|
| 1 | Supplying and erecting in position of 250 liters capacity Industrial Model Reverse Osmosis Water- cum-purifier to deliver Potable Water with world Health Organisation (WHO) Standards with following accessories(a) MSSkid – 1No(b) Media 11054 No, Vessel with 20 bb Multiport Valve(with Media Pubble and Fine Sand and Activated Carbon Filling)set(c)Feed Pump 0.50 HP – 1 No. (d)Vertical Pump 2-9, 2.00HP / Single Phase – 1 No(e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) – 1 No.and Membrane Pressure Vessel 40 x 40 – 1 No. & Pressure Gauge – 2 Nos.(f) Flow Meter – 1 No.20” Filter with Housing – 1 No., Low Pressure Switch – 1 No., Level Switch – 1 No. & Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel ControlSystem with necessary StainlessValves and Fittings |
| 2 | Dismantling Pressed tiles and weatheringcourse. |
| 3 | Weathering course usingconcrete broken brick jelly 20mm gauge in pure slacked lime 32 : 12.5 cft. (32 broken brick jelly 20mm gauge and12.5 lime) over RCC roof slab for required depth of 80mm forgiving required slope and thickness to roof as required,well beaten with wooden beaters,etc.,complete as directed during execution. |
| 4 | Terrace flooring with one course of pressed tiles 20cmx20cmx20mm usingC.M. 1:3 etc.(ISI STD), |
| 5 | Plastering with cement mortar 1:4 (1 cement and 4 Psand)12mm thickincluding curing, etc., complete. |
| 6 | White washing one coat over a newplastered surface. |
| 7 | Colour washing two coats with supercem or snowcem or any other approved cement based colour washing over old plastered surfaceof approved colour and make including thorough scrapping and washing of the old plastered surface with soap, soda water, etc.,and also prepare the surface andcuring,etc.,complete.(ISI STD) |
| 8 | Painting old iron work two coats withready mixed paint of superior quality and approved colour.(ISI STD) |
| 9 | Stainless Steel Handrail 900mm highProviding and fixing stainless steel handrail 900mm high (as shownin drawing) made out of stainless steel conforming to SS 304 with 8%to8.5% nickel using 50.8mm outer dia at top (with 1.6mm wall thickness) and 38.10mm(1.6mm wall thickness ) stainless steel pipe placed vertically at 1m centre to centre and two horizontal SS pipe 25.40mm outer dia (with 1.2mm wall thickness) welded at a distance of 300mm using TIG welding process with 308L SS electrode (in station building all flooor staircases) with necessary bends, flanges and base plates. Rate is inclusive of all materials, labours, lead, lift,etc. as directed byEngineer in-charge. |
| 10 | Fabricating Supplying and fixing in position of Al... Fully Glazed |
| 11 | Providing and fixing 110mm dia PVC soil or ventpipe.with relevent ISI STD. |
| 12 | White washing three coats over newplastered surface |
| 13 | Supply & Fixing of 48\" sweep size CEILING FAN of 5 Star Rated with double ball bearing , down rod, canopy complete set (with out speed regulator) ( INCLUDIN SUPPLY & FIXING OF FAN CLAMP WITH SIDE PLATE AND 45 cm. ( 18\" ) CROSS ARM WITH 700 MM DOWN PIPE ) |
| 14 | Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box and 5AF.T. switch with painting of suitable Colour for open PVC light point / fan point (For electroic regulator) ( 6 points per coil) |
