Reconstruction work of Lot No 01 Primary School Pure Garib - Earth work in exacavation by mechanical means(hydraulic exacavator/manuel means in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqmon plan),including dressing of sides and ramming of bottoms,lift up to 1.5 m,including getting out the exacavated soil and disposal of surplus exacavated soil as directed ,within a lead of 50 m,(all kind of soil)DSR sl no.2.8.1 2 P/L of cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) and curing complete i/c cost of formwork in foundation and floors.DSR sl.no 4.1.10 3 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)DSR sl.no 5.1.2 4 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)DSR sl no 5.2.2 5 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth Cement mortar 1:6 (1 cement : 6 coarse sand).DSR sl.no 6.1.2 6 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).DSR sl.no. 5.3 7 TMT Fe 500 or iron in plain work such as reinforced concrete or reinforced brick work (when not included in all over rats) wrought to required shapes as necessary including bending for proper completion of work and wastage supply of steel its wastage. As per Analysis. 8 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand).DSR sl no. 6.4.2 9 12 mm thick plaster of mix 1:6 with cement & Coarse sand of 1.25 FM fair side single and half brick.DSR sl no 13.4.2 10 Supplying and filling in plinth with sand under floor including watering ,rammimg consolidating and dressing complete.DSR sl no.2.27 11 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.DSR sl no2.25(a) 12 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.(Using M.S. angels 40x40x6 mm for diagonal braces). (DSR sl. no.10.5.1) 13 Skirting of Cement Plater 1:3 ( 1 cement and 3 course sand) finised with a floating coat of neat cement 12 mm thick plaster .DSR sl no.13.9.1 14 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR sl. No. 13.80) 15 Finishing wall with ready mix premium acrylic emulsionpaint (company depot tinted)having voc less than 50 gm/liter ; new work (two or more coat applied @ 1.43ltr/10 sqm over and including priming coat of exterior primer applied @ .9 liter/10 sqm )DSR sl.no.13.48A.1 16 Finishing wall with premium acrylic smooth exterior paint with silicon additives of required shade; new work (two or more coat applied @ 1.67ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm )DSRsl no.13.46.1 17 40 mm thitck PCC with 1:2:4 cement, coarse sand, 20mm gauge stone grit, laid over finished including S/O of all materials, labour &T&P etc. reqired for proper completion of the work. DSR sl no.11.3.1 18 S/F of Glass Strips of 4 mm thick and 40mm deep DSR item no.1149 19 Treatment of soil under existing floors using chemical emulsion @ one per hole , 300 mm apart including dreilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 course sand) to match the existing floor withchlorophriphos lindain E.C. 20% with 1% concentration . DSR sl no. 2.35.3 20 Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. 21 Same as DAR No.(1) but for5amp plug point with piano type switch and socket etc. 22 Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects. 23 S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. 24 Supply of ceiling Fan with Fan motor of AC permanent insulation capacitor rating confirmig BEE 5 star rating and IS 374/79 and also comply with IS 1709/1984 with latest amendment. The rated voltage 220/240 volts, 50 Hz, 1-ph, AC the Fan assemble should consits of down rod blades, shackle canopies etc with double ball bearing system.(i) BEE 5 star rated - 1200 mm sweep. 25 Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AAA 26 Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work.a) 600x480x200 mm. size 27 Supply and fixing of 240 volts L series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required.5 - 32 amps. 28 Supply and fixing of flush/surface mounting distribution boards complete in all respects.8 Way TPN 29 Supply and fixing of power plug with 15A/250 V flush type switch and 3 Pin 15 A/250V flush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. 30 Supply and fixing Single Pole MCBS Blanking Plate complete in all respects.
