|
| 1 | Excavation for foundationin earth, soils of all types sand, gravel and soft murum including removing the excavated material up to a distance of 50 m. beyond the building areastacking and spreading as directed, dewater-ing, preparing the bed for the foundatin and necessary back filling, ramming, watering(including shoring and strutting) etc. complete(Lift upto 1.50 Metre) BD-A-1Page No.259 |
| 2 | Providing and laying in situ cement conrete in 1:2:4 of trap/granite /quartzite/gneiss metal for foundation and bedding including bailing out water, form work, compacting, finishingif required and curing etc.complete. BD-E-1 Page No.287 |
| 3 | Providing and casting in situ cement concreteM-20 of trap/granite/quartzite/gneiss metal forreinforced cement concrete beams and lintelsas per detailed designs and drawings, or asdirected including centering, formwork, compa-ction and finishing the formed surfaces withcement mortar 1:3 of sufficient minimum thick-ness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete(Excluding reinforcement) BD-F-6Page No.300 |
| 4 | Providing and casting in situ cement concreteM-20 of trap/granite/quartzite/gneiss metal forreinforced cement concrete work in foundationlike raft, grillages, strip foundation and footingsof reinforced cement concrete columns and steelstanchion including bailing out water, formwork,compaction, finishing, curing etc. complete(Excluding reinforcement)BD-F-3Page No.298 |
| 5 | Providing and casting in situ cement concreteM-20 of trap/granite/quartzite/gneiss metal forreinforced cement concrete columnsas per detailed designs and drawings, or asdirected including centering, formwork, compa-ction and finishing the formed surfaces withcement mortar 1:3 of sufficient minimum thick-ness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete(Excluding reinforcement) BD-F-5 Page No.300 |
| 6 | Providing second class Burnt Brick masonrywith conventional / Indian standard type bricksin cement mortar 1:6 in plinth as backing withcomposite masonry including bailing out watermanually, striking joints, racking out joints and watering complete. BD-G-1Page No.314 |
| 7 | Filling in plinth and floors with contractor\"s soil, sand or murum in 15 cm to 20 cm. Layers inclu-ding watering and compaction etc. completeBD-A-11Page No.263 |
| 8 | Providing and solling using 80 mm size trap metal15Cm layer inccluding filling voids with sand/gritramming watering comp.BD-A |
| 9 | Providing second class Burnt Brick masonrywith conventional / Indian standard type bricksin cement mortar 1:6 in superstructure includingstriking joints, racking out joints and watering &scaffolding complete.BD-G-5 Page No.315 |
| 10 | Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. |
| 11 | Providing & fixing factory-made steel door of Single leaf Internal Plain Steel finish type with a.) frame of size 100x58 mm conforming to IS : 4351-2003 , 1.2 mm thick pre galvanized sheet with mitred and welded cones , frame stretches, hinge reinforcing plates , fixing plates and hardware mounting plates and Polyurethane foam infill b.) Shutter of thickness 46mm made of 0.8 mm thick slip coated pre galvanized steel sheet on both sides conforming to ASTM A527/ASTM A525, BS 2989 1994, IS 277 , Zinc coating 120 GSM . Lock formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3 mm thick hinge reinforcing hardware mounting plates and lock protection with Honey-comb craft paper infill of thickness 150 GSM of load bearing capacity 500 Kilogram/ One Square Metre. c.) Finish: Powder coated surface finished with thermosetting polyurethane paint of Aliphatic grade of thickness 60-micron d.) Accessories: Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges of Dorset make, Dorset cylindrical lock, SS Tower bolt of 200 mm size, Door stopper complete. |
| 12 | Providing and fixing STEEL WINDOW OF VARIOUS SIZES as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (WITH GUARD BARS 12 MM SQUARE AT 10 CM C/C.) |
| 13 | Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 of trap / granite/quartzite/ gneiss metal FOR R.C.C. BEAMS AND LINTELS as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 14 | Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 of trap/ granite / quartzite/ gneiss metal FOR R.C.C. SLABS AND LANDINGS as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 15 | Providing and laying Cast in situ/Ready Mixcement CONCRETE M-20 of trap/ granite/ quartzite/ gneiss metal FOR R.C.C. CHAJJA as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 16 | Providing sand faced plaster externally in cementcement mortar using kharsalia/ kasaba or similartype of sand in all positions including base coat of15mm thk in cement mortar 1:4 using water proofing compound at 1kg/cement bag, curing the same for not less than 2days and keeping the surface of thebase coat rough to receive the sand faced treatment6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for 14 days scaffolding etc.complete using pozzolana cementBDL-7 Page No.367 |
| 17 | Providing internal cement plaster 12mm. Thickin single coat in cement mortar 1:5 with neerufinish to concrete or brick surfaces in all positionsincluding scaffolding and curing complete.BD-L-2A Page No.368 (32.04) |
| 18 | Providingneeru finish to plastered surfaces in allpositions including scaffolding and curing comp.BD-L-10 Page No.370 |
| 19 | Providing and applying Royale Luxury Emulsion of approved make on internal wall surface asdetailedbelowScrappingforsurfacewithemerypaperandwipecleanforarea. wall primer withbrushby adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dryfor 6 to8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of4to6hoursofactivity.Scrappingwithemerypaper andwipecleanApplying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45%or 65 to 70 % by roller. (With prior approval of S.E.) |
| 20 | Providingand applyingtwocoatsof exterioracraylicemulsion paintconfirmingto corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces includingcleaning,preparingtheplastersurface,applyingprimercoat,scaffoldingif necessary , and watering the surface for two days etc complete.BDO |
| 21 | Providing and applying two coats of flat oil paint of approved colour and shade to internal/ externalplastered surfaces including scaffolding if necess-ary, cleaning and preparing the surface (excluding primar coat) complete.BD-O-6 A(35.09)Page 405 |
| 22 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. BDF17 |
| 23 | Providingandapplyingwaterproofingtreatmentusingacrylicpolymermodifiedcement basedwaterproofingcoatingwithfibreglassmeshmixingattherateofpowdertoliquid (2:1)byweightcovering9to10SquareMetre/Kilogramwithtwocoatusingapproved chemicals for masonry andconcrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.BDJ |
| 24 | Providing sills of polished Kadappa stone 25 mmto 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing,polishing and cleaning complete.BD-M-29 C Pg.391. |
| 25 | Providingandfillinginthefoundationwithsandofapprovedqualityincludingwatering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer)BDA 13 |
| 26 | Providing & Fixing mild steel grill work for windows ,ventilators etc. 20 Kg/Sqm as per drawings includingfixtures necessary welding & painying with one coatof anti-corrosive paints & two coats of oil paintingComp. BD-U-1 Pg.537 |
| 27 | Providing and fixing BOARD DISPLAYING INFORMATION, SUCH AS \"NAME OF WORK, TENDER COST, NAME OF CONTRACTOR, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 28 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or anyother places. as per specification No:WG-MA/BW Item.No.1-3-2 |
| 29 | Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVCinsulated wire laid in provided conduit/trunking/inside pole/Bus bars or anyother places as per specification No: WG-MA/BW Item.No.1-3-1 |
| 30 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32mm with accessories on wall/ceiling as per specification No: WG-MA/CON. Item.No.1-2-7 |
| 31 | Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF Item.No.2-10-21 |
| 32 | Supplying and erecting modular type (two module) electronic step regulatorfor fan, duly erected on provided plate and box with wiring connections complete. Item.No.1-6-23 |
| 33 | Supplying and erecting modular type switch 16 / 20 A with indicator, dulyerected on provided plate and box with wiring connections completeItem.No.1-6-6 |
| 34 | Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. Item.No.1-6-11 |
| 35 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. Item.No.1-6-39 |
| 36 | Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as perspecification no. SW-SWR/MCB Item.No.5-3-3 |
| 37 | Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as perspecification no. SW-SWR/MCB Item.No.5-3-7 |
| 38 | Supplying and erecting single pole and neutral distribution board (SPNDB),with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GIframe as per specification no. SW-SWR/MCBDB Item.No.5-4-7 |
| 39 | Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no.EA-EP Item.No.9-1-4 |
| 40 | Supplying and erecting integrated LED street light fitting 40 to 50W IP65 &IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2 .Item.No.2-4-4 |
| 41 | Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty. Item.No.2-1-22 |
