Tender For Deposit Work Under Edd-I Baraut, Work Related To Jhatpat/Nivesh Mitra/Deposit Scheme Under Electricity Distribution Division-First Baraut. , Delivery Of The Following Material From The Power Storage Center Baghpat / Baraut / Meerut To The 33/11, baraut-Uttar Pradesh

Tender For Deposit Work Under Edd-I Baraut, Work related to Jhatpat/Nivesh Mitra/Deposit Scheme under Electricity Distribution Division-First Baraut. , Delivery of the following material from the power storage center Baghpat / Baraut / Meerut to the 33/11 KV substation / workplace, which includes loading and unloading. ST Pole (11m), PCC Pole (8.5m) 10/16 KVA converter 25 KVA converter 63 KVA transformer 100kva converter 250 KVA transformer Transportation work of 70/120/185 Sq.MM size XLPE cable from Power Storage Center Baghpat Meerut to the site. Work of hauling line material like 11 KV Pin, 11 KV Pin Insulator, 11 KV Disc, Stay Wire, ACSR Weasel Conductor etc. Work of transportation of (1X16+1X25Sq.MM) single phase SB cable from Power Storage Center Baghpat/Meerut. Work of transportation of LT ABC (3X50+1X35+1X16 Sq.MM), (3X95+1X70+1X16Sq.MM) and (3X120+1X95+1X16) Sq.MM. Work of erecting 8.5/11 meter PCC pole by digging deep pit. To make double pole, erecting the pole by digging a pit and then filling the pit again. Plinth construction work to house 250/400/KVA transformer. The work of obtaining 250/400/KVA transformer from the storage center and installing it on the plinth and making cable connections. Work of jointing cable box of 70/120/185 Sq.MM cable (Jointing cable box kit will be payable by the department). The work of earthing of metering cubicles/transformers by doing water level/chemical earthing as per RESPO standards in which decentralized material will be paid by the tenderer. Work of installing all the material on double pole. Holding clamp with nut bolt 11kv pin insulator with pin 11 KV Disc Insulator with Fittings SS Channel 125X65X1300 mm T-Off SS Channel 125X65X2240 mm Top SS Channel 100X50X2028 MM Dropper SS Angle 75X75X6X2028 mm (Converter Base) Polo grouting work. Installation of stays (including grouting). Work of installing 25/63/100 KVA transformer on double pole. The work of earthing the neutral and body of the transformer. Gudging work of HT lines (GI wire material will be paid by the tenderer) Line construction work by ACSR Weasel conductor. Work of making LT single face (1X25+1X16) Sq.MM ABC line. Work of making lines of LT ABC (3X50+1X35+1X16 Sq.MM) (3X95+1X70+1X16Sq.MM) and (3X120+1X95+1X16) Sq.MM. Connecting the consumer by jumpering from the HT side and connecting the cable from the LT site. Work of laying overhead XLPE 11 KV cable (by applying clamps/packing at appropriate distance through earthing/staywire between two poles) as per site requirement (decentralized material to be paid by the tenderer) As per requirement, work of laying XLPE cable underground through HDEP pipe of 4/6 inch width. (Payable by pipe tenderer) Collecting 11 KV metering cubicle, CT-PT unit, cable jointing kit (3/4 nos.) from the storage center and delivering it to the installation site, filling the cable box and connecting it to the line and connecting it to the CT-PT unit in the 11 KV metering cubicle metering room. Energizing the combination by applying. (The meter on the connection will be installed by the department.) Facing work of 250/400 KVA distribution transformers including earthing LT TELNESS FUSE UNIT INSTALLATION (INCLUDING FUSE) Material payable by the tenderer LT clamp nut with bolt Holding clamp with nut bolt F clamp nut with bolt Replacement of 11 KV Damaged 11 kv XLPE cable 3×185 mm2 Replacement of 11 KV Damaged 11 kv XLPE cable 3×185 mm2 Replacement of 11 KV Damaged 11 kv XLPE cable 3×185 mm2 Replacement of 11 KV Damaged 11 kv XLPE cable 3×185 mm2 Replacement of 11 KV Damaged 11 kv XLPE cable 3×185 mm2 Replacement of 11 KV Damaged 11 kv XLPE cable 3×185 mm2 carriage of remaining of all material from site to JE Store baraut town note 1. All work will have to be done as per RESPO standards. 2. The quantity of the above work number 01 to 50 is completely estimated and according to the requirement of the work, the quantity of any work can be from zero to maximum (within the limit of the tender amount). 3. As per the orders of the competent officer, work can be done in any section/sub-section under the Electricity Distribution Board, Baghpat. 4. In case item wise prevailing/market rate is not obtained in the above work, item wise negotiation will be done.

INR 1180 /-

INR 10000.0 /-

Refer document