|
| 1 | Construction of Chowkidar Hut |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excuated earth within a lead of 50 meters- All Kinds of Soils |
| 3 | P/L, of dry stone solingduly hand packed with ramming, dressing, watering and compacting all inclusive leads, lifts, loading, un-loading,cost and carriage of material involved complete. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. |
| 7 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns etc. for mass concrete. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platforms. |
| 10 | 12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)including leads, lifts, loading, unloading all complete including cost of scaffoldings. |
| 11 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 12 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick |
| 13 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 15 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 16 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 17 | Providing and fixing of 0.5mm thick colour coated Hi-rib G.S profile sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( upto any pitch in horizontal/ Vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required including hips, ridges, valleys all complete. |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)Second class kail wood |
| 19 | Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, all complete as per direction of Engineer-in-charge. Imported KD wood. |
| 20 | Providing and fixing of Aluminium Hardware fittings of approved brand and manufacture with necessary fittings/ fixtures complete. Tower Bolt100 mm |
| 21 | Tower Bolt150 mm |
| 22 | Handle 100 mm |
| 23 | Eye Hooks125mm |
| 24 | L-Drop 8\" withlocking arrangement 200mm long( Godrej or equivalent brand) |
| 25 | L-Drop withlock( Link/ Godrej or equivalent brand) |
| 26 | Providing and fixing 12 mm thick plyboards toceilingsincludings providing and fixing of wooden jambs (budloo wood ) as base frameworkincluding cost of nails, adhesives etc complete job including all carriages involved . |
| 27 | Providing and fixing 19 mm thick plyboards toSoffitsincludings including cost of nails, adhesives etc scaffoldings charges etcincluding all carriages involved complete . |
| 28 | Proving and fixing of 4mm thick Float Glass panes including necessary beading and nails adhesives required etc all complete |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | Providing and fixing 1st quality ceramic glazed floor tiles (antiskid) conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 31 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 32 | Providing and fixingwire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge(imported KD wood). |
| 33 | Providing and fixing of PVC Pipes and PVC fittings of following nominal dia to PVC soil/ waste/ ventilated pipes complete. PVC Pipe 100mm |
| 34 | Floor Trap 100mm dia |
| 35 | Door T 100mm dia |
| 36 | Collar 100 mm |
| 37 | Bends 100 mm |
| 38 | Ruducer (100 mm x50mm) |
| 39 | T 100mm |
| 40 | 75mm dia PVC pipe |
| 41 | Floor Trap 75mm dia |
| 42 | Door T 75mm dia |
| 43 | Collar 75mm |
| 44 | Bends75mm |
| 45 | Tee 75mm |
| 46 | Providing and fixing of C.I manhole covers of size (450 x450mm)with frame of approved quality and make (Light Weight) |
| 47 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 48 | Providing and fixing of 15mm dia GI pipes ISI markedwith all necessaryfitting fixtures Complete.(mediumm Type). Complete with GI fittings and clamps, including trenching and refilling complete.15mm Dia Nominal bore |
| 49 | Providing and fixing of CP fittings/ other allied fittingsof approved quality and brand with fixtures Pattern and design to be approved by Engineer incharge.Angle Value (Jaquar/ Cera or Equivalent Brand) |
| 50 | Long Nose Bib Cock(Jaquar/ Cera or Equivalent Brand) |
| 51 | Bib Cock Brass (Jaquar/ Cera or Equivalent Brand) |
| 52 | Wall Mixer with Telephonic Shower(Jaquar/ Cera or Equivalent Brand) |
| 53 | Providing and fixing of stainless steel sink of approved brand and make (Pattern and design to approved by Engineer Incharge |
| 54 | CP gratings of 100mm dia. |
| 55 | Towel Rod |
| 56 | Towel Ring |
| 57 | Mirror of approved qualityand make complete |
| 58 | soap dish holder of approved quality and make complete |
| 59 | soap dispenser of approved quality and make complete |
| 60 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 61 | Providing and fixing P.V.C low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White |
| 62 | Providing and fixing of PVC waste pipe of approved quality and make complete. |
| 63 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete20 mm nominal bore |
| 64 | Providing and fixing of Exhaust Fan, including wiring, fixtures and other accessories as required complete (Khaitan/ Havels or equivalent) |
| 65 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm |
| 66 | Providing and fixing of Sink Mixer of approved brand and manufacture. (Jaquar/ Cera or equivalent brand). |
| 67 | Providing and fixing of Wall Mixer of approved brand and manufacture. (Jaquar/ Cera or equivalent brand). |
| 68 | P/F of 50litrewater heater geyser of approved make like jacquar, jupiton, Racold or equivalent make including all necessary fittings complete. |
| 69 | Construction of brick masonary man hole in cement mortar cement concrete 1:2:4 mix, foundation concrete 4” thick 1:4:8, inside plastering 12mm thick in cement mortar 1:3, 50mm thick cement concrete flooring with floating coat of required neat cement fixed with CI frame and coverwith frame of reqiured size all inclusive leads, lifts, loading, unloading cost & carriage of all materials involved complete (inner size of manhole 600x600x450mm deep). |
| 70 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 71 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 72 | Dry random rubble masonry with hard stone in foundation and plinth:Without bond stone |
| 73 | Carriage of materials Sandfrom approved source for and average lead of 10Kms by MT. |
| 74 | Carriage of materials Stone aggregatefrom approved source for and average lead of 5Kms by MT. |
| 75 | Carriage ofBricks from approved source for and average lead of 40Kms by MT. |
| 76 | Carriage ofR/R stonesfrom approved source for and average lead of 10Kms by MT. |
| 77 | providing, fixing and laying of kitchen counter complete job involving brick work, 12mm cement plaster, RCC slab of M20(1:1.5:3) 20mm nomial size crushed aggregate & steel reinforcement for the same with TMT bars of grade Fe-500d or higher @100kg/cum, granite work for the counter exterior & providing & fixing of wooden boxing/aluminium boxing including hardware all complete. |
| 78 | Brick Lining to Earthen Brooder Pond |
| 79 | Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively ) Wet |
| 80 | Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively )Dry |
| 81 | Weed clearanceFrom canals(including extraction of roots) |
| 82 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil : |
| 83 | Supply & laying of good earth free free from foreign material like khak bajri, tree roots, pebbles etc breaking clods, banking in layers not exceeding 20 cm in depth rolling each layer with hand roller toobtain desired compaction, shaping of dykes to the required grade of 1V :2H on wet side including all sorts of carriage & royality of material involved complete as per the directions of EIC at site. |
| 84 | Labour charges for laying of good earth (material available at site) including consolidation as required etc all complete including (Headload if any) involved. |
| 85 | P/L, of dry stone solingduly hand packed with ramming, dressing, watering and compacting all inclusive leads, lifts, loading, un-loading,cost and carriage of material involved complete. |
| 86 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 87 | Brick on edge flooring in required pattern with common burnt clay nonmodular bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar and curing complete 1:4 ( 1cement : 4 coarse sand) Half Brick Work |
| 88 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 89 | Carriage of materials Sandfrom approved source for and average lead of 10Kms by MT. |
| 90 | Carriage of materials Stone aggregatefrom approved source for and average lead of 5Kms by MT. |
| 91 | Carriage ofBricks from approved source for and average lead of 40Kms by MT. |
| 92 | Providing & fixing of following DI/ GI fittings with ISI marks items of approved brand and manufacture incl. all fittings/fixtures complete. DI Pipe 80 mm class K-9 Double flanged (screwed) |
| 93 | DI Double flanged Bend 90 degree |
| 94 | Ball valve 80 mm Dia(Brass) |
| 95 | Gate valve 80 mm Dia(CI) |
| 96 | GI union 80 mm NB |
| 97 | Upgradation of Existing Chinese Carp hatchery BWO P/F GI Fitting to Carp Hatchery and allied works. |
| 98 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 99 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 100 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .Ordinary cement without any pigment. |
| 101 | 40mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight inproportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry and curing complete :White cement without any pigment. |
| 102 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 103 | Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms. |
| 104 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 105 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 106 | providing & fixing ACP sheets ( 4 mm thick ) of standard quality with ISI mark including making of door shutter of aluminium hallow sections as at site all necessary screws etc complete. |
| 107 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 108 | Providing and fixing of CI/GI pipes ISI marked (B-Type) with all fitting fixtures Complete.CI Sluice Valve 80 mm (class II ) |
| 109 | CI Sluice Valve 100 mm (class II ) |
| 110 | CI Sluice Valve 125 mm (class II ) |
| 111 | Gi pipe 25 mmincluding all fittings requried |
| 112 | Gi pipe 15 mm including all fittings requried |
| 113 | Gi pipe 40 mm including all fittings requried |
| 114 | Ball Valve 40 mm Dia |
| 115 | Gate Valve 40 mm Dia |
| 116 | GI Union 40 mm NB |
| 117 | GI Union 25 mm NB |
| 118 | GI Nipples 1/2\" X 1/6\" |
| 119 | GI Nipples 3\" X 2\"6\" |
| 120 | GI Nipples 3\" X 4\" |
| 121 | GI Nipples 3\" X 1\"6\" |
| 122 | GI Nipples 3\" X 1\"0\" |
| 123 | GI Nipples 1/2\" X 0\"6\" |
| 124 | GI Nipples 1/2\" X 0\"3\" |
| 125 | SS Grating 100 mm |
| 126 | CP Brass shower rose 20 mm inlet, 100 mm dia |
| 127 | Engagement of skilled labour for repairing the existing sluice valves to make them fit for work at site. Plumber |
| 128 | Engagement of skilled labour for repairing the existing sluice valves to make them fit for work at site. Skilled labour |
| 129 | Carriage of Materials from apporved source to site of work complete :-Carriage of sand for an average lead of 10Kms |
| 130 | Stone agg for an average lead of 5 Kms |
