Tender For Annual Repair And Maintenance Of Residential And Non- Residential Buildings At Sector No. 01 And Cisf Colony For Two Years At Pipri Sonebhadra U.P., 1 Schedule-01 :Maintenance and Repair of wood work (door/window ete.) at Sector 01 Pipri-Sonebhadra (U.P.) 2 Concrete with 4cm gaugestone ballast, coarse sand (F.M. 1.8 to 2.5) & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. 3 Cement concrete with 2cm gauge approved hard stone ballast,coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work. 4 RCC work with cement, approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:2:4inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P 5 First class brick work in 1:6 cement and coarse sand(F.M.1.8 to 2.5) mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work. 6 First class brick (class-150) work in 1:6 cement and coarse sand (F.M. 1.8 to 2.5) mortar in super structure including supply of all materials, labour and T&P etc. required for proper completion of the work. 7 As in item no. 9 above but for wall of thickness half brick (115 mm) thick & 1:4 cement mortar. 8 Brick work in foundation & plinth with old dismantled Bricks (supplied by department free of cost) and coarse sand of F.M 1.5 to 2.0 mortar in 1:6 including supply of all other materials,labour,removing mortar & cleaning of old & used bricks,T&P etc completed. 9 Brick work with old or dismentled bricks in 1:6 cement and coarse sand mortar in 230 mm thick wall in super structure including cost of all material, labour and T&P etc. required for proper complition of work but excluding the cost of bricks. 10 Mild steel or iron work in heavy size such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materilas supplied by contractor. 11 TMT or TOR steel in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending as per requirement and direction of E/l for proper completion of work and including supply of steel, its wastage, labour and T&P etc. complete (bend hooks ands authorized overlapping in reinforcement shall be measured). 12 Engagement of beldar, mazdoor/ helper for non measured work such as cleaning of roof terrace, sun shed and other miscellaneous work as per direction of engineer-in-charge. 13 Engagement of plumber for non measured work in repair and maintenance work in internal /external water supply pipe line as per direction of engineer-in-charge with all T&P required (Labour rates only). 14 Engagement of carpenter for non-measured work in repair and maintenance of wood work as per direction of Engineer-in-charge with all T&P required (Labour rates only). 15 S/F welded wire mesh size 75x25 mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded asrequired including costs of drilling holes, washer welding etc as required including cost of all labour, materials and T&P required for proper completion of the work. Except cost of M.S. angle and flat. 16 Supply & laying of A.C. sheet 6 mm thick corrugated fixed in position with J or U bolts 10 mm dia withG.I. Limpet and bitumen washers including cost of all materials, labour and T&P etc. required for proper completion of work. 17 Supply and fixing ridges, valleys and gutters of AC sheets fixed with J or U bolts 10 mm dia GI limped and bitumen washers complete in including supply of all material, labour and T&P etc required for proper completion of yhe work. 18 12 mm thick plaster with cement mortar in proportion of 1:6 cement and coarse sand (F.M. 1.8 to 2.5) over brick work, minimum thickness not to be less than 10 mm including supply of all materials, labour and T&P etc. required for proper completion of work. 19 As in item No.-21 above but with cement and coarse sand of 2.5 fineness modulus mortar in 1:4. 20 12 mm thick plaster with cement mortar in proportion of 1:3 cement and coarse sand (F.M. 1.8 to 2.5) on ceiling, minimum thickness not to be less than 10 mm including supply of all materials, labour and T&P etc. required for proper completion of work. 21 3 mm thick neat cement floating coat including cost of all material labour and T&P etc required for proper completion of the work. 22 2.5 cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement and marble dust mixing ratio of 5:1 or as specified and removing over lapping of mortar at the joints of the panels if any and giving them a uniform finish without base concrete including supply of all materials, labour and T&P etc. required for proper completion of work. 23 Painting or varnishing new iron/wooden surface with one coat of ready mixed priming paint/wood primer and one coat of approved superior quality ready mix paint including cleaning, sand papering and making smooth surface and also including supply of all materials, labour and T&P etc. required for proper completion of the work. 24 Paintingone coat of superior quality synthetic enamel paint of required shade approved make on previously painted old wooden/iron surfaces including its sand papering, rubbing and cleaning, supply of all materials, labour and T&P etc. required for proper completion of the work. 25 Finishing walls with water proof cement paint of approved made like Super Snowcem or equivalent quality on new work with two coats to give an even shade including supply of all materials, labour etc. required for proper completion of the work. 26 Finishing walls with water proof cement paint of approved made like Super Snowcem or equivalent quality on previously treated surface work with one coats to give an even and required shade including supply of all materials, labour etc. required for proper completion of the work. 27 Providing one coat of Oil bond distemper of required shade over old treated surface including scraping and brooming the surface to remove all dirt, dust and other materials to give smooth surface including cost of all material, labour and T&P required for proper completion of work. 28 Dismantling brick work or stone masonry work in lime or cement mortar and including stacking of material as directed by the Engineer-in-charge within a distance of 60 meters. 29 Dismantling reinforced cement concrete of rainforced brick work including stacking of dismantled material as directed by the Engineer-in-charge within a distance of 60 meters. 30 Dismantling cement concrete or brick or granolithic floor, including base concrete and including stacking of dismantled material as directed by the Engineer-in-charge within a distance of 60 meters. 31 Dismentling of AC sheet roofing including stacking with in 100 m as per direction of Engineer-in-charge. 32 Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 meters. 33 Repair of plaster in patches including removal of old damaged surface of plaster, cleaning the same thoroughly and racking out joints to 1 cm depth, watering the area and then replastering of mix 1:4 cement sand mortar and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for completion of the work. 34 Repair to 2.5 cm (1) cement concrete floor in patches including up to 10 cm.(4) depth renewing 8 cm.(3) base concrete consisting of one part cement, 4 parts aproved coarse sand and 8 parts of 4 cm.(1.5) gauge brick ballast as in C.C.floor consisting of one part cement 2 parts approved coarse sand and 4 parts approved stone grit including supply of all materials.labour and T&P etc. required for proper completion of the work. 35 Providing and replacing of L drops 16 mm Ø x 300 mm long of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete. 36 Providing and replacing of L drops 16 mm Ø x 200 mm long of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete 37 Providing and replacing of Tower bolts 10 mm Ø x 100 mm long of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete 38 Providing and replacing of Tower bolts 10 mm Ø x 250 mm long of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete 39 Iron Hinges 100 mm size & 12 gauge thick of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete 40 Providing and replacing of M.S. Handles 100 to 150 mm size of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete 41 Providing and replacing of Iron door springof approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete 42 Providing and fixing 20 mm dia curtain rods of 1.25 mm thick chromium plated brass plate with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete. 43 Renewing panes of 4 mm thick glass/ 6mm thick ply including supply of glass with putty and brads/Wooden bead including supply of all materials, labour and T&P etc. required for proper completion of work. 44 Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T&P etc. required for proper completion of work. 45 Providing & replacing of 15 mm dia G.I. tee/socket/elbow/bend of approved quality and as per sample approved by E/I etc. for repair of pipe line including cost of all materials, labour and T&P etc. required for proper completion of work. 46 Providing & replacing of 15 mm dia G.I. union size approved make and as per sample approved by E/I etc. for repair of pipe line including cost of all materials, labour and T&P etc. required for proper completion of work. 47 Providing & fixing 15 mm dia B-class (T.T./Swastik) ISI marked G.I. Pipe complete with G.I.specials as bends, tee, sockets cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also in includes concealed G.I. fitting where required, cutting and making good the walls etc. and all material labour T&P etc. complete (internal work). 48 Providing & fixing 15 mm diaISI UPVC/CPVC pipe (as per required) complete with specials as bends, tee, sockets cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also in includes concealed G.I. fitting where required, cutting and making good the walls etc. and all material labour T&P etc. complete (internal work). 49 Providing & replacing of 15 mm dia UPVC/CPVC tee/socket/elbow/bend of approved quality and as per sample approved by E/I etc. for repair of pipe line including cost of all materials, labour and T&P etc. required for proper completion of work. 50 Providing & replacing of 15 mm dia UPVC/CPVC union size approved make and as per sample approved by E/I etc. for repair of pipe line including cost of all materials, labour and T&P etc. required for proper completion of work. 51 P/F 15 mm Ø UPVC/CPVC half turn gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of the work. 52 Supply and fixing of 15mm dia PVC float valve with brass union & rod complete ISI marked including supply of all materials, labour and T&P etc. required for proper completion of work. 53 Providing and fixing P.V.C. connection pipe 300x15 mm with 2 brass union including all materials, labour and T&P etc. required for proper completion of work. 54 Providing and fixing CP Brass Bib Cock 15 mm dia ISI mark heavy quality (200 gm) including supply of all materials, labour and T&P required for proper complition of work. 55 Providing and fixing Brass Stop Cock 15 mm dia ISI marked heavy quality including supply of all material, labour and T&P required for proper complition of work. 56 Providing and fixing CP Brass Stop Cock 15 mm dia ISI mark heavy quality (200 gm) including supply of all materials, labour and T&P required for proper complition of work. 57 P/F 15 mm Ø half turn gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of the work. 58 P/F 15 mm Ø brass wheel valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of the work. 59 Providing and fixing 15mm Dia CI/PVC bib cock including replacing of old bib cock completed. 60 Providing and fixing 15mm dia C.P. pillar cock heavy quality of approved make includingcost of all materials, labour and T&P etc. required for proper completion of work. 61 Provding and fixing Stainless Steel Grating 100 mm dia including all materials, labour cartage, T&P etc. required for proper completion of work. 62 Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour and T&P etc. required for proper completion of work. 63 Providing and fixing 450x20 mm size C.P. brass towel rail of approved quality including brackets, including supply of all materials, labour and T&P etc. required for proper completion of the work and cutting. 64 Providing and fixing of 110 mm dia. P.V.C. pipe (6 kg./sq.cm) for rain waterdown pipe with specials such as tee, bend, socket, elbow etc. including cutting of pipe wherever necessary and including all materials, labour and T&P etc. required for proper completion of the work. 65 Providing and laying SWR, 75 mm dia. PVC (Finolex or equivalent) pipe including cost of excavation, C.C. etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 66 Providing and laying SWR, 110 mm dia. PVC (Finolex or equivalent) pipe including cost of excavation, C.C. etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 67 Cleaning of existing water pipe line of different dia upto 2 dia including digging trench and refilling, opening and cleaning of pipes, cutting, threading if required fixing and including making good the road and wall etc. as directed by the Engineer-in-charge including supply of all labour and T&P etc. required for proper completion ofwork. 68 Providing & replacing white glazed earthen ware W.C. ‘Orissa’ pan of Hindware or equivalent make of (580x440) mm size of approved sample including cost of all materials, labour and T&P etc. completion of work. 69 Supply and fixing P.V.C. cistern Hindustan or equivalent make 10 litres. Capacity complte with all accessories (Low level ) including all materials, labour and T&P etc. complete. 70 Providing and fixing in position 32 mm. dia P.V.C. flush pipe B class for W.C. with brass unions, bends etc. including supply of all materials, labour and T&P etc. including cutting making good the wall and floors required for proper completion of the work. 71 Providing and fixing white glazed P or S trap including cement concrete and all materials, lablur cartage T&P etc. requuired for proper completion of the work. 72 Providing and replacing first quality European type white glazed earthem wire ISI mark W.C. pan sixe 580 mm (Hindustan, Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work. 73 Providing and fixing plastic sheet cover complete with plastic lid C.P. bras hinges and rubbers buffers for Europeans type W.C. complete including supply aof all materials, labour and T&P etc. required for proper completion of the work (For White colour). 74 Providing and fixing plain edge looking mirror 5.50mm thick glass Indian polished (Atul of equivalent make) size 600mm x 450mm as per approved sample with 6mm thick hard board sheet back fixed with PVC cleats & brass screws and washers including supply of all materials, labour and T&P etc. required for porper completion of work. 75 Providing and fixing Elliptical wash hand basin of white glazed earthenware first quality ISI marked (Hindustan, Neycer/Cera make) including supply of all materials, labour and T&P etc. complete. 76 Providing and fixing 450x300 mm wash hand basin of white glazed earthenware first quality ISI marked (Hindustan, Neycer/Cera make) including supply of all materials, labour and T&P etc. complete. 77 Providing and fixing Stainless steel sink 610x450x200 mm heavy quality ISI marked including all materials, labour, cartage T&P etc. required for proper complition of work. 78 Providing and replacing of 32 mm dia P.V.C. waste pipe for sink or wash basin. 79 Brick edging with first class brick work,8 cm wide and 12 cm deep laid with mud mortar including labour and supply of brick finished to required template and in proper alignment and also including dressing earth as directed by the Engineer incharge. 80 Excavation in foundation in soil mixed with moorum/shingle/kankar requiredthe use of special T&P such as pickaxes,sabble etc including lift upto 1.5m &lead upto 30m and including filling,watering and ramming of excavated earth into the trenches or into the space between the building & side of the foundation. 81 Supply and Laying 8 mm thickglazed floor tiles of Somany, Johnson or equivalent make, , laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and T&P etc. required for proper completion of the work. 82 Supply and Laying 6 mm thickglazed tiles in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete,including supplyof all materials, labour and T&P etc. completion required for proper completion of the work. 83 Providing and fixing flat back 465 mm.x 355 mm x 265 mm. size lipped front urinal basin of white glazed earthern ware first quality (Hindutan, Neycer make) I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work. 84 Providing and fixing CP BRASS SHOWER HEAVY QUALITY ( > 225 gms )15 mm dia. ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. 85 Providing and fixing CP BRASS Angle Valve HEAVY QUALITY 15 mm dia. ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. 86 Schedule- 02Annual Maintenance & Repair (Civil related) works of Residential and Non-Residenrial buildings for two years in CISF Colony Unit Pipri- Sonebhadra (U.P.) 87 Engagement of plumber for non measured work in repair and maintenance work of internal /external water supply pipe line as per direction of engineer-in-charge with all T&P required. (Labour rates only) 88 Engagement of beldar/ coolie/ helper for non measured work such as site clearance, cleaning of roof terrace & sun shed, uprooting of vegetations from the outer wall, to assist the plumber, dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 meters and other miscellaneous work as per direction of Engineer-in-charge. 89 Excavation in foundation in soil mixed with moorum/ shingle/ kankar requiring the use of special T&P such as pickaxes, sabbals etc including lift upto 1.5 m & lead upto 30 m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building & sides of the foundation. 90 Cement concrete with cement, coarse sand and 4 cm gauge stone ballast in proportion of 1:6:12 in foundations and under floors including supply of all materials, labour and T&P etc. required for proper completion of the work. 91 Cement concrete with cement, coarse sand and 2 cm gauge approved hard stone ballast in proportion of 1:2:4 including supply of all materials, labour, side shuttering if required and T&P etc. required for proper completion of the work. 92 Mild steel or iron work in heavy sizes such as trusses, built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. 93 TMT/Tor steel in plain work such as reinforced concrete work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) 94 P/F 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron,diagonal bracings with 50x5 mm flat including supply and fixing of necessaryfitting, 2 No. lock rail of 16 dia, 375 mm long and including pintel hooks at the top and bottom, applying a priming coat of red oxide paint on all sides complete. 95 RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast in proportion of 1:2:4 in slab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials, binding wire, labour and T&P etc. required for proper completion of work. 96 1st class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. 97 1st class brick work in 1:6 cement and coarse sand mortar in super structure for wall of one brick thickness including supply of all materials, labour and T&P etc. required for proper completion of the work. 98 As in above item but for wall of thickness half brick (115 mm) & 1:4 cement mortar. 99 Brick work with old or dismantled bricks in 1:6 cement and coarse sand mortar for 230 mm thick wall in super structure including cost of all materials, labour and T&P etc. required for proper completion of the work but excluding the cost of bricks. 100 12 mm thick plaster with cement mortar in proportion of 1:6 cement and coarse sand over brick work, minimum thickness not to be less than 10 mm including supply of all materials, labour and T&P etc. required for proper completion of the work. 101 12 mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand over brick work, minimum thickness not to be less than 10 mm including supply of all materials, labour and T&P etc. required for proper completion of the work. 102 12 mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand on ceiling, minimum thickness not to be less than 10 mm including supply of all materials, labour and T&P etc. required for proper completion of the work. 103 3 mm thick floating coat of neat cement finish including supply of all materials, labour and T&P etc. required for proper completion of the work. (Cement consumption 0.044 bag/Sqm) 104 2.5 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm graded approved stone ballast laid in panels finished with 3 mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing overlapping mortar at the joints of the panels if any and giving them a uniform finish without base concrete including supply of all materials, labour and T&P etc. required for proper completion of the work. 105 P/F glass strips of 3.15 mm thickness & 25 mm depth in joints of floor and skirting at the time of laying floors, flush with floor level including supply of all materials, labour & T&P etc. required for proper completion of the work. 106 P/L 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make, laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete including supply of all materials, labour and T&P etc. required for proper completion of work. 107 P/L 6 mm thick glazed tiles in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete including supply of all materials, labour and T&P etc. completion required for proper completion of the work. 108 Fabrication & supply and fixing of Tubular steel trusses dulypainted with one coat of red oxide paint, designed & manufacturedas per latest I.S.S. suitable for A.C. sheet or profile sheet roofing cover of the shed (Thickness of Tubes shall not be less than 3.25 mm) including cost of all materials, labour and T&P etc. required for proper completion of work & cartage upto site as per drawing including all accessories. 109 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 110 Repair to plaster in patches including removal of old plaster racking out joints to 1 cm depth, watering the area and then replastering with 1:4 cement mortarincluding supply of all materials, labour and T&P etc. required for completion of the work. 111 Finishing walls with water proof cement paint of approved made like Super Snowcem or equivalent quality on new work with two coats to give an even and required shade including supply of all materials, labour etc. required for proper completion of the work. 112 Finishing walls with water proof cement paint of approved made like Super Snowcem or equivalent quality on previously treated surface with first coat to give an even and required shade including supply of all materials, labour etc. required for proper completion of the work. 113 Same as above item but for the second coat after the first coat. 114 S/F welded wire mesh size 75x25 mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer, welding etc. as required including cost of all labour, materials and T&P required for proper completion of the work. (Except cost of M.S. angle and flat) 115 P/F 15 mm Ø B-class Jindal, JTC, ISI marked G.I. Pipes complete with G.I. special such as bend, tee, socket, cross, clamp etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. and all materials, labour and T&P etc. complete (internal work). 116 P/F 15 mm Ø ISI UPVC/CPVC pipe (as per requirement) complete with special such as bend, tee, socket, cross, clamp, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate alsoincludes concealed G.I. fitting where required, cutting and making good the walls etc. and all material labour T&P etc. complete (internal work). 117 P/F 20 mm Ø ISI UPVC/CPVC pipe (as per requirement) complete with special such as bend, tee, socket, cross, clamp, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate alsoincludes concealed G.I. fitting where required, cutting and making good the walls etc. and all material labour T&P etc. complete 118 P/F Brass Bib Cock 15 mm Ø (200 gm) (L&K or equi.) ISI mark heavy quality including supply of all materials, labour and T&P etc. required for proper completion of the work. 119 P/F CP Brass Bib Cock 15 mm Ø ISI mark heavy quality (200 gm) (L&K or equi.) including supply of all materials, labour and T&P etc. required for proper completion of work. 120 P/F CP Brass Stop Cock 15 mm Ø ISI mark heavy quality (200 gm) (L&K or equi.) including supply of all materials, labour and T&P required for proper complition of the work. 121 S/F of15 mm Ø PVC bib cock including replacing of old bib cock complete. 122 P/F 15 mm Ø CP brass pillar cock ISI mark heavy quality (L&K or equi.) including supply of all materials, labour and T&P etc. required for proper completion of the work. 123 P/R of 15 mm dia G.I. union size, ISI mark heavy quality for repair of pipe line including supply of all materials, labour and T&P etc. required for proper completion of the work. 124 S/F of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of the work. 125 P/F 15 mm Ø PVC ball float valve with brass union & rod complete, ISI mark heavy quality including supply of all materials, labour and T&P etc. required for proper completion of the work. 126 P/F PVC connection pipe 300x15 mm with 2 brass units including supply of all materials, labour and T&P etc. required for proper completion of the work. 127 P/F Stainless Steel/CI Grating 100 mm Ø including all materials, labour cartage, T&P etc. required for proper completion of the work. 128 P/F 15 mm Ø half turn gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of the work. 129 P/F of 110 mm Ø PVC pipe (4 kg./sq.cm) for rain water down pipe with specials such as tee, bend, socket, elbow, binding clip, etc. including cutting of pipe wherever necessary and including all materials, labour and T&P etc. required for proper completion of the work. 130 P/L SWR, 75 mm Ø PVC (Finolex or equivalent) pipe including cost of excavation, C.C. etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 131 Cleaning of existing water pipe line of different dia upto 2 dia including digging trench and refilling, opening and cleaning of pipes, cutting, threading if required fixing and including making good the road and wall etc. as directed by the Engineer-in-charge including supply of all labours and T&P etc. required for proper completion of the work. 132 Providing & replacing first quality white glazed Orissa pattern W.C. pan Hindustan, Cera make or equivalent brand size 580 mm without P trap including supply of all materials, labour and T&P etc. complete. 133 Providing and fixing first quality white glazed European type W.C. pan Hindustan, Cera make or equivalent brand without P trap including supply of all materials, labour and T&P etc. complete. 134 P/F 100 mm Ø white glazed P or S trap for W.C. including cement concrete and all materials, labour cartage, T&P etc. required for proper completion of the work. 135 Providing and fixing Plastic seat cover complete with plastic lid for European type WC ISI marked including supply of all materials,labour and T&P etc.complete. 136 P/F 10 littres low level PVC flushing cistern, complete with all fittings including supply of all materials, labour and T&P etc. required for proper completion of the work. 137 P/F in position 32 mm Ø PVC flush pipe for W.C. with unions, bends etc. including supply of all materials, labour and T&P etc. required for proper completion of the work. 138 P/F Elliptical wash hand basin of white glazed earthenware first quality ISI marked (Hindustan / Cera make or equivalent brand) including supply of all materials, labour and T&P etc. complete. 139 P/F flat back 465 x 355 x 265 mm size lipped front urinal basin of white glazed earthernware first quality (Hindutan, Neycer or equivalent make) I.S.I. marked including supply of all materials, labour and T&P etc. required for proper completion of work. 140 P/R 32 mm Ø PVC waste pipe in position for sink or wash basin including supply of all materials, labour and T&P etc. required for proper completion of the work.
