Tender For Concrete Bandhara At Kondfanasavane 1 1 Tal Chiplun Dist Ratnagiri - Item No.1:-Excavation In Soil,Soft Murum, Lime,Shaduexceeding 1.50 M.In Width Including Depositing The Material As Dieected With Lead Up To 15 M.And Liftto 1.50 M. Inclu, Ratnagiri-Maharashtra

Concrete Bandhara At Kondfanasavane 1 1 Tal Chiplun Dist Ratnagiri - Item no.1:-Excavation in soil,soft murum, lime,shaduexceeding 1.50 m.in width including depositing the material as dieected with lead up to 15 m.and liftto 1.50 m. including. 2 Item no.2:-Excavation in soft rock exceeding 1.50min widthincluding depositing the excavated naterial as directed with lead upto 15 m and lift upto 1.50m including dressing 3 Item no.3:-Excavation in hard rock exceeding 1.50m in width by blasting including depositing the excavated naterial as directed with lead upto 15 m and lift upto 1.50m includingdressing (This includes boulders of size more than 0.10 cum under other items) 4 Item no.4:-Providing and laying in situ cement concreteof grade M 15 ( Below 40 MSA ) of trap/ and bedding, compacting and curing, including Royalty of material etc. completestrength etc lifts including testing of concrete compressive with all leads and 5 Item no.5:-Providing & Cutting bending hooking laying in position and laying M S bars for reinforcement ofRCC work as per detailed drawing etc. complete. 6 Item no.6:-Constructing of embanking for Casing zone withselected material directly from borrow area including transporting the material with all leads and lifts laying in layers , watering and consolidation including royalty ofleveling ,spreading including material etc. complete.( Refilling gap of foundation ) 7 Item no.7:-Providing and fixing Road junction / Information sign board of size 1.20 m x 0.75 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective transperent coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 8 Item no.8:-Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includesall materials, Labour charges, machinery 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micronper coat per IS 14177.

INR 1000 /-

Refer document

Refer document