|
| 1 | Repair to Kitchen roof with removal of tree roots in Type I & II Qtrs. Estate area at OCFS. |
| 2 | Demolation of Mud phuska roofs in kitchen, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) |
| 3 | Apply brushing neat cement slurry 3.0kg/sm of cement in floor |
| 4 | Providing 40 mm Cement concretetype B-1, 1:2:4 (20mm graded aggregate) finishing cement concrete surface even .Finishing cement concrete surface even and smooth with using extra cement. |
| 5 | S&F of Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples |
| 6 | Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m |
| 7 | M&L brick work with sub class \"A\"bricksstraight or curved on planexc. 6mmean radius built in1:4 mix cement mortarusing 100%coarsesand. |
| 8 | Providing cement concrete 70 mm thick type B-1 1:2:4 (20 mm graded aggregate) in base of over head tank, flooring includingfinishingcement concrete surface even. |
| 9 | Taking down old damaged cement plaster on brick walls including raking out joints,hacking for key, serubbing down with water etc. |
| 10 | Rendering 12mm cement plaster of 1:4 mix cement mortar including preparation of new plastered surface than apply two coats of colour wash on wall.M&L complete. |
| 11 | Taking down & refixing of existing tanks exc 250 & not exc 500 ltr., setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) |
| 12 | Providing cement concrete type B-1 1:2:4 (20 mm graded aggregate) in roof kerbs, rounded or chamfered on edges. |
| 13 | Refixing of 15mm or 20mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) |
| 14 | Cutting existing 15 mm steel tubing for alterations or additions (Each cut measured) |
| 15 | Cutting existing 20 mm steel tubing for alterations or additions (Each cut measured) |
| 16 | Providing 20 mm dia stop valves, cast copper alloy, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed |
| 17 | Providing 15 mm dia stop valves, cast copper alloy, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed |
| 18 | Cutting holes into or through brick walls built in but in brick walls built, in cement mortar or cement lime mortar and stone walls built in cement mortar 1:3 or cement concrete 1:2:4 type B-l (Superficial area not exc 150 sqCM ) |
| 19 | Cutting holes into or through brick walls built in brick walls, in cement mortar or cement lime mortar and stone walls in cement mortar 1:3 or cement concrete 1:2:4 type B-l (superficale area 150 sqCM but n exc 400sq CM) |
| 20 | Pre-cast cement concrete block Type B1 1:2:4 (20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in 1:4 mortar, complete |
| 21 | S/F ofMild steel TMTbars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 22 | S&F PVC(SWR) pipe single socketed in any length with rubber ring joints, fixed to walls110mm bore with necessary sealing compound to be used. |
| 23 | S&F of bends PVC (SWR) 110mm bore. |
| 24 | S&F of M.S. Clamp for support for rain water pipe fixed with pvc plug & screw. |
| 25 | Preparation of new plastered surfaces & apply two coats of colour wash on undecorated surfaces to match . |
| 26 | Removing building materials to a distance of 500 M or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination |
