Procurement Of Workshop Machinery For Repair And Maintenance Work In Water Service Mechanical Division Rohtak ( Mechanical Sub Division )-- 1 Supply & erection of portable typeBS-IV for latest BS specification ( as applicable in Delhi ,NCR) DG set of capacity 62.5/63 KVAwith noise controlled devices acoustic of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415 +(-)1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over/AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover/ standard panel, making second incoming cable connection from transformer, outgoing cable connection fromchangeover / STD panel to incomer of motor starter panel, fenced enclosure withplatform for DG sets complete as per following detailed scope and specifications and directions of Engineer-in-charge.The rating should be at 1500 RPM. a) Diesel Engine b) Alternator c) Battery 24 v. d) Base Plate on wheel suitable for transportaion with tractor e) suitable sq mm suitable core copper cable upto 40 metres.f) Tools, standard panelg) Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, frequency meter, CTs) h) Metering set 60/5A/11 OV (Amp. Meter, Volt Meter)i) Overload protection for DC-1 No.j) Battery Charger 24V DCk)Copper bus bar of suitable size I) KWH meter 96 sqmm sizem) Starting fuse button and key switch on/off) n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, De control O) Control Panel of rating IP 53 and other required accessories complete in all respects 2 Supply & erection of portable typeBS-IV for latest BS specification ( as applicable in Delhi ,NCR) DG set of capacity 250 KVA with noise controlled devices acoustic of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415 +(-)1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over/AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover/ standard panel, making second incoming cable connection from transformer, outgoing cable connection fromchangeover / STD panel to incomer of motor starter panel, fenced enclosure withplatform for DG sets complete as per following detailed scope and specifications and directions of Engineer-in-charge.The rating should be at 1500 RPM. a) Diesel Engine b) Alternator c) Battery 24 v. d) Base Plate on wheel suitable for transportaion with tractor e) suitable sq mm suitable core copper cable upto 40 metres. f) Tools, standard panelg) Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, frequency meter, CTs) h) Metering set 60/5A/11 OV (Amp. Meter, Volt Meter)i) Overload protection for DC-1 No.j) Battery Charger 24V DC k)Copper bus bar of suitable size I) KWH meter 96 sqmm sizem) Starting fuse button and key switch on/off)n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, De control O) Control Panel of rating IP 53and other required accessories complete in all respects 3 630 KVA, three phase 11KV/433-250V, Oil immersed naturally cooled copper wound outdoor type distribution transformers as per latest UHBVN/DHBVN technical specifications CSC-120 with ammendments relevent ISS with latest ammendments.
