|
| 1 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place etc. all complete but excluding GST and as per direction of Engineer-in-charge. |
| 2 | Dismantling of brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m cleaning the debrises with supply of all labour, T&P, staging, scaffolding, etc. complete with all taxes, including leads & lifts transportation & disposing at specified place etc. all complete but excluding GST and as per direction of Engineer-in-charge. |
| 3 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead. with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place etc. all complete but excluding GST and as per direction of Engineer-in-charge. |
| 4 | Dismantling 2.5cm thick grading concrete from the roof slab and cleaning the surface lowering and cleaning the debrises within 50m lead with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place etc. all complete but excluding GST and as per direction of Engineer-in-charge. |
| 5 | Dismantling and removing R.C.C. columns, beams, slab, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m with supply of all labour, T&P, staging,scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place etc. all complete but excluding GST and as per direction of Engineer-in-charge. |
| 6 | Earth work in all kind of soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth, leveling, ramming as per requirement etc. with all leads and lift, disposing the excavated material within initial lead at locations as directed, with supply of all labour, materials, T&P, hire & running charges of all machineries, all taxes etc. all complete excluding GST and as per direction of Engineer-in-charge. |
| 7 | P.C.C (1:3:6) of using 20 mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope compacting, curing, watering charges, Port entry fees including cost & supply of all materials, labour, T&P, taxes etc. all complete but excluding cost of GST and as directed by Engineer-in-charge |
| 8 | RCC 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate of 20mm to 12mm size crusher broken) of approved quality for RCC work including mixing, hoisting and laying the concrete inposition, finished smooth to the exposed surface, consolidating with vibrator where found necessary, curing, etc. all complete excluding cost of centering and shuttering and steel with supply of all materials, labour, T&P, taxes, tollage, royalties, etc. complete, excluding GST in all respect as per the direction of Engineer-in-charge. |
| 9 | Providing rigid smooth leak proof centering & shuttering made ofsteel/ply, plankof approved quality for R.C.C.structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, Port entry fees, tollage, etc. all complete but excluding GST and as directed by Engineer-in-charge. ** Foundation & Plinth |
| 10 | Brick work in Fly Ash Bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding cost of GST as per direction of Engineer-in-charge |
| 11 | 12mm thick Cement plaster with cement mortar (1:6) proportion, over brickwork including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary includingsupply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties Port entry fees etc. complete but excluding GST & as per direction of Engineer-in-charge |
| 12 | Finishing the wall surface by applying two coat of Arcylic wall putty water base of approved quality on plaster surface area including supplying cleaning, brushing, removing the flakes and finishing smooth the wall surface with sand papering & including supply of all material, labours, T&P scaffoldings, taxes, Port entry fees etc. all complete but excluding cost of GST and as directed by the Engineer in charge. |
| 13 | Painting two coat with acrylic base plastic emulsion paint of approved quality shade including scraping, cleaning, washing the old paint with scraper filling the holes with plaster of paris preparing the surface by sand papering, applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, Port entry fees etc. all complete but excluding cost of GST and as per direction of Engineer-in-charge. |
| 14 | Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding etc. all complete but excluding cost of GST and as directed by the Engineer-in-charge. |
| 15 | Supply of Fe-500 steel confirming to I.S. Specifications including cutting, straightening, bending, binding & placing the grills in position for RCC works including cost of binding wire of 18 to 20mm gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, Port entry fees, testing charges of steel, excluding GST etc. all complete as per direction of Engineer-in-charge.N.B: Payment shall be made as per the co-efficient laid down in IS-1786. No wastages shall be paid. |
| 16 | 40mm. (av) thick graded cement concrete in C.C.(1:2:4) using 12mm. to 6mm. size hard granite chips of approved quality including cleaning the roof top, washing, mixing, hoisting laying to proper level slope, gradient making rounding hunching at the corners, joints, finished smooth to exposed surface over 2 coats of WPC as water proofing course with cost and supply of all materials, labour, T&P, taxes, tollage transportations, staging, scaffolding, curing, Port entry fees etc. all complete but excluding cost of GST and as per direction of Engineer-in-charge. |
| 17 | Providing fitting and fixing the fabricted MS structures after cutting, bending, making holes, jointing ,welding as per requirement and Hoistingfabricated structurals, placing in positionas per the drawings or as directed with supply of labour and material,machinery, cost of fuel, electrode, gas, consumables hire and running charges of all kind of equipments, taxes, tollages, Port entry fees etc all complete but excluding GST and as per direction of Engineer-in-charge. |
| 18 | Preparing the structural member surfaceby scrapping cleaning the rusts and spray painting the same with two coats of coaltar epoxy paint over a coat of inorganic zinc silicate primer of approved quality,etc.complete including all staging, scaffolding upto 4.60mtr,labour,all axes,tollage materials, fuel, brushes tools, Port entry fees etc. all complete but excluding GST and as directed by the Engineer-incharge. |
| 19 | Supplying, fitting, fixing of precoated Galvalume metal sheet of any approved make of 0.5mm thick of approved quality including fixing of all EPDM screw, ridge piece, eve board fixing of windities with L.I.J hooks, water proof washer,cutting the sheets to proper profile with supply of all materials, labour, T&P, staging, transportation, scaffolding, taxes, Port entry fees etc. all complete excluding GST and as per direction of Engineer in charge. |
| 20 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P, Port entry fees etc. all complete in all respect excluding GST and as directed by the Engineer-incharge. |
| 21 | Providing and applying of 3 mm thick A.P.P water proofing membrance black finished reinforced with non-woven polyster mat consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacturer of density at 25 gegree centigrade, 0.87-0.89 kg/litre and viscosity 70-160 cps over the primer coat the layer of membrane shall be laid using butan torch and sealing all joints etc. and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be under joint strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150degree centigrade. Cold flexibility shall be up to 2 degree centigrade when tested in accordance with ASTM, D-5147 including of 100 mm lapping after making the surface free from loose particles, oil, grease, fungus or any other contaminates and painting two coats of aluminium paint over the membrane including cost and supply of all materials, labour, T&P, taxes, Port entry fees etc. all complete but excluding GST and as per the direction of Engineer-In-Charge. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. |
| 22 | Providing, fitting, fixing up false ceiling of approved design and drawing in all floors with G.I Section on 4 walls to be fixed by means of steel screw and PVC plug and the G.l. grid 2’-0”x2’-0” to be suspended from ceiling by using 12.5mm thick Fire Line Gypsum Board including cost of all materials, all labour, T&P, Port entry fees etc. all complete but excluding GST and as per the direction of the Engineer-in-charge. |
| 23 | Providing fitting, fixing of Al. door with anodized Al. door section No.9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and size of the aluminium section is 125 mm x 37 mm x 1.50 mm and 12mm thick pre-laminated board top & bottom Pannel fixed door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including providing rubber beading, aluminum U channels, angle, clips, required nos. of handles, tower bolts, hooks, mortise lock & hydraulic door stopper as per relevant I.S. specification, etc. all finished including cost & supply of all materials, labour, T&P, taxes, transportation charges, staging, scaffolding, Port entry fees etc. all complete but excluding GST and as per direction of Engineer-in-charge. |
| 24 | Supplying, fitting, fixing up AL window (sliding type) made up aluminum Section 9778 as window fram, section No.4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including cost of materials, all taxes, labour, T&P, Port entry fees etc. all complete but excluding GST and as per direction of Engineer-in-charge. |
| 25 | Supplying fitting fixing of 20 mm thick granite 0.10 SQM TO 0.40 Sqm (premimum Quality) as approved by EIC in floors ,treads or steps and landing on 12mm thick bed of cement mortar 1:3 (1cement : 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and wax polishing complete including supply of all labour, material, taxes, tollage, Port entry fees etc all complete but excluding GST and as per direction of Engineer in charge. |
| 26 | Supplying fitting fixing of Vitrified floor tiles (premimum Quality 600 x 600 mm size) in floors, treads or steps and landing on 12mm thick bed of cement mortar 1:3 (1cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour, material, taxes, tollage, Port entry fees etc. all complete but excluding GST and as per direction of Engineer in charge. |
| 27 | Supplying fitting fixing of 6.5mm to 6.7mm thick ceramic wall tiles (premimum Quality 200 x 300 mm or 200 x 200 mm size) as approved by EIC in floors, treads or steps and landing on 12mm thick bed of cement mortar 1:3 (1cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour, material, taxes, tollage, Port entry fees etc. all complete but excluding GST and as per direction of Engineer in charge. |
| 28 | Engagement of unskilled labourers for sweeping & cleaning,cutting of grass,treeming of treesand disposing the debrises away from the site with all lead and lift etc. with supply of all required equipment, T&P, Port entry fees etc. all complete but excluding GST and as directed by Engineer-in-charge. |
| 29 | Engagement of Tractor for cleaning of over burden earth shifting heavy concrete blocks,broken concrete structure,debrises andfor clearing the area or for any other purpose including Port entry fees, hire & running charges, fuel, lubricants, T&P, all taxes, operation expenses etc. all complete excluding GST and as per direction of Engineer in charge.NB: No idle hours shall be paid. |
| 30 | Supplying, fitting, fixing of factory made single leaf rigid F.R.P composite door shutter of 32mm thick, laminated with to G.R.P skins with wood grain finished, fabricated using UV stabilized Isopthalic gal coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopathalic, polyster resin with frame of size 75mm x 100 mm including fitting of all fixtures like hinges, tower bolt, handle, aldrop etc. with cost, conveyance and taxes, all material, Port entry fees etc. all complete but excluding GST and as per direction of Engineer in charge. |
| 31 | Supplying, fitting, fixing of following Chlorinated PVC pipes of approved make conforming to IS-15778 & NSF standard & fittings of approved quality for water supply & sanitary works with supply all labours, materials, T&P, transportation, staging, scaffolding excluding cost of GST etc. all complete as per direction of Engineer-In-Charge. |
| 32 | 20 mm dia pipe |
| 33 | 20 mm dia. Elbow 900 |
| 34 | 20 mm dia. Tee |
| 35 | 20 mm dia. Pass over bend |
| 36 | 20mm x 15mm brass Elbow 900 |
| 37 | 20mm x 15mm brass FPT Tee |
| 38 | 15 mm plug |
| 39 | 50mm CPVC Tank adopter |
| 40 | 20mm transition bushing |
| 41 | 32mm PVC metal strap |
| 42 | 50mm PVC metal strap |
| 43 | Supplying, fitting and fixing of following Un plasticized PVC pipes & fittings of approved make conforming to schedule-80 standard of ASTMD-1785 and fittings of ASTMD-2467 for water supply & sanitary works with supply all labour, material, T&P, transportation, staging, scaffolding, Port entry fees etc. all complete but excluding GST and as per the direction of Engineer in charge. |
| 44 | 50mm dia pipe |
| 45 | 32mm dia pipe |
| 46 | 25mm dia pipe |
| 47 | 50mm PVC Tee-soc |
| 48 | 50mm PVC Utility ball valve |
| 49 | 50mm PVC coupling socket |
| 50 | 50mm x 32mm reducer bushing |
| 51 | 50mm PVC 900 Elbowsocket |
| 52 | 32mm PVC coupling |
| 53 | 32mm PVC utility ball valve |
| 54 | 32mm PVC union socket |
| 55 | 32mm PVC 900 Elbowsocket |
| 56 | 32mm x 25mm reducer bushing |
| 57 | 25 mm PVC 900 Elbowsocket |
| 58 | 25mm x 20mm reducer bushing |
| 59 | 25 mm pvc union socket |
| 60 | Supplying, fitting and fixing of following PVC grey pipes of type-B schedule confirming to IS-13592 and fittings confirming to IS-14735 for water supply & sanitary works with supply of all labour materials, T&P, transportation, taxes, staging, scaffolding, Port entry fees etc. all complete but excluding cost of GST and as per direction of Engineer-in-charge. |
| 61 | 110mm PVC pipe |
| 62 | 75mm PVC Grey pipe |
| 63 | 110mm PVC Gully trap |
| 64 | Supplying, fitting and fixing the following sanitary, CP and porcelain fittings of approved make with all accessories etc. with supply of all labour materials, T&P, transportation, taxes, staging, scaffolding, Port entry fees etc. all complete but excluding cost of GST and as per direction of Engineer-in-charge. |
| 65 | Commode Size -580 mm x 440 mm Vitrious china Colour -White |
| 66 | Low level Cistern 5 ltr Capacity |
| 67 | CP Two-in-one wall mixture 12 mm dia |
| 68 | CP Two way bibcock with Wall flange 12 mm dia |
| 69 | CP health faucet with 8mm dia 1.00 m long flexible tube with PRV |
| 70 | CP overhead shower 200x200mm square shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system. |
| 71 | CP angular stop cock15 mm |
| 72 | CP waste coupling 32mm size half thread with 80mm height |
| 73 | CP glass shelf 600mm long |
| 74 | CP soap dish holder chrome wall mounted of Standard Size |
| 75 | 600mmx450mmx5mm thick fancy glass mirror with 100% silver back with anti crack film |
| 76 | CP floor grating of size 125mm |
| 77 | Wash basin of size 530mmx425mm (white) vitrious china |
| 78 | Urinal 340mmx410mmx265mm Vitrious China |
| 79 | 32mm PVC waste pipe 600 mm length |
| 80 | 25 to 40mm CP extension nipple |
| 81 | 12 to 25mm CP extension nipple |
| 82 | 600 mm long hot water connection pipe |
| 83 | Conceal stop cock 15 mm dia(DSR 18.55.3) |
| 84 | porcelain sink (24\"x18\"x10\") |
| 85 | porcelain squatting urinal (600x355) |
| 86 | Supplying, fitting, fixing 2000 Ltrs capacity sintex PVC triple layer water tank (white) of approved quality, with supply of all labour materials, T&P, transportation, staging, scaffolding, Port entry fees etc. all complete but excluding GST and as per direction of Engineer-in-charge. |
