|
| 1 | Geological Investigation charges for selecting the new point inculding cost of all charges etc., complete as per standard specifications (L.R) |
| 2 | Drilling of borewells of size 4\" to 5\" dia. in sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes etc., including collection of samples as directed by the Departmental Officers (S.No.c (I) DRILLING WORKS - TWAD 22-23) |
| 3 | Supply and delivery of 7\" 6 KSC PVC Pipe including cost and conveyance etc., complete as per standard specifications (S.No.1.1 (III A)- TWAD 22-23) |
| 4 | Supply and delivery of 2 HP Submersible motor pumpset in single phase as per IS 8034 without panel board for 20 Lpm x 100m Head including all material charges and labour charges etc., complete as per TWAD specifications. (S.No.2.0 (7) (III B)- TWAD 22-23) |
| 5 | Erection of 2HP Submersible motor pumpset in single phase as per IS 8034 without panel board for 20 LPm x 90 m Head including all material charges and labour charges etc., complete as per TWAD Specifications.(S.No.17.0 (c-i) PLUMBING- TWAD 22-23) |
| 6 | Supply and delivery of 4.00 sq.mm PVC insulated and sheathed 3 Core Flat type Copper Cable conforming to IS 694/1990 including all cost of material and labour charges etc., complete as per standard specifications (S.No.12.1 (3) (III A) - TWAD 22-23) |
| 7 | Supply and Delivery of 25mm \"U\" PVC pipe with ISI Mark includingall cost of all material charges and all labour charges etc., complete as per standard specifications. (S.No.1.3 (1) (III A) - TWAD 22-23) |
| 8 | Supply and fixing of 2.00 HP single phase Panel Board for ISI make in good quality including cost of all material charges and labour charges etc., complete as per Specifications.(S.No.11.0 (3) (III A) - TWAD 22-23) |
| 9 | Supply and delivery and fixing of 1000 Litres capacity HDPEtank as per IS 12701 / 1996including loading,unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., complete as per standard specifications. (S.No.17.0 (1)- TWAD 22-23) |
| 10 | Supplying laying and jointing of 25 mm dia GIpipe B Classof approved quality and best variety conforming to I.S.S & with I.S.I mark including cost of all material charges and labour charges etc., complete as per Specifications. (M-0437 PWD SoR 2023-24) |
| 11 | Supply delivery and fixing of GI & PVC Borewell Specials including cost of all materials etc.,complete |
| 12 | Bore cover plate (L.R) |
| 13 | 25 mm GI Flange set (L.R) |
| 14 | Collar set (Top and Bottom) (L.R) |
| 15 | 25 mm MS Clamp set (L.R) |
| 16 | 1\" GI bend |
| 17 | 1\" GI Tee |
| 18 | 1\" GI Coupling |
| 19 | 1\" PVC Elbow |
| 20 | 1\" PVC Ball Valve |
| 21 | Nylon Rope |
| 22 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 23 | 25 mm Dia |
| 24 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 25 | Coupler |
| 26 | 25 mm Dia |
| 27 | Elbow |
| 28 | 25 mm Dia |
| 29 | Bend |
| 30 | 25 mm Dia |
| 31 | Tee |
| 32 | 25 mm Dia |
| 33 | End Cap |
| 34 | 25 mm Dia |
| 35 | Reducer |
| 36 | 20 mm x 15 mm |
| 37 | 25 mm x 20 mm |
| 38 | Reducer Tee |
| 39 | 20 mm x 15 mm |
| 40 | 25 mm x 20 mm |
| 41 | Reducer Elbow |
| 42 | 20 mm x 15 mm |
| 43 | 25 mm x 20 mm |
| 44 | PVC Screw Down Tap Heavy Type |
| 45 | 20 mm Dia |
| 46 | Fabrication ,Supply and Fixing of Weld Mesh Screen using\"L\" Angle alround of size 40x40xx5mm vertically and horizontally welded with \"L\" Angle Frame and fully covered with Weld mesh of size 7.5x2.5mm including cost and conveyance of all material and labour charges as per standard specifications. |
| 47 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 48 | Supply and Fixing of Weighing Machine 2000kg Capacity including cost of all materials and labour charges etc, complete. |
| 49 | Supplying and fixing in position best approved of BIS quality PVC Waste waterpipes having a pressure of 6 kg. / sq.cm including cost of special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \"U\" clamp at the centre of the pipe line in addition to those for more than 6.0 meter pipe length, etc., complete complying with standard specification. |
| 50 | Painting two coats forwith approvedPlastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 51 | White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. |
| 52 | Paintingwith Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 53 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good for PVC Open light point / Fan point (For Electronic regulator) etc, complete as per standard specifications. SD 22 |
| 54 | Supply and fixing of single box type 4\"36 W flu fitting complete with Electronic ballast and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting etc, complete as per standard specificationsSD 87 |
| 55 | Supply and fixing of 1200mm sweep ceiling fan including all material such as starter, Capacitor etc., with all labour charges etc., complete as per standard specifications |
| 56 | Wiring with 2 x 4sqmm (56 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for Open PVC power plug point.SD 41 |
| 57 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification. |
| 58 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\" X 43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 59 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 60 | Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges. |
| 61 | Supplying and fixing in position P.V.C. specials such as plain bend, door bend, plain tee, door tee, offsets,Y-junction, plain or with door of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the P.V.C, soil stacks, dismadling the brick masonry or R.C.C.floor or Roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications. |
| 62 | 32mm dia PVC Elbow |
| 63 | 32mm dia PVC Tee |
| 64 | 32mm dia PVC Cowl |
| 65 | Supply and Delivery of Wheel barow (two wheel) MS steel body including of all cost of materials and labour charges etc., complete |
| 66 | Supply Delivery and fixing of Electrical fly Catching machine (UV green) including of all cost of materials and labour charges etc., complete |
| 67 | Supply and Delivery of manual sewer with MS angel frame with standard net including of all cost of materials and labour charges etc., complete |
| 68 | Fabricating supplying and fixing of roof with Poly carbonate sheet of 6mm thcik with any colour or any other approved design and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 69 | Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 70 | GST 18% |
