Tender For Renovation Of One Bathroom And Kitchen, Aluminium Work In Room Windows And Other Necessary Repair Work In Laplas Colony Stith House No. A-1001 Type-5., 1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10mm to 25mm.15.23.1 2 Dismentaling doors,windows and celerestory window (steel or wood) shutter including Chowkhats,architrave,holdfast etc.complete and stacking within 50 meters lead:of Area 3 Sqm and below.15.12.1 3 Providing and fixing 1st quality ceramic glazed walls tiles conferming to IS:15622 (thickness to be specified by the manufacturer ) of approved make, in all colours shade except burgundy , bottel green , black of any size as approved by engineer -in -charge , in skirting risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand ) and jointing with grey cement slurry @ 3.3 Kg per sqm including pointiong in white cement mixed with pigment of matching shade complete (DAR-8.31) 4 Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DAR-11.40) 5 Providing and fixing 20mm dia Chlorinated polyvinyl chloride (cpvc)pipes having thermal stability for hot & cold water supplyincluding the supply with clamps at 1.0m spacing.This includes jinting of pipe and fitting with one stepsolvent cement and testing of joints complete as per direction of Engineer-in-charge-exposed on wall(18.7.2). 6 Providing and fixing 25mm dia Chlorinated polyvinyl chloride (cpvc)pipes having thermal stability for hot & cold water supplyincluding the supply with clamps at 1.0m spacing.This includes jinting of pipe and fitting with one stepsolvent cement and testing of joints complete as per direction of Engineer-in-charge-exposed on wall(18.7.3). 7 Providing and fixing 15 mm nominal bore C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (18.53.1). 8 Providing and fixing PTMT Soap Dish holder having length of 138 mm , breadth102 mm , height of 75 mm with concealed filling arrangement , weighing not less than 106 gms (18.65) 9 Providing and fixing of glass shelf 7/32 thick 600x130 mm size with C.P. Guard Rail of standard size and bracket with 40mm long screws,rawl plugs etc,complete. 10 Providing and fixing CP Brass towel rail 450x20 mm together with pair of CP brass brackets fixed to wooden cleats with C.P brass screws with concealed fittings arrangement of approved quality and colors weighing not less than 80gms. 11 Providing and fixing CP Brass towel ring (jaquarESSCO/cera/ hindware) fixed with plastic sleeves Cpscrewsetc.required for proper completion of work. 12 Providing and fixing 15mm nominal bore C.P. Brass stop cock (concealed) of standard design and of approved make conforming to IS 8931 (18.52.1). 13 Providing & fixing C.P. wall mixture 15mm dia with 115mm long bend pipe for connection to overhead shower (with bush &piston divertor fitting) Aerotor (L&K,Jaquar ESSCO,Cera,Hindware) including supply of all material,labour,T&P etc,required for proper completion of the work. 14 Providing and fixing C.P. brass shower rose with 15 or 20mm inlet : 100 mm diameter.(18.22.1). 15 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (17.31). 16 Providing and fixing 15 mm nominal bore C.P Brass bib cock of approved quality conforming to IS:8931.(18.49.1). 17 Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standard and weighing not less than 810 gms.(18.50.1). 18 Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillor taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous china Wash basin Size-630x450 mm with a Pair 15 mm C.P. brass pillar taps. (17.7.1) 19 Providing and fixing PVC low level flushing cistern 10 litre capacity white with manually controlled device (handle lever) Conforming to IS : 7231with all fittings and fixtures complete. (17.18.1). 20 Providing and fixing white Vitreous china Pedestal type (European type/wash down type) water closet pan. (17.15). 21 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen Sink as per IS : 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm. (17.10.1.1). 22 Providing and Fixing 18 mm thick gang saw cut, Mirror Polished, Premoulded and Prepolished, Machine cut for Kitchen Platform, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thickbase Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any Colour and shad Area of Slab over 0.50 sqm. (DAR-8.2.2.1). 23 Providing and Fxing Kitchen cup board 30cm depth 19mm thick century ply ISI marked superior quality and both side laminated 1mm thick texture Sunmica superior quality fixing with glue and nails etc and fixing of Stainless steel fitings as handles,hinges etc. Complete work as per direction of Engineer in Charge. 24 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminum sections shall be smooth, rust free straight mitred and jointed mechanically wherver required including cleat angle, Aluminium snap beading for glazing/paneling C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Enginner-in-charge (Glazing paneling and dash fasteners to be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron). (DAR No- 21.1.2.2) 25 Providing and Fixing of glazing in Aluminium door/ window, Ventilator shutter and Partitions etc. with EPDM Rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium Snap beading shall be paid in basic item). with Float glass panes of 5 mm thickness. (weight not less than 12.50 kg/sqm) DAR-21.3.2,(Rs-903) 26 Supply and fixing Alluminium window fitting as sliding bolt, tower bolt, handle, stopperetc complete as per direction fo Engineer in charge. ( Based on Actual Requirment ). 27 FILLING the gap in between allmunium frame and adjacent RCC/Brick/stone work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete complying to ASTM C920, DIN 18540-F & ISO 11600. Upto 10mm depth and 10mm width item no 21.19.2
