|
| 1 | Trolley Line System for Coke Pusher Car (122 Mtrs)conforming to TS with following Accessories: |
| 2 | Rails for Trolley Lines. (BSN 60RN257) |
| 3 | Trolley Holders for rails. |
| 4 | Trolley Line joints. |
| 5 | Angle for Signalling Trolley Lines. (ISA 50x50x5)mm. |
| 6 | Tufnol Insulator for Signalling. |
| 7 | Trolley Line Angle joints. |
| 8 | Steel Al. Straps for Incoming / cables |
| 9 | Trolley Line expansion joints. |
| 10 | Angle for electronic earthing (ISA 50x50x5)mm. |
| 11 | Tufnol Insulator for electronic earthing |
| 12 | Trolley Line Angle joints. |
| 13 | Trolley Line System for Coke Quenching Car / Loco (122 Mtrs) conforming to TS with following Accessories: |
| 14 | Rails for Trolley Lines. (BSN 60RN257) |
| 15 | Trolley Holders for rails. |
| 16 | Trolley Line joints. |
| 17 | Angle for Signalling Trolley Lines. (ISA 50x50x5)mm. |
| 18 | Tufnol Insulator for Signalling. |
| 19 | Trolley Line Angle joints. |
| 20 | Steel Al. Straps for Incoming / cables |
| 21 | Trolley Line expansion joints. |
| 22 | Angle for electronic earthing (ISA 50x50x5)mm. |
| 23 | Tufnol Insulator for electronic earthing |
| 24 | Trolley Line Angle joints. |
| 25 | Catenary Wire System for Coal Charging Car (115 Mtrs) conforming to TS with following Accessories: |
| 26 | Catenary Wire GI Wire Rope Steel Core of dia 12 mm |
| 27 | Power Conductor - Hard drawn Solid Round Copper Conductor of dia 12 mm |
| 28 | Sectionalizer Assembly (Complete for 4 Wire System). |
| 29 | End Termination Complete Assembly |
| 30 | Dropper Wire Assembly @ 1.5 Mtr Pitch |
| 31 | Fixed Dropper Assembly at Fixed Supports |
| 32 | Feeding Terminal |
| 33 | Splice Jointer |
| 34 | Catenary Wire System for Guide Car (120 Mtr) conforming to TS with following Accessories: |
| 35 | Catenary Wire GI Wire Rope Steel Core of dia 12 mm |
| 36 | Power Conductor - Hard drawn Solid Round Copper Conductor of dia 12 mm |
| 37 | Sectionalizer Assembly (Complete for 4 Wire System). |
| 38 | End Termination Complete Assembly. |
| 39 | Dropper Wire Assembly @ 1.5 Mtr Pitch |
| 40 | Fixed Dropper Assembly at Fixed Supports |
| 41 | Feeding Terminal |
| 42 | Splice Jointer |
| 43 | LED based Bidirectional Indication Lamp in Sheet Steel Enclosure |
| 44 | Supervisory Services during Erection Testing & Commissioning. |
| 45 | Note: - 1. BOM shall be operated on unit rate basis.2. Unit rates shall be quoted for all the above items for any additional requirements / decrease in requirements.3. Quantity mentioned above is only an approximate quantity & may undergo change during detailing & site execution.4. Unit rate shall be firm & binding till final handing over of the project.5. Payment shall be made based on actual quantity supplied & executed at site. Site certification shall be done by Engineer in charge.6. Any item not mentioned above but required to be supplied for completeness shall be supplied & paid as per the rates furnished for similar type of items mentioned above. |