|
| 1 | Excavating in trenchesnot exceeding 1.5m wide and n.exceeding 1.5m in depth; for foundation etcand similar work and gating out in hard/dense soil all as specifed and as directed. |
| 2 | Excavating in post holes( or similar holes ) each n. exc 0.5 cumin soft /loose soil getting out, returning filling in and ramming around in layers not exceeding 25 cmcomplete all as specifed and as directed. |
| 3 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete all as specifed and as directed. |
| 4 | Removing excavated soil to a distanceexc 50m and n.exc1.50 km out side defence land complete all as specifed and as directed. |
| 5 | Taking down cement plaster of any descreption on brick/stone walls or concrete surfaces including racking out joints, hacking for key scrubbing down with water etc on walls and ceiling, complete all as specified and as directed. |
| 6 | Taking down chowkats or frameswith shutters(without taking offshutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and as directed. |
| 7 | Description all as per item No 06 above but area exceeding 1.50 square metre and not exceeding 4 square metre each complete all as specified and as directed. |
| 8 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed. |
| 9 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed |
| 10 | M & L Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement complete all as specifed and as directed. |
| 11 | M & L Rendering 10 mm thick on brick or concrete surfaces of walls in CM (1:6) including finishing the surfaces fair and even without using extra cement all as directed |
| 12 | M&L for 75mm thick PCC 1:3:6, type C-2by using 40 mm graded stone aggregate as in sub base floor complete all as specified and as directed. |
| 13 | M&L for 50 mm thick PCC 1:4:8, type D-2by using 40 mm graded stone aggregate as in sub base floor complete all as specifed and as directed. |
| 14 | M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundation complete all as specifed and as directed. |
| 15 | M & L for PCC 1:2:4 Type B2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specifed and as directed. |
| 16 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specifed and as directed. |
| 17 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 18 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 19 | M&L forpreparation of new wall surfaces and applying two coat of cement base paintover one coat primer. complete all as specified and directed. |
| 20 | M & L for applying 1 mm thick layer of wall putty on walls to give uniform surface, surface scrubed with emery paper and make surface good and clean complete all as specified and directed. |
| 21 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new or old surfaces complete all as specified and as directed. |
| 22 | M&L for two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified and as directed. |
| 23 | M & L Vitrifiedtiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified. |
| 24 | M & L Vitrifiedtiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in CM 1:4 complete all as specifed and as directed. |
| 25 | M&L for Dura stone heavy duty vitrified tiles of size not exc 0.36 Sqm of 10-12mm thick as in floors set and jointed in neat cement slurry and pointed in white cement to match the surface including screed bed in CM 1:6 complete all as specifed and as directed. |
| 26 | S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame complete all as specified and directed. |
| 27 | 10-12 mm thick gypsum boards seemess false ceiling including sunk or raised moulding or cop design as approved, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rawel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface complete all as specified and directed.Note : (a) Design of ceiling board as approved by Engr-in-Charge. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer complete all as specifed and as directed. |
| 28 | Supply and fixing factory made uPVC white/coloured Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.Comprising of uPVC multi-chambered frame, sash and mullion (where everrequired) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately). |
| 29 | Supply and fixing factory made uPVC white/coloured Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. Comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 30 | S&F 5mm toughned glass (etching desgin on glass as approved by Engr in Charge) as in hinged doors, partitions, windows,doors and similar work including cutting to shape, drilling holes required including all connected accessoried etc complete all as specified and as directed. |
| 31 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and as directed. |
| 32 | Venetian blinds vertical roller type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as rolling type or chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed. |
| 33 | S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specifed and as directed. |
| 34 | S & F Pre-painted galvatume aluminum zinc coating GI vased corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specifed and as directed. |
| 35 | S & F Pre-painted galvatume aluminum zinc coating GI vased Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specifed and as directed. |
| 36 | M & L hand rails, half round or other stock section or core for wooden hand-rail straight portion drilled and countersunk for balusters running bars, for doors, balusters,nosingtosteps includingembeddinginconcrete and screwing etc. wind ties for roofincluding securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc complete all as specified and as directed. |
| 37 | S&F rolled mild steel Fe-410w (Gde-E-250) quality \"B\" Roof trusses (framed ), trussed, purlins, crane gantries , rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specifed and as directed. |
| 38 | S & F MS plates (plain or chequered) channels, square cut or notched ordinary and counter sunk) with riveted, bolted or welded attachment complete all as specifed and as directed. |
| 39 | M&L for preparation of new steel surfaces of any discripton not otherwise discribed over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide on steel surfacescomplete all as specifed and as directed. |
| 40 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power/ LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as directed.Keeping the LED lights in safe custody complete all as specifed and as directed. |
| 41 | Point wiring for one light/ fan/bell point controlled by oneswitch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making samethe wall patchs after layingthe wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish. |
| 42 | All as per srl item No 41 but for 3 pin 6 Amps socket outlet independent boardincluding PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specifed and as directed. |
| 43 | All as per srl item No 41 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specifed and as directed. |
| 44 | All as per Srl item No 41 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly complete all as specifed and as directed. |
| 45 | S&F for modular switch6 Amps single pole one way230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed by Engr In charge/GE. |
| 46 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed by Engr In charge/GE. . |
| 47 | S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner covercomplete all as specified and directed by Engr In charge/GE. |
| 48 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush typewith outer/inner covercomplete all as specified and directed by Engr In charge/GE. |
| 49 | M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge/GE. |
| 50 | S & F for electronic step type fan regulator 120 watt 230 volts 50 C/S deluxe modular type complete all as spcified and directed.. |
| 51 | S&F single pole and neutral enclosure surface mounted 240 voltswith 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator ofcomplete all as specified and directed. |
| 52 | S&F in replacement 36W (2 x 2) LED Ceiling/recess lightpanel for recess mounting warm white colour which provides soft-light and glare free symmetrical illumination complete all as specifed and as directed. |
| 53 | Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box typewarm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and as directed. |
| 54 | S&F Sheet metal enclosure MCB distribution boardsingle pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link,fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.(Note-MCBs will be measured separately) |
| 55 | S & F in replacement MCBsingle pole 240 volt any rating from 10 to 40 amps \"C\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable . |
| 56 | S & F in replacement MCBsingle poleand neutral 240 volt any rating from 63 Amps \"C\"series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specifed and as directed. |
| 57 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2X6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable6 Sq mm as earth lead all as specified. Including taking down old sub main wire complete all as specifed and as directed. |
| 58 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2X1.5 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable1.00 Sq mm as earth lead all as specified. Including taking down old sub main wire complete all as specifed and as directed. |
