Tender For Construction Of 11 Kv Line From Existing 33/11 Kv Sub Station Raibojha For Ee, Construction Division, Ayodhy-03 Awash Vikas Parisad, Gonda & Second Stage (Kaluwadeeh) Proposed 2X5 Mva & Third Stage (Patna) 1X5 Mva &Against Deposit Scheme On Tu, bahraich-Uttar Pradesh

Construction of 11 KV Line From Existing 33/11 KV Sub Station Raibojha For EE, Construction Division, Ayodhy-03 Awash Vikas Parisad, Gonda & Second Stage (Kaluwadeeh) Proposed 2x5 MVA & Third Stage (Patna) 1x5 MVA &against Deposit Scheme on Turn Key Basis under Electricity Distribution Division-II, Bahraich (Nanpara); 1 All Materials Provided by the Contractor as per Resspo NormsPART-A (Supply) 2 PCC Pole 8.5 Mtr long 3 ST Pole 11 Mtr. Long 4 11/0.4 KV 630 KVA T/F 5 Stone Pad 6 11 KV V Type Steel X-Arm 7 11 KV Pin Insulator with Pin 8 11 KV Disc Insulator with Fitting 9 11 KV Disc Insulator 70 KN 10 11 KV Disc Fitting 70 KN 11 ACSR Weasel Conductor 12 ACSR Dog Conductor 13 Stay Set Complete 14 Earthing Complete 15 GI Barbed Wire 16 Top Channel 17 AB Cable 3x95+1x70+1x25mm2 18 Croos Braching Angle 19 11 KV Cable Jointing Kit O/D 20 11 KV Cable Jointing Kit I/D 21 Alluminium Binding Wire 22 Alluminium Paint 23 Red Oxide Paint 24 Earth Wire Clamp 25 Alluminium Tape 26 11 KV XLPE Cable 3x120sqmm 27 PG Clamp for Dog 28 11 KV Fuse Set 29 Structure Fuse Set 30 Structure line & Bus Isolator 31 Structure for Post Isolator 32 Structure for LA 33 Main Bus Bar with Structure 34 Clamp for Top, Tee Drop, Guard etc 35 V-Type X-Arm Holding Clamp 36 Danger Board, No-Plate Bolt with 37 F-Bracket Clamp 38 PP Clamp 39 Number Plate 40 Terminal Gantry 41 Line & Bus Bar Isolator 42 Post Insulator 43 Lightening Arrestor 11 KV 44 Distribution Box 45 MS Nut & Bolt with washer 46 PART-B (Erection Work) 47 Fabrication & Erection of Single PCC Pole (8.5 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit sitewith complete fitting. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms). 48 Fabrication & Erection of Single ST Pole (11 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit sitewith complete fitting. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms). 49 Fabrication & Erection of Double PCC Pole (8.5 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit sitewith complete fitting. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms). 50 Fabrication & Erection of Double ST Pole (11 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms. 51 Grouting of Poles with 1:4:8 CC ratio of cement, sand & brick ballast, backfilling of pits with mud completely. (All the materials for fabrication shall be arranged by the contractor as per RESPO Norms). 52 Supply, Grouting nozzling & binding of stay sets with stay clamp complete fittings. (All the materials for fabrication shall be arranged by the contractor as per RESPO Norms). 53 Earthing Complete at 11/0.4 KV T/F as per RESSPO Norms. 54 Earthing Complete at HT/LT Pole as per RESSPO Norms. 55 Boring Type Earthing Complete as per RESSPO Norms. 56 Laying ofDouble circuit 11 KV 3x120sqmm XLPE Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Interaxial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks with Complete Fitting. 57 Errection & Commissioning of AB cable 3x95+1x70+1x25mm2 including complete fitting of Accessories (All Accessories shall be Provided by the Contractor). 58 Laying, stringing, sagging, binding & jumpering of conductors of 11 KV in 3 phase, 4 wire guard wire the help of necessory clamp and binding wire proper connector & Clamp (Complete Fitting.) 59 Laying, stringing, sagging, binding & jumpering of conductors of 33 KV in 3 phase, 4 wire guard wire the help of necessory clamp and binding wire proper connector & Clamp (Complete Fitting.) 60 Fixing of Cable Jointing kit O/D 61 Fixing of Cable Jointing kit I/D 62 High Pressure testing of 11 KV XLPE cable, Testing equipment will be arranged by the contractor. 63 Fixing of 11 KV Fuse Set Complete as per Resspo Norms. 64 Insllation of Terminal Gantry as Per Assign Attached. 65 Cartage & Fixing of 11 KV VCB 200/100/5Amp 66 Fixing & Installation of Structure for 11 KV Fuse Set as per Resspo Norms. 67 Fixing & Installation of Main Bus Bar Complete with Structure 68 Fixing & Installation of Structure for line & Bus Isolator 69 Fixing & Installation of Structure for Post Insulator 70 Fixing & Installation of Structure for LA 71 Fixing of Lightening Arrestor for 11 KV Line 72 Construction of masonary Plinth suitable for 630 KVA & 100 KVA T/F as per Respo Norms. 73 Wire Mesh Fencing suitable for 100 KVA T/F as per Resspo Norms. 74 Wire Mesh Fencing for Covering of 11/0.4 KV Switchyard including 3x630 KVA T/F and all Accessories as per Resspo Norms. 75 Fixing of Line & Bus Isolator 76 Fixing of Post Insulator 77 Fixing of Number Plate 78 Fixing of Alluminium Binding Wire 79 Alluminium Painting work (ISI Mark Paint) 80 Red Oxide Painting work (ISI Mark Paint) 81 Fixing of Earth Wire Clamp 82 Fixing of PG Clamp for Dog 83 Fixing of Alluminium Tape 84 Mounting & Jumpring of 630 KVA T/F with complete fitting. 85 Carriage & Mounting & Jumpring of 100 KVA T/F with complete fitting. 86 Cutting of Tree Branches 87 Fitting of Three Phase Distribution Box

INR 3540 /-

INR 98 Lakhs /-