|
| 1 | Plain Cement Concrete of mix 1 : 4 : 8 (One pat of Cement four part of sand eightpart ofaggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII |
| 2 | Cement Concrete 1:2:4 (One cementTwosand andfourhard brocken stone) using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed. |
| 3 | Plastering with CM 1:5(One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materialsto work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:56&57 |
| 4 | A) Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc.complete. |
| 5 | Finishing with top of roof with one course of machine pressed tiles of size 20cmx20cmx2cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same water proofing compound mixed with cement motar ,red oxide, etc.complete complying with standard specification as directed by the departmental officers.- 10 m2TNBP No:44-I |
| 6 | N) Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specificationsfor 10 sqm |
| 7 | SupplyingandFixingin position best approvedof BIS quality P.V.C RainWaterdownfallpipe having a pressure of 4Kg / Sq.cm including cost of necessary PVC shoe,PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc, and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc, complete. The rate shall be inclusive of cast of removable cast iron grating. The PVc pipe shall be fixed in wall with special type of \"U\"clamp at the centre of the pipe line in addition to those for more than 3.00mt pipe length etc,CompleteComplyingwithStandardSpecifications. (Rain water Down wall Pipe) |
| 8 | C)Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm sizeof approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc.Complete. |
| 9 | Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications. |
| 10 | Painting one coats over the old iron work using ready mixed enamel paint including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications |
| 11 | Supply and delivery ofFollowing PVC pipes and Specials from Borewell to HDPE tanklaying below ground level and above Ground level and HDPE tank to Toilet . |
| 12 | 1000 lit HDPE tank |
| 13 | 32mm PVC.Pipe |
| 14 | 20mm PVC.Pipe |
| 15 | 32mm PVC.Elbow |
| 16 | 32mm PVC. Bend |
| 17 | 32mm PVC. TEE |
| 18 | 32mm PVC. End cap |
| 19 | 20mm PVC. Bend |
| 20 | 32mmx20mm PVC.reducerTEE |
| 21 | 20mm PVC. TEE |
| 22 | 32mm G.M. Gate Valvue |
| 23 | 20mm G.M. Gate Valvue |
| 24 | 15mm dia PVC Screw down Tap |
| 25 | 110 pvc pipe 4 ksc |
| 26 | 110 pvc Elbow |
| 27 | Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains (SD No.65) |
| 28 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). etc, complete as per standard specifications.SD 25 |
| 29 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.etc, complete as per standard specificationsSD 38 |
| 30 | Fan fittings |
| 31 | Supplyinf and Fixingof 4\" 18W Crystal Glass LED Tube Light Fitting including cost and conveyance of all materials and all labor charges etc., |
| 32 | Supplyinf and Fixingof18 Watts PL LAMP including cost and conveyance of all materials and all labor charges etc., |
| 33 | Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable1100V grade in suitable heavy gaugeMS conduit pipe on wall and ceiling with MS accessories with suitable MS box to house the control switch regulator flush with wall and covered with hylem sheet of 3mm thick with painting of suitable colour with continuousearth wire connection of 1.5 sq.mm copper wire for open conduit fan point (for rheostatic type fan regulator) |
