|
| 1 | Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame)exc 1.5 sqm but not exc 4 Sqm each complete all as specified and directed. |
| 3 | Supply and fixing Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed. |
| 4 | Supply and fixing for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed. |
| 5 | M & L for PCC 1:3:6 type C1 (20mm graded stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed. |
| 6 | Supply and fixing 2nd class HW 35mm thick plain framed, panelled shutter (two panel)with lock rail and panel of 9mm thick B.W.P. commercial ply or 12mmveneered particle board with commercial veneering on both faces. The size of rail and stileas per IS-1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 7 | Supply and fixing 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 8 | S&F in repair 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 9 | Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed. |
| 10 | Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfacescomplete all as specified and directed. |
| 11 | Supply and fixingMS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple complete all as specified and directed. |
| 12 | Supply and fixing 300mm long mild steel sliding door bolts with hasp and staple, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed,complete all as specified and directed. |
| 13 | Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed (ISI marked)complete all as specified and directed. |
| 14 | Supply and fixing mild steel pressed handles, 150 mm long, oval type, stove enamelled black (ISI marked)complete all as specified and directed. |
| 15 | Supply and fixing 4.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane complete all as specified and directed. |
| 16 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed. |
| 17 | Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome complete all as specified and directed. |
| 18 | Dismantling floor, hearth or wall tiling/terrazzo finish etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. and directed. |
| 19 | Supply and fixing Factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 20 | Material and Labour for non skidfloor tiles, colored, of size exc 0.42 sqm but n exc 1.0 sqm and 7-8 mm thick or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in CM 1:6 all as specified and directed. |
| 21 | Description all as per Ser item No 20above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4,complete all as specified and directed. |
| 22 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed. |
| 23 | Material and labourfor 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed. |
| 24 | Supply only of Liquid water proofing compound of approved makecomplete all as specified and directed. |
| 25 | Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other thenfair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 26 | Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceilingover & including 10 mm thick average dubbing and finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 27 | M & L for preparation of new plastered surafaces of wallsand applying two coats of oil bounddistemper over a coat of primer complete all as per manufacturer instructions and all as specified and directred. |
| 28 | Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation ofsurfaces, complete all as specified and directed. |
| 29 | Material and labour three coats of white wash on newly plastered surface of wall including preparation the surface of on walls complete all as specified and directed. |
| 30 | Material and labour for applying two coats of cement base paint over a coat ofprimer onnewly plastered wallsurfaces including cornices & pillasters etc as per manufacturer\"s specifications & instructions including preparation of surface, complete all as specified and directed. |
| 31 | Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed. |
| 32 | M&L brick work with sub class \"B\" old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6complete all as specified and directed. |
| 33 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removing rubbish from the site as directed complete all as directed. |
| 34 | PCC (1:3:6) type C-2 using 40mm graded aggregare 75mm thick as in plinth protection complete all as specified and directed. |
| 35 | Dismantling of wall and ceiling boards (fibre, pulp,insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets etc complete all as specified and directed. |
| 36 | S & F595x595mmx6mm thick Gypsum board laminated with PVC Sheetas in false ceiling including supply and fixing \"Tee\" grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide 1.6mm thick with flag fixed to RCC ceiling with dash fastener or wraping the suspending wire around the existing wooden/steel purlin/rafter for suslpending grid frame work of size 600mmx600mm suspended with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee and fixed to T-gridas per manufacturer direction.The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mmx24mmx0.60mm and. Perimeter angle 24mmx24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall including or wall including all as per manufacturer\"s instruction complete all as specified and directed |
| 37 | S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 38 | Taking down old unserviceable rolling shutter of any size upto 36 Sqm area incl hood cover complete with all accessories and making good disturbed surfaces with CM 1:4 complete all as specified. |
| 39 | S&F Steel rolling shutter without ball bearing as specified including top cover and 1 mm thick lath anchoring rod hasp and staple and gear operated type with bevel gear box and crank handle and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle. |
| 40 | Taking down rolling shutter of size not exceeding 10 Sqm each from any position, any location including fittings and fixtures. Repairing / Replacing of unserviceable components and re-fixing on same opening in its original positing after complete overhauling, greasing and oiling for smooth function and apply one coat of synthetic enamel paint complete all as specified and directed.Note: - Unserviceable/ parts under this item shall be measured & paid as supply only separately under appropriate items of this BOQ. |
| 41 | Supply only saftey lever locks of size 150mm mild steel with 4 levers with two keys for rolling shutters approved/best quality complete all as specified and directed |
| 42 | Supply only ball bearing for rolling shutter to match the existing complete all as specified and directed . |
| 43 | Supply only steel helical wire or flat spiral spring for rolling shutters to pull out the shutters including proper greasing for smooth movements/ function completeall as specified and directed . |
| 44 | Supply only MS pulley / wheel made with flat iron 25 x 6 mm of 160mm dia for revolving of rolling shutter in shaft completeall as specified and directed . |
| 45 | S&FSteel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including dismentalling of old mild mild steel work complete all as specified and as directed. |
| 46 | S&F Pre paintedgalvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismentalling of Plain or corrugated stee /Asbestos l sheeting, any gauge, thickness, including Nainital or similar pattern roof coveringscomplete all as specified and directed. |
| 47 | M & L in repair PCC 1:2:4 for PCC type B-1 using 20 mm graded stone aggregate as in coping steps bed blocks etc complete all as specified and directed by Engineer-in-Charge |
| 48 | M&L for J type hook of not less then 8 mm dia with bolt and washer for fixing galvalume sheet over rcc purlin complete all as specified and as directed. |
| 49 | Supply and fixingpowder coated Anodised aluminium window side hung shutter,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified and directed . |
