Making Accessible Building Features Under Accessible India Campaigning At Archives Building Library Block Sso Building At Rajasthan Secretariat Jaipur. (Joinery Work)- Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 gradeGhana Teak Wood Grade-I (B-8/8.1.5) 2 Providing and fixing external grade board solid core single flush door shutters ISI: 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per Annexure-A 35mm thickDecorative teak veneer both side (B-8/8.13.3.3) 3 Extra for providing external lipping with 2nd class teak wood battens 6mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item (B-8/8.14) 4 Extra for cutting rebate in flush door shutters for making double leaf shutter (Total area of the shutter to be measured) (B-8/8.17) 5 Extra for providing other type fittings as mention in Annexure-A (as per approved by Engineer-in-charge) Brass fittings (B-8/8.18.1) 6 Providing and fixing IS: 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. (B-8/8.27) 7 Providing and fixingaluminum workfor doors, windows, ventilators and partition with extruded built up standard tubular/appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gap. at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc, all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion Powder coating aluminium( min thickness of powder coating 50 micron) (B-16/16.1.1.2) 8 Providing and fixingaluminum workfor doors, windows, ventilators and partition with extruded built up standard tubular/appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gap. at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing/paneling, 9 C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc, all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling to be paid for separately). For shutters builtup standard tubular sections of openable doors, windows & ventilators including providing & fixing hinges/rollers etc. and making provision for fixing of fittings wherever required (locks shall be paid for separately). Powder coating aluminium( min thickness of powder coating 50 micron) (B-16/16.1.2.2) 10 Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin, of approved brand and manufacture in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Prelaminated particle board with decorative lamination on both sides. (B-16/16.4.2) 11 P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washersOther sizes (S-1/1.44.2) 12 Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Grade 304 13 Providing & Fixing Aluminium composite panel of indo bond/euro/flexi bond of equivalent made 3mm that with 0.5mm thick skin& PVDF coated of approved shads for toilet door in double layer in Aluminium frame complete in all respect as per sample approved by Engineer in Charges.
