/swivel type. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. CP drain waste - T&S make - (B-3940-1) model with Long lever handle and complete overflow connection system, side splash back to be verified from equipment layout & boq, sink location to be verified from equipment layout & boq, Faucet type - T&S make - 5F-8DLX10. This item is Custom type. |
| 120 | Supplying, Installation, Testing and Commissioning of Work Table With Sink, Undershelves & LHS Splash Back. Dimension : 1000W X 700D X 850+100H mm. Sink size is 450X450X250H mm. It include Top in 16swg thick ss sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top sound dampened by an approved method, top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19 mm radius at base, Shelves in 18swg thick ss sheet, 16swg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Sink should include Sink 16 swg SS sheet with Complete overflow system, deep drawn sinks will be preferred, All corners coved at 30mm or large radius, Sink joint with top to be seamless and with rounded edges, 38mm dia CP drain waste, Long length lever handle drain waste valve. Drain waste valve is lever operated. Mixer Faucet is Twin Hole/Swivel type. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. CP drain waste - T&S make - (B-3940-1) model with Long lever handle and complete overflow connection system, Side splash position to be verified from the equipment layout and BOQ, Faucet type - T&S make - 5F-8DLX10. Utilities are Plumbing and Drainage. This item is Custom type. |
| 121 | Supplying, Installation, Testing and Commissioning of Work Table With Sink, Undershelves, GN1/1 Compatible Drawer & RHS Splash Back. Dimension : 1500W X 700D X 850+100H mm. Sink size is 450X450X250H mm. It include Top in 16swg thick ss sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top sound dampened by an approved method, top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, Rear splash raised 50mm above the working height of 900mm and bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelves in 18swg thick ss sheet, 16swg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of Undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Sink include Sink in 16swg ss sheet with complete overflow system, deep drawn sink will be preferred, All corners coved at 30mm or large radius, Sink joint with top to be seamless and with rounded edges, 38mm dia CP drain waste. Long length lever handle for drain waste valve. Drawer is make out with Front double walled in 18 swg thick SS sheet with built in handle, Arrangement for cylinder lock, heavy duty telescopic channel with removable drawer, Sliding channels concealed in 0.9mm thick SS sheet outer paneling, Compatible Drawer to be designed for GN 1/1 pan, 150mm height. Drain waste valve is lever operated. Mixer Faucets is Twin hole/Swivel type. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. CP drain waste - T&S make - (B-3940-1) model with Long lever handle and complete overflow connection system, side splash back to be verified from equipment layout & boq, sink location to be verified from equipment layout & boq, Faucet type - T&S make - 5F-8DLX10. This item is Custom type. |
| 122 | Supplying, Installation, Testing and Commissioning of Work Table With Sink, Undershelves, GN1/1 Compatible Drawer & LHS Splash Back. Dimension : 1800W X 700D X 850+100H mm. Sink size is 450X450X250H mm. It include Top in 16swg thick ss sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top sound dampened by an approved method, top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, Rear splash raised 50mm above the working height of 900mm and bent 25mm with 19mm radius at base, Rear side of splash to be closed, Shelves in 18swg thick ss sheet, 16swg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of Undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Sink include Sink in 16swg ss sheet with complete overflow system, deep drawn sink will be preferred, All corners coved at 30mm or large radius, Sink joint with top to be seamless and with rounded edges, 38mm dia CP drain waste. Long length lever handle for drain waste valve. Drawer include Front double walled in 18 swg thick SS sheet with built in handle, Arrangement for cylinder lock, heavy duty telescopic channel with removable drawer, Sliding channels concealed in 0.9mm thick SS sheet outer paneling, Compatible Drawer to be designed for GN 1/1 pan, 150mm height. Drain waste valve is lever operated. Mixer Faucets is twin hole/swivel type. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. CP drain waste - T&S make - (B-3940-1) model with Long lever handle and complete overflow connection system, side splash back to be verified from equipment layout & boq, sink location to be verified from equipment layout & boq, Faucet type - T&S make - 5F-8DLX10. This item is Custom type. |
| 123 | Supplying, Installation, Testing and Commissioning of Work Table With Sink, Undershelf & Both Side Splash Back. Dimension : 1350W X 700D X 850+100H mm. Sink size is 450X450X250. It include Top in 16swg thick ss sheet bent 50mm and 12mm on all sides excepting sides with splash back, Top sound dampened by an approved method, top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, Rear splash raised 100mm above the working height of 850mm and bent 25mm with 19 mm radius at base, Shelf in 18swg thick ss sheet, 16swg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Sink include Sink 16 swg SS sheet with Complete overflow system, deep drawn sinks will be preferred, All corners coved at 30mm or large radius, Sink joint with top to be seamless and with rounded edges, 38mm dia CP drain waste, Long length lever handle drain waste valve. Drain Waste Valve is 1 and it is lever operated. Mixer Faucet is Twin hole/Swivel type. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. CP drain waste - T&S make - (B-3940-1) model with Long lever handle and complete overflow connection system, Side splash position to be verified from the equipment layout and BOQ, Faucet type - T&S make - 5F-8DLX10. Utilities are Plumbing and Drainage. This item is Custom type. |
| 124 | Providing, Supplying and Fixing of Counter With Storage Below. Dimension : 1770W X 300D X 850H mm. It include Top in 16swg thick ss sheet bent 50mm and 12mm on all excepting slides, Top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, Top sound dampened by an approved method, Sides & back in 20swg sheet, Shelves in 18swg thick ss sheet, 16wg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. SS clips to be provided for support with behind unit legs. This item is Custom type. |
| 125 | Providing, Supplying and Fixing of Counter With Storage Below. Dimension : 1500W X 300D X 850H mm. It include Top in 16swg thick ss sheet bent 50mm and 12mm on all excepting slides, Top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, Top sound dampened by an approved method, Sides & back in 20swg sheet, Shelves in 18swg thick ss sheet, 16wg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. SS clips to be provided for support with behind unit legs. This item is Custom type. |
| 126 | Providing, Supplying and Fixing of Counter With Storage Below. Dimension : 1280W X 300D X 850H mm. It include Top in 16swg thick ss sheet bent 50mm and 12mm on all excepting slides, Top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, Top sound dampened by an approved method, Sides & back in 20swg sheet, Shelves in 18swg thick ss sheet, 16wg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. SS clips to be provided for support with behind unit legs. This item is Custom type. |
| 127 | Providing, Supplying and Fixing of Pickup Counter With Storage Below. Dimension : 1800W X 700D X 850H mm. It include Top in 16swg thick ss sheet bent 50mm and 12mm on all excepting slides, Top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, Top sound dampened by an approved method, Sides & back in 20swg sheet, Shelves in 18swg thick ss sheet, 16wg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. SS clips to be provided for support with behind unit legs. This item is Custom type. |
| 128 | Providing, Supplying and Fixing of Counter With Storage Below. Dimension : 1800W X 300D X 850H mm. It include Top in 16swg thick ss sheet bent 50mm and 12mm on all excepting slides, Top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, Top sound dampened by an approved method, Sides & back in 20swg sheet, Shelves in 18swg thick ss sheet, 16wg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. SS clips to be provided for support with behind unit legs. This item is Custom type. |
| 129 | Providing, Supplying and Fixing of Counter With Storage Below. Dimension : 1000W X 700D X 850H mm. It include Top in 16swg thick ss sheet bent 50mm and 12mm on all excepting slides, Top reinforced by 12/25x100x25/12mm channels of 16swg ss sheet, Top sound dampened by an approved method, Sides & back in 20swg sheet, Shelves in 18swg thick ss sheet, 16wg thick ss hat type channel of size 12/25x100x25/12mm for reinforcement of middleshelf/undershelf, +/-20mm adjustable PVC bullet feet of 25mm solid rod, threaded for connection with ss welded bush, 150 mm ground clearance. Upright in 16SWG 38mm Dia Pipe. SS clips to be provided for support with behind unit legs. This item is Custom type. |
| 130 | Supplying, Installation, Testing and Commissioning of Linear Drain Though With SS Grating. Dimension : 900W X 300D X 70H mm. It include Channel shall be constructed in S.S 304 , 16 swg. to ensure a high level of corrosion resistance, Hairline Finishing, 4mm thick for the exterior outside ring, 3mm thick for the interior sections, heavy duty sustainable 4 mm, Minimum point load shall be 150 kg/ M², Channel to be supplied with the required falls built in to ensure optimum water or waste discharge, water outlet/drain pipe connection in 100mm diameter. The trough grid dimension not to exceed 50mm, The grate length not to exceed 600mm. Utilities is Drainage. This item is Custom type. |
| 131 | Supplying, Installation, Testing and Commissioning of Floor Drain Trough With Stainless Steel Grating. Dimension : 300W X 300D X 150H mm. It include Channel shall be constructed in S.S 304 , 16 swg. to ensure a high level of corrosion resistance, Hairline Finishing, 4mm thick for the exterior outside ring, 3mm thick for the interior sections, heavy duty sustainable 4 mm, Minimum point load shall be 150 kg/ M², Channel to be supplied with the required falls built in to ensure optimum water or waste discharge, water outlet/drain pipe connection in 100mm diameter. The trough grid dimension not to exceed 50mm. Utilities is Drainage. This item is Custom type. |
| 132 | Supplying, Installation, Testing and Commissioning of Linear Drain Trough With Stainless Steel Grating. Dimension : 1200W X 300D X 70H mm. It include Channel shall be constructed in S.S 304 , 16 swg. to ensure a high level of corrosion resistance, Hairline Finishing, 4mm thick for the exterior outside ring, 3mm thick for the interior sections, heavy duty sustainable 4 mm, Minimum point load shall be 150 kg/ M², Channel to be supplied with the required falls built in to ensure optimum water or waste discharge, water outlet/drain pipe connection in 100mm diameter. The trough grid dimension not to exceed 50mm, The grate length not to exceed 600mm. Utilities is Drainage. This item is Custom type. |
| 133 | Supplying, Installation, Testing and Commissioning of Linear Drain Trough With Stainless Steel Grating. Dimension : 600W X 600D X 70H mm. It include Channel shall be constructed in S.S 304 , 16 swg. to ensure a high level of corrosion resistance, Hairline Finishing, 4mm thick for the exterior outside ring, 3mm thick for the interior sections, heavy duty sustainable 4 mm, Minimum point load shall be 150 kg/ M², Channel to be supplied with the required falls built in to ensure optimum water or waste discharge, water outlet/drain pipe connection in 100mm diameter. The trough grid dimension not to exceed 50mm. Utilities is Drainage. This item is Custom type. |
| 134 | Supplying, Installation, Testing and Commissioning of Floor Drain Trough With Stainless Steel Grating. Dimension : 300W X 300D X 70H mm. It include Channel shall be constructed in S.S 304 , 16 swg. to ensure a high level of corrosion resistance, Hairline Finishing, 5mm thick for the exterior outside ring, 3mm thick for the interior sections, heavy duty sustainable 4 mm, Minimum point load shall be 150 kg/ M², Channel to be supplied with the required falls built in to ensure optimum water or waste discharge, water outlet/drain pipe connection in 100mm diameter. The trough grid dimension not to exceed 50mm. Utilities is Drainage. This item is Custom type. |
| 135 | Supplying, Installation, Testing and Commissioning of Linear Drain Trough With Stainless Steel Grating. Dimension : 1500W X 300D X 70H mm. It include Channel shall be constructed in S.S 304 , 16 swg. to ensure a high level of corrosion resistance, Hairline Finishing, 5mm thick for the exterior outside ring, 3mm thick for the interior sections, heavy duty sustainable 4 mm, Minimum point load shall be 150 kg/ M², Channel to be supplied with the required falls built in to ensure optimum water or waste discharge, water outlet/drain pipe connection in 100mm diameter. The trough grid dimension not to exceed 50mm, The grate length not to exceed 600mm. Utilities is Drainage. This item is Custom type. |
| 136 | Supplying, Installation, Testing and Commissioning of Linear Drain Trough With Stainless Steel Grating. Dimension : 750W X 600D X 70H mm. It include Channel shall be constructed in S.S 304 , 16 swg. to ensure a high level of corrosion resistance, Hairline Finishing, 5mm thick for the exterior outside ring, 3mm thick for the interior sections, heavy duty sustainable 4 mm, Minimum point load shall be 150 kg/ M², Channel to be supplied with the required falls built in to ensure optimum water or waste discharge, water outlet/drain pipe connection in 100mm diameter. Upright in 16SWG 38mm Dia Pipe. Splash Profile is 90°. The trough grid dimension not to exceed 50mm, The grate length not to exceed 600mm. Utilities is Drainage. This item is Custom type. |
| 137 | Supplying, Installation, Testing and Commissioning of Ceiling Hung Double Overhead Shelf. Dimension : 1500W X 300D X 425+325H mm. It include 2 Nos shelves in 18SWG ss sheet , 300mm deep, Bottom of Lower shelf at 1250mm height and upper shelf at 1600 mm height from finished floor, Bottom side of shelf to be closed, 25mm OD 16Swg SS pipe uprights welded to the top side of shelves. Warmer to be installed on lower shelf. This item is Custom type. |
| 138 | Supplying, Installation, Testing and Commissioning of Ceiling Hung Double Overhead Shelf. Dimension : 1500W X 300D X 1250+300H mm. It include 2 Nos shelves in 18SWG ss sheet , 300mm deep, Bottom of Lower shelf at 1250mm height and upper shelf at 1600 mm height from finished floor, Bottom side of shelf to be closed, 25mm OD 16Swg SS pipe uprights welded to the top side of shelves. Warmer to be installed on lower shelf, SS Clamp to be provided. This item is Custom type. |
| 139 | Supplying, Installation, Testing and Commissioning of Ceiling Hung Double Overhead Shelf. Dimension : 900W X 300D X 1250+300H mm. It include 2 Nos shelves in 18SWG ss sheet , 300mm deep, Bottom of Lower shelf at 1250mm height and upper shelf at 1600 mm height from finished floor, Bottom side of shelf to be closed, 25mm OD 16Swg SS pipe uprights welded to the top side of shelves. SS Clamp to be provided. This item is Custom type. |
| 140 | Supplying, Installation, Testing and Commissioning of Ceiling Hung Double Overhead Shelf. Dimension : 1950W X 300D X 425+325H mm. It include 2 Nos shelves in 18SWG ss sheet , 300mm deep, Bottom of Lower shelf at 1250mm height and upper shelf at 1600 mm height from finished floor, Bottom of splash to be closed, 25mm OD 16Swg SS pipe uprights welded to the top side of shelves. This item is Custom type. |
| 141 | Supplying, Installation, Testing and Commissioning of Knee Operated Hand Wash Sink Paper Towel Dispenser & Soap Dispenser. Dimension : 310W X 400D X 560H mm. It is Wall Mounted. It include Knee operated wall mounted integral hand wash basin, Wholly made of stainless steel AISI 304, Knee operated, wall mounted. All fittings included, Double inlet by one push button and non-return mixing valve and single outlet, Conceived to meet all the HACCP legal requirements, Back splash, soap dispenser, towels dispenser and wastepaper bin included. KEC give his own fabrication detail, Sanitizer dispenser required. Utilities are Plumbing and Drainage. This item is Custom type. |
| 142 | Providing, Supplying and Fixing of 2 Tier Wall Shelf. Dimension : 1800X375 mm. It include Shelf in 18swg s.s 304 sheet, 3 sides bent down 38mm & 12mm, rear & sides bent up 38mm & hemmed 12mm, Underside of shelf to be closed with 22swg ss sheet, 300 mm high lower shelf & top shelf fixed at 375 mm height, Brackets 225mm high in 16swg sheet at a c/c gap not exceeding 750mm, 25mm gap to be provided wall and shelf rear, Brackets to be bolted to s.s studs on the underside of shelf by dome shaped nuts. This item is Custom type. |
| 143 | Providing, Supplying and Fixing of 2 Tier Wall Shelf. Dimension : 1800W X 375D X 600H mm. It include Shelf in 18swg s.s 304 sheet, 3 sides bent down 38mm & 12mm, rear & sides bent up 38mm & hemmed 12mm, 300 mm high lower shelf & top shelf fixed at 375 mm height, Brackets 225mm high in 16swg sheet at a c/c gap not exceeding 1000mm, 25mm gap to be provided wall and shelf rear, Brackets to be bolted to s.s studs on the underside of shelf by dome shaped nuts. This item is Custom type. |
| 144 | Supplying, Installation, Testing and Commissioning of Kitchen Blender. Dimension : 260W X 260D X 647H mm. Make out of WARING or HAMILTON BEACH,SANTOS. Model no. is CB15P. It is Durable, high-performance stainless steel blade, The stackable, 1 gallon, BPA-free copolyester container makes storage easy, Easy-off, rubberized lid with removable clear cap for adding ingredients and for pressure reduction during hot food blending, Metal-on-metal, stainless steel coupling system for durability and reliability, Durable, full die-cast motor housing with rugged rubber feet to reduce vibration, Easy-to-clean and easy-to-use electronic membrane keypad. Capacity is about 100+drinks or servings per day. Connected Load is 1.8Kw, 1 Phase. Utilities is Electrical. This item is Imported type. |
| 145 | KITCHEN SUPPRESSION SYSTEM: Providing Supply & Installation of WCK-26 Cylinder with MRM Master & Bracket. To be fixed on both sidesof the hood. As per Directed By Engineer In Charge. |
| 146 | Providing Supply & Installation of Nozzle Cap - Standard. As per Directed By Engineer In Charge. |
| 147 | Providing Supply & Installation ofDetector Bracket (Including Two \"s\" Hooks & Two Cable Connectors). As per Directed By Engineer In Charge. |
| 148 | Providing Supply & Installation ofSS Flow Nozzles for ducts, Burners, Plenums.As per Directed By Engineer In Charge. |
| 149 | Providing Supply & Installation of Fusible Link,182 or 232 Deg. As per Directed By Engineer In Charge. |
| 150 | Providing Supply & Installation ofMiscellaneous fittings, Elbows, Tees, Etc.As per Directed By Engineer In Charge. |
| 151 | Providing Supply & Installation ofEMT Corner Pulley.As per Directed By Engineer In Charge. |
| 152 | Providing Supply & Installation of Manual Pull Station (Standard).As per Directed By Engineer In Charge. |
| 153 | Providing Supply & Installation ofSS Wire Rope .As per Directed By Engineer In Charge. |
| 154 | Providing Supply & Installation ofSS-316 Piping and Fittings. |
| 155 | Providing Supply & Installation of Gas Shutt off Valve of 1\" As per Directed By Engineer In Charge. |
| 156 | Providing Supply & Installation ofSMPS with Hooter As per Directed By Engineer In Charge. |
| 157 | Annual Maintenance Contract for Hydro Pneumatic System Multi grade sand Filte, Water softener (Normal AMC ) for perion of 3 Yerars |
| 158 | PLUMBING & SANITARY WORK : Providing and fixing CP Brass Bottle Trap with wall connecting pipe, waste coupling and wall flange etc. of approved quality & make and as per the direction of Engineer-in-charge. |
| 159 | Providing and fixing Stainless Steel A ISI 304 sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x460mm bowl depth 200 mm (Kitchen sink without drain board) |
| 160 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040mm bowl depth 200 mm (Kitchen sink with drain board) |
| 161 | Providing and Fixing of Stailess Sink mixer with aerator including cutting and making good the walls wherever required complete in all respects as per direction of the Engineer-in-charge. |
| 162 | Providing and Fixing C.P. brass towel ring \"Round\" fixedtoPVC cleats with C.P.brass screws includingcutting and making good the walls wherever required. |
| 163 | Providing and Fixing 15mm C.P. brass angle valve with wall flange and C.P copper connecting pipe 450 mm long nut and rubber, washer with C.P. brass flange complete, including cutting and making good the walls, wherever required. |
| 164 | Providing and Fixing 15mm C.P brass Long body bib cock with aerator complete, including cutting and making good the walls wherever required. |
| 165 | Providing and fixing wall mounted Automatic soap dispenser SS-304/Brass with Chrome plating with automatic infrared sensor with minimum storage 1000 ml with AC Power supply of 220V, 50 Hz complete in all respect as per direction of the engineer-in-charge. |
| 166 | Providing and Fixing in position storage type Hot Water electrical horizontal/ vertical heaters with copper container, insulation, and stove enameled M.S. jacket, thermostatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet with non return valve and 15/20mm dia outlet including making connections complete in all respects. (wall mounted with suitable M.S. bolts and nuts) 15 Ltrs |
| 167 | Providing and Fixing in position storage type Hot Water electrical horizontal/ vertical heaters with copper container, insulation, and stove enameled M.S. jacket, thermostatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet with non return valve and 15/20mm dia outlet including making connections complete in all respects. (wall mounted with suitable M.S. bolts and nuts) 50 Ltrs |
| 168 | Supplying, Installation, Testing and Commissioning of Drinking Water station with wall mounted RO unit (50 LPH) capacity with water cooler of 60 ltr/hr. cooling capacity and 80 ltr storage capacity & SS storage tank made of pure Stainlesssteel body, without rusting , without corrosion. including externallly mounted thermostat to make it easy to set water temperature, wth extra large SS wate tray prevent spalashing and ensures fast drainage of water , auto cut facilitie , over load compressor protection, electrical supply internal wiring etc. to complete the work. Complete RO units shall have 7 degree of treatment i.e. sedimentation, carbon block purification, anti scalent purification, RO membrane, Post Carbon block, nano silver leaching etc. |
| 169 | Soil Waste & Rain Water vPipes: Providing and fixing UPVC silent waste pipes of Type B conforming to IS: 13592 including all fittings with or without access door or without access i.e bends, junctions, cowls,offsets, and all structural suppprts as required etc. and jointing with solvent cement, including cutting holes inwalls and floors wherever required and making good the same, complete as directed by the Engineer-in-Charge. 110 mm dia |
| 170 | Providing and fixing UPVC silent waste pipes of Type B conforming to IS: 13592 including all fittings with or without access door or without access i.e bends, junctions, cowls,offsets, and all structural suppprts as required etc. and jointing with solvent cement, including cutting holes inwalls and floors wherever required and making good the same, complete as directed by the Engineer-in-Charge. 160 mm dia |
| 171 | Providing and fixing PVC Waste pipes including all fittings and jointing with solvent cement as per Manufacturer\"s specifications complete including cutting holes or chases in floor/wall and making good the same wherever required as per direction of Engineer-in-charge. 50mm outer dia. |
| 172 | Providing and fixing PVC Waste pipes including all fittings and jointing with solvent cement as per Manufacturer\"s specifications complete including cutting holes or chases in floor/wall and making good the same wherever required as per direction of Engineer-in-charge. 63mm outer dia. |
| 173 | Providing and fixing PVC trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 110 mm inlet and 110 mm outlet |
| 174 | Providing and Fixing Floor drain by fixing PVC Reducing elbow of 110 x 63 mm OD in cement concrete 1:2:4 at all levels (exlcuding cost of grating) for connection to floor traps in sunken portions, complete as per required slope as per drawings and as per approval of the engineer-in-charge. |
| 175 | Providing and fixing PVC Inlet fitting with maximum 3 inlets 40, 50 & 63 mm size fabricated from 110 mm dia uPVC pipes and solvent joint with pvc sockets as per site locations, fixed to C.I. Trap and set in cement concrete as per drawing complete as per approval of the engineer-in-charge. |
| 176 | Providingand fixing castbrasscleanoutplug/ floor cleanout with suitableinsert keysfor opening,malethreaded joint withG.I. socketcaulked to spun soil pipe including cost of joint etc.completeas directed by Engineer-in-charge.. 100 mm Dia |
| 177 | Providingand fixing castbrasscleanoutplug/ floor cleanout with suitableinsert keysfor opening,malethreaded joint withG.I. socketcaulked to spun soil pipe including cost of joint etc.completeas directed by Engineer-in-charge.. 150 mm Dia |
| 178 | Providing and Fixing SS Grating with frame and SS Screws casted heavy duty 150 MM X150 MM including cutting and making good the walls and floors wherever required complete in all respects . |
| 179 | Providing & laying cement concrete 1:2:4 mix (1 cement : 2 coarse sand:4 stone aggregate 20mm and down gauge) 75 mm in bed and pipe. For 150, 100mm, 75mm and 50mm dia pipes under floor including centering & shuttering whereverrequired. |
| 180 | WATER SUPPLY SYSTEM : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes |
| 181 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes |
| 182 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes |
| 183 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal outer dia pipes |
| 184 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 40 mm nominal outer dia pipes |
| 185 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 50 mm nominal outer dia pipes |
| 186 | Internal work Exposed on wall Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 40 mm dia Nominal Bore |
| 187 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 50 mm dia Nominal Bore |
| 188 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 65 mm dia Nominal Bore |
| 189 | Providing and fixing thermal insulation over hot water pipes in chase having Japanese Red Oxide Primer Coat with 6mm thick \"Kaiflex\" or approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubberhaving density of 60-90 Kg/m3 over pipes of following sizesincluding all required accessories complete as per Manufactuer\"s specifications and finishing it as per site requirement with Cement Plaster. For 15mm Diaor Equivalent |
| 190 | Providing and fixing thermal insulation over hot water pipes in chase having Japanese Red Oxide Primer Coat with 6mm thick \"Kaiflex\" or approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubberhaving density of 60-90 Kg/m3 over pipes of following sizesincluding all required accessories complete as per Manufactuer\"s specifications and finishing it as per site requirement with Cement Plaster. For 20mm Diaor Equivalent |
| 191 | Providing and fixing thermal insulation over hot water pipes in chase having Japanese Red Oxide Primer Coat with 6mm thick \"Kaiflex\" or approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubberhaving density of 60-90 Kg/m3 over pipes of following sizesincluding all required accessories complete as per Manufactuer\"s specifications and finishing it as per site requirement with Cement Plaster. For 25mm Diaor Equivalent |
| 192 | Providing and fixing thermal insulation over hot water pipes in chase having Japanese Red Oxide Primer Coat with 6mm thick \"Kaiflex\" or approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubberhaving density of 60-90 Kg/m3 over pipes of following sizesincluding all required accessories complete as per Manufactuer\"s specifications and finishing it as per site requirement with Cement Plaster. For 32mm Diaor Equivalent |
| 193 | Providing and fixing forged brass lever operated flow control ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. 15 mm nominal bore |
| 194 | Providing and fixing forged brass lever operated flow control ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. 20 mm nominal bore |
| 195 | Providing and fixing forged brass lever operated flow control ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. 25 mm nominal bore |
| 196 | Providing and fixing forged brass lever operated flow control ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. 32 mm nominal bore. |
| 197 | Providing and fixing forged brass lever operated flow control ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. 40 mm nominal bore |
| 198 | Providing and fixing forged brass lever operated flow control ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. 50 mm nominal bore |
| 199 | Providing & fixing M.S. structural work fabricated from standard section e.g. M.S Flat Strips, Round Bars, angles, channels, plates etc.. including cutting to size, drilling, welding, fixing either by welding to insert plates in RCC structural members including cutting and making good the walls, ceilings and floors or by dash fasteners. (As per the Instructions of the Engineer-in-Charge) |
| 200 | FOR FIRE FIGHTING WORKS : Supply, installation, testing and commissioning ISI marked (IS:16018) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:16018 and walll suspension braket as required as per specifications. |
| 201 | Supply, installation, testing and commissioning of 6 kg ABC (Powder Type) Fire Extinguisher. Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683 as required as per specifications. |
| 202 | Providing and Fixing ISI marked portable type fire extinguishers of 6 Kg capacity K type as per IS- 15683complete as per specification and fixed / install as per site condition : |
| 203 | Providing and Fixing ISI marked portable type fire extinguishers of 2 Kg capacity K type as per IS- 15683complete as per specification and fixed / install as per site condition : |
| 204 | Drainage Sump Pump for Plant Room : Supply,installation, testing and commissioning compact monoblock dry motor sump pumps of suitable rating, with non-clog free flow open impeller, solid handling capacity at least 28 mm suitable for operation on 415 volts +10% , 3 Phase, 50Hz,A.C supply, speed 2900 RPM including oil chamber, guide wire for lifting & lowering of pump, G.I. galvanized lifting chain,complete. (i) Electrical switch panel with DOL starter having all necessary accessories &safetydevices of standard specifications. Automatic built-up water level controller with necessary length of cable upto control panel.(ii) All pipe, fittings and valves for sump pump and pipes riser from pump to outside nearest manhole (upto 15 m length), cables etc. (iii) No. ofPumps/set :2 Nos. (1W + 1 S)(iv) Discharge - 50 LPM Each Head- 12-15 Meters |
| 205 | Grease Separator Supply, Installation, Testing and Commissioning of Grease separator Easy Clean ground with single moulded desing and two access manhole cover NS 10, Standard, 740-1175 mm, class B for underground installation according to EN1825 Installation in frost-free depth • A load distribution plate must be provided for class B Class A/B = 700 mm = DEC = 1800 mm • Minimum installation depth achieved by sawing the upper section as required Consisting of: Upper section made of polymer, height and level adjustment, with cover class B in accordance with EN 124, made of cast iron (can be driven over by cars and trucks), sealed odour-tight, incl. lift-out key Sludge trap capacity: 1000 liter Total separator cpacity: 1600 liter Weight: 360 kg Tanks / cisterns may be installed in groundwater up to the top of the tank body Certification Z-54.1-440Warranty: 20 Years on polyethylene body.Manufacturer: KESSEL Article number: 93010/120B |
| 206 | ELECTRICAL : Point wiring & Sub main: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C (Primary point ) |
| 207 | Wiring forgroup controlled (looping) light point /fan point / exhaust fan point/call bell point (without independent switch etc) with 1.5 sqmm FRLS PVC insulated copper conductor cable in surface/recessed Steel conduit and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc. as required. Group C (Loop point ) |
| 208 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed medium steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.(For Light Plug Wiring + kitchen power) |
| 209 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed medium steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire .(For General + kitchen Power Circuit Point) |
| 210 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed medium steel conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 211 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed medium steel conduit as required. 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 212 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed medium steel conduit as required. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 213 | 4 X 10 sq. mm + 2 X 10 sq. mm earth wire insteel conduit . |
| 214 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required |
| 215 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 216 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 217 | Installation of Exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep |
| 218 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 219 | Supplying and fixing of following sizes of MEDIUM CLASS PVCconduit along with accessories in surface/recess,or cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 220 | Supplying and fixing of following sizes of MEDIUM CLASS PVCconduit along with accessories in surface/recess,or cutting the wall and making good the same in case of recessed conduit as required.32 mm |
| 221 | Supplying and fixing of following sizes of steelconduit along with accessories in surface/recess,or cutting the wall and making good the same in case of recessed conduit as required. 25 mm |
| 222 | Supplying and fixing of following sizes of steelconduit along with accessories in surface/recess,or cutting the wall and making good the same in case of recessed conduit as required. 32 mm |
| 223 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required Telephone socket outlet |
| 224 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable |
| 225 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair |
| 226 | Providing and fixing in position suitable 1.6mm thick G.I outlet box with 1no. RJ-45 for Data/telephone outlet including crimpling on both side with all fixing accessories as required. |
| 227 | Supply, installation ,testing & commisioning of 1x 24 Port switch jack panel for termination of data voice cable & to be mounted in mounting rack 12 U switch with complete accessories as required. |
| 228 | Supply and fixing of the following sizes moulded plug , Indoor and Outdoor Plug & socket outlets and Enclosures for 1 phase & 3 phase Raw with G.I/PVC Box of suitable size flush/surface and with 2 nos gland for cable entry making connections complete as required. (Make :-Hensel/ legrand/M.K ) (The depth of the box to be such that the socket is flush with the wall surface).6/16A 3pin switch socket combined 1phase ,250v, 3 module with GI box & adopter with PVC membranceprotective Acrylic sheet cover.(IP-55 rating protection) |
| 229 | Supply and fixing of the following sizes moulded plug , Indoor and Outdoor Plug & socket outlets and Enclosures for 1 phase & 3 phase Raw with G.I/PVC Box of suitable size flush/surface and with 2 nos gland for cable entry making connections complete as required. (Make :-Hensel/ legrand/M.K ) (The depth of the box to be such that the socket is flush with the wall surface).16A 3pin switch socket outlet 1phase,250v ,1-2 module socket outlet with GI box & adopter with PVC membranceprotective Acrylic sheet cover. (IP-55 rating protection) |
| 230 | Supply and fixing of the following sizes moulded plug , Indoor and Outdoor Plug & socket outlets and Enclosures for 1 phase & 3 phase Raw with G.I/PVC Box of suitable size flush/surface and with 2 nos gland for cable entry making connections complete as required. (Make :-Hensel/ legrand/M.K ) (The depth of the box to be such that the socket is flush with the wall surface).6 pin 16 A plug and socket with 16 amps 2 pole MCB.IP 55-65 |
| 231 | Supply and fixing of the following sizes moulded plug , Indoor and Outdoor Plug & socket outlets and Enclosures for 1 phase & 3 phase Raw with G.I/PVC Box of suitable size flush/surface and with 2 nos gland for cable entry making connections complete as required. (Make :-Hensel/ legrand/M.K ) (The depth of the box to be such that the socket is flush with the wall surface).3 pin 25 A power plug and single phase (ball) with MCB.IP 55-65 |
| 232 | Supply and fixing of the following sizes moulded plug , Indoor and Outdoor Plug & socket outlets and Enclosures for 1 phase & 3 phase Raw with G.I/PVC Box of suitable size flush/surface and with 2 nos gland for cable entry making connections complete as required. (Make :-Hensel/ legrand/M.K ) (The depth of the box to be such that the socket is flush with the wall surface). 5 pin16A 3 phaseindustrial plug and socket with16amps TPN MCB.IP65 |
| 233 | Supply and fixing of the following sizes moulded plug , Indoor and Outdoor Plug & socket outlets and Enclosures for 1 phase & 3 phase Raw with G.I/PVC Box of suitable size flush/surface and with 2 nos gland for cable entry making connections complete as required. (Make :-Hensel/ legrand/M.K ) (The depth of the box to be such that the socket is flush with the wall surface). 5 pin25A 3 phaseindustrial plug and socket with 25amps TPN MCB. IP65 |
| 234 | Supply and fixing of the following sizesmoulded plug , Indoor and Outdoor Plug & socket outlets and Enclosures for 1 phase & 3 phase Raw with G.I/PVC Box of suitable size flush/surface and with 2 nos gland for cable entry making connections complete as required. (Make :-Hensel/ legrand/M.K ) (The depth of the box to be such that the socket is flush with the wall surface).5 pin32A/40A 3 phaseindustrial plug and socket with 40amps TPN MCB.IP65 |
| 235 | Supply and fixing of the following sizes moulded plug , Indoor and Outdoor Plug & socket outlets and Enclosures for 1 phase & 3 phase Raw with G.I/PVC Box of suitable size flush/surface and with 2 nos gland for cable entry making connections complete as required. (Make :-Hensel/ legrand/M.K ) (The depth of the box to be such that the socket is flush with the wall surface).5 pin 63 A3 phase industrial plug and socket with 63amps 4 pole MCB. IP 65 rating |
| 236 | Distribution Board &: Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator). 6 way (4 + 18), Double door |
| 237 | Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator). 8 way (4 + 24), Double door |
| 238 | Supplying and fixing following way Surface recess mounting ,vertical type 415V,TP&N MCB distribution board of steel sheet for 415 voltsduly protected ,duly powder painted ,inclusive of 200A tin copper bus bar neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required.(But without MCB& incomer) as required . 4 way (4 + 12), Double door |
| 239 | Supplying and fixing following way Surface recess mounting ,vertical type 415V,TP&N MCB distribution board of steel sheet for 415 voltsduly protected ,duly powder painted ,inclusive of 200A tin copper bus bar neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required.(But without MCB& incomer) as required .12 way (4 + 36), Double door |
| 240 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way Double door |
| 241 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 242 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 243 | Supplying and fixing following rating, four pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps |
| 244 | Supplying and fixing following rating, four pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps |
| 245 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25/32 amps |
| 246 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25/32 amps |
| 247 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps |
| 248 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps |
| 249 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections,testing and commissioning etc. as required. |
| 250 | Supply, installation, testing and commissioning of weather proofsheet metal enclosed 63A TPNMCB (10 KA) for dry scrubber.(This shall include cable entry boxes both for incoming and outgoing cable) |
| 251 | Supply, installation, testing and commissioning of weather proofsheet metal enclosed 40A TPNMCB (10 KA) for Airwasher.(This shall include cable entry boxes both for incoming and outgoing cable) |
| 252 | Lighting Fixtures & Fan: Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connectionsetc. as required. |
| 253 | Supplying of All Lights fixtures shall be complete with LED lamps with all required accessories. Samples of all the fixtures with all available colour shall be submitted to the architect/ client/ Project Manager before supply & approval is taken. Please check the fixtures final quantity from the Architect / Project Manager before ordering and be sure of actual requirement prior to ordering. 18wLED Recess down light ,Philips Astra Max Plus 18W Round Led Downlight Neutral White or equivalent |
| 254 | Supplying of All Lights fixtures shall be complete with LED lamps with all required accessories. Samples of all the fixtures with all available colour shall be submitted to the architect/ client/ Project Manager before supply & approval is taken. Please check the fixtures final quantity from the Architect / Project Manager before ordering and be sure of actual requirement prior to ordering. 40w LED PANEL LIGHT FOS Metal Led Commercial Ceiling Panel Light 2X2 40-Watt, 4400 Lumens - Slim, Square, Cool White 6500K or equivalent . |
| 255 | Supplying of All Lights fixtures shall be complete with LED lamps with all required accessories. Samples of all the fixtures with all available colour shall be submitted to the architect/ client/ Project Manager before supply & approval is taken. Please check the fixtures final quantity from the Architect / Project Manager before ordering and be sure of actual requirement prior to ordering.4Feet LED BATTEN LIGHTphilips model:- BN170C LED40S-6500 PSU L120 or equivalent |
| 256 | Supplying of All Lights fixtures shall be complete with LED lamps with all required accessories. Samples of all the fixtures with all available colour shall be submitted to the architect/ client/ Project Manager before supply & approval is taken. Please check the fixtures final quantity from the Architect / Project Manager before ordering and be sure of actual requirement prior to ordering. S.I.T& C of 3w led exit signage with 3 hours battery backup complete as required.(Make Prolite) |
| 257 | Supplying of All Lights fixtures shall be complete with LED lamps with all required accessories. Samples of all the fixtures with all available colour shall be submitted to the architect/ client/ Project Manager before supply & approval is taken. Please check the fixtures final quantity from the Architect / Project Manager before ordering and be sure of actual requirement prior to ordering. SITC OF wall bracket fanmake Havells 400mm Swing| 4 Star, High-Performance, Wall Fan for Kitchen |
| 258 | CABLE TRAY : Supplying and installing following size of perforated Hot DippedGalvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness |
| 259 | Supplying and installing following size of perforated Hot DippedGalvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness |
| 260 | Cable Main & Sub Main: MV Cable & End TerminationSupplying & laying of following 1100 voltgrade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 3.5 C x 95 sq.mm |
| 261 | Supplying & laying of following 1100 voltgrade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 3.5 C x 70 sqmm |
| 262 | Supplying & laying of following 1100 voltgrade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 4 C x 25 sq.mm |
| 263 | Supplying & laying of following 1100 voltgrade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning.4 C x 16sq.mm |
| 264 | Supplying & laying of following 1100 voltgrade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning.4 C x 10sq.mm |
| 265 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Aluminium 3.5 C x 95 sq.mm |
| 266 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Aluminium4 C x 25 sq. mm |
| 267 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Aluminium4 C x 16sq. mm |
| 268 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Aluminium4 C x 10sq. mm |
| 269 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 270 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 271 | Electric Panel(CPRI APPROVED) : Design, manufacture, supplying at site,installing, testing and commissioning of the following cubical type, dead front, 2mm thick sheet steel enclosed, free standing indoor type extendible Sub Distribution Panel with vermin proof hinged lockable doors for each compartment provide bus bar interconnections for incoming and outgoing including feeders earthing and painting and as per specifications.General Note For MCB \"s:MCCB\"s shall be of 3P with solid neutral link or 4P as called for in the BOQ.Ics = Icu = 100% for the breakers. MCCB\"s upto 250A shall be with thermal - magnetic releases and beyond 250A shall be with micro-processor based releases. (I) MCCB\"s shall have adjustable over current with time setting and adjustable short circuit with time setting releases and breaking capacity for 1 Sec. ii MCCB\"s shall be with extended rotary handle and Phase separators both sides(III) MCCB\"s shall have auxiliary contacts wherever BMS compatibility is needed. (IV) For UPS output panels, MCCB\"s shall be of 3Pole with 2N, neutral links (twice rated neutral link). (V) MCCB of required rating (Amps) as called for in the BOQ and of required breaking capacity for 1 Sec. General Note: MCB\"s shall be of minimum 10kA breaking capacity for 1 sec. Use \"B\" curve MCB\"s for lighting & small power circuits, \"C\" curve for motor duty i.e. for pumps, AC motors, AHU motors, window and split AC\"s etc. & \"D\" curve for UPS DB\"s i.e. for computers/ PC\"s circuit. Main incomer & outgoing circuit MCB\"s shall be selected accordingly i.e. type B,C & D.as per the nature of the circuit/ load.Exact MCB rating & category is to be calculated by the electrical contractor based on the final load of the circuit, its nature and fault current.General Note For Transient Voltage Surge Suppressor(TVSS): Transient Voltage Surge Suppressors (TVSS) shall be mounted out side the panel / switch board in a sheet steel enclosure.It shall be suitable for handling required (specified) surge handling capacity, shall be 10 modes protection with noise filters. (EMI & RFI) and with inbuilt back up fuse protection.Surge suppressor shall be complete with isolating / protective device in the form of MCB / MCCB of KA rating (breaking capacity) as of switch board. (TVSS): Transient Voltage Surge Suppressors (TVSS) shall be mounted out side the panel / switch board in a sheet steel enclosure. It shall be suitable for handling required (specified) surge handling capacity, shall be 10 modes protection with noise filters. (EMI & RFI) and with inbuilt back up fuse protection.Surge suppressor shall be complete with isolating / protective device in the form of MCB / MCCB of KA rating (breaking capacity) as of switch board. Provide 2 kg fire extinguisher supression arrangementin the panel. Cylinder mounted on top/sideof the panelThe Kitchen Panel shall consists of : - INCOMER 160A TPN MCCB (35kA) with thermal magnetic release with o/c, s/c protection release all indication with front operating handle & door interlockterminal suitable forAL Arm XLPE cable connection on one side and Busbar connection on the other side.terminal suitable for 3.5 x70sqmm AL Arm XLPE cable connection on one side and Busbar connection on the other side.Busbar 300 amps 4p pole busbar chamber of suitable length with Aluminium busbars. All busbars and interconnections shall be of suitable size aluminium strips current density of Aluminiumshall not be more than 0.8 Amps/sq.mm provide 50% capacity for neutral bus bar. Indicating Panel : 3nos phase indicating lamps each backed up with MCB and switch shall be provided forincomers.Provide L&T make Intelligent Panel Meter -(96 mm x 96 mm) covering 25 electrical parameters with RS 485 port for incommers.Provide ELR (Earth leakage relay) with CBCT\"s.Shunt trip coil 220V A.C. Outgoing:2 Nos. 40/63A DP MCB (10 kA) terminals suitable to receive XLPE armourd copper conductor cable on one side and wire connection to Bus bars. (UPS DB+SPARE) 03 Nos. 3.2 A TPN MCB (10 kA)terminals suitable to receive Cable connection on one side and wire connection to Bus bars.I) 01 No. 40A TPN MCB (10 kA)terminals suitable to receive Cable connection on one side and wire connection to Bus bars.(AIRWASHER ) ii) 03 Nos. 63A TPN MCB (10 kA)terminals suitable to receive Cable connection on one side and wire connection to Bus bars. (LP DB+Dry scrubber+spare) iii) 1No. 32A DP MCB (10 kA)terminals suitable to receive Cable connection on one side and wire connection to Bus bars. iv) 1Nos. 40A 4p RCBO(30ma) terminals suitable to receive Cable connection on one side and wire connection to Bus bars. The KITCHEN Panel shall consists of :- (enclousure frame not required,part of electrical panel due to less space at site) Incomer: Main Incomer 125 Amps TPN MCCB (25KA) terminals suitable to 3.5 x 50 sqmm AL. Arm XLPE cable connection on one side and Busbar connection on the other side. OUTGOINGS i) 06Nos. 25/32/40A 4p RCBO(30ma) terminals suitable to receive Cable connection on one side and wire connection to Bus bars. II) 10Nos. 16A/20A/25A/32A SP MCB (10KA) backed up with 63 A DP RCCB current sensitivity (100MA) with terminals suitable to receive on one side and wire connection to Bus bars. iii) 10Nos. 16A/20A/25A/32A SP MCB (10KA) backed up with 63 A DP RCCB current sensitivity (100MA) with terminals suitable to receive on one side and wire connection to Bus bars. 10Nos. iv) 6A/20A/25A/32A SP MCB (10KA) backed up with 63 A DP RCCB current sensitivity (100MA) with terminals suitable to receive on one side and wire connection to Bus bars. The ELEC CUM Kitchen Panel as described above and specifications complete. |
| 272 | UPS/Invertor Equipment : Design, manufacture and supply, Installation connecting wire including all acessories full load testing & commissioning of following UPS’s (Input-1phase and Output-1phase) unit as per specifications.3KVA UPS for 1HOURBattery backup (Make:- APC, Emerson) |
| 273 | CCTV :Supply ,Installation,Testing & CommissioningIP BASED Colour Camera with fixed lens 3.6 mm, 2 inch HAD 530 HTV resolution 0.5 lux, 3.4\" DomeType.(MAKE :-HONEYWELL) |
| 274 | IP Night vision Colour Camera with fixed lens 3.6 mm, 2 inch HAD 530 HTV resolution 0.0 lux, 3.4\" Bullet Cylindrical Type. IP 55 (Outdoor type) (MAKE :-HONEYWELL) |
| 275 | 8 Channel NVR Surveillance System with 16POE ports , with hdmi,vga port &mobile phone monitoring, record rate 100 FPS – record and viewing, 25 FPS per Camera, with built in Multiplexer ,with TCP – IP connectivity, recording on real time , high quality 2TB HDD suitable for 90 daysrecording,Resolution – 640 x 480 pixels, suitable for connecting the CCTV’s. (MAKE :-HONEYWELL) |
| 276 | 16 Channel NVR Surveillance System with 16POE ports , with hdmi,vga port &mobile phone monitoring, record rate 100 FPS – record and viewing, 25 FPS per Camera, with built in Multiplexer ,with TCP – IP connectivity, recording on real time , high quality 2TB HDD suitable for 90 daysrecording,Resolution – 640 x 480 pixels, suitable for connecting the CCTV’s. (MAKE :-HONEYWELL) |
| 277 | Providing Supplying & Fixing of 32\"TFT Colour Monitor SAMSUNG |
| 278 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/ recess including painting in case of surface conduit,or cutting the wall and making good the same in case of recessed conduit as required. 25 mm dia 2 mm wall thickness MS conduit |
| 279 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/ recess including painting in case of surface conduit,or cutting the wall and making good the same in case of recessed conduit as required. 32 mm dia 2 mm wall thickness MS conduit |
| 280 | Power Supply Units :-12V/1 Amp Regulated Power Supply for each camera. |
| 281 | Cable:-Supplying and drawing of UTP 4 pair CAT 6LAN Cable in the existing surface/recessed Steel/ PVC conduit as required. |
| 282 | SITC of Wall mounted 6U closed racks with power supply complete as required for the network racks. |
| 283 | FIRE DETECTION SYSTEM:Providing and fixing in position 1.6mm thick M.S. outlet boxes for housing smoke detectors/heat detectors including providing 3 mm thick hylam sheet cover as required 75mm x 75mm x 75mm |
| 284 | Supplying, laying, testing and commissioning of2c x 1.5 sq mm ofLow Smoke Zero Halogen Silicon Insulated Fire Survival Cable with Drain Wire, solid copper conducter cable approved by LPCB as per BSEN 50200:2015 PH 120 (Fire, Mech Shock & Water 120 Minutes @ 830 deg Celcius, Fire & Mech Shock every 5 Min for 2 Hours- Both test conducted on same sample) and BS-6387 CWZ The cable shall sustain 950 deg. C. For 3 hours approved along with accessories/ termination glands and all necessary materials to complete. The cable shall be approved for. The cable shall be BS EN 60332-1-2:2004 for Bunched Flame Retardancy (installed as a single or bunched cable self extinguishes leaving the upper cable sheath unaffected showing the cable does not propagate fire). Cable shall be guaranteed for 10 years from the date of manufacture marked on the cable. Armored cable required for Detectors wiring – 1.5 sqm, 2 core Armored cable |
| 285 | Supply, installation, connecting, testing and commissioning of Smoke Detectors (Optical) with blinking LED etc as required complete. (approved make series 65) |
| 286 | Supply, installation, connecting ,testing and commissioning of Heat Detectors complete as required. (Rate of rise cum fixed type) (approved make series 65 ) |
| 287 | Supply, installation, connecting, testing and commissioning ofHooters(30M range) in suitable size of M.S boxas required complete. |
| 288 | Supply, installation, connecting, testing and commissioning of Manual Call Push button with Hammer etc.in suitable size of M.S as required complete. |
| 289 | Supply, installation, connecting, testing and commissioning of Remote Indicators with LED Display to be attached with the Detectors as required complete provide suitable M.S Box to house the indicator. |
| 290 | Supply, installation, connecting, testing and commissioning ofcontrol module. |
| 291 | Supply, installation, connecting, testing and commissioning ofrelaymodule. |
| 292 | Supply, installation, connecting, testing and commissioning of 2 Zone Fire Control Panelwith inbuilt battery as per specifications mentioned elsewhere in the Document complete as required.The Contractor shall provide necessary relay for each unit to switch it off in case of fire. 2 Zone Control Panel |
| 293 | Supply and Installationof LIFEGAURD MakeK-Type 4 Ltr (SS)Fire Extinguishers (wet chemical) |
| 294 | Supply and Installation of LIFEGUARD Make 4 Kg ABC Poweder Type Fire Extinguishers Is:- 15683 |
| 295 | Supply and Installation of LIFEGUARD Make 4.5 Kg Co2 Type Fire Extinguishers IS:- 15683 |
| 296 | EXHAUST AIR SCRUBBER & AIR COOLED DUCTAABLE UNIT : High Side Exhaust Air Scrubber : Supplying, installing, testing and commissioning of double skin construction (similar to specification as that of AHU) Dry scrubber unit for Kitchen exhaust.The unit shall comprise of Air intake flanges for duct connection, and Dry scrubber ESP module along with inter connection and accessories ii) Supply of Double Skiin Construction (0.6mm I/O GI sheets) Dry Air Scrubber Unit complete with Dry Scrubber ESP module and DIDW Backward Curved blowers with motor. It should be including all accessories and vibration isolators with Base channel. The Dry Scrubber ESP to be placed inside the double skin housing with Fan section. iii) Dry scrubber shall have Electrostatic precipitator/air cleaner with inbuilt starter panel to operate ESP modules. The filtration efficiency of the ESP shall be 90-95% and the ESP module cells to stacked one over another or side-by-side as per site\"s requirement.Finish of ESP- Powder CoatedOperating Voltage- 220+10%/ 50hz (1Ph)Features of ESP- Short circuit and arc protection, auto restore power supply, BMS compatibility, Auto power cutt-off in case of door opening, Indicatore LEDsParticle size- collection of upto 0.1mic size particlesIonizer plates- High grade SS/Non-Corrosive material Collector Plates- Made of high corrosion resistant material having high collection voltage of 6kVDC-12KVDC for better efficiencyPre filters- Wiremesh pre-filters to be a part of the ESP module for primary stage filtration for coarse oil particle filtration Duty : AC Space Exhaust (For kitchen AT Ground Floor Area.) Air Quantity : 4500 CFMStatic Pressure : 65mmTo 80mm of wg Motor Rating : 5.5 KW |
| 297 | Air Washer :Supplying, installation, testing and commissioning of Factory Fabricated Double skinned Cellulose Fill type Air Washer made of 25 mm thick panels consisting of G.I. Casing of thickness 0.63 mm outside layer and 0.63 mm inside layer with polyurethene foam (PUF) & 43+2 Kg/m³ density insulation factory injected between them by injection moulding machine, giving 90% saturation efficiency at 500 FPM air velocity across pads, factory assembled with fan section having Single / Multiple DIDW Backward curved blower with minimum 300 mm deep cellulose paper pads for humidification having water distribution arrangement and suitable rating water circuilating pump. Water tank & wet section shall be of stainless steel (SS 304) thickness not less than 1.2 mm having necessary arrangement of water inlet with float valve, over flow and drain arrangement. complete with Aluminum wiremess / viscous Pre filters section with 20µ (micron) particle size with an efficiency of 80%and belt drive package with TEFCsq cage induction drive motor type IE 2 suitable for 415+ 10% volts, 50 Hz, 3 phase AC supply. The airwasher shall be complete with 02 No. water circulation pump in built inside the air washer casing& 2 Pass/bend eliminator. The unit shall be integrated & connected with fan section including all necessary accessories to complete the installation etc. as per specifications and drawingsof following capacities. Supplying, installing, testing and commissioning of horizontal monobloc pumps (1 W + 1 Standby) ofsuitable rating, of Beacon weir/KEC make factory mounted on GI channel base with electric motor for circulation of water. Pumps shall be aligned and suitable for 415±10% volts, 50 cycle’s 3 phase power supply. One No. 3 phase isolator switch in weather proof enclosure shall be provided near motor Duty : AC Space Fresh Air kitchen AT Ground Floor Area.) Air Quantity : 4000 CFM Static Pressure : 65 mm wg Motor Rating : 5.5 KW |
| 298 | Air Cooled Ductable Unit For Spot Cooling : Supply ,installation & testing Commissioning of Air Cooled Ductable Units Green Refrigerent with first charge refrigerent oil & Heavy ODU Stand .The indoor unit shall be ductable split type complete withDX coil,filters,blowers with motor & drive, HP/LP cutout, thermostatic expansion valve, distributor, starterand other necessary controls to form a factorytested compact unit.The outdoor unit shall have condenser coil, fans with motor & drive, scroll compressors,panel etc.The ductable units should be complete with microprocessor panel equipped with features such as continous digital display of return air temprature ,continous display of current auto sequence starirng & stopping of compressor ,condensor & blower ,auto restarting ,auto cycle timer &seprate diagnostic display for states & faultes. The unit shall be designed to take care of veritcal head 10mt & horizontal length of 40 mt & necessary oil seprator shall be included ,Necessary supporting arrangement for both indoor & outdoor units (Powder Coated /Epoxy paintedMS stand for ODU units as per approved make shade by Architect) with necessary vibration isolation arrangement as per site condition etc.( without condensate drain pipe ,electrical pipe ,electrical power & control cabling between indoor & outdoor unit which shall be paid seprately ).The Color of the outdoor units to be finalized by the Architect as per building Architectural elevation.The capacity of Units shall be as given below : Capcity: 8.5 TR(3400CFM) Ductable Unit |
| 299 | Refrigerant Piping : Supply, installation, testing and commissioning of copper Refrigerant piping (Two Length) mounted on slotted cable tray(100MM wide) with control cable duly insulated with 13mm thick Class \"O\" Nitrile rubber insulation with UV Cloth between the above indoor & outdoor units as shown on drawing enclosed .with flare nuts, all fittings and jointing with solvent cement andincluding cutting holes in walls ,wherever required and making good the same,complete as directed by the Engineer in charge. :Make:-Rajco/Mandev (Final Quantity as per site.)8.5TR Air Cooled Outdoor Unit.(7/8\"-Suction & 1/2\"-Liquid)9mm Insulation |
| 300 | Drain Piping : Providing and fixing PVC pipe with fittings of 10 kg /cm3. with 6mm thick Nitrile rubber of Class \"O\" inculding all fittings and jointing with solvent cement and , including cutting holes in walls,wherever required and making good the same, complete as directed by the Engineer in charge. 32 mm dia O.D |
| 301 | Providing and fixing PVC pipe with fittings of 10 kg /cm3. with 6mm thick Nitrile rubber of Class \"O\" inculding all fittings and jointing with solvent cement and , including cutting holes in walls,wherever required and making good the same, complete as directed by the Engineer in charge. 25 mm dia O.D |
| 302 | Inline Fan For Exaust & Fresh Air At First Floor Kitchen Area : Supply,installation,testingandcommissioning of INLINE FAN of various capacities as given below suitable for 240 volts, 50 Hz, singlephase AC supply complete with gravity louvers & speed regulator etc. 1000 CFM For Exhaust & Fresh Air In First Floor Kitchen Area |
| 303 | Low Side. (Air Distribution) Site / Factory Fabricated Duct : Supply, fabrication, installation, testing and commissioning of G.S.S. sheet metal Rectangular Ducting complete with vanes (as required) & as per specifications &asper approved shop drawings.splitter & vanes etc. shall be apart of ducting no extra cost shall be paid for the same .All support selection shall be based on gripple wire .No other support shall be acceptable.24 G (0.63 mm) |
| 304 | Supply, fabrication, installation, testing and commissioning of G.S.S. sheet metal Rectangular Ducting complete with vanes (as required) & as per specifications &asper approved shop drawings.splitter & vanes etc. shall be apart of ducting no extra cost shall be paid for the same .All support selection shall be based on gripple wire .No other support shall be acceptable.22 G (0.80 mm) |
| 305 | Supply, fabrication, installation, testing and commissioning of G.S.S. sheet metal Rectangular Ducting complete with vanes (as required) & as per specifications &asper approved shop drawings.splitter & vanes etc. shall be apart of ducting no extra cost shall be paid for the same .All support selection shall be based on gripple wire .No other support shall be acceptable.20 G (1.0 mm) |
| 306 | Supply,installation,testingandcommissioning of M.S Duct Made Out Of HR Sheets as per IS 262/CR Sheet as per IS513.Kitchen Exhaust System.18G as per IS 262.32mmx32mm x3mm thick.2400mm Length & welded Construction. 18G M.S Duct For Kitchen Exhaust (Site Fabricated) |
| 307 | Supplying&fixingofpowdercoatedextrudedaluminiumSupply AirGrilles /ReturnAirGrilleswithoutvolumecontroldampers completeasrequired. |
| 308 | Supplying,fixingtestingcommissioningofFresh airGrilleofpowdercoatedaluminiumwithaluminiumvolumecontrol damperswithantismudgering&removablecore.(For Kitchen Area) |
| 309 | Supply,installation,testingandcommissioningofGIvolumecontrolductdampercompletewithneoprenerubbergaskets, nuts,bolts,screwslinkages,flangesetc.,asperspecifications. |
| 310 | Supply, installation, testing & commissioning of Powder coated Aluminium extruded Multicone ceiling square diffusers 4 way deflection with anti smudge ring (removal core type ) for supply / return air required as per the tender drawings. (For Restaurant Area) |
| 311 | Supplying & fixing of 50 micron powder coated Fresh & Exhaust louvers bird screen type (Aluminium extruded only) as per specification and sizes will be as per shop drawing mentioned. |
| 312 | Insulation Work : Supply & Installation of Thermal Insulation on Duct exposed to sunlight using Closed CellAnti Microbial and Anti Fungal Class O Nitrile Rubber Elastomeric Insulation of Density 40 - 60 Kg/m3, Thermal Conductivity of 0.035 W/mk at 200 Celcius Mean Temp. and Mu≥10000 and with Chemically treated Factory Laminated Woven Fibre Glass Cloth with200+/-20 gsm using manufacturer\"s recommended Rubber based Adhesive in a blend of solvents complete as per Specifications Supply and application of 13 mm thick insulation (closed cell Nitrile rubber ) |
| 313 | Acoustic Insulation For Duct : Supply and Application of Acoustic Insulation Inside the Duct with Engineered Nitrile Rubber open cell foam with Density 140 - 180 Kg/m3 passing Class 1 Fire Performance test as per BS 476 Part 7 and with built-in EPA approved antimicrobial protection; to be applied using manufacturer\"s recommended Rubber based Adhesive in a blend of solvents.15 mm thickness (Internal Lining of Ducts) |
| 314 | SIGNAGE : Providing Supplying , installation ofRoof Top Signage FrontSize (25\"10\"x6\"3\")with LED Light : Support Struct Signage25\"-10\"x6\"-3\" Main structure in MSC-CHANNEL 4\" x2\"x 6 mm front & back supported withMS C.CHANNEL 4\" X 2\"x 6 mm MS FRAME made by 2 x1x1.2mmMS HOLLOW- TUBE for given size25\"-10\"(W) X18\"-3\"(H) ACP Strips of 1.2 mm WHIIEPOWDER-COATED at the back of letters \"CG work2x2xZ.\"feel(6 nos) 8310 ii) *-Letter Height 4 feetMALE-letters in MAlEletters in 4 mm 040 ACRYLIC with 4 mm BLACK ACRYLIC at the sides as per design. FEMAlE-letters in ACP Strips with powder-coated \"ECO-SOLVENT at the top and inside of acrylic - SAIV]SUNG CHIP LED with UNION LED DRIVERS - TINlER &STABILIZER to counter voltage fluctuatlons Comlete as per Directed.Rate also including for all Installation work,required Scaffolding, Stagging , Plateform for any Height etc for Complete Work. |
| 315 | Providing Supplying , installation ofButton Sign (24\"x24\") with LED Light : with 5 mm 040 ACRYLIC by THERMOFORMING ECO-SOLVENT print double-layer pasted atop acrylic side in SS CASING illumination with SAMSUNG CHIP LED with UNION LED DRIVERS 1.2 mm painted SS Female letters in the inside for fixture of LEDsComlete as per Directed.Rate also including for all Installation work,required Scaffolding, Stagging , Plateform for any Height etc for Complete Work. |
| 316 | Providing Supplying , installation ofEntrance Monument Sign & Porch Signage (8\"9\"x1\"6\") : Entrance Signage with IHCL Brand Ginger ietter height 1.5 feet IHCL letter height 4.78 lnches [/ale letters with 040 4 mm Acrylic on front Female letters with 4 mm Black Acrylic $ide with 4 mm BlackAcrylic llluminated with Samsung Chip LED Modules with jumboLED Drivers 3hn SAV print pasted on front face of maleIetters 1O MM SOLID BLACK ACRYLIC lasser cut letters for an IHCL Brand Size : 8.75 feet (W) X 1.5 Feet(H) Rate also including for all Installation work,required Scaffolding, Stagging , Plateform for any Height etc for Complete Work. |
| 317 | Dismantling of Gypsum Ceiling &carrying out fromsite to out side of site premices within accordance to local municipal regulations including carrying carting trips &.rate also including of necessary labour, tools,scaffolding etc. as persuggested by Engg-in-charge. |
| 318 | Providing and fixing False ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/Sq.Mt. (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm Each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing periR.Mt. channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the periR.Mt. of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and periR.Mt. channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of periR.Mt. channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :(12.5 mm thick tapered edge gypsum moisture resistant board) |
| 319 | Providing & Applying 12 to 15 mm th. P.O.P. layers onPlastered wall surface & even and smooth complete as perrequired or directed by Enggin charge including hacking finishing smooth, with proper level & handed over a clean & neat condition complete the work should be done as per directed by engineer in charge. |
| 320 | Providing & Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer |
| 321 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 Sq.Mt. over and including one coat of Special primer applied @ 0.75 ltr/10 Sq.Mt. |
| 322 | wiring for Twin Controll Light Point with 1.5 sq.mm FRLS PVC Insulated Copper Conductor single Core Cable in Surface/ Recessed Medium Class PVC Conduit 2 waymodular Switch, Modular Plate Suitable GI Box and earthing the point with 1.5 Sq mm FRLS PVC Copper Conductor Single Core Cable as Required |
| 323 | SITC of 6A Plug Point with 6A Switch with Front Plate and Back box to be fix recess wall |
| 324 | SITC of 16A Plug Point with 16A Switch with Front Plate and Back box to be fix recess wall |
| 325 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed medium steel conduit as required. 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire. |
| 326 | Supplying and erecting LED indoor fittings with LEDS of wattage 0,2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 120 to 300 V,Power Factor more than 0.9, THD 10%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt LED efficiency 110 lumens/watt. LED driver efficiency > 85%PHILIPS/ HAVELLS/FORTUNEART/ LIGHTING WAYS make LED used for luminaire. ( fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The Engineer incharge may select any wattage capacity between the ranges shown.) (C) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20(b) 11-15 watts, Surge-2 KV Cat-Ill |
| 327 | E) LED Strip Light(a) Minimum 4.8W-120 LED per R.Mt. (2 wire, IP- 65) with non integral suitable Driver complete Cat-111 |
| 328 | Providing and erecting decorative wall bracket fittings complete with LED lamp and rust free fittings components mounted in chrome finish housing with holder,clear/opaque glass diffuser complete erected with lead wires with minimum 15 wattage capacity as per instruction engineer incharge/architect/authority |
| 329 | SITC of Addressable Smoke detector |
| 330 | HVAC WORK: Outdoor Units of VRF System : Supply and Installation ofCompact Air Cooled type outdoor units of VRF System Outdoor unit modular type variable refrigerant flow/variable refrigerant volume air cool outdoor units suitable for cooling and heating having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules shall be used in designing & supplying of the units. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. Each Outdoor units with High Pressure switch, Fan driver overload protector, Over current relay, Inverter Overload Protector & Fusible Plug. The unit shall be suitable for 415 ± 10 % volts, 50 Hz, 3 phase AC supply, and IP 55 protection. Refrigerant to be used: R-134a/R-32/R-600a/R-290/ R-410a orany other eco-friendly refrigerant. 12HP Capacity DAIKIN |
| 331 | CASSETTETYPE VRF Indoor Unit DAIKIN Supply, installation, testing and commissioning of 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required 2.0 TR 4 Way Flow Cassette Type Unit |
| 332 | Supply, installation, testing and commissioning of 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required2.6TR 4 Way Flow Cassette Type Unit |
| 333 | VRF System Remote Controller Supply / Installation / Testing and Commissioning of Cordlesss remotes for VRF indoor units ( For Cassette Type IDUs ) |
| 334 | Branch Distrubution refrigerant Pipe joints with precase insulation Supply andfixing ofV-Joint/REF-NET |
| 335 | SITC of Seamless heavy gauge Copper piping of following size duly insulated with 19mm thk. Nitrile Rubber Insulation .Refrigeration piping will have to be taken in the piping rack / engineered Support as specified individually connecting to all indoor units for the respective floors. Even necessary supports, fittings, valves & ref. joints where ever required will be included. Copper piping including all supports , insulation as specifiedforHP VRF ODU andTR VRF IDU (complete job for 4 Rooms+ 1 dormitory) |
| 336 | Supply, laying, testing and commissioning of Communication cabling , unarmoured, Copper conductor with PVC conduit complete in all respect 2C x 1.5 sq.mm Communication Cable between Outdoor Units & Indoor Units with PVC conduits (complete job for 4 Rooms+ 1 dormitory) |
| 337 | Providing & Supplying & instalattion of MS STAND For Out door Unit Complete as per requirement (complete job for 4 Rooms+ 1 dormitory) |
| 338 | Supply of R410 Refrigerant Gas (complete job for 4 Rooms+ 1 dormitory) |
| 339 | 3rd Floor bedroom Area Suite Bedroom .Double Bed with fabric finish: Providing and fixing size - 2020mm L x 1780mm W x 200mm H of bed base as per below mention sizes constructed using 20mm thick BWR ply using required hardwood batons / aluminium / wooden framework. Front & sides of the bed base to be finished with app veneer with polishing workas per approved sample. Cost to including making cutouts for ventilation, necessary support system, polishing onwooden sections, all consumables, nails, adhesive, making provision for fixing of ledge,wooden beadings, lipping, margin, wooden battens,making provision for fixing of ledge/shelf, wastage and all necessary arrangements etc. all completeas per the design, detail drawing, specifications and to the satisfaction of Project Manager. |
| 340 | Head Board panneling with wallpaper: Providing and fixing head Board back panelling made out with 12mm thk BWP plywood andto include installation and cut out for Electrical switches if any as per detailed drawing and of all kinds ofprofiles and cut outs required for light fixtures. L- 2800 X 2100mm H |
| 341 | Bed Side Table: Providing & fixing 450mm W x 450mm D x 350mm H side table made with 19mm thk BWP plywood and finished with App shade veneer compitable adheshive.Cost to include necessary frame work to achieve required profile |
| 342 | Providing & fixing Wardrobesize-1800mm W x 600mm D x 2400mm H |
| 343 | TvUnit: Providing and supplying Tv unit made with 19mm BWP plywood finish with approved shade 04mm thick veneer with all surafce finish in polishing work as per details DWG or site engineer insturction. Size: L- 1220 X H- 2450mm |
| 344 | Vanity Counter: Providing and fixing vanity countersize 1050 L x 600 D x 850 mm high top finished in stone , Facia finish in app Veneer(match to room furniture)pasted over base frame made of 19mm thick BWP ply and Alumnium /wooden frame.Cost to including necessary support system, necessary aluminium framework to achieve required design, hardwares, making of cutouts, edge molding / chamfering, finishing of edges &making provision for MEP fixtures, cutting, wastage, metal sections, making & finishing of light cove underside of shelf unit, cleaning etc. complete as per detail drawing, specification and as directed by Project Manager. |
| 345 | Luggage rack: Providing and fixing Luaggage rack made out of 19mm thick plywood with 04 thick veneer installedCost to include the profile of the running resk as shown in detailed drawing with all edges to be smooth finish. size of luaggage rack-size: 900mm W x 450mm D x 500mm H |
| 346 | Study Table: Providing and fixing study table with 2 Nos drawer & top Bavlleding Glass finishmade out of 19mm thick plywood with 04 thick veneer installedCost to include the Glass polishing all as per details DWG or site engineer instruction. |
| 347 | Study Chair: Providing and Supplying study Chair with wooden Base and Fabric as per details DWG. |
| 348 | CURTAINS : Providing & fixing French/3-pleated/pinch curtains ofpleat depth 4 cm, @ 200 c/c, from ceiling to floor level, with PVC/ aluminium track, with PVC curtain hooks at the line of Each pleat, as per design and/or as directed by the Architect (material-free supply from client, base cost of cloth Rs.400/R-m.) |
| 349 | Providing and fixing Lamp on Bed side Table as per details dwg or Architecture instruction. |
| 350 | Providing and installing SMART LED TV size: 50\" as per Architecture instruction. |
| 351 | Providing and Fixing Telephone as per details dwg or architect instruction. |
| 352 | Providing and fixing Veneer Finish Jamb made with 19mm BWP plywood finish with 04mm thick approved shade veneer & melamine polish finish as per details DWG or site engineer instruction. |
| 353 | Providing and Fixing Plywood Pelmet finish with 06mm thick MDF finish with paint as per details DWG or site engineer instruction. |
| 354 | BEDROOM AREA ACCESORY: Providing and supplying of acrylic kettle tray set: 3 pc set white/black, big tray with sachet holder +service tray as per selection by architect and eng-in charge |
| 355 | Providing and supplying and fixing of iron board: hotel standard fr silver color fabric, fold able and adjustable height, industrial grade ms powder coated frame,powder coated black color as pe selection by architect and eng incharge -1200mmx 375mm x 750mm |
| 356 | Providing,supplyingof Philips iron: with steam or with steam and water spray or dryiron, as per selection architect and eng. Incharge |
| 357 | Providing, supplying and fixing of weighting scale:transparent and black base 150 kg max, digital icd display as pe selection |
| 358 | Providing, supplying and fixing of wooden regular hanger, as perselection architect eng.in charge (As per Standard size available in market) * |
| 359 | Providing, supplying and fixing of soft shoes :non woven anti, Indian size with binding logo print w/ moq , as perselection architect eng.in charge |
| 360 | Providing, supplyingofash tray : SS 201,with without lid , as per selection architect eng.in charge |
| 361 | Providing, supplying and fixing ofshaving mirror : wall mounted 200mm X75mmx 25mmx aa brass except SS base , as perselection architect eng.in charge |
| 362 | Providing, supplying and fixing ofclassic model double container 350ml capacity , as perselection architect eng.in charge |
| 363 | Providing, supplying and fixing ofhair dryer fold able stand alone on call, as perselection architect eng.in charge (As per Standard size available in market) * |
| 364 | Providing, supplying and fixing of toilet tissue roll holder: brand dazzle ss304 grade non rust able , as perselection architect eng.in charge |
| 365 | Providing, supplying and fixing of towel rack: brand: dazzle ss304 grade , non rust able available 24\", as perselection architect eng.in charge |
| 366 | Providing, supplying and fixing of clothes hook : brand: dazzle ss304 grade , non rust able , as perselection architect eng.in charge |
| 367 | Providing, supplyingof pillow protector -17\" x27\" quited with zip, as perselection architect eng.in charge |
| 368 | Providing, supplyingof Mattress protector 71\" x 79\" L terry with tpu 100% water proof , as perselection architect eng.in charge |
| 369 | Providing, supplyingofNapkin18\" x 21\" white satin band , as perselection architect eng.in charge |
| 370 | Providing, supplying of floor Matt 20\" x 30\" 300gms box border 100% cotton , as perselection architect eng.in charge |
| 371 | Providing, supplyingof Cushion 30\" x 18\" Hsd, as per selection architect eng.in chage |
| 372 | Providing, supplying and fixingof bed runner 17\" x 95\" color jacquard, as perselection architect eng.in chage |
| 373 | Providing, supplying and fixing ofbath robe xl waffle, as perselection architect eng.in chage (As per Standard size available in market) * |
| 374 | Providing, supplying and fixing ofNapkin rod of 15 inch on vanity black finish , as perselection architect eng.in chage |
| 375 | Provide, supply & Fixing of safe locker ( Godrej) -12\" x12\" x 12\" |
| 376 | Providing and supplying of 304 Stainless Steel Kettle Black 1.2 Ltr |
| 377 | Providing and supplying ofABS Soap Dispenser 800ml |
| 378 | Providing and supplying & Fixing ofPaper Dispenser White (As per Standard size available in market) * |
| 379 | Room Round Waste Bin Black (220*255*0.4) |
| 380 | Providing and supplying ofIce bucket (As per Standard size available in market) * |
| 381 | Providing and supplying of bed Rajayias per Dwg Shown. (For Rooms bed)(2 Nos ofset) |
| 382 | Providing and supplying of 8\" thick Metteres king size as perselection architect eng.in charge |
| 383 | Loose Furniture In G.F bedroom Area: 2 seater Sofa:Providing and fixing 2 seater sofa made with wooden stucture with High density foam and approved shade fabric/leather all wooden surface finish with polish work as per Site engineer/Architect Instruction. |
| 384 | Center Table: Providing and supplying Center Table/Cofee Table as per Details DWG. |
| 385 | Other Work in Daman House. Providing and Supplying installing FRD AssaabloyWingaurd Lock with software & card as per slection. |
| 386 | Providing and suplying Mini Freezer. (Godrej) |
| 387 | Providing,supplying and fixing of philips iron: with steam or with steam and water spray or dryiron, as per selection architect and eng. Incharge |
| 388 | Providing and Supplying Iron Stand. |
| 389 | Provide, supply & Fixing of safe locker ( Godrej) -12\" x12\" x 12\" |
| 390 | Cafeteria : Providing and Supplying 4 seater Dining Table Made up of Solid White Ashwood with Wooden finish top duly Polished in Matt Finish Leg Wooden, Table Top WoodenComplete As Per drawing |
| 391 | Providing and Supplying of Dacorative Chair for Dining Table Mixed Made up of Ashwood duly Polished in Matt Finish Leg Wooden, Complete As Per drawing ColourYellow, Kaki, Anthractile As per directed By Architect. |
| 392 | Providing and Fixing of Full height Flush Partition.(Laminate Finished)made Solid part of partition made from Aluminium frame work shall comprise of 50mm x 25mm x 1.2mm thk members aluminium sectionat regular distance of 600 x 600mm c/c both ways (As per drawing) andboth side covered with 8mm th marine Ply & 4mm thk Approved Laminate Cladding with groove pattern & Finished withrequired teak wood Beading , as per Drawing& all necessary hardware.etc.The rate should also include of Applying anti-termite and anti- borer paint to wooden frame work wherever directed . (Quantity measured on elevated part at bottom of ceiling level & Door will be measured and paid separately) |
| 393 | Providing and fixing 35 mm thick Flush door filled with country wood, water proof flush door Single shutters with 1 mm high end laminate sheet on both side of the door with Lipping edging pattiwith Polishing/ Melamine polish or as per directed all around the door. Also provide SS Kick plate on both side of door (900mm ht or as per Drawing) or as per Directed by Architect. The door would have vision glass panel with 6mm glass including cutting, fixing all where required. The door with also have accessory like 2 Nos pull SS handles in Brush finish of the size 25mm diameter, made from anti corrosive high grade AISI 304 stainless steel. Providing and fixing one number of 10 mm diameter 20 cm long anti corrosive high grade AISI 304 stainless steel tower bolt, with fixing SS heavy duty screws to the frame & also Provide Hydraulic door closer bottle type (Heavy duty) M.S. body with necessary accessories and screwsas per Drawing or as directed , complete as approved by Engineer -in-charge etc. complete as per detailed drawing. (Allaccessoriesbrand: Ozone, Kich As per Architect Selecttion) |
| 394 | Providing & Fixing of Single shutter Fire Resistant door Made from1.0mm thick galvanized steel sheet formed to provide a 48mm thick fully flush double skin door shell with seamless weding joint all around finished with zink phosphated with epoxy primer and pu paint fire rated doors have achieved a fire rating ranging from 90 min. Doors can be fitted with premium quality intumescent Strips and smoke seals to provide FD30, Fire-rated frames are made from 1.6mm galvanized steel sheet formed to single rebate profile of size 100mm x 57mm with maximum bending radius of 1.4mm finished with zink phosphated with epoxy primer and pu paintFire Rated Vision glass using 6mm thk vetrotech 2 hours fire rated of size 200mm x 300mm & shutter to be fixed with using 4 nos heavy duty hinges of approved brand with450mm long 20mm diaApproved SS matt finished handle on both side of shutter with necessary hardware door closer, Penic Bar,approved locking system etc.Complete as per design Size 1050 x 2100mm |
| 395 | Providing & Fixing of Double shutter Fire Resistant door Made from1.0mm thick galvanized steel sheet formed to provide a 48mm thick fully flush double skin door shell with seamless weding joint all around finished with zink phosphated with epoxy primer and pu paint fire rated doors have achieved a fire rating ranging from 90 min. Doors can be fitted with premium quality intumescent Strips and smoke seals to provide FD30, Fire-rated frames are made from 1.6mm galvanized steel sheet formed to single rebate profile of size 100mm x 57mm with maximum bending radius of 1.4mm finished with zink phosphated with epoxy primer and pu paintFire Rated Vision glass using 6mm thk vetrotech 2 hours fire rated of size 200mm x 300mm & shutter to be fixed with using 4 nos heavy duty hinges of approved brand with450mm long 20mm diaApproved SS matt finished handle on both side of shutter with necessary hardware door closer, Penic Bar,approved locking system etc.Complete as per design Size 1500mm x 2100mm |
| 396 | Armstrong Metal Ceiling (600mm x 600mm Vector Plain)Providing and fixing Metal false ceiling system manufactured by Armstrong using hot dipped galvanized steel section, rotary stitched main tee of size 24mm x L Prelude Section , having 0.36 mm gauge at every 600 mm centre to centre maximum and rotary stitched cross tee of size 27 mm, having 0.33 mm gauge at every 600 mm. c/c. and wall angle of size 19 x 19 mm., having 0.35 mm gauge fixed to the periphery of the wall. The above grid is suspended at every 600mm c/c. in both directions using 2.0 mm. thick pre-straightened GI wire laying, steel ceiling tiles (Metal ceiling Vector Plain) manufactured by Armstrong ,including light fixtures cutting gala in ceiling |
| 397 | Providing ,fixing & Erecting of Counter For Bain Marie(3250mm x 1200mm x750mm ) size and shape as per drawing. Counter topMade 25mm thick from marine Ply& Vertical support made up with 18mm Plywood With Laminate as per required &all Exposed side Finished with 1mm thk. ApprovedLaminate &Provide 16mm thk Approved Granite top as per drawing.The counter shall have Sliding shutter with aluminium Profile shutter & Glass& shall have drawer of 100mm wide on top level& back side and bottom to be provided with 12mm th. Plywood with 0.8mm thk Laminate Drawer to be lockable and slidingon aluminum drawer channels , shelves with fitting of required and approved hardware, materials & labour etc. The work to becompleted as per detaileded drawings and design or as approved by the Architect or Engineer-in-Charge. |
| 398 | Providing ,Fixing & Erecting of Bufet Counter (5100mm x 660mm x750mm ) size and shape as per drawing. Counter topMade 25mm thick from marine Ply&& Vertical support made up with 18mm Plywood With Laminate as per required &all Exposed side Finished with 1mm thk. ApprovedLaminate &Provide 16mm thk Approved Granite top as per drawing.The counter shall have Sliding shutter with aluminium Profile shutter & Glassinside Finished with 0.8mm thk Laminate shelves with fitting of required and approved hardware, materials & labour etc. The work to becompleted as per detaileded drawings and design or as approved by the Architect or Engineer-in-Charge. |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail