|
| 1 | Dismantling the existing Brick work in Cement Mortar and stacking neatly at site including the cost of all materials, labour, lead, lift, T&P etc complete. |
| 2 | Earth work excavation in hard gravelly soil.Stiff black cotton soil, hard red earth, shales, Murram, gravel, stoney earth mixed with small sized boulders etc., complete as per standard specification. |
| 3 | Plain cement concrete in CC 1:3 :6 using 40mm HBG metal, including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete. |
| 4 | Random rubble masonry in C.M.1:6 for foundation and basement including cost of materials, lead, lifts, labour and curing charges etc., complete. |
| 5 | Brickwork in CM 1:5, using class II chamber burnt bricks of size 230x110x70mm including cost of all materials, lead, lift, labour charges etc., complete. |
| 6 | Supplying and fillingM sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officersin layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification |
| 7 | RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal for concrete workswith centering, shuttering form work including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement. |
| 8 | Providing steel reinforcement for RCC works including cost of steel rod binding wire and placing in postion of the steel reinforcement all materials, lead and lift etc., complete. |
| 9 | Plastering 1:5, 12 mm thick on both sides ofbrick wall after electrical piping work including the cost of all material, scaffolding charges, cement, labour charges, scafolding charges, all leads, lifts, as per standard specification. |
| 10 | Colour washing two coats with oil bound distemper over existing colour washing including scrapping, cost of materials , lead, lift, labour etc., complete |
| 11 | Supply and fixing of colour coated roofing sheet including fabrication, angles, bolt and nuts and materials with all accessories, lead, lift, etc., complete. |
| 12 | Supplying and laying of vitrifiedfloor tiles (Marbonite) of approved ISI mark of best quality & colour laid in CM 1:3, 12mm thick and pointing with white cement using 0.40kg/m2 including finishing the joint and pointing flush with tiles surface, including cost of cement, all materials, labour, curing, all leads and lifts etc., complete as per standard specification. |
| 13 | Supplying and fixing in position of PVC door shutter made ofSingle Panel laminated Plastic section of size 200 x 20 mm and PVC extraced shutter frame of size 24 x 60 mm including cost of 3 nos 85 mm butt hinges for single leaf door of size 0.80 x 2.00 m with 2 No aluminium handle and 2 nos 150 x 2 mm aluminium towel bolt hinges etc., complete. |
| 14 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter |
| 15 | Supplying andfixing of wash basin of size550x400mm with all accessories such as castiron bracket,32mm dia CP waste coupling, rupper plug and chain,32mm dia Bclass CI waste pipe, GM wheel valve, nylon connection,15mm dia brass nipple, 15mm dia CP pillar tap etc. including cost of all accessories , transportation , labour, leads, lifts fixing,etc, complete |
| 16 | Supplying and fixing in position15mm.diameter brass / C.P screw down tap / pillar tap / swan neck tap (heavy duty)of approved make conforming to I.S.specifications andquality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary (Taps should be got approved by the executive Engineer before use on the work.(per Ino.) - Pillar Tap |
| 17 | Brass Chrom Screw Down Tap |
| 18 | Supplying and fixing of PVC pipes of approved quality and of reputed make suitable to resist a water pressure of 10 kg / sq.cm. To proper alignment and grade excluding cost ofSpecials, valves, tap, etc., including labour for fixing thespecials in pipe line and cost of materials like shelloc, thread, cutting, threading of pipes. 40 mm dia |
| 19 | 25 mm dia |
| 20 | 20 mm dia |
| 21 | SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only |
| 22 | CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only |
| 23 | Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as \"0\" only |
