|
| 1 | R.C.C. (1:2:4) : M & L for providing reinforced cement concrete type m-20, 1:2:4 mix (using 20 mm graded stone aggregate) as in column,beams, cantilevers, lintel or precast slab etc. and excluding use and waste of necessary formworkas ordered by EIC/SIC. |
| 2 | Form work : Useof wooden form workto soffits of suspended slabs such as roof slabs, floor slabs, landings, landing beams, roof beams and similar work; not exceeding 200mm thick (Horizontal or sloping) complete as ordered by EIC & SIC. |
| 3 | Reinforcement : M & L for providing reinforcementwork with TMTmild steel bars 08 mm and over, cut to length, bent to shape required, including cranking, bending, hooking ends & binding with mild steel wire (annealed) not less than 0.9 mm dia. etc.complete as ordered by EIC/SIC. |
| 4 | Ceiling plastering (1:4) : M & L for rendering 10 mm thick cement plaster 1:4 mix in ceiling or concrete surfaces of any description as ordered by EIC/SIC |
| 5 | Wall plastering(1:6): M & L for providing 12 mm thick cement plater 1:6 mixon fair faces of brick work or concrete surfaces at any height as ordered by EIC/SIC. |
| 6 | Taking down plastering : Labour only for taking down cement or cement lime plaster of any description, flush pointing, any painting etc. from brick wall, Ceilling & chajjas etc. including raking out joints, hacking for key, scrubbing down with water etc. complete as ordered by EIC/SIC. |
| 7 | White washing wall : M & L for applying two coats of white washing with blue tint on wall old decorated surfaces of any description after necessary preparation of the same as ordered by EIC/SIC. |
| 8 | White washing ceiling : M & L for applying two coats of white washing with blue tint on old decorated ceiling of any description after necessary preparation of the same as ordered by EIC/SIC. |
| 9 | Washable distempering :M & L for applying two coats of washable distemper of 1st quality make- Asian / Berger / ICIor substantially equivalent make and approvedshadeafter necessary preparatory work withprimer to distempering on wall as ordered by EIC/SIC. |
| 10 | Wood painting : M & L for applying single coat of synthetic enamel paint finished glossy 1st quality; make- Asian / Berger / ICI , or substantially equivalent make and shade onwood or wood based materialsover 10 cm width or girth after necessary preparationof old decorated surfaces as ordered by EIC/SIC. |
| 11 | Polishing : M & L for polishing on surfaces of any description width or grith including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats as ordered by EIC/SIC. |
| 12 | Wall paint : M & L for applying one coat of synthetic enamel paint finishd glossyof 1st quality; make- Asian / Berger / ICI,or substantially equivalent make and approvedshadeafter necessary preparation of wall surfaces over 10 cm width or girth as ordered by EIC/SIC. |
| 13 | Plastic emulsion paint : M & L for applying two coats of plastic emulsion paint of 1st quality; make- Asian / Berger / ICI, approved make & shade after necessary preparation of old decorated surfaceswith primer of any descriptions over 10 cm width or girth as ordered by EIC/SIC. |
| 14 | Steel painting : M & L for applying single coat of synthetic enamel paint finished glossy 1st quality; make- Asian / Berger / ICI,or substantially equivalent make of approved make and shadeafter necessary preparation of old decorated steel surfaces over 10 cm width or girth as ordered by EIC/SIC. |
| 15 | Preparation of surface & Primer for weather coat paiting : M & L for applying one coat of primer (suitable for weather coat painting) of 1st quality; make- Asian / Berger / ICIor substantially equivalent make after necessary preparation ofwall surfaces of any description as ordered by EIC/SIC. |
| 16 | Exterior surface painting : M & L for applying one coat premium acrylic smooth exterior paint with silicone additives of required shade on old plastered surfaces @0.83 ltr/10 sqm with Asian/Berger/ICIor substantially equivalent makeas directed and all completed as ordered by EIC/SIC. |
| 17 | Uprooting of plants : Labour only for complete uprooting of plants of any girth and any description after thatm & l for using acid/copper sulphate in the root position of plants and making good the dismantled area by using cement mortar 1:3 complete all as ordered by EIC/SIC. |
