|
| 1 | E/W in excavation in trenches for foundation and pipes, cables etc. in ordinary soil(lo an clay or sand ) i/c lift up to 1.5m and lead upto 50 m and dressing of sides and rammi ng of sides and disposal of surplus excavat ed earth as directed by the E/I witth in a lead of 50m as per S.I.No.251. |
| 2 | Providing and injecting chemical emulsion for preconstruction ant- termite treatment and creating barrier under and around the columns pits,wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external perimeter of binding expansion joints,Surrounding of pipes and conduit etc. complete( plinth area of the building at ground floor only shall be as per I.S. 6313 part B 1981 ) Aldrine emulsiable concentrate or any other approved material such as Heptachlor or chlorodane will be used. The rate of application of chemical emulsion shall be as follow : (1) Treatment for masonry and foundation 5 litres per sqm. 2) Back fill in immediate contact with foundation 7.50 litres per sqm.(3) Treatment of top surface of plinth filling5 litres per sqm.(4) Treatment of soil along external perimeter of building 7.50 litres per sqm. |
| 3 | Concrete with the 4 cm guageBrick Ballast, and Fine sand and Cement in proportion of 8:4:1 in foundation and under flooring complete in all. Pwd S.I275 |
| 4 | R.C.C. work with cement, approved coarse sand and 40 mm gauge approved stone ballast in the proportion M-20 in RCC raft foundation and footing excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc. as per Sl.No. 287. |
| 5 | M-150 class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work as per Sl. No. 303. |
| 6 | R.C.C. work with cement, approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:1½:3( 1 cement : 4½ aggregate ) in R.C.C. columns excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc. as per Sl.No. 289. |
| 7 | R.C.C. work with cement, approved coarse sand and 20 mm gauge approved stone ballast in the proportion M-20 inlintels of doors and windows sunshade and R.C.C. projuction excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc. as per Sl.No. 289. |
| 8 | First class Brick work in 1:4 cement & course sand Mortar in supre structureincluding all.required as pwd SI.N0 309(3) |
| 9 | Mild steel or Iron work of heavysizes and sections such as trusses,builtup gates ,door frame,roof work ,Gate etc. wrought to required i/cdrilling holes ,rivetting or welding etc.supply of steel and its westage i/c cost of bolts, nutsas required for proper completion of the work.as per S.I.No503 |
| 10 | As in item No.8 above but for gril (febricated)iron grill as per S.I.No. 503 |
| 11 | Febrication of Z- section steel windows, i/c necessary steel fitting such as handles etc. as per S.I.No. 503 |
| 12 | Fixing of door,windows and ventilator frames in position in buildingincluding proper adjustment required for proper completion of the work. As pr NBO-11.14 (A)Door chaukhat (B)Window chaukhat © Ventilator chaukhat |
| 13 | P/F ISI markedOxidized iron M.S.sliding Bolt 16 mm dia nut & 300 mm long with necessary screws etc. complete as per DSR-9.62.1 |
| 14 | P/F ISI markedOxidized iron M.S.Tower Bolt 10 mm dia nut & 250 mm long with necessary screws etc. complete as per DSR-9.63.1 |
| 15 | P/F ISI markedOxidized iron M.S.Door handles 125 mmlong conforming to IS:4992 with necessary screws etc. complete as per DSR-9.66.1 |
| 16 | R.C.C. work with cement, approved coarse sand and 20 mm gauge approved stone ballast in the proportion M-20 in Beam excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc. as per S.I. 289 |
| 17 | R.C.C. work with cement, approved coarse sand and 20 mm gauge approved stone ballast in the proportion M-20 in Slab excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc.as per S.I.No.289 |
| 18 | Supply and fixing of hexagonal fan box with approximate 80 mm in length febricated from 16 SWG M.S. sheet in corporating 10 mm dia M.S. round bar dulybent forsupporting fan hanger duly painted with red oxide and screwing arrangement with writing conduit laid on the RCC roofbefore concreting along with supply of all materials, labour and T & P etc.as per SI No. 1149. |
| 19 | Provision for sppply and fixing of 25mm dia CPVC Pipe as per Electrical Purpose as per Sor Ch-21 item No-101 |
| 20 | Mild steel or Iron in Plain such as R.C.C. and R.B. work (when not included in an over all rates ) wrought to required shape as necessary i/c bending for proper completion of the work and i/c supply of steel its wastage bend hooks authorised over lapping shall be measured upto floor two level. as per SI No. 504 |
| 21 | Cost Cement Concrete door sills ,chaukhats boundary post shelves work with cement, approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:2:4 in bed plates excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc. as per Sl.No. 282. |
| 22 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 Sr. No. 12.3 MORD 600 |
| 23 | 12 mm . Cement Plaster in 1:4 With Cement And CourseSand Mortar In Single Coat on Fair Side Of Half Brick Wall For Interi Or plastering up To Floor Two Level I/c Internal Rounded Angle Chamber and Or Rounded Angle Not Exceeding 80mm in grith And Finished Even And Smooth No Extra For Mixing Any Additive . As per S.I.No. 584 |
| 24 | 12 mm . Cement Plaster in 1:4 With Cement And CourseSand Mortar In Single Coat on Fair Side Of Half Brick Wall For Interi Or plastering up To Floor Two Level I/c Internal Rounded Angle Chamber and Or Rounded Angle Not Exceeding 80mm in grith And Finished Even And Smooth No Extra For Mixing Any Additive . As per S.I.No. 584 |
| 25 | Providing and laying vitrified floor tiles insizes of the 600mm x 600mm or more with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting thejoints with white cement and matching pigments etc., complete. as per DSR- 11.41.20 |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. D.S.R 8.31 |
| 27 | Grouting the joints of flooring tiles (600x600 mm) having joints of 3 mm width using eposy grout mix of 70 kg of orgnic coated filler of desired shade (0.18 kg of hardener and 0.20 kg of resin per kg) including filling/grouting and finishing complet as per direction of engineer-in-charge DSR 11.48.2 |
| 28 | 25 mm thickC.C.flooring in 1:2:4S I 601 |
| 29 | P/F of Glass Strips of 5.5 mm Thick and 3.5cm Depth in flooring i/c all complt.SI No 631(a). |
| 30 | Provision for supply and fixing of Oxidized fittings item 13 ,14,15 |
| 31 | Sand filling in plinth excluding supply of necessary quantity of sand from a distance not exceeding not exceeding 8km. From the site of work and including watering, ramming, dressing etc. rate to include cost of all materials, labour and T&P etc. required for proper completion of the work. (Labour and Material) for Raising of floor Level |
| 32 | S/F of flush door commercial quality confirming two I.S. 2202 part-1 (1983) 40mm thick etc. complete. |
| 33 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windowsall complete with4mm thick glass panes.as per DSR No. 10.30.1 |
| 34 | White washing three coat with white lime or undecorated wall surface in three coat to give even shade i/c throughly brooming the surface to remove all dirt ,dust mortar dropsand other foreign matter as per S.I.No.673 |
| 35 | Providing and applying white cement based putty of average thickness 1 mmof approved brand and manufacturer, over the plasterdwall surface even and smooth surfaceas per DSR - 13.80. |
| 36 | One priming coat and two coat of oil bound distemper on new work including the supply of all materials, labour and T&P etc. required for proper completion of the work as per SI No. 649 & 650. |
| 37 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per DSR - 13.47.1 |
| 38 | Painting or Varnishing new iron work in small areas of new wood work with two coat of ready mixed priming paint and one coat of approved superior quality ready mixed enemal paint of varnish including sand papering , rubbing and cleaning the surfaceand s/o all materials, labour and T&P etc. as per Sl.No. 641 & 642. |
| 39 | PVC.Pipe pressure 6kg/cm² of 110 mm dia |
| 40 | White Galzed Earthan Ware Full Basin Padestal S.I.No. 17 Chapter - 22 |
| 41 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I. brackets 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid D.S.R No- 17.3.1 |
| 42 | Providing and fixing P V C WATER TANK1000 LTS |
| 43 | Supply & Fixing Mirror Of Atul Make With Indian Polish Of 600X450mm Dia Size With Bevelled Edge.(S.O.R Chapter No . 22 S.N. 14) |
| 44 | Providing and fixing of 40 mm dia Semi Rigid PVCwaste pipefor sink or wash basin including PVC. waste fittings complete. As per DSR-17.28.1.2 |
| 45 | Providing and fixing 600 x 20 mm C.P. brass towel Road complete with brackets fixed to wooden cleats with CP brass screws as per DSR 17.73.2 |
| 46 | Providing and fixing of 15 mm dia nominal bore G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. exposed on wall.as per DSR - 18.10.1 |
| 47 | Providing and fixing of 25 mm dia nominal bore G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. exposed on wall.as per DSR - 18.10.3 |
| 48 | Providing and fixing of CP brass 15mm dia nominal bore brass bib cock of approved quality conforming to Ch 21 S.NO 52 |
| 49 | Providing and fixing of 15 mm dia nominal bore brass stop cock of approved quality as per Ch 21 S.No61 |
| 50 | Providing and fixing of C.P. brass PILLARS COCK of approved quality with 15 or 20 mm nominal bore as per Ch 21 SNo 57 |
| 51 | Supply and Fixing Inauguration/ Shilanyas stone granite polished size of 600x900x20 mm with including letter, painting, groveeing of letters and filling of letter with golden varnish and cartage in all respect at site etc completion of all work (Only for estimating purpose ) and photography |
| 52 | Supply & fixing of informatery sign board 90x120cm size & 3.0m long made with iron 40x40x5 mm 18 gauge MS sheet & braud with flat iron 35x5 including two coat painting with red oxide cartage up to stone complete with all labours material & T& P as per standard design & drawing supplied by department. |
| 53 | Wiring point for light with 1.5 sq. mm. FR PVCinsulated multistrand copper conductor cable in heavy gauge rigid steel conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continity wire, piano type switch & ceiling rose /angle /batten holder on 3 mm thick phenolic laminated backlite sheet etc. complete in all respect as directed including matching colourwahas per Sl. No. 131 ( c ) |
| 54 | Wiring point for fan/ fresh air fan (light duty exhaust fan)with 1.5 sq. mm. FR PVCinsulated multistrand copper conductor cable in heavy gauge rigid steel conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continity wire, piano type switch & ceiling rose /angle /batten holder on 3 mm thick phenolic laminated backlite sheet etc. complete in all respect as directed including matching colourwahas per Sl. No. 133 ( c ) |
| 55 | Wiring point for plug with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable in heavy gauge PVC conduit pipe concealed in the wall complete with 14 SWG copper earth continuity wire piano type switch and socket etc. complete in all respects including matching colour wash etc. . as per Sl.No. 134 ( c ) |
| 56 | Supply and fixing ofbatten/ angle /holder complete in all respect as per SI No-.405. |
| 57 | Supply and fixing of 240V volts\" L\"series miniature circuit breaker 6Amp. To 32 Amp (10KA) in existing MCB. DB complete with connections as required as per Sl.No. 1002. CAT A |
| 58 | Supply and fixing of40 Amp. D.P. Isolator Cat A as per SI No. 1005(A) |
| 59 | Supply and fixing of8 ways SPN distribution board without MCB complete in all respect as directed at site by Engineer in charge as per SI No- 1024 CAT A |
| 60 | Supply and fixing of power plug with 15 A / 250 V flush type switchand 3 pin 15 A / 250V flush type socket in suitable M.S. box of 175 mm x 100 mm x 50 mm size switch backlite sheet cover3 mm thick fixed with brass machine screws and cup washer as per Sl.No. 1139 |
| 61 | Supply and wiring of submain with 2 numbers 2.50 sq. mm. FR PVC insulated 1100 V multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with one number 1.50 sq.mm FR PVC insulated 1100 V grade multistrand single core copper copper conductoras earth continuity wire as per SI.No. 1304(c) |
| 62 | Supply and erection of AC 1200 mm sweep ,230/250 Volts , 50 Hz ceiling fan with regulatorstandard down rod , blades including connection etc. complete as requred. |
| 63 | Erection and testing of ceiling fan and regulator for room height upto 3.50 mtr including supply of 3 mm thick G.I. down rod 19 mm dia duly painted complete in all respect as per Sl.No. 1116 |
| 64 | Supply and Fixing L.E.D. Light |
| 65 | P/F Electrificaion work Load 2 kilo watt @ 5000 per Kilowatt estimating purpose only |
| 66 | Supply and Fixing of Power Cable |
| 67 | इंडिया मार्का -II हैण्ड पम्प अधिष्ठान कार्य हेतु आवश्यक सामग्री की आपूर्ति,इंडिया मार्का -II हैण्ड पम्प कम्प्लीट सेट | |
| 68 | पी०वी०सी० पाइप 110 मिमी 6 किग्रा / घन सेमी |
| 69 | पी०वी०सी० पाइप 63मिमी 6 किग्रा / घन सेमी |
| 70 | 63 मिमी स्ट्रेनर सप्लाईड पाइप सहित | |
| 71 | पी०वी०सी० रिडुयसर 110 x 63 मिमी |
| 72 | 32 मिमी व्यास कि मीडियम क्वालिटी की जी0आई0 पाइप | |
| 73 | हैण्ड पम्प कम्पलीट सेट जीआई पाइप काम्पक्टिंग रॉड ,110 /63 मिमी पीवीसी पाइप ,स्ट्रेनर एवं सम्पूर्ण प्लेटफार्म ,सामग्री आदि कि कार्यस्थल तक ढुलाई ,लोडिंग एवं अनलोडिंग सहित समस्त कार्य | |
| 74 | पम्प एंड प्रेशर विधि द्वारा 150 मिमी व्यास का छिद्रण कार्य हेतु यन्त्र /संयंत्र का किराया एवं कार्यस्थल तक ढुलाई ,लोडिंग एवं अनलोडिंग सहित समस्त कार्य ,गड्डे की खुदाई इत्यादि खड़ा करने कार्य स्थल तक ढुलाई इत्यादि कार्य श्रमिक सहित | |
| 75 | पम्प एंड प्रेशर विधि द्वारा 150 मिमी व्यास की बोरिंग , छिद्रण कार्य , बोरिंग हेतु यंत्रो की व्यवस्था , समस्त टी एंड पी एवं श्रमिक सहित |0 -15 मी० |
| 76 | 15-30 मी० |
| 77 | 30 -45 मी० |
| 78 | 150 मिमी बोर होल में सप्लाईड पाइप 63 मिमी रिज स्क्रीन स्ट्रेनर ,63/110 मिमी 6 किग्रा /घन सेमी पीवीसी असेंबली की लोअरिंग कार्य समस्त टी एंड पी श्रमिक सहित | 0 -45 मी० |
| 79 | 150 मिमी के बोर होल में पीवीसी लोअरिंग के समस्त स्ट्रेनर के चारो ओर कोर सैंड(पैकिंग )कार्य ,सामग्री की आपूर्ति श्रमिक सहित समस्त कार्य | |
| 80 | पम्प एंड प्रेशर विधि द्वारा बोरिग कार्य हेतु आवश्यक बेंटोनाइट की आपूर्ति एवं भराई का कार्य श्रमिक सहित | |
| 81 | इंडिया मार्का -II हैण्ड पम्प का अधिष्टानकार्य ,आवश्यक श्रमिक एंड टी एंड पी सहित इंजीनियर इंचार्ज कि संतुष्टि के अनुसार | | |
| 82 | हैण्ड पम्प का अधिष्टान के बाद बालू सहित भराई तक विकास कार्य| |
| 83 | विकास कार्य के बाद डिस्फ्रोक्सन कार्य सामग्री सहित | |
| 84 | डिजाईन के अनुसार 1:2:4 मिक्स (सीमेंट ,कोर सैंड ,स्टोन ग्रिट )की कंक्रीट से ग्राउटिंग (76 X 76X40 सेमी के साथ हैण्ड पम्प के प्लेटफार्म का निर्माण कार्य सामग्री ,टी एंड पी ,श्रमिक सहित | |
| 85 | P/ F SUBMERCIBLE PUMP |
