|
| 1 | 2nd class brick work using common burnt clay building bricks in super structureabove plinthlevel upto floor two level in cement mortar 1:6 (One cement : Sixsand) within all leads and lifts. |
| 2 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battons and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4.00mtrs. and removal of the same for in-situ-reinforced and plain concrete work in:- |
| 3 | Flat surfaces such as soffits of suspended floor, roofs, landings and the like floor etc. upto 20mm thickness within all leads and lifts. |
| 4 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pilasters, buttresses, plinth & string courses etc.and the like. |
| 5 | Providing and laying cement concrete 1:1.5:3 (One cement:one & half sand:three graded stone aggregate 20mm nominal size)and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-. |
| 6 | Suspended floor, roofs landing and shelves and their supports balconies beams girders bressumers and cantilevers upto floor two level within all leads and lifts. |
| 7 | Lintel, beam, girders, bressumers and cantilevers upto floor two level within all leads and lifts. |
| 8 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level within all leads and lifts . |
| 9 | Providing and fixing pressed steel doors/windows frame manufacture from commercial mild steel sheet of 1.25mm thickness including hinges jamb, beed and if required angle threshold of mild steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means adjustable lugs with split and tail including steel but hings 2.5mm thick with guards lock strike plate and shock as specified and applying a coat of approved steel primer afterpretreatment of the surface within all leads and lifts. |
| 10 | Profile -B |
| 11 | Providing and fixing anodised aluminium work for Door, windows, ventilators and Partations with extruded built up standard tubuler and other section of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868 ( Minimum anodic coatring of grade AC 15) fixed with rawl plug and secrews or with fixing clips, or with expension hold fasterner i/c necessary filling up of gaps at junctions, at top boottam and sides with required PVC /neoprene felt etc. aluminium sections shall be smooth rust free, straight, mitred and jointed mechanically where ever required i/c cleat angle aluminium, screws, snap, beading for glazing/panelling C.P. brass/ stainless steel all complete within all leads and lifts . ( For shutters of doors, windows, ventilators etc.) |
| 12 | Providing and fixing anodised aluminium work for Door, windows, ventilators and Partations with extruded built up standard tubuler and other section of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868 ( Minimum anodic coatring of grade AC 15) fixed with rawl plug and secrews or with fixing clips, or with expension hold fasterner i/c necessary filling up of gaps at junctions, at top boottam and sides with required PVC /neoprene felt etc. aluminium sections shall be smooth rust free, straight, mitred and jointed mechanically where ever required i/c cleat angle aluminium, screws, snap, beading for ( For wire gauge shutter of alluminium wire IS gauge for doors,windows, ventilators etc.) |
| 13 | Providing and fixing glazed andpanelled glazed or panelled and glazed shutters for doors windows & clear story windows including black enamelled iron butt hinges with necessary screws 40mm thick 2nd class deodar wood with in all leads and lifts. |
| 14 | 6 mm thick cement plaster to ceiling in cement mortar 1:3(One cement :three sand) within all leads and lifts . |
| 15 | 20 mm thick cement plaster in single coat on rough side of bricks /stone masonary forinterior plastering up to floor two level including arrises, internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (One cement: Six sand) within all leads and lifts. |
| 16 | Distempering (two coat) with oil bound washable distemper of approved brand and manufacture and of required shade on un- decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth within all leads and lifts. |
| 17 | Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undecorated wall surface (two coats) to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered material within all leads and lifts. |
| 18 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foreign matter and sand papering and stoppingwith ready mixed paint other than white within all leads and lifts. |
| 19 | Providing and laying Duro stone vertified tiles( 300x300x10mm) in grey/coloured or of approved shade in flooring, treads of step and landing laid on bed of 12mm thick CM 1:3 in( 1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of requird shade to match the shade of tiles (Kajaria/Somany/Asian make)complete in all respect. |
| 20 | Providing and laying Duro stone vertified tiles( 300x300x8mm) in grey/coloured or of approved shade in skirting, riser of step and dado on bed of 12mm thick CM 1:3 in( 1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of requird shade to match the shade of tiles (Kajaria/Somany/Asian make)complete in all respect. |
| 21 | Provding and fixing ceramic urinal pot with sensor complete in all respect. |
| 22 | Providing and fixing ceramic EUROPEAN water closet floor mounted wastern toilet commode white oneplace EWC S trap with soft close hydraulic seat cover 28x15x28 inches complete in all respect. |
| 23 | Providing and fixing Hindware ariel pedestral wash wasin complete in all respect. |
| 24 | Providing and fixing 3 layer diplast make water tank 1000 Ltr cap complete in all respect. |
