|
| 1 | SCHEDULE A PART I (B/R WORKS)Demolition of brickwork or stone/ boulder masonary, built in cement mortar including all quoins, arches, pillars etc, including stacking of servisable bricks and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed. |
| 2 | Material and labour for steel work as in main and cross beams, hip, jack, rafters , purlins, posts , Plate girder or single stanchions, builtup of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections etc confirming to Fe-410-W(Gde- E-250) quality- B complete all as specified and directed. |
| 3 | M&L brick work with sub class \"B\" bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 75 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified and directed. |
| 4 | Taking down cementplaster of any description on brick wall surfaces etc including raking out joints hacking for key , scrubbing down down with water etc and removal of debries to distance exc 250mtr complete all as specified and directed. |
| 5 | M&L rendering 15mm thick CM 1:4 on fair face of brick over concrete surface finished even and smooth witout using extra cement complete all as specified and directed. |
| 6 | M&L rendering 10 mm in cement mortar 1:3 on fair faces of brick /concrete surface of ceilling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 7 | Dismantling floor,hearth or wall tilling including cement mortar bedding (but not backing ),removing serviceable tiles to store and rubbish off premises and removal of debries to distance exc 250mtr complete all as specified and directed. |
| 8 | M & L 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregates for sub floors and sub bases for filling undulation under floor tiles or other similar complete all as specified and directed. |
| 9 | M&L for first quality non skiddigital coloured cermaic jointless tiles 7 to 8mmthick (squared or rectangular ) area of each exc 0.18sqmbut not exc 0.36 sqm asin floor set and jointed in neat cement slurry and pointed in coloured cerment to match, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 10 | M&L for first quality non skidHD Polishedcoloured cermaic jointless tiles8 to 10 mmthick of size 600mmx 1200mmasin floor set and jointed in neat cement slurry and pointed with coloured Epoxy groutto match, over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed . |
| 11 | M&L for Glazed HD Polishedcoloured cermaic jointless tiles8 to 10 mmthick of size 600mmx 1200mmasin vertical surfaces / dadoand jointed in neat cement slurry and pointed with coloured Epoxy groutto match, over and including 10 mm thick renderingin cement mortar (1:4) complete all as specified and directed . |
| 12 | Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre andnot exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. |
| 13 | Taking down chowkats or frames with shutter, areanot exceeding 1.50 Square metre(w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfacesin CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. |
| 14 | S& F 12 mm thick toughened frosted Glass as in door Shutter/ Partitions with dust proof Polyethlyene strips 15 mm wide including making frosting/itchingof glass with logo or other designsas approvedcomplete all as specifiedand directed. |
| 15 | S&FOverpanel patch with fixing plate of size 164mmx51mm made of stainless steel ( grade SS 304 ) suitable for toughned glass doors / partitions complete all as specifiedand directed. |
| 16 | S&F Toppatch of size 164mmx51mm made of stainless steel ( grade SS 304 ) suitable for toughned glass doors / partitions complete all as specifiedand directed. |
| 17 | S&F Bottompatch of size 164mmx51mm made of stainless steel ( grade SS 304 ) suitable for toughned glass doors / partitions complete all as specifiedand directed. |
| 18 | S&F Patch lockof size 164mmx51mm made of stainless steel ( grade SS 304 ) suitable for toughned glass doors / partitionscomplete all as specifiedand directed. |
| 19 | S&F in repair Floor Springof size 256 x 105x50 mm with Euro Profile Cylindermade of Brass with chromium platedsuitable up tofor max width 950 mmtoughned glass doorscomplete all as specifiedand directed. |
| 20 | Supply only door closure Aluminium Extruded section hydraulically regulated designation No 03 universal type , suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specifiedand directed. |
| 21 | S & F door stopper of brass body and tongue with hard drawn steel spring with150 mm cover plate complete all as specifiedand directed. |
| 22 | Supply and fixing 30 mm thick flush door shutter of fiber glass reinforced plastic (FRP) in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specifiedand directed. |
| 23 | S&F 600mm Brass skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt and fixed with brass screws complete all as specifiedand directed. |
| 24 | S&F 375mm Brass skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt and fixed with brass screws complete all as specifiedand directed. |
| 25 | S&F 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed with brass screws complete all as specifiedand directed. |
| 26 | S&F in repairfancy Stainless Steel handles 150 mm size for door Shutters and fixed with brass screws complete all as specifiedand directed. |
| 27 | S&F of fixingGI OREO Metal Suspended ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece complete all as specifiedand directed. |
| 28 | S&F5-8mm thick solid/ Hollowprofile designer PVC paneling with panel of width 250mm to 300mm fixed to wall/ceiling with screw and rawel plugincluding PVC beading (U,L section)wherever required complete all as specifiedand directed. |
| 29 | Supply and fixing in repair double action floor door spring hydraulically regulated made up minimum1.25 thick aluminium alloy sheet foundation box, man body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specifiedand directed. |
| 30 | Demolition of stone slabs of any description or thickness in roof, floors,suspended slabs ,chajjas etc,laid bedded and pointed in any mortar and removal of debries to distance exc 250 mtr complete all as specifiedand directed. |
| 31 | Demolition of reinforced cement concrete of any description in chajjas, parapet wall and similar suspended work including cutting of reinforcement and removing to outside MoD land complete all as specified and directed. |
| 32 | M&L formwork to soffits of suspended slab such as roof slabs, floor slabs, landings, chajjas and similar work n.exc 200mm thick horizontal or sloping rough finished flat surfaces complete all as specified and directed. |
| 33 | M&L formwork to edges of concrete flats, treads, slabs, floor and roofs n.exc 20cm wide and sides of RCC/PCC bends in walls, horizontal or sloping, chajjas and similar work exc 10cm but n.exc 20 cm wide rough finished flat surfaces complete all as specified and directed. |
| 34 | S&F mild steel deformed TMT bars 8 mm dia and overcut to length & bent to shape required including cranking bending spirally for hoping for column, hooking ends & binding with mild steel wire not less than on 0.9 mm dia or securing with clips complete all as specified and directed. |
| 35 | M&L reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in chajjas upto any height complete as specified and directed. (Reinforcement shall be be measured separately). |
| 36 | M&L forgranite stone slab 18 to 20mm thick as in kitchen plateform / flooring/ wash basin counters laid over adn including 20 mm thickscreed bed in cement mortar 1 :6 and jointedand pointed with cement mixed with pigment to match the shade of stone including cutting opening ( of any shape and size ) , cutting,rubbing and polishing surface and rounding of edges and as any colour as approved completed all as specified and directed. |
| 37 | M&L for granite stone slab 18 to 20mm thick as in vertical surfaces over a 10 mm thick rendering with cement mortar 1:4and jointedand pointed with cement mixed with pigment to match the shade of stone including cutting rubbing and polishing surface and rounding of edges and as any colour as approved completed all as specified and directed. |
| 38 | S&F 10 mm thick Looking mirror of selected quality cabinet typeincludingconnected features likes capston Screws etc complete all as specified and directed. |
| 39 | S&F table topvitreous chinaware wash hand basin light colour/white of size 565x420x140mm , brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets,32mm bore PVC waste pipe of appropriate length ilcluding taking out of old WHB & making necessary connections complete all as specified and directed. |
| 40 | Supplying and fixing in repair single lever basin mixer ( hot & cold water ) with pop up waste system & 450 mm long braided & making necessary connections complete all as specified and directed. |
| 41 | S&F in repairangular angle/ stop cock, long body cast copper alloy,high pressure 15mm bore chromium plated with wall flange, screwed downboth sidefor iron pipe or for unions and fixed complete all as specified and directed. |
| 42 | S&F Rimless Single Piecevitreous chinaWC with UF soft close seat cover , Jet Spray ,Hinges , fixing Accessories and cistern fittings of size 360x675x750 mm including 300 mm \"S\" trap of PVC complete all as specified and directed |
| 43 | S&F in repair Health faucet with 1.5mm flexible chromium plated tube and hook fixed to angle valve complete all as specified and directed |
| 44 | S&Fin repair450 mm long PVC connection 15 mm bore with chrome platedbrassnutscomplete all as specified and directed |
| 45 | S& F stainless steel Towel Rail 600 mm long as approved Desingcomplete all as specified and directed |
| 46 | S& F corner glass shelfof approved design and pattern complete all as specified and directed. |
| 47 | S& F CP Paper holder without flapof approved design and pattern complete all as specified and directed. |
| 48 | S& F Soap Dishof approved design and pattern complete all as specified and directed. |
| 49 | S& F Towel Ringof approved design and pattern complete all as specified and directed. |
| 50 | S& F Soap Dispenser with glass bottle of approved design and pattern complete all as specified and directed. |
| 51 | S& F Tumbler Holder of approved design and pattern complete all as specified and directed. |
| 52 | M&L cutting chases pining in concrete surfaces and making good to facing where required and pointing in cement mortar1:3 to ends or edges of landings steps, cills, sun shades slabs not exc 10cm girth complete all as specified and directed. |
| 53 | S&F in repair CIfloor trap( long nose) 75mm bore with grating including Jointing to waste pipe fixed in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and directed. |
| 54 | S&F CP grating 125mm dia circular of approved make and fixing with cement mortar 1:3 as in repaircomplete all as specified and directed. |
| 55 | Supply and fixing in replacement of 110mm dia uPVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, fixed to walls including dismantling of old pipe as existingand removal from site complete all as specified and directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985. |
| 56 | All as per item No 55 above but 75mm bore. |
| 57 | S&F of PVC (SWR) bends 110mm dia, complete all as specified and directed. |
| 58 | S&F of PVC (SWR) bends 75mm dia, complete all as specified and directed. |
| 59 | S&F of PVC (SWR) reducers 110mm dia, complete all as specified and directed. |
| 60 | S&F PVC (SWR) junction single (single Tee) equal or unequal 110mm dia complete all as specified and directed. |
| 61 | S&F PVC (SWR) junction single (single Tee) equal or unequal 75mm dia complete all as specified and directed. |
| 62 | S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed. |
| 63 | Labour only for Modular cabinet with all fittings/ fixtures hinges, telescopic channel, handles etc. and including manufacturing of all cabinet made of 18mm thick celluka PVC board plain/ prelaminated colour PVC board and fixing the items fitted in position icluding cost all fasteners like screws, adhesives and nut and bolts in all as per space available at site complete all as specified and directed by engineer in charge and comprising of following :-i) Wire basket bottle rack- 2 Nosii) Wire basket cuttlery box- 2 Nosiii) Wire basket grain trolly- 2 Nosiv) Wire basket plate rack- 2 Nosv) Wire basket cup and saucer rack- 2 Nosi) Plain Wire basket different patterns- 10 NosNotes: a) All the above said accessories such as celuka ply, baskets, hinges, handles, ball bearing shall be measured and paid separately as supply only under respective items.b) The qty against item no 64 to 83 may vary being measurable items and nothing plus/ minus shall be paid if the quantities are varied while execution on ground.c) The mode of measurement for the said item shall inclusive of all fixing, screws, nut, bolts, adhesives etc. used to fabricate the said cabinet and fix in position and measured as for each for one complete. |
| 64 | Supply only 18 mm thick Celuka Ply of plain colour Sheet for kitchen cabinets sides , top , bottoms and shelves inside the cabinet complete all as specified and directed. Make:- Rajshree or equivalent of makes as specified in tender documents. |
| 65 | Supply only 18 mm thick Celuka Ply of one side prelam/Rigidlam and other side plain whitecolour to make kitchen cabinet shutters / drawer complete all as specified and directed. Make:- Rajshree or equivalent of makes as specified in tender documents. |
| 66 | S&F Auto closes hinges forcabinet shutters complete all as specified and directed. |
| 67 | S&F Ball bearing runners 45 mm telescopic Channel ( 20 inch) Full Extention Load capacity 50 kgs complete all as specified and directed. |
| 68 | S&F Stainless Steel handles 100 mm size for Cabinet Shutters complete all as specified and directed. |
| 69 | S&FStainless Steel handles 150 mm size forCabinet Shutters complete all as specified and directed. |
| 70 | S& F Back To Back Pull Handles Dia. 25 mm, CTC Length 200, End to end 300, Stainless Steel Satin Finish ( grade SS 304 ) suitable for toughned glass doors complete all as specified . |
| 71 | S & F brass magneticcatchercomplete all as specified and directed by Engr-in-Charge. |
| 72 | Supply Only 18 mm thick Celuka Ply of density 600kg/cum of plain colour Sheet for kitchen cabinets sides, top, bottoms and shelves inside the cabinet complete all as specified and directed. Make:- Rajshree or equivalent of makes as specified in tender documents. |
| 73 | Supply Only 18 mm thick Celuka Ply of density 600kg/cum one side prelam/Rigidlam (Colour/Shade as approved by GE) and other side plain white colour to make kitchen cabinet shutters / drawer complete all as specified and directed. Make:- Rajshree or equivalent of makes as specified in tender documents. |
| 74 | Supply Only Auto closes clip on cabinet hinges (regular) for kitchen cabinet shutters complete all as specified and directed. Note : Each pair means one piece fixed on openable shutter and other piece fixed on fixed portion. |
| 75 | Supply Only Ball bearing drawer channel telescopic type (500mm) Full Extention Load capacity mininum 50 kgs complete all as specified and directed. Note : Each pair means 2 nos of telescopic channel, one piece fixed on left side and another piece fixed on right side. |
| 76 | Supply Only Stainless Steel (SS 304) handles 100 mm size for Kitchen Cabinet Shutters complete all as specified and directed. |
| 77 | Supply Only CP Stainless Steel (SS 304) Wire basket two shelf pull out (bottle rack) of size 150 x 485 x 430 mm complete all as specified and directed. |
| 78 | Supply Only CP Stainless Steel (SS 304) Wire basket (Cuttlery Box ) size 420x 485x 100mm complete all as specified and directed. |
| 79 | Supply Only CP Stainless Steel (SS 304) Wire basket (Grain Trolly ) size 425 x 495x 350 mm complete all as specified and directed. |
| 80 | Supply Only CP Stainless Steel (SS 304) Wire basket (Plate rack) size 420x 485x 150mmcomplete all as specified and directed. |
| 81 | Supply Only CP Stainless Steel (SS 304) Wire basket (Cup and Soucer rack ) size 420x 485x 100mm complete all as specified and directed. |
| 82 | Supply only CP stainless Steel (SS304) plain Wire basket of size 420x485x100 mm complete all as specified and directed. |
| 83 | Supply only CP stainless Steel (SS304) plain Wire basket of size 420x485x150 mm complete all as specified and directed. |
| 84 | Material & Labour for Plain Cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed. |
| 85 | Supply and fixing in repair of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed. |
| 86 | All as per Item No 85above but 15mm bore. |
| 87 | Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled protion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc half brick wall but n exc full brick wall complete all as specified and as directed. |
| 88 | M&L Mild steel joist channel angle or tee sections fixed independently without connecting plates etc cut to ordinary lengths fe 410 (Gde-250 quality-B) including cuttinf drilling and welding as required at site complete all as specified and as directed. |
| 89 | SCHEDULE A PART II (E/M WORKS)Taking down carefully aluminum point wiring (light, fan, socket or power) complete fittings such as switches, C/roses, Pendants DBs, sockets etc. including taking down carefully by unscrewing from boards/outlet/DBs/fittings such as switches, sockets, lamp holders, brackets, ceiling fittings bulkhead fittings, sketch fittings, tube light fittings, fan regulator, electric meters, meter box any type etc including making good the disturbed surfaces as per existing complete all as specified and directed. |
| 90 | Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLS-H, 1100 volts, ISI marked, PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 20mm dia and its fittings, including cutting chasing on wall/ceiling, including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes, ISI marked, including 1.5 sqmm single core PVC insulated and unsheathedFRLS-H cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dollywith and including MS flush boxes of 2 to 18 modules with inner and outer cover plates, confirming to IS 5139 of 1969 and IS 14772 of 2000 for fixing modular switch sockets for one light point (light point//fan point/bell point controlled by one one way switch complete all as specified and as directed.Notes :- (i) Switch, socket, ceiling rose, lamp holder, bell, bell push and fan regulators to be measured and paid for separately. The quoted rates are deemed to be included for providing cover plates and MS flush boxes as required at site.(ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only and surfaces shall be make good as per existing surfaces. (iv) The concealed conduits and MS boxes as fixed against new point wiring, shall be verified by JE/Engineer-in-Charge before making good the surfaces by plastering and other finishes. |
| 91 | (a) One light/bell/fan/exhaust point controlled by one switch 6 amp one way |
| 92 | (b) One 3 pin switch socket combination 6 amp on the independent board. |
| 93 | (c) One 3 pin switch socket combination on same board with other switches. |
| 94 | Description all as per serial item No.90.00 above, but with 2.5 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, for one socket point 15 Amps, 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed. |
| 95 | M&L switch modular type 6 Amp one way 1 module 230 volts complete all as sprecified and as directed. |
| 96 | M&L switch modular type 16 Amp one way 1 module 230 volts complete all as sprecified and as directed. |
| 97 | M&Lsocket modular 2/3 pin, 6 A one way 2 module 230 volts complete all as specified & as directed. |
| 98 | M&Lsocket modular 2/3 pin, 6/16 A one way 2 module 230 volts complete all as specified & as directed. |
| 99 | S&F ceiling rose 65x50mm three terminals complete all as specified & as directed. |
| 100 | Supply and fixing ofModular fan Regulator step type2 module complete all as specified and directed by Engg in Charge. |
| 101 | Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Havells, Crompton, Bajaj |
| 102 | Supply and fixing LED batten fitting 10-12 watt, 2 feet, aluminium housing with electronic driver including tube rod 10/12 watt cool/warm typeindustrial model complete,connecting with copper conductor flexible cablefrom ceiling rose to connector of the lightas in repaircomplete all as specified and as directed by the Engineer-in-Charge. |
| 103 | Supply and fixing in replacement LED tube light fitting1x18 watt, 230 volts in commercial channel with powder coated CRCA sheet housing with opal diffuser for LED with LED tubelight with high efficient LED in aluminium housing with clear & milky diffuser connecting with twin core twisted flexible copper conductor cable with suitable size rod complete with all accessories all as specified and directed. |
| 104 | Supply and fixing 18W Modern Electroplated brass gold body LED wall light mirror vanity picture lampwarm white complete all as specified and directed by the Eng-in-charge. |
| 105 | S&F9/12 watt LED light fitting wall mounting fixture (sketch type) including LED lamp compact and energy efficient epoxy powder coated luminaire and connecting with copper conductor flexible cablefrom ceiling rose to connector of the light complete including removing unserviceable light fittingscomplete all as specified and as directed by the Engineer-in-Charge. |
| 106 | Supply & fixing exhaust fans made of sturdy engineering plastic complete with louver/ shutter voltage 230 V, 50 Hz, RPM 1200, copper winding of sweep 250 mm complete all as specified and directed. |
| 107 | S&F MCBs 5 to 40 amp SPN B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI markedto be fixed on DBcomplete all as specified and directed. |
| 108 | All as per Item No 104above but in repair. |
| 109 | S&F MCBs 5 to 32 amp SP B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI markedto be fixed on DB complete all as specified and directed. |
| 110 | All as per Item No 106above but in repair. |
| 111 | S&F in repair sheet metal MCB DBs06 way with 200 Amps rated bus bar single pole and neutral with acrylic double door IP-43 fixed on wall duly grouted in solid block, including copper lugs/thimbles duly crimped for connection complete. Cat part No.811825 of make Indo Asian or equivalentin make given in Appx \"B\" |
| 112 | Supply & laying sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 4 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI markedmulti stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall and surface on ceiling in PVC conduit medium gradeISI marked of adequate size for housing the wirescomplete all as specified and as directed by the Engineer-in-Charge. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.(ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 113 | All as per Item No 109above but in repair. |
| 114 | Material and labour forEarthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore GI pipe (light grade)for protection of earthing lead, 20 mm bore (medium grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 in pit base and 50 mm thick RCC 1:2:4 type B-1, reinforced with XPM (weight not less than 3 KILOGRAM/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009) complete all as shown on drawings and as specified and directed by Engineer-in-Charge.Note : The unit rate includes for protecton pipe 15mm and GI earth wire 4mm from top of earth plate upto 7.50 metre above ground level. |
| 115 | Supply & fixing fixing LED flat panel 2\"x2\" size fully difused surface/ recess mounted fitting (grid/ gypsum type) 36-40watt, 5700K, warm/ cool white with powder coating and CRCA front cover including frame with provision of PVC flexible copper conductor cable from ceilling rose to light fitting complete all as specified and as firected by Engr-in-charge. Cat part No VENUSNEO2X2PLR36WLED857G2 of make Havells or equivalent in make given Appx \"B\" |
| 116 | Material & labour for fixing of plywood grad BWR, type BB of thickness 4mm fixed with screw on wall for closing of opening in wall existing surface complete all as specified and directed. |
| 117 | Taking down exhaust fan of any size or capacity and deposting in MES store yard complete all as specified and firected by the Engir-in-charge |
| 118 | Supply and fixing heavy duty wall mounting fan 400mm sweep iwth corrosion resitant PVC body, minimum noise, operation and maintenence free design totally enclosed, highly efficient heavy duty motor with pressure die cast aluminium rotar mounted on two ball bearings, aerodynamically contoured blades, gigid frame, 1400 RPM, PVC blades and testing complete all as specified and as directed. |
| 119 | S&F sheet metal MCB DBs08 way with 200 Amps rated bus bar single pole and neutral with acrylic double door IP-54 fixed on wall duly grouted in solid block, including copper lugs/thimbles duly crimped for connection complete. Cat part No.811825 of make Indo Asian or equivalentin make given in Appx \"B\" |
| 120 | Note:-Amount of credit ofRs.2855.00 for retrieved materials is mentioned in Schedule of Credit Page No. 17 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
