|
| 1 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required and include primer paint |
| 2 | In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete |
| 3 | Providing and fixing bolts including nuts and washers complete. |
| 4 | Ply wood 7 ply, 12 mm thick |
| 5 | Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type and water proof, MR (Moisture Resistant) grade and Termite Resistant commercial plywood board of approved make. |
| 6 | Applying priming coat: |
| 7 | With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 9 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 10 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : For Fixed Portion |
| 11 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 12 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . |
| 13 | With frosted glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 14 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
