Bids Are Invited For Gaskets 14304050040 Boker drum mestu gasket Pre-cut Butter dam maritule diExpanded righ metacarpe-c gasket Conforming to ABE 16:21-2012 operating lampera-600Deg Appl condena/Superheated st Size: 00 456X ID 405X THK 3MM table for sparsting pr-200 87725000020 Exp graphite SW 60X40X32 Expanded graphite spinar wound pasket without metering. MOC of spiral winding: 58 304 MOC of Graphite Shall be Cont ASME B16.20-2012 Su 60x40x3.2 Butable for operating pressure-150 Bar opereling Semperature-600DegC, Application media Hotshame Supertatutta 8772301300 Exp graphite SW7X3.2mm Expanded grapide spinal wound asked without mering MOC of spins wonding 55 304. MOC Graphite S50X37X3.2mm Shall be Condurmang lo ASME 81820-2012, Bultable for sparing pressure-150 Bar operating temperature-800g Applica Exp graphite S320C2740 Expanded graphite spinar wound pasket without innet utering. MOC of winding 55 304. MOC Graphite 322740 Shall be Conforto AE 81820-2012 Stableforspring pressure-150 Bar operating temperature:800g Applica Hofeam condenade Siperten 77250000 Exp graphite SW-40.5X31.7532 Expended graped spinal wound pasket without innat or outer ring MOC of 58304 MC Graph 40.5X31.75X3.2mm. Shall be Conforming to ASME B16.20-2012. Suitable for operating pressure:-150 Bar, operating temperature:-600DegC, Application media-Hot steam condensate Superheated steam 87725081230 Exp. graphite SW gasket: 54X65X3.2mm Expanded graphite spiral wound gasket without inner or outer ring. MCC of spiral winding: SS 304. MOC of filler: Graphite. Size: 54X65X3.2mm. Shall be Conforming to ASME B16.20-2012. Suitable for operating pressure-150 Bar, operating temperature: 600DegC, Application media Hot steam condensatel Superheated steam. 87725084420 Exp. graphite SW gasket: 45X60X3.2mm Expanded graphite spiral wound gasket without inner or outer ring. MOC of spiral winding: SS 304. MOC of filler Graphite. Size: 45X60X3.2mm. Shall be Conforming to ASME B16.20-2012 Suitable for operating pressure-150 Bar, operating temperature: 600DegC. Application media Hot steam condensate Superheated steam. 87725084590 Exp. graphite SW gasket: 75X69X3.2mm Expanded graphite spiral wound gasket without inner or outer ring. MOC of spiral winding: SS 304. MOC of filler: Graphite. Size: 75X69X3.2mm. Shall be Conforming to ASME B16.20-2012. Suitable for operating pressure-150 Bar, operating temperature:-600DegC. Application media- Hot steam condensate Superheated steam 87725085920 Exp. graphite SW gasket: 42X56X3.2mm Expanded graphite spiral wound gasket without inner or outer ring. MOC of spiral winding: SS 304. MOC of filler: Graphite. Size: 42X56X3.2mm. Shall be Conforming to ASME B16.20-2012. Suitable for operating pressure-150 Bar, operating temperature: 600DegC, Application media Hot steam condensate Superheated steam 87725086040 Exp. graphite SW gasket: 78X60X3.2mm Expanded graphite spiral wound gasket without inner or outer ring. MOC of spiral winding: SS 304. MOC of filler Graphite. Size: 78X60X3.2mm. Shall be Conforming to ASME B16.20-2012. Suitable for operating pressure-150 Bar, operating temperature: -600DegC, Application media Hot steam condensate Superheated steam. 87725086110 Exp. graphite SW gasket: 64X50X3.2mm Expanded graphite spiral wound gasket without inner or outer ring. MOC of spiral winding: SS 304. MOC of filler: Graphite. Size: 64X50X3.2mm Shall be Conforming to ASME B16.20-2012. Suitable for operating pressure:-150 Bar, operating temperature: 600DegC, Application media Hot steam condensate Superheated steam. 87725095190 Exp. graphite SW gasket: 60X50X3.2mm Expanded graphite spiral wound gasket without inner or outer ring. MOC of spiral winding: SS 304. MOC of filler: Graphite. Size: 60X50X3.2mm Shall be Conforming to ASME B16.20-2012. Suitable for operating pressure:-150 Bar, operating temperature: -600DegC. Application media Hot steam condensate/ Superheated steam. 87725120000 MS18 Valve Bonnet SS316 Graph SPW Gasket MS 18 VALVE BONNET SS316+Graphite Filled SPW Gasket Size- 1094MMX1002MMX4.00MM. IT IS REQUIRED TO WITHSTAND A PRESSURE OF 150KG/CM2 AND TEMPERATURE OF 600 DEG C. Conforming to ASME B16.20. 87725095200 Exp. graphite SW gasket: 160X145X3.2mm Expanded graphite spiral wound gasket without inner or outer ring. MOC of spiral winding: SS 304. MOC of filler: Graphite. Size: 160X 145 X 3.2mm. Shall be Conforming to ASME B16.20-2012. Read For 4 Class-300 WCB, BHEL make globie valve in Boiler#4, Suitable for operating pressure:-100 Bar, operating temperature:-550DegC, Application media: Hot steam condensate Superheated steam 87725081160 Exp. graphite SW gasket: 66X39.7X3.2 MM Expanded graphite spiral wound gasket without inner or outer ring. MOC of spiral winding: SS 304. MOC of filler: Graphite Size: 65 X 39.7 X 3.2 MM. Shall be Conforming to ASME B16.20-2012. Suitable for operating pressure:-150 Bar, operating temperature: -600DegC. Application media Hot steam condensate Superheated steam. 87725081160 Exp. graphite SW gasket: 66X39 7X3.2 MM Expanded graphite spiral wound gasket without inner or outer ring. MOC of spiral winding: SS 304. MOC of filler: Graphite. Size:-65 X 30.7 X 3.2 MM. Shall be Conforming to ASME B16.20-2012. Suitable for operating pressure-150 Bar, operating temperature: 600DegC, Application media: Hot steam condensate/ Superheated steam. 87725095210 Exp graphite SW gasket: 210X190X3.2mm Expanded graphite spiral wound gasket without inner or outer ring. MOC of spiral winding: SS 304 MOC of filler: Graphite. Size: 210X 190 X 3.2mm Shall be Conforming to ASME B16.20-2012 Read For 6 Class-300 WCB, BHEL make globe valve in Boller4. Suitable for operating pressure-150 Bar, operating temperature:-600DegC. Application media Hot steam condensate Superheated steam. 95770603500 Metal ring for Graph. Pr seal-140X125X3mm Metallic reinforcement Ring for a Pressure seal ring of high pressure valve (Pure Flexible Moulded Graphite Pressure seal ring), Size of metalic reinforcement ring: 140X125X3mm. MOC-SS-316L. Conforming to ASME B16:20-2012. SUITABLE TO WITHSTAND TEMP. 500°C <I>&<> PRES BAR. Thickness:-30mm 87725095260 Exp, graphite SW gasket:46x36x3.2 MM Expanded graphite spiral wound gasket without inner or outer ring Size: 46X36 X 3.2mm. MOC of spiral winding material: SS 316L. MOC of filler Flexible Graphite with carbon content=99-99.9% Shall be Conforming to ASME B16.20-2012. Suitable for upto 400° C <(>&<> 230 kg PRESSURE. Read for Boiler#4<(>&<)>5 1 Valves in PO4, N2H4 dosing etc 57725095270 Exp. graphite SW gasket: 222X157X4.5mm EA Expanded graphite Spiral wound gasket with inner <(>&<)> outer ring, Overall Size: 222X157X4.5mm. Shall be Conforming to ASME B16.20-2012. MOC: INNER RING-SS 316L, WINDING MATERIAL: SS 316L + FLEXIBLE GRAPHITE AS FILLER, OUTER RING CS. Sizes:- Inner ring-157X169X3.2mm, SW Gasket:-168X206X4.5mm, Outer ing:- 206mmX222X3.2mm. Application For Make upwater pump 1,2,3 discharge, Max Operating Pressure: 35 Kg/cm2, Max Operating temp 250DegC Media: Hot Steam condensate. 87725095280 Exp. graphite SW gasket: 270X207X4.5mm EA Expanded graphite Speal wound gasket with inner <(>&<j> outer ring, Overall Size: 270X207X4.5mm. Shall be Conforming to ASME B16.20-2012. MOC INNER RINGSS 316L, WINDING MATERIAL: SS 316L+FLEXIBLE GRAPHITE AS FILLER, OUTER RINGCS Sizes: Inner ring-207X219X3.2mm, SW Gasket:-219X254X4.5mm, Outer ring:-254X270X3.2mm Application:- For Make upwater pump#1,2,3 suction, Max Operating Pressure: 35 Kg/cm2, Max Operating temp:-250DegC. Media: Hot steam condensate. 87725095290 Exp. graphite SW gasket: 213X134X7.2mm Expanded graphite Spiral wound gasket with inner <>&<)> outer ring, Overall Size: 213X134X7.2mm. Shall be Conforming to ASME B16.20-2012. MOC: INNER RING: SS 316L, WINDING MATERIAL SS 316L + FLEXIBLE GRAPHITE AS FILLER OUTER RING: CS Sizes:- Inner ring:- 134X146X5.0mm, SW Gasket:-146X190X7.2mm, Outer ring: 190X213X5.0mm Application:- For Boiler feed pump #1,2,3 discharge, Max Operating Pressure- 150Kgium2. Max Operating temp:-250 Deg 87725095300 Exp. graphite SW gasket: 216X162X7.2mm Expanded graphite Spiral wound gasket with inner <(><)> outer ring, Overall Size: 216X162X7.2mm. Shall be Conforming to ASME B16.20-2012. MOC: INNER RING-SS 316L, WINDING MATERIAL-SS 316L FLEXIBLE GRAPHITE AS FILLER, OUTER RING-CS, Sizes: Inner ing-162X174X5.0mm, SW Gasket:-174X200X7.2mm, Outer ring: 200X216X5.0mm Application For Boiler feed pump#1,2,3suction, Max Operating Pressure: 150Kg/cm2, Max Operating temp:-300DegC 87725096330 Exp. graphite SW gasket: 106X 57X4.5mm Expanded graphite Spiral wound gasket with inner <(><)> outer ring Overall Size: 106X 57X4.5mm. Shall be Conforming to ASME B16.20-2012 MOC: INNER RING-SS 316L, WINDING MATERIAL SS 316L FLEXIBLE GRAPHITE AS FILLER, OUTER RING-CS Sizes: Inner ring-57X69X3.2mm, SW Gasket -69X90X4.5mm, Outer ring:-90X106X3.2mm Application:- For Make upwater pump#1,2,3 discharge NRV side, Max Operating Pressure:-36 Kg/cm2, Max Operating temp:-220DegC 87725095310 Exp. graphite SW gasket: 117X 57X7.2mm Expanded graphite Spiral wound gasket with inner <>&<> outer ring, Overall Size: 117X 57X7.2mm. Shall be Conforming to ASME B16.20-2012. MOC: INNER RINGSS 316L, WINDING MATERIAL-SS 316L + FLEXIBLE GRAPHITE AS FILLER, OUTER RING:CS. Sizes-Inner ring:- 57X69X5.0mm, SW Gasket:-69X100X72mm, Outer ring:-100X117X5.0mm. Application: For Boiler feed pump#1,2,3 discharge NRV side, Max Operating Pressure: 150 Kg/cm2, Max Operating temp:-300DegC 87725095340 Exp. graphite SW gasket: 60X 57X2.5mm Expanded graphite spiral wound gasket without inner or outer ring. MOC of spiral winding: SS 304. MOC of filler Graphite. Size: 60X 57X2.5mm Shall be Conforming to ASME B16.20-2012. Application: For B#1.2.3 BFP Recimulation line NRV, Max Operating Pressure: 150 Kg/cm2, Max Operating temp:-300DegC 87725095350 Exp. graphite SW gasket: 88X 77X2.5mm EA Expanded graphite spiral wound gasket without inner or outer ring. MOC of spiral winding SS 304 MOC of filler: Graphite. Size: 88X 77X2.5mm Shall be Conforming to ASME B16.20-2012. Application: For B#1,2,3 BFP Balance leak off line isolation valve, Max Operating Pressure 150Kg/cm2, Max Operating temp:-300DegC 67725000000 BFP SUCTION STRAINER TOP FLANGE GASKET EA BFP HDB 125/7 SUCTION STRAINER TOP FLANGE GASKET SS304/CAF/SWP SIZE: 205X270X3.2 MM. Conforming to ASME B16.20. Max Operating Pressure: 150Kg/cm2, Max Operating temp:-300DegC, Media Hot Steam condensate 87725080010 BFP SUCTION STRAINER BOTTOM FLANGE GASKE EA BFP HDB 125/7 SUCTION STRAINER BOTTOM FLANGE GASKET SS304/CAF/SWP 87725095360 KAMMPROFILE GASKET-160*200*4.6mm EA KAMMPROFILE GASKET TYPE C#, SIZE-160*200*4,6mm (0.8+03+0.8) SS316 METAL CORE WITH CONCENTRIC SERRATED GROOVE ON EACH SIDE AND ADDITIONAL OF APX2 GRAPHITE LAYER OF SEALING MATERIAL BONDED WITH EACH FACE 103 MM SS316 KAMMPROFILE WITH 0.8 MM THE GRPAHITE ON BOTH SIDE) Shall be Conforming to ASME B16.20-2012. Joint Tongue <(>&<)> Groove ffanged joint, Application: For TG Balancing pipe flanges, Meduz Superhealed steam. Max Operating Pressure: 100 Kg/cm2. Max Operating temp:-550DegC 87725095370 KAMMPROFILE GASKET-160*200*6.6mm EA KAMMPROFILE GASKET TYPE C WITHOUT CENTERING RING, SIZE-160*200*6.6 (0.8+05+0.8) SS316 METAL CORE WITH CONCENTRIC SERRATED GROOVE ON EACH SIDE AND ADDITIONAL OF APX2 GRAPHITE LAYER OF SEALING MATERIAL BONDED WITH EACH FACE 105 MM SS316 KAMMPROFILE WITH 0.8 MM THK GRPAHITE ON BOTH SIDE] Shall be Conforming to ASME B16.20-2012 Joint Tongue <(><)> Groove flanged joint, Application: For TG Balancing pipe, Media:- Superheated steam, Max Operating Pressure:-90 Kg/cm2, Max Operating temp:-550DegC 87725095390 Exp. graphite SW gasket:79x86X03mm EA Expanded graphite spiral wound gasket without inner of outer ring. Shall be Conforming to ASME B16.20-2012. MOC of spiral winding: SS 304. MOC of Stier: Graphite Size: 86x79X03mm Conforming to ASME B16.20. Reqd For 1.5 Class-1500 WCB, BHEL make globe valve in B#1,2,3 Balancing leak offline NPRV 87725080030 BFP FK 6D-30 DISCHARGE SERRATED GASKET EA BFP FK 6D-30 DISCHARGE FLANGE GASKET. TYPE-METALLIC JACKETED GASKET WITH NON-ASBESTOS FILLER, TENTATIVE SIZE 305X170X5.8 MM. Shall be Conforming to ASME B16.20-2012 Application:- Discharge flange of Boiler feed pump with max working pressure 150 Kg/cm2 <(>&<)> Max Working temp = 220 Deg C. For the item, Party shall secure the exact size from Site, by site visits, before supply 87725005430 KAMMPROFILE GASKET: 134x190x213x4.5mm EA KAMMPROFILE GASKET TYPE SGK With Centering ring. SIZE 134x190x213x4.5mm. Shall be Conforming to ASME B16.20-2012. SS 321 METAL CORE 3.5MM THICK INCLUDING 0.3MM CONCENTRIC SERRATED GROOVE ON EACH SIDE AND ADDITIONAL OF SOFT PURE GRAPHITE LAYER OF SEALING MATERIAL (0.5MM THICK) BONDED WITH EACH FACE <>&<> PARALLEL ROOT CORE WITH INTEGRAL CENTERING RING OF MOC FG, FOR CORRECT GASKET POSITIONING WITHIN FLANGE BOLT CIRCLE Application For Boiler feed pump #1,2,3 discharge, Max Operating Pressure: 150Kg/cm2, Max Operating temp:-300DegC 87725095440 KAMMPROFILE GASKET 162x200x215x4.5mm KAMMPROFILE GASKET TYPE SGK With Centering ring, Overall Sizer 162x200x216x4.5mm. Shall be Conforming to ASME B16.20-2012. SS 321 METAL CORE, 1.5MM THICK INCLUDING 0.3MM CONCENTRIC SERRATED GROOVE ON EACH SIDE AND ADDITIONAL OF SOFT PURE GRAPHITE LAYER OF SEALING MATERIAL (0.5MM THICK) BONDED WITH EACH FACE <(>&<> PARALLEL ROOT CORE WITH INTEGRAL CENTERING RING OF MOC-FG, FOR CORRECT GASKET POSITIONING WITHIN FLANGE BOLT CIRCLE Application: For Boiler feed pump #1,2,3suction, Max Operating Pressure: 35Kg/cm2, Max Operating temp:-300DegC 57725095450 KAMMPROFILE GASKET: 57x100x117x4.5mm EA KAMMPROFILE GASKET TYPE SGK With Centering ring Size: 57x100x117x4.5mm. Shall be Conforming to ASME B16.20-2012 SS 321 METAL CORE 3.5MM THICK INCLUDING 0.3MM CONCENTRIC SERRATED GROOVE ON EACH SIDE AND ADDITIONAL OF SOFT PURE GRAPHITE LAYER OF SEALING MATERIAL (0.5MM THICK) BONDED WITH EACH FACE <>&<> PARALLEL ROOT CORE WITH INTEGRAL CENTERING RING OF MOC-FG, FOR CORRECT GASKET POSITIONING WITHIN FLANGE BOLT CIRCLE. Application: For Boiler feed pump#1.2.3 discharge NRV side, Max Operating Pressure: 150 Kg/cm2, Max Operating temp:-300Deg 87725095460 KAMMPROFILE GASKET 134x190x213x76 EA KAMMPROFILE GASKET TYPE SGK With Centering ring. SIZE 134x190x213x7.6mm. Shall be Conforming to ASME B16.20-2012. SS 321 METAL CORE, 6.0MM THICK INCLUDING 0.5MM CONCENTRIC SERRATED GROOVE ON EACH SIDE AND ADDITIONAL OF SOFT PURE GRAPHITE LAYER OF SEALING MATERIAL (0.8MM THICK) BONDED WITH EACH FACE <(>&<> PARALLEL ROOT CORE WITH INTEGRAL CENTERING RING OF MOC-FG, FOR CORRECT GASKET POSITIONING WITHIN FLANGE BOLT CIRCLE Application:- For Boiler feed pump #1,2,3 discharge, Max Operating Pressure-150Kgiom2. Max Operating temp:-300DegC 87725095470 KAMMPROFILE GASKET 162x200x216x7.6mm EA KAMMPROFILE GASKET TYPE SGK With Centering ring, Overall Size 162x200x216x7.6mm. Shall be Conforming to ASME B16.20-2012. SS 321 METAL CORE 6.0MM THICK INCLUDING 0.5MM CONCENTRIC SERRATED GROOVE ON EACH SIDE AND ADDITIONAL OF SOFT PURE GRAPHITE LAYER OF SEALING MATERIAL (0.8MM THICK) BONDED WITH EACH FACE <(>&<)> PARALLEL ROOT CORE WITH INTEGRAL CENTERING RING OF MOC: FG, FOR CORRECT GASKET POSITIONING WITHIN FLANGE BOLT CIRCLE. Application For Boiler feed pump #1,2,3suction, Max Operating Pressure: 150Kg/cm2, Max Operating temp:300DegC 87725095480 KAMMPROFILE GASKET 57x100x117x7.6mm EA KAMMPROFILE GASKET TYPE SGK With Centering ring, Size: 57x100x117x7.6mm. Shall be Conforming to ASME B16.20-2012 SS 321 METAL CORE E OMM THICK INCLUDING 0.5MM CONCENTRIC SERRATED GROOVE ON EACH SIDE AND ADDITIONAL OF SOFT PURE GRAPHITE LAYER OF SEALINGc Total Quantity : 4503
