Tender For Maintenance Of Water Supply (Two Year Annual Maintenance And Repairing Of Vt Motor And Other Allied Electrical Work At Renny Well No.-7 And 08) Noida., 1 Rewinding Of 100 Hp, 1440 Rpm Vt Motor & Booster Motor (Centrifugal Motor) Kirloskaer Ma, noida-Uttar Pradesh

Tender For Maintenance Of water supply (Two Year Annual Maintenance And Repairing Of Vt Motor And Other Allied Electrical Work At Renny Well No.-7 And 08) Noida., 1 Rewinding of 100 HP, 1440 RPM VT Motor & Booster Motor (Centrifugal Motor) Kirloskaer make / Equivalent make as per original winding 415 volt with super enamelled copper wire as required gauge complete all respect as per direction of Engineer incharge. It is also include the dismentling / Refixing / Catage from site to workshop / factory and vice versa. The old material will the property of contractor (Old material rate already deducted in AOR) 2 S/F Thrust bearing No. 29324 SKF/N.B.C. make or as per sample approved by the E/I. 3 S/F ball bearing No. 6316 SKF/N.B.C. make or as per sample approved by the E/I. 4 S/F rachit plate with Goli as per requirement of VT motor at site as per direction of E/I. 5 S/F motor coupling and key size 25mm bore as per existing size of shaft. 6 S/F of 11 KV TPMO Relco/Rama make 9 nos. insulator of Jai shree/BHEL make complete in all respects as per direction ofE/I. 7 S/F of out door type 11 KV fuse set Ralco/Rama make with insulator Jai shree/BHEL make complete in all respects as per direction ofE/I. 8 Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. 9 Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. 10 Supply and Fixing of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 60 to 72 watt. Confirming to IP 66 protection complete in all respects. 11 S/F of steel tubular pole 7.50 Mtrs. Designated 410 SP-5 in 1:3:6 cement concrete foundation i/c excavation back filling complete in all respects. 12 Rewinding & repairing of 400 KVA Transformer Kirlosker make / Equivalent make as per original winding 11/.433 K.Volt with super enameled copper wire as required gauge complete all respect as per direction of Engineer in Charge. It it also include the dismantling / Refixing/Cartage from site to workshop / factory and vice versa. The old material will the property of contractor (Old material rate already deducted in AOR) 13 S/F Fress Transformer Oil as per latest specifications of Savita Make 14 Supply and burying of 600 x 600 x 6mm Copper plate vertically for earthing with its top at least 3 m below ground level complete with 20mm GI pipe and funnel for watering and one earthing lead of One no. 8 to 10 SWG Copper wire in 15 mm dia GI pipe up to switch board (from appron to switch board the cost of GI pipe and Copper wire will be extra) 30cm. square C.I. frame with hinged cover masonary housing alternate layers of charcoal/coak and salt at least 150mm thick alround etc. as per directions of E/I complete in all respects. 15 Supply & laying 35mm x 6mm G.I. strip from earth electrode directly in the ground as required complete in all respect 16 S/F of 3 Pole Power Contactor AC3 70 Amp. (MAKE- L&T / SIEMENS / SCHNIEDER) 17 S/F of 3 Pole Power Contactor AC3 80 Amp. (MAKE- L&T / SIEMENS / SCHNIEDER) 18 S/F of 3 Pole Power Contactor AC3 95 Amp. (MAKE- L&T / SIEMENS / SCHNIEDER) 19 S/F of 3 Pole Power Contactor AC3 110 Amp. (MAKE- L&T / SIEMENS / SCHNIEDER) 20 S/F 250 Amp. 3 Pole MCCB TM Type, 36 KA (Make L&T C-Power / D-Sine) / Siemens (3WL /VL) / Schnieder (Masterpact / NSX) 21 S/F 200 Amp. 3 Pole MCCB TM Type, 36 KA (Make L&T C-Power / D-Sine) / Siemens (3WL /VL) / Schnieder (Masterpact / NSX) 22 S/F 160 Amp. 3 Pole MCCB TM Type, 36 KA (Make L&T C-Power / D-Sine) / Siemens (3WL /VL) / Schnieder (Masterpact / NSX) 23 S/F 125 Amp. 3 Pole MCCB TM Type, 36 KA (Make L&T C-Power / D-Sine) / Siemens (3WL /VL) / Schnieder (Masterpact / NSX) 24 Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc....120 sq. mm 3 core 25 S/L of aluminium conductor PVC insulated armoured served, sheathed cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by Engineer-Inchargecomplete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 25.01) 50 sqmm 3½ core 26 70 sqmm 3½ core 27 400 sqmm 3½ core 28 S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tap and making connection etc. complete in all respect as per direction of E/I. 26.01) 25 Sqmm 29 35 Sqmm 30 50 Sqmm 31 70 Sqmm 32 120 Sqmm 33 400 Sqmm 34 S/F overhead line with ACSR conductor RABBIT/RECON category one poles/service bracket i/c bindng etc. complete in all respects.

INR 2124 /-

INR 59200.0 /-

INR 29.59 Lakhs /-