|
| 1 | DISTRIBUTION WIRINGDistn. wiring in 22/0.3 (1.5 sqmm) single core stranded \"FR\"PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make)fixed on sheet metal (16 SWG) switchboard with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC |
| 2 | Avg run 6 mtr |
| 3 | Supplying and Drawing 1.1 KVsingle core stranded \"FR\"PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required |
| 4 | a) 2x2.5 sqmm+1x 1.5 sqmm EC |
| 5 | Supplying and fixing PVC Rigid Conduit \"FR\" [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works |
| 6 | 20mm |
| 7 | Supplying and fixing 415V,16-32A per way , double door Horizontal TPN MCB Distribution board with IP-42/43 protection,with 4 pole isolator as incomer and SPMCB\"s (\"C\" curve,10kA) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Legrand/ABB/Siemens) a) 4 way,,63A FP isolator,12 nos. SPMCBs as outgoing(for Walking passage in 1st floor for charging light,fan,exhaust etc) |
| 8 | 4 way ((L&T/Legrand/ABB/Siemens) |
| 9 | Supplying and fixing double-door SPN MCB Distribution Boardwith IP-42/43 protection, with DP isolators as incomer and SPMCB(\"C\" Curve,10A) as outgoing,fixing at flat iron frame on wall &mending good the damages to original finish; inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Make: Legrand/ABB)i) (2+8)Way,with S&F 240V 32Amps DPMCB isolator as incomer and 240V 6-32A SPMCB of Breaking capacity 10KA & C characteristics 4 nos as outgoing, |
| 10 | 2+ 4 Way (L&T/Legrand/ABB/Siemens) |
| 11 | PLUG & SOCKETSupply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. |
| 12 | Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required |
| 13 | Supply & Fixing modulartop cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required (make : lagrand |
| 14 | 4 module |
| 15 | SUPPLY OF CABLESupply & delivery ofXLPE/A Al cablewith 2 nos 10 SWG GI wire as ECC.(Make- Havells/Polycab/KEI) as per choice of EIC. |
| 16 | 4Core 35 Sqmm.(For PANEL TO TPN DB ) |
| 17 | 2 Core 10 Sqmm. |
| 18 | 2 Core 6 Sqmm. |
| 19 | LAYING OF CABLELaying of cable from 3/3½ core 35 sqmm to 50 sqmmon wall / surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting |
| 20 | 4Core35 Sqmm. |
| 21 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting |
| 22 | 2core 10 sqmm. |
| 23 | 2core 6 sqmm. |
| 24 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection onthe top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. |
| 25 | 2core 10 sqmm. |
| 26 | 2core 6 sqmm. |
| 27 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofXLPE/PVC armoured cables as below : |
| 28 | 4 core 35sqmm |
| 29 | 2core 10sqmm |
| 30 | 2core 6 sqmm |
| 31 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials |
| 32 | 4 core 35sqmm |
| 33 | 2core 10sqmm |
| 34 | 2core 6 sqmm |
| 35 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 36 | 2.5 Sqmm |
| 37 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials asrequired |
| 38 | 32 mmdia |
| 39 | SUPPLY OF LIGHT FITTINGSS& Delivery of Single LED tubelight with box type frame complete with all accessories along with test and warrenty certificates. WARRENTY SHOULD NOT BE LESS THAN 3 yrs. MAKE: CG ECO-1 IGP161LT8-16 & ULTRON PLUS 18W LT8-18-865-(3)/ PHILLIPS/ C&S LED or equivalent. |
| 40 | S& Delivery of Single LED tubelight T8 Tube with in built driver and efficacy of 100lm/W (Make:philips/Crompton / bajaj |
| 41 | S/FBC LED lamp (B22) as per direction of E.I.C. (Make- Philips/Crompton/Syska) |
| 42 | a. 12 Watt |
| 43 | Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceilingwith 2 No. 20 mm dia EI conduit (14 SWG) supportsfixed with “U” type MS clamp whose both side fixed on ceiling with sutable size 4 nos. fastenerand other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. |
| 44 | Supplying & Delivery of Street light fittings 25 Watt(Specification- Pressure dia cast aluminium housing , IP-66, flat glass,constant current potted driver ,100 lu/watt , (Make -Crompton ( Model- LSTS -25-CDL -M)/Philips) |
| 45 | 25 Watt |
| 46 | Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with allaccessories to be fixed /projected from the wall of the building incl. making holes/providing clampingarrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts.average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. |
| 47 | Supplying & Delivery of250 volts, 50 Hz 450mm ,1325rpm 90Watts sweep Metall Body Wall Mount Fancomplete with all accessoriesincluding connections as reqd. as per choice of E.I.C. (Make-USHA-Dominaire /Orient , Model-Tornado Wall II/EPCColour-as per choice of E.I.C ) |
| 48 | 450mm |
| 49 | Fixing only Wall Bracketfan complete and making necessary connection as required by 2x1.5 sqmm flexible copper wire. |
| 50 | Supply & Fixing240V, Modular Socket (2 Module) type fan regulator (Step type)(Brand approved by EIC)on existing Modular GI switch board with top cover plate incl. making necy. connections etc. |
| 51 | Supplying and fixing MCB SS enclosurewith IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection& provision for earthing attachment . |
| 52 | 2 way |
| 53 | Supplying and fixing 240/415 V MCB Isolator ondin rail of existing DBs and necessary connection. |
| 54 | 2 way 240 V 2 POLE 32A MCB Isolator |
| 55 | S/F GI water proof type looping cable box size 200 x 150 x 100 mm deep having 4 mm thick comprising ofone 250 volt 15 Amp kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for 2 core 10 sq. mm. PVC/Al cable & having lined with rubber gasketted CI top cover with brass machine screws etc. earthing terminal with lug on ST pole near base, incl. S/F 40 x 6 mm thick MS clamps with bolts nuts etc. incl painting with anticorrosive paint & providing 2 nos 40 mm dia. ISI-M GI pipe protection for incomer & outgingcable. (6 nos for roof light, 2 nos for gate light and 8 nos for pole light) |
| 56 | Loop Box |
| 57 | For loop wiring 3 x 22/0.3 (1.5 sqmm)(forcompound Light Loop Box to Light Connection) |
| 58 | SITC LED SIGN BOARDS & F ofLED sign Board of following sizes . [Size: 1 no. rectangular 80sqft , Gate no 1 (semi circle) 48 sqft , Gate no 2 (semi circle) 76 sqft.] |
| 59 | Labour charges for dismantaling all additional EI work installed during Covid Hospital by co. own tools.( 1 no skilled and 1 helperfor 3 days). |
