Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-01-2025 | Corrigendum07 | BOQ | 21-01-2025 |
| 2 | 06-01-2025 | Corri06 | Date | 21-01-2025 |
| 3 | 30-12-2024 | Corri05 | Date | 14-01-2025 |
| 4 | 23-12-2024 | Corri04 | Date | 07-01-2025 |
| 5 | 16-12-2024 | Corri03 | Date | 31-12-2024 |
| 6 | 06-12-2024 | Corri02 | Date | 24-12-2024 |
| 7 | 02-12-2024 | Corri01 | Date | 17-12-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling of wall and ceiling board (fiber pulp, insulation, etc) or insulation boards/brackets, any thickness including frameworkanddisposal of unserviceable materials within 50 metres lead. |
| 2 | M&L for providing and fixing tiled false ceiling of 12.5 mm thick fully perforated gypsum board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/ c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles in the grid including, required cutting, making opening , opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main\"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 3 | Supply and fixing 12.5mm thick gypsum ceiling boards of size 595mm X 595mm, fully perforated made from plaster board having glass fiber confirming to IS 2095 Part-I, having perfortions of 9.7mm X 9.7mm at 19.4mm c/c backed with non wooven tissues having an NCR of 0.79 with 50mm resin bonded glass wool backing in true horizontal level suspended on existing interlocking metal. |
| 4 | M&L Painting ceiling boards with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour over priming coats with water thinnable cement primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content less than 50 grams/ litre. |
| 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, of area 3 sqm and below architrave, holdfasts etc. complete and stacking within 50 metres lead. |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, of area beyond 3 sqm architrave, holdfasts etc. complete and stacking within 50 metres lead. |
| 7 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 8 | M&L for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for fixed portion aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately). |
| 9 | M&L for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately). |
| 10 | M&L for providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 11 | M&L for providing and fixing float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). |
| 12 | M&L for providing and fixing double action hydraulic floor spring with stainless steel cover plate minimum 1.25 mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 13 | M&L for providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 14 | M&L for providing and fixing powder coated minimum thickness 50 micron aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge. |
| 15 | M&L for providing and fixing factory made PVC door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm MS square tube, the vertical door frame profiles to be reinforced with 19x19 mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using MS screws of 65/ 100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 16 | M&L for providing and fixing 30 mm thick factory made plain panel PVC door shutter consisting of frame made out of MS tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. MS frame shall have a coat of steel primers of approved make and manufacture. MS frame covered with 5 mm thick heat moulded PVC \"C\" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the \"C\" Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawing. |
| 17 | M&L for providing and fixing 200x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. |
| 18 | M&L for providing and fixing 150x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. |
| 19 | M&L for providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. |
| 20 | M&L for providing and fixing 100x63x3.2 mm ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. |
| 21 | M&L for providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. |
| 22 | M&L for providing and fixing 100 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. |
| 23 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-charge. |
| 24 | M&L for providing and laying in position cement concrete type D2 (40mm graded stone aggregate) as in foundation filling and mass concrete. |
| 25 | M&L providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg per square metre for damp proofing after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 26 | Taking downroof WPT/plaster of any discription including lose surface, scraping of surface with wire brush or any other method, sweeping, clean & whasing down with water to remove dust etc and removing scraped materials outside of MOD land. |
| 27 | M & L for Brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directed Engr-in-Charge. |
| 28 | M&L for 10mm thick screed bed or bedding layer in CM 1:4 mixed with liquid water proofing compound as per manufacturar instructions. Roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified or directed. (Note : Liquid WPC shall be measured and paid seperately) |
| 29 | M & L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt.not less than 150 gms/Sqm) land on primed surface by forced application complete all as specified and applying a coat of solar reflective bituminous aluminium paint on top of membrane. |
| 30 | Supply of liquid water proofing compound ISI marked complete all as specified and directed. |
| 31 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. |
| 32 | Demolishing RCC work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 33 | Dismantling tile work of thickness of tiles 10 mm to 25 mm in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 34 | M&L for providing and fixing 1st quality ceramic glazed tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 : 3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and directed Engr-in-charge. . |
| 35 | M&L for providing and laying rectified glazed ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1 : 4 (1 Cement : 4 Coarse sand) bed, jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete all as specified and directed Engr-in-charge. . |
| 36 | M&L for providing and laying vitrified floor tiles size 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 : 4 (1 cement : 4 coarse sand) bed, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc, complete all as specified and directed Engr-in-charge. |
| 37 | M&L for providing and laying vitrified tiles size 600x600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 38 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 39 | M&L for providing and fixing 18 mm thick Granite stone slab all colour and texture except black, cherry/ ruby red, area of slab upto 0.50 sqm, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 : 4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish complete at all levels. |
| 40 | M&L for 25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand). |
| 41 | M&L for Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 42 | M&L for Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement |
| 43 | Demolishing brick work In cement mortar, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 44 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in CM 1:6complete all as specified and directed. |
| 45 | M&L for brick work with sub class \"B\" bricks straight or curved on plan to any redius in half brick thick wall built inCM 1:4 complete all as specified and directed. |
| 46 | Taking down cement plaster, any description on brick or stone wall etc, including raking out joint, hacking for key, scrubbing down with water complete all as specified and directed. |
| 47 | M&L for 15 mm thick cement plaster of mix 1 : 6 (1 cement : 6 fine sand) on brick or concrete surface complete all as specified and directed. |
| 48 | M&L for 15 mm thick cement plaster of mix 1 : 4 (1 cement : 4 fine sand) on brick or concrete surface complete all as specified and directed. |
| 49 | M&L for providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 50 | M&L for Distempering two or more coats on new work with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. |
| 51 | M&L for Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 52 | M&L for One or more coats on old wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade complete all as specified and directed. |
| 53 | Taking up or down 15mm dia steel tubing and connections including cleaning and refixing or removal to stone complete all as specified and directed. |
| 54 | All as per srl item No 53 above but 20mm dia of pipe. |
| 55 | All as per srl item No 53 above but 25mm dia of pipe. |
| 56 | Disconnecting damaged overhead/ terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. |
| 57 | M&L for providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 58 | M&L for providing and fixing 15 mm dia nominal bore GI pipe medium grade concealed pipe complete with GI fittings and clamps, making good the walls etc., including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. |
| 59 | M&L for providing and fixing 15 mm dia nominal bore GI pipes medium grade exposed on wall complete with GI fittings and clamps, including cutting and making good the walls etc complete all as specified and directed. |
| 60 | M&L for providing and fixing 20 mm dia nominal bore GI pipes medium grade exposed on wall complete with GI fittings and clamps, including cutting and making good the walls etc complete all as specified and directed. |
| 61 | M&L for providing and fixing 25 mm dia nominal bore GI pipes medium grade exposed on wall complete with GI fittings and clamps, including cutting and making good the walls etc complete all as specified and directed. |
| 62 | M&L for providing and fixing 15 mm nominal bore CP brass long nose bib cock of approved quality conforming to IS : 8931 standards and weighing not less than 810 gms. |
| 63 | M&L for providing and fixing 20 mm nominal bore brass stop cock of approved quality. |
| 64 | M&L for providing and fixing 15mm nominal bore CP brass angle valve of approved quality conforming to IS : 8931. |
| 65 | M&L for providing and fixing 15 mm nominal bore CP brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931. |
| 66 | M&L for providing and fixing PTMT Ball cock 20 mm nominal bore, 120 mm long, weighing not less than 198 gms; of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 67 | M&L for providing and fixing white vitreous China flat back wash basin size 550x400 mm with single 15 mm CP brass pillar tap with CI brackets, 32 mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. |
| 68 | M&L for providing and fixing 15 mm nominal bore with 45 cm length unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 69 | M&L for providing and fixing 100 mm diameter CP brass shower rose with 15 or 20 mm inlet. |
| 70 | M&L for providing and fixing in PTMT towel rail 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gmscomplete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 71 | M&L for providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with 5 litre white P.V.C. automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. |
| 72 | Dismantling 75 to 80 mm dia CI, PVC or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead. |
| 73 | Dismantling 100 mm dia CI, PVC or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead. |
| 74 | M&L for providing and fixing 75 mm dia Sand cast iron S&S waste and vent pipes as per IS : 1729. |
| 75 | M&L for providing and fixing 100 mm dia Sand cast iron S&S waste and vent pipes as per IS : 1729. |
| 76 | M&L for providing and fixing 75 mm dia sand cast iron S&S plain bend of required degree as per IS - 1729. |
| 77 | M&L for providing and fixing 100 mm dia sand cast iron S&S plain bend of required degree as per IS - 1729. |
| 78 | M&L for providing and fixing 75 mm dia sand cast iron S&S bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete as per IS - 1729. |
| 79 | M&L for providing and fixing 100x100x100 mm Sand cast iron S&S single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete as per IS - 1729. |
| 80 | M&L for providing and fixing 75x75x75 mm Sand cast iron S&S single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete as per IS - 1729. |
| 81 | M&L for Sand cast iron S&S Slotted cowl (terminal guard) 100 mm dia. |
| 82 | M&L for providing and fixing on wall face 110 mm diameter unplasticised Rigid PVC Single socketed rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 83 | M&L for providing and fixing on wall face 75 mm diameter unplasticised Rigid PVC Single socketed rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 84 | M&L for providing and fixing on wall face unplasticised - PVC moulded 87.5° Bend 75 mm for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 85 | M&L for providing and fixing on wall face unplasticised - PVC moulded 87.5° Bend 110 mm for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 86 | M&L for providing and fixing 100 mm SCI trap with 100 mm inlet and 75 mm outlet complete all as specified and directed by Engr-in-Charge. |
| 87 | M&L for providing and fixing white vitreous China Orissa pattern WC pan of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls fixed in repairs. |
| 88 | Fixing only in repairs stainless steel kitchen sink with CI brackets and stainless steel plug 40 mm, Flexible (coil shaped) PVC waste pipe 32mm dia with length not less than 700 mm including PVC waste fittings including painting of fittings and brackets, cutting and making good the walls wherever required. |
| 89 | M&L for providing and fixing in repairs stainless steel A ISI 304 (18/ 8) kitchen sink 510x1040 mm bowl depth 250 mm as per IS : 13983 with CI brackets and stainless steel plug 40 mm, Flexible (coil shaped) PVC waste pipe 32mm dia with length not less than 700 mm including painting of fittings and brackets, cutting and making good the walls wherever required. |
| 90 | M&L for providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete. |
| 91 | M&L for Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. |
| 92 | M&L for Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 : 2 (1 cement : 2 Coarse sand) to match the existing floor with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. |
| 93 | Supply only chemical emulsion Chlorpyriphos/ Lindane emulsifiable concentrate of 20% in sealed containers including delivery as specified. |
| 94 | Dismantling G.S. Sheet roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead. |
| 95 | Supplyand fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 96 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 97 | M&L for Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete all as specified and directed by Engr-in-Charge. |
| 98 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. cum |
| 99 | S&F Venitian blinds (Designer pattern) of washable fabric material, with aluminium channels, operating arrangements etc complete all as specified and as directed. |
| 100 | M&L for Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) |
| 101 | M&L for Thermo-mechanically treated steel reinforcement bars of grade Fe-500D or more for RCC work including straightening, cutting, bending, placing in position and binding all complete upto or above plinth level. |
| 102 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 103 | Taking up or down 40mm dia steel tubing and connections all as specified and directed. |
| 104 | Supply and fixing GI pipe medium grade of 40 mm with all fittings complete on walls/floor etc complete all as specified and direcetd. |
| 105 | Excavation in trenches in soft/loose soil not exceeding 1.5 metre deep and not exceeding 1.5 metre width and getting out including forming bottom surface to required slope/gradient forlaying cables/protection pipes etccomplete all as specified and directed by Engineer-in-Charge including removing cable covers carefully & stacking properly for re-use all as directed.Note : Excavation shall be made carefully in order to avoid damage of existing cable and protection cover. |
| 106 | Returning, filling in,including spreading, levelling, watering and well ramming in layers of25 cm thickafter the cables etc. are laid, jointed & tested complete all as specified and directed. |
| 107 | Removal of surplus excavated spoil not exceeding 50 metre distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 metre above the starting point complete all as specified. |
| 108 | Supply and Fix Gun metal gate valve of size 40 mm dia, with iron wheel heads , screwed both ends for iron pipe and fixed. |
| 109 | Supply and fix Gun metal gate valve of size 20 mm dia, with iron wheel heads , screwed both ends for iron pipe and fixed. |
| 110 | M&L for Cutting existing pipe line for alterations or additions necessarily done in position without taking down and insertingTee of 80x80 x 40mm for tapping all as specified and directed. |
| 111 | M&L for valve chamber of internal size 750x750x750mm comprising of 50mm thick PCC 1:5:10 type E2 foundation, 200mm thick brick wall in CM 1:6, 15mm thick plastering in CM 1:4 internally and externally up to 50mm be;ow GL,100mm thick PCC 1:3:6 type B1 as in copings,3mm thick MS sheet cover with suitable hinges and locking arrangement, painting steel surfaces with two coats of synthetic enamel paint over a coat of primerincluding necessary earth work and excavation in any type of soil complete all as directed. |
| 112 | Taking down copper/aluminium point wiring (light, fan, socket or power ) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. |
| 113 | M&L for Point Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit 20mm dia,and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 114 | M&L for point wiring independent with 1.5 sqmm multi stranded PVC insulated unsheathed copper conductor cable (FRLS) in and including PVC Concealed conduit 20 mm dia formodular switch socket 5 Ampsofsuitable size module including PVC insulated unsheathed 1.5 sqmm copper conductor continuous earth wire and connecting withearth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specificationcomplete all as specified and directed |
| 115 | All as per srl item No 114 here-in-before for 5 Amp three pin socket outlet but in same board |
| 116 | M&L for Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit 20mm dia, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 117 | M&L for point wiring with 2.5 sqmm multi stranded PVC insulated unsheathed copper conductor cable (FRLS)in and including PVC concealed conduit ISI marked 20 mm dia for 3 pin 15 ampmodulesocket outlet independent controlled by one swich including PVC insulated unsheathed 2.5 sqmm copper conductor continuous earth wire and connectingwith earthdollyincluding necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specifications complete all as specified and directed |
| 118 | S&F in replacementof Modular switch 1 Way 6 Amp , 1 ModuleAC 230 volt complete all as specified and as directed. |
| 119 | S&F in replacement of Modular Bell push 6 Amp 1 ModuleAC 230 Volts. |
| 120 | S&F in replacement of door bell , AC 230V ding dong single phase complete all as specified |
| 121 | S&F in replacementof Modular switch 2 Way 6 Amp , 1 ModuleAC 230 volt complete all as specified and as directed. |
| 122 | S&F in replacementofModular switch 1 Way 16 Amp , 1 ModuleAC 230 volt complete all as specified and as directed. |
| 123 | S&F in replacementofModular socket , 6 A - 2/3 pin combined , 2 ModuleAC 230 volt complete all as specified and as directed. |
| 124 | S&F in replacement ofModular socket , 6 A/16 Amp - 5/6 pin combined , 2 ModuleAC 230 volt complete all as specified and as directed. |
| 125 | S&F Modular GI box alongwith modular base & cover plate for modular switches in recess etc. for 2 module (75mmx75mm) complete all as specified and as directed. |
| 126 | S&F Modular GI box alongwith modular base & cover plate for modular switches in recess etc. for 3 module (100mmx75mm) complete all as specified and as directed. |
| 127 | S&F Modular GI box alongwith modular base & cover plate for modular switches in recess etc. for 4 module (125mmx75mm)complete all as specified and as directed. |
| 128 | S&FModular metal flush box alongwith white cover plate with frame but 8module (125mmx125mm) complete all as specified and as directed. |
| 129 | S&F in replacement of ceiling rose 65 x 50mm 3 terminal AC 230 volt complete all as specified and directed |
| 130 | Supplying and fixing two module modular stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 131 | S&F surface and wall mounted 20Watt LEDtube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driverinput voltage AC 230 V, 50 HZcomplete all as specified and directed. |
| 132 | S&F energy saving decorative wall mounting LED Lighting fixtures as mirror light made out of poly corbonate with high output diffuser, 2 feet , 10 watt LED and making connections complete all as specified and directed by Engineer in charge. |
| 133 | S&F Decorativerecess mounted 36 watt LED lumaire , full output luminaire for modern offices with CRCA powder coated body and new generation high effciency diffuser to provide soft glare free lightcomplete with driver,holders & LED Lamps suitable for 600 x 600 mm modular Armstrong/Grid ceiling complete all as specified. |
| 134 | S&F recessed mounted LED downlighter 9 W with pressure die cast aluminium heat sink, & PC diffuser in white powder coated finish with integrated driver complete all as specified. |
| 135 | Providing and fixing 125Arating and breaking capacity 16 KA 3 pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 136 | S&F in replacement ofMCB TPN63Amps 10 KA, \"C\" seriesall as specified and directed. |
| 137 | S&F in replacement ofMCB TPN40 Amps 10 KA, \"C\" seriesall as specified and directed. |
| 138 | S&F in replacement ofMCB SPN 32 Amps 10 KA, \"C\" seriesall as specified and directed. |
| 139 | S&Fin replacement ofMCB SP 6 to 32 Amps 10 KA , \"C\" series all as specified and directed. |
| 140 | S&F in replacementof sheet metal enclosures single phase industrial box single pole and neutralwith two pin earth plug and socketwith plug top includingsingle poleMCB 20 Amps, 230V, 50 Hz \"C\" series complete all as specified and directed. |
| 141 | S&F in replacementof sheet metal enclosures single phase industrial box double pole and neutralwith two pin earth plug and socketwith plug top includingdoublepoleMCB 32 Amps, 230V, 50 Hz \"C\" series complete all as specified and directed. |
| 142 | Supplying and fixing 32 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A \"C\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 143 | Supplying and fixing ofsurface mounting, vertical type, 415 Volt, TPN 8 way MCCB distribution board doble door (MCCB as incomer) of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCCBsas required . |
| 144 | S&F in replacement of sheet metal enclosures for DBs when MCB to used TPN 8 way double door powder coated factory made IP 43 protection, IP 09 and provision of four pole, MCB/isolator/RCCB as incommer and SP/DP MCBs as outgoing fixed on wall/metal board/ wooden board complete all as specified and as directed. |
| 145 | S&F in replacement of sheet metal enclosures for DBs when MCB to used TPN 4 way double door powder coated factory made IP 43 protection, IP 09 and provision of four pole, MCB/isolator/RCCB as incommer and SP/DP MCBs as outgoing fixed on wall/metal board/ wooden board complete all as specified and as directed. |
| 146 | Supplying and fixing 8 way, single pole and neutral, sheet steel, MCB distribution board double door, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. |
| 147 | M&L for Sub main wiring with two single core PVCinsulated cable (FRLS)2 X 6 sq. mm + 1 X 6 sq. mm earth wire (Nominal dia) copper conductor multistrand and drawing in and includingPVC concealed conduit ISI marked 32 mm dia, 6 sqmm multistrand copper conductor PVC green unsheathed cable for earth continuity including necessary cutting and chasing complete all as specified and directed. (V TPN to SPN DB)Note : 3 run of 6 Sqmm wire and one run of PVC conduit shall be measured as one unit. |
| 148 | M&L for Sub main wiring with four single core PVCinsulated cable (FRLS) 4x16 sqmm + 2 X 6 sq. mm earth wire (Nominal dia) copper conductor multistrand and drawing in and includingPVC concealed conduit ISI marked 32 mm dia, 6 sqmm multistrand copper conductor PVC green unsheathed cable for earth continuity including necessary cutting and chasing complete all as specified and directed. (V TPN to TPN DB)Note : 4 run of 16 Sqmm wire and 2 run of 6 Sqmm wire and one run of PVC conduit shall be measured as one unit. |
| 149 | M&L for Sub main wiringwith two single core PVCinsulated cable (FRLS) 2x4 sqmm (Nominal dia) copper conductor multistrand and drawing in and including S&F PVC concealed conduit ISI marked, 1x4 sqmm multistrand copper conductor PVC green unsheathed cable for earth continuity complete all as specified and directed. (for single phase industrial socket box)Note : 3 run of 4 Sqmm wire and one run of PVC conduit shall be measured as one unit. |
| 150 | M&L for earthing with galvanized steel earth plate electrode60cm x 60cm x 6mm thick buried directly in ground not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized iron strip 25mm X 5mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel as shown in electrical plate No 3 of MES schedule Pt I of2009 connected to earthing test point all as specified including testing on completion. |
| 151 | M&L for providing & fixing/laying of 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 152 | S & F installation , testing and commissioningpressure die-cast aluminiumhousing with high power LED bldg security light fitting with IP-66 , 1x 25 Watt , fixed in position with existing 40 mm dia light grade GI Pipeduly painted MS FI 40 x6mm clamps with nut and bolts , washers making electrical connection with and including three core 16/0.20 mm copper conductor flexible cable from connector to fitting complete all as specified and directed. |
| 153 | Supply and fixing PVC conduit 20mm dia, ISI marked for telephone cable |
| 154 | Taking down DBs/industrial socket with MCBs all as directed by Engineer-in-Charge. |
| 155 | Taking down Submain wiring of any size all as directed by Engineer-in-Charge. |
| 156 | Taking down ceiling fan/exhaust fan of any size/sweep complete all as directed by Engineer-in-Charge. |
| 157 | Hanging only ceiling fanand connecting up including provision of cable from ceiling rose or connector to fan complete all as directed by Engineer-in-Charge. |
| 158 | Hanging only exhaust and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed by Engineer-in-Charge. |
| 159 | Taking Out old unserviceable electric panel of any size including electric connections and Supply, installation, Commissioning and testing LT panel board of size 1800 x 1200 x 300mm (Approx) for 3 phase, 4 wire, 415 Volts, AC, 50 Hz supply, Outdoor cubical type, dust and vermin proof, pedestal mounting type suitable for Outdoor applications having suitable shape/ size canopy on top, made out of 3.15 mm thick MS sheet with using 40mm x 40mm x 5mm angle iron frame and supports, duly finished with powder coated of approved colour over a coat of red oxide primer all over steel surfaces complete with separate compartment of suitable shape and size with shutter and locking arrangement for each switchgear and including PCC work for fixing panel legs 45 cm above ground level and bus bar of copper conductor suitable shape and size of 950 Amps rating including taking out end connections of the existing cablesand fixing the cable with the panelusing new lugs and glands of suitable size includingfollowing switchgear & controls. |
| 160 | (i) Incoming:-(a) MCCB, 630 Amps, 4 pole, 415 Volts, AC supply,having breaking capacity Icu = 35/36 KA, with adjustable load setting - 01 No (Incomer)(b) Ammeter three phase, digital electronic type, size of 96 mm X 96mm, rating of 0 – 950 Amps,and in built selector switchand 3 current transformer of suitable ratio and capacity -1 No.(c) Indicating lamps LED typefor three phases - Qty 1 set of 3 Nos (RYB).(d) Voltmeter, three phase, (0-500V) range digital electronic type with in built selector switch - 1 No.(ii) Out going:- (a) MCCB, 125 Amps, 3 pole, 415 Volts, AC supply,having breaking capacity Icu = 25 KA- 06 Nos. (01 spare) (b) Spare compartment for MCCB -01 No |
| 161 | Supply, laying, jointing and testing XLPE/ P.V.C insulated, armoured, heavy duty, aluminium conductor cable 1100 volts grade of any description and any make laid in trenches/ducts, floors, fixed to walls etc size of 70 sqmm 3.5 core complete all as specified and directed |
| 162 | M & L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed .NOTE: - Punned thickness shall be measurement & paid. |
| 163 | Supplying & Laying Sub Class `B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection all as specified and directed |
| 164 | M & L for earthingcomplete with galvanized steel earth plate electrode60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate . Earth plate surrounded by 15 cm thick packed layers of charcoal dust and common saltupto 1.5 meter depth all around the earth plate and connected to earth lead of GI strip 32x6 mmby means of bolts, nuts, check nuts and washers of galvanised iron or steel and thimbles and other end of the earth lead connected to Plant/equipment and protected by galvanized iron or steel pipe light grade and water pipe 20mm bore GI medium grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of2009 and also including making test point for testing of earthingmade out ofgun metal or phosphorous bronze size 75x75x25 mm complete. Note :On testing after completion of earthing if desired earth resistance below 5 ohms is not achieved, the earthing will be redone at no extra cost. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
