Tender For Addition / Alteration To Officers Mess And Living In Accommodation At Afs Jalahalli, Jalahalli-Karnataka

TDR : 45328219

Tender Notice
Corrigendum Details
BOQ

Expired

Jalahalli , Karnataka

Tender Brief : Corrigendum : Tender For Addition / Alteration To Officers Mess And Living In Accommodation At Afs Jalahalli

Document Fees
₹ 2000 /-

EMD
₹ 424400.0 /-

Tender Value
₹ 3.49 Crore /-

Submission Date
28-10-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	21-10-2024	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	28-10-2024

NAME OF WORK :ADDITION / ALTRATION TO OFFICERS MESS AND LIVING IN ACCOMODATION AT AFS JALAHALLI

Sl. No.	Item Description
1	Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out in hard/dense soil,returning, filling in and ramming earth or broken rubble mixed with erth ground, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface and all as specified and directed.
2	Surface excavation not exceeding 30cm deepand averaging 24 cm deep and getting out in soft soil, complete all as specified and directed.
3	Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m deepand getting out in hard/dense soil, all as specified and directed.
4	Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m deepand getting out in soft/loose soil, all as specified and directed.
5	Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil obtained from excavation, all as specified and directed.
6	Removing excavated material not exceeding 50m and depositing where directed at a level n exc. 1.5 m above the starting point, all as specified and directed.
7	M&L for broken stone boulders hard core of guage n.exc 63mm deposited spread and level laid in layers n.exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
8	M&L for Sand filling under floors or in foundations including watering and consolidation and all as specified and directed.
9	M&L for cement concrete 1:4:8 type D-2, (using 40mmgraded stone aggregates) filling in foundation and mass concrete, complete all as specified and directed.
10	M&L for Cement concrete 1:3:6 type C2 (using 40 mm graded stone agg) as filling infoundationand for mass concrete, complete all as specified and directed.
11	M&L PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in hold fast,all as specified and directed.
12	M&L for Plain cement concrete 1:2:4 type B1 using 20 mmgraded stone aggregate as in copings/benching of manholes including weathering rounded/ chamfered angles and throating as directed including necessary form work, all as specified and directed.
13	M&L Providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof,chajjas, coping, bed blocks and similar work including necessary form work, complete all as specified and directed.
14	Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitered / stopped ends, all as specified and directed.
15	M&L for Pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in CM 1:4 as in cover slab including all necessary form work, all as specified and directed.
16	M&L for reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as inslabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, all as specified and as directed.
17	Cutting openings, through stone walls with proper care, for door, windowand other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks/stones, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and as directed.
18	M&L pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exceeding 10cm in width and set in cement mortar 1:6 complete all as specified and directed.
19	S&F in repairs frame work and shutters of the cabinets including drawer fascia/sides /bottom, shelves etc. shall be made out of 19 mm thick marine plywood (of make like Green ply/Century Ply/ Kit ply or equivalent of grade) of boiling water proof and moisture resistant) with laminate of inside of 0.6 mm and outside 1.0 mm laminate of glossy finish of approved color incl Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.
20	M&L for formwork to slabs for flat smooth finished surfaces, all as specified and as directed.
21	M&L for TMT bars 10 mm dia or more cut to length bent to shape required including cranking, hooking ends etc and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, all as specified and as directed.
22	S&F ms round bars 10 mm dia and overFe 290 (Gde - E-165)cut to length bent to shape required including cranking, bending spirally, hooping for columns, hooking ends and all as specified and directed.
23	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement,complete all as specified and directed .
24	S&F MS bands straps, hold fast or small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified & directed.
25	M&L Rolled sections/rect tubes as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410W (GdeE-250) quality B, complete all as specified as directed
26	M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 250-w quality B, all as specified and directed.
27	Supply and fixing for tensile fabric roofing precontraint 702 S2-8604STransulucent white Balanco translucido made by approved make multilayer colposite material with special densely wooven low wick yarns 1100dtex PES HT anti capillary treated \"TERSUISSE\" standard in the base fabric of weight not less than 750 gms/ sqm confirming ENN ISO 2286-2 of standard with 250/267 cm with tensile strength 280/280 da N/5 cm confirming the EN ISO 1421 standard and tear strength 30/28 daN confirming to DIN 53.363 with adhesion 10/10 daN/5 cm confirming to EN ISO 2411 and finished with formula S2 floorinated varnish weldable with light transmission 13.5% in NFP 38511 including stretching fixing tying etc complete all as per specififed manufacturer instructions and directed.
28	S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc.including necessary cutting, drilling, welding etc and drilling holes notching for wires etc conforming to Fe-410- W(Gde- E-250) quality- B, all as specified and directed.
29	Supply only of chain link fencing MS galvanised sqaure wire mesh of size50mm X 50mm, dia of wire 4mm including line wires, to any type of standard rails, straining bolts, all as specified and directed.
30	Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc inlcuding provision of binding wire etc all as specified and directed.
31	S&F Flat iron welded or jointed in connection with framed work including securing bolts and all necessary drilling, bolting or reverting and similar work conforming to Fe-410-0, all as specified and directed.
32	S&F Mild steel screw bolts (machine made) dia of neck 16 to 20mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long, all as specified and directed.
33	M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed .
34	M&L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed .
35	M&L Second class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, complete all as specified and directed.
36	S&F Factory made frame single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and directed.
37	S&F factory made, Flush shutters 30 mm thick , solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified.
38	S&F factory made, Second class hardwood, 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamferedor rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats and all as specified and directed.
39	S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick moulded PVC prelam sheet on front face and 5mm prelam coloured PVC sheet on back face, complete all as specified and directed.
40	Resecuring or easing and adjusting wooden shutters of any description exceeding 1 Sqm but not exceeding2 Sqm each without taking down shutter, complete all as specified and as directed.
41	M&L for powder coated Anodised aluminium frame for doors, windows three track with skeleton window & glazed window , ventilators with one or more rebates including joining cleat for fixing etc,complete all as specified & directed.
42	Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. The rate includes Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories area not exceeding 2 Sqm each.The rate exclude the glass panes, complete all as specified & directed.
43	M& L for 4.5mm thick Anodised aluminium grill with 50mm opening(anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.
44	M&L for Anodised aluminium window and ventilator shutters for glass and stainless steel mesh, top hungwithout sash bar, aluminium section weighing 0.55 kg/m(minimum) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and make shutter ready for receive wire cloth/glass, complete all as specified and directed.
45	M&L for Anodised aluminium side hung door shutters, aluminium section weighing 0.55 kg/m(minimum) including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed.
46	Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames), complete all as specified and directed.
47	Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters(Without taking off shutters from the frames), complete all as specified and directed.
48	Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqmeach, complete all as specified and directed.
49	Taking down steel shutters windows / ventilators area not exceeding1 sqm each including all fittings and all as specified and directed.
50	Taking down steel shutters windows / ventilators area exceeding 1 Sqm but not exceeding 2 sqm each including all fittings and all as specified and directed.
51	S&F stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or serviceable fillets, complete all as specified and directed.
52	S&F fancy type Zinc material Maharaja Style handle Single Door 150mm, complete all as specified and directed.
53	S&F in repairsfancy type Zinc materialMaharaja Style handle 150mm , complete all as specified and directed.
54	S&F Floor door stoper of alumunium alloy body and tongue, aodised with hard drawn steel spring, 150mm size, complete all as specified and directed.
55	S&F 150 mm size Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
56	S&F 200 mm size Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
57	S&F 300 mm sizefancy type Zinc material Maharaja Style Sliding door bolt, complete all as specified and as directed.
58	S&F125 mm size Aluminium handles, cast type, anodised complete all as specified and as directed.
59	S&F150 mm size Aluminium handles, cast type, anodised complete all as specified and as directed.
60	S&F 100 mm long Stainless steel Butt hinges extruded complete all as specified and as directed.
61	S&FF 125 mm long Stainless steel Butt hinges extruded complete all as specified and as directed.
62	S&F in repairs auto closing hinges 15-24mm of 0 Crank (KH-001) with an opening angle of 110 degree for kitchen cabinet, all as specified & directed.
63	S&F in repairs ball bearing runners Channel length 400-500 mm soft closed telescopic channel full extension load capacity 35 kgs, all as specified and as directed.
64	S&F in repairs stainless steel handles 150 mm size for kitchen cabinet shutteres, all as specified and as directed.
65	S&F stainless steel anodised G Profile handles 14 inches size for kitchen cabinet shutteres of 19mm, all as specified and as directed.
66	S&F Chromium plated stainless steel wire basket (Storage Basket)pull out type for large utensils size 480 x 500 x 150 mm of grade 304 incl neccessary fittingsincluding all accessories, all as specified and as directed.
67	S&F Chromium plated stainless steel wire basket (Cup and Saucer basket )pull out type for large utensils size 356 x 508 x 100 mm of grade 304 incl neccessary fittings, including all accessories, all as specified and as directed.
68	S&F Chromium plated stainless steel wire basket (Plate/Thali Basket)pull out type for large utensils size 356 x 508 x 200 mm of grade 304 incl neccessary fittings including all accessories, all as specified and as directed.
69	S&F Chromium plated stainless steel wire basket (Perforated Cutlery Basket)pull out type for large utensils size 356 x 508 x 100 mm of grade 304 incl neccessary fittings including all accessories, all as specified and as directed.
70	S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish orelectrogalvanised, all as specified and as directed.
71	S & F 140mm ball catches with 8 mm dia steel ball, and brass body and striking plate including letting, all as specified and as directed.
72	S& F of Door Seal (40 mm Width ) as required Gate Bottom Sealing Strip Draft Excluder Stopper with Aluminium Plate & Nylon Bristles for Weather Stripping, Air & Sound Blocking, all as specified and as directed.
73	S&F door closer Alumunium die cast body hydraulically regulated, designation No. 3 universal type, suitable for door shutter complete all as specified and directed .
74	S & F in repair double actionfloorspringhydraulically regulated made up ofminimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steelcover, governingpivot madeofbrass,other parts made of mildsteelheavydutyandfixed complete all as specified anddirected.
75	Taking down defective aluminium door with glass panes and repairing floor stopper, bearing alignment etc. including replacement of any item required for proper functioning and refixing in the same position.
76	S&F in repairs brass mortise lock (4 levers), vertical type, size 100mm long, complete all as specified and directed .
77	M &L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions, all as specified and directed .
78	M&L for 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. Wire mesh. The ceiling may have sunk and raised moulding,complete all as specified and as directed
79	M&L for machine pressed pre polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over sand cusion with grey cement and no pigment and all as specified and directed.
80	Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises all as specified and as directed.
81	Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc all as specified and as directed.
82	M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with white cement and pigment, set, jointed and pointed in neat cement slurry in floors all as specified and as directed
83	M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match shade all as specified and as directed.
84	M&L for Virified Ceramic tiles light shade 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed
85	M&L for Virified Ceramic tiles light shade 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed
86	M&L forceramic coloured tiles of size 300x600mmx8mm thick, on verticals surfaces, set and jointed inneat cement slurry and pointed in coloured, complete all as specified and as directed
87	M&L forexterior wall tiles ofon verticals surfaces area not exceeding 0.36 Sqm, set and jointed inneat cement slurry and pointed in white cement with colour pigment to match the shade, complete all as specified and as directed
88	M&L for75 mm thick cement concrete 1:3:6 type C-2 (using 40mmgraded stone aggregates) finished fair and even complete all as specified and as directed.
89	M&L in repairs granite 18 to 20mm thick (table rubbed and polished) in steps, Jamps, Pillars,Windows,cills,platforms with cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) all as specified and as directed.Note : (i)The Unit rate quoted is included for Demolition of Stone Slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar(ii) The unit rate is deemed to be included for rounding to edges of stone slabs.
90	M&L in repairs sadrahalli stone18 to 20mm thick (table rubbed and polished) in steps, Jamps, Pillars, Windows, cills, platforms with cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) all as specified and as directed.Note : (i)The Unit rate quoted is included for Demolition of Stone Slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar(ii) The unit rate is deemed to be included for rounding to edges of stone slabs.
91	M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar, 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
92	M&L for removing existing water proofing treatment membrane and concrete on roof, clean with pressure water and wire brush to remove all the waste particles and laid to slope with 20mm cement concrete 1:2:4 (using12.5mm aggregate) and applying NITOPRIME AW primer( make - FOSROC ) and three coats of brushbondroof guard with different color as per manufacturer specifications and instructions. Note : (i)The ratio of mixing based on the manufacturer.(ii) The primer and roof guard coats may changed according to the manufacturer and approval from GE. (iii) The time between two different coats to be maintained as per manufacturer instructions.d) The work shall be carried out through authorized and qualified applicators of the following manufacturers .Make : FOSROC or equavalent in M/s Asian paints / STP / Sika / Pidilite(Dr.Fixit)
93	S&F Figured glass ordinary quality 3 mm thick, in squares not exceeding0.50 Sqm in each pane including oil putty or with existing metal beadings complete,all as specified and directed.
94	S&F 4mm thick figured/filmed glass, ordinary quality and glazing including oil putty in square not exceeding 0.5 Sqm in each pane and all as specified and directed.
95	S&F 10mm thick figured toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required and all as specified and directed.
96	M&L for 20 mm thick screed bed in cement mortar 1:4 for layingfloor finishes under floor all as specified and as directed.
97	M&L for 15 mm thick screed bed in cement mortar 1:4 for layingfloor finishes under floor, all as specified and as directed.
98	M&L for rendering 15mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces as in backing coat, all as specified and as directed.
99	Taking down cement plaster on walls any description incl raking out joints, hacking for key and scrubbing down with water etc, all as specified and as directed.
100	M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, all as specified and directed.
101	M&L for rendering 15 mm thick in CM 1:4 on fair faces of PCC/brick work/stone msny finished even and smooth without using extra cement, all as specified and directed.
102	M&L for rendering 10mm thickin CM 1:4 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement, all as specified and directed.
103	M&L for rendering in 15 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces, finished even andsmooth without using extra cement complete all as specified & directed.
104	M&L for two coats of washable distemper oil emulsionon new wall surfaes over a coat of alkali resistant priming paint (white or tinted) incl 3 mm thick wall care putty on wall all as specified and as directed.
105	M&L for two coats of washable distemper oil emulsionon new ceiling surfaes over a coat of alkali resistant priming paint (white or tinted) incl 3 mm thick wall care putty on wall all as specified and as directed.
106	M & L for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence salts trading oil and greasy spots etc by applying one coat of white wash on walls, all as specified and as directed.
107	M & L for preparation of old surfaces of ceiling including scrapping down, smoke soot, efflorescence salts trading oil and greasy spots etc by applying one coat of white wash onceiling,, all as specified and as directed.
108	M&L preperation of newly plastered surface of ceiling of any description and applying two coat oil bound distemper over one coat primer overcomplete all as per specfied and directed.
109	M&L for old plastered sufrfaces and applying water proof cement base putty@ 300gm (undiluted) per sqm of average thickness 1mm over the putty surfacs the mechanical wall sander having mechanical vaccum mechanism with RPM not less than 1500, sanding pad of 240 girt or above to make the surface free from dust and applying two coats of exterior oil emulsion paint(weather coat) over one coat of exteriorwall care primer using airless spray technology with max two working pressure of 3300 PSI and capable of oprtating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying oil emulsion should be able to spray in hard to reach area and penetration of oil emulsion on the surface etc.By slilled labour as per following steps :-.(a) Mix the putty powder by adding water as per manufacturer instruction and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute.(b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute bwith a maximum pressure 3300 PSI.(c) Allow 6-8 hrs time to dry the putty surface.
110	M&L for Complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\"/9\" to make the surface free from dust , loose paint etc by skilled labour and applying water proof cement base putty@ 300gm (undiluted) per sqm of average thickness 1mm over the putty surfacs the mechanical wall sander having mechanical vaccum mechanism with RPM not less than 1500, sanding pad of 240 girt or above to make the surface free from dust and applying two coats of oil bound emulsion distemper over one coat of interior wall care primer using airless spray technology with max two working pressure of 3300 PSI and capable of oprtating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying oil emulsion should be able to spray in hard to reach area and penetration of oil emulsion on the surface etc.By slilled labour as per following steps :-(a) Mix the putty powder by adding water as per manufacturer instruction and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute.(b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute bwith a maximum pressure 3300 PSI.(c) Allow 6-8 hrs time to dry the putty surface.
111	M&L for new plastered sufrfaces and applying water proof cement base putty@ 300gm (undiluted) per sqm of average thickness 1mm over the putty surfacs the mechanical wall sander having mechanical vaccum mechanism with RPM not less than 1500, sanding pad of 240 girt or above to make the surface free from dust and applying two coats of exterior oil emulsion paint(weather coat) over one coat of exteriorwall care primer using airless spray technology with max two working pressure of 3300 PSI and capable of oprtating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying oil emulsion should be able to spray in hard to reach area and penetration of oil emulsion on the surface etc.By slilled labour as per following steps complete all as specified and directed.(a) Mix the putty powder by adding water as per manufacturer instruction and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute.(b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI.(c) Allow 6-8 hrs time to dry the putty surface.
112	M& L Preparationof old treated wooden surface exceeding 10 cm width and grith and applying one coat of synthetic enamel paint, all as specified & directed.
113	M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying one coat of synthetic enamel paint on old surfaces in any tint complete all as specified.
114	M&L Providing two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new steel surfaces and all as specified and directed.
115	M&L for preparation ofnew wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint in any tint over a coat of wood primer on new surfaces all asspecified and directed
116	S&F Rotational moulded polyethylene water storage tanks of storage 1000L (cylindrical vertical with closed top) hoisted and fixed in position incl tank nipple/adaptor wherever required all as specified
117	S&F Rotational moulded polyethylene water storage tanks of storage 500L (cylindrical vertical with closed top) hoisted and fixed in position incl tank nipple/adaptor wherever required all as specified
118	Taking down 15 mm dia steel water tubing including connections, all as specified and directed.
119	Taking down 20 mm dia steel water tubing including connections, all as specified and directed.
120	Supplying and laying of 20 mm dia, CPVC pipes SDR 11 & Plain CPVC SDR 11 concealed including elbow, tee, fta, mta and all fittings fixedon walls/ceiling or laying in floors, complete all as specified & directed.
121	Supplying and laying of 25 mm dia, CPVC pipes SDR 11 & Plain CPVC SDR 11 concealed including elbow, tee, fta, mta and all fittings fixedon walls/ceiling or laying in floors, complete all as specified & directed.
122	S & F in repairs 15 mm dia angular stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for cpvc pipe.
123	S&F(3-in-1) hot and cold water mixture control type brass body chromium plated with wall showerfor connections fixed to 15mmdia of bore pipesall as per cat part No (FLR-5281) of Make - Jaquar or equivalent in othermakes, all asspeicified and directed.
124	S&F brass chromium plated toilet paper holder recessed type, all as per cat part No (AHS-CHR-1551) of make - Jaquar or equivalent in other makes, all as specified and directed.
125	S&F brass chromium plated shower rose with or without swivel joints 125mm size, all as per catt part No (OHS-CHR-1603 & SHA-CHR-479L450) of make - Jaquar or equivalent in other makes and all as specified and directed.
126	S & F in repairs 20 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe, all as specified and directed.
127	S & F in repairs Bib taps cast copper alloy chromium plated with crutch handle screwed down screwed for cpvc pipe or for brass ferrule and fixed complete for 15 mm bore pipe, all as per cat part NO (EKO-CHR-33037) of make - Jaquar or equivalent in other makes, all as specified and directed.
128	S&F in Brass chromium plated 2-in-1 tap 15mm bore pipe for fixing of health faucet, all as per cat part No.(MQT-526A) of make - Jaquar or equivalent in other makes and all as specified and directed..
129	S&F 15mm bore fancy type single lever Basin mixer chromium plated cast copper alloy with capstain head, lonf scrwed shanks cat part No (OPP-CHR-15001PM) of jaquar or equivalent all as specified and directed.
130	S&F viterous china wash down water closet (Pedestral pattern) EWC (Combo type ) white including plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to \"P\" or \"S\" includingflush pipe & flushing cistern all as per cat part No (FNS-WHT-40751P180UFSMZ) of make - Jaquaror equivalent in other makes,all as specified & directed.
131	S&FWash basin, vitreous China thin rim table top basin including cutting for and pinning in ends of brackets or erecting stand incl supply and fixing of waste couplings,waste pipe all as per cat part No (JDS-WHT-25911) of make - Jaquar or equivalent in other makes,all as specified and as directed.
132	S&FVitreous China Urinals, sensored Half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, all as percat part No (CODE : URS-WHT-13255) of make - Jaquaror equivalent in other makes,all as specified & directed.
133	S&F Swivel Mirror 630x445 mm of selected quality glass all as per cat part No (AKP-CHR-35795) of make- Jaquar or equivalent in other makes, all as specified and directed.
134	S&FLooking mirror of required size beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and aluminum frame fixed to wooden piug with chromium plated brass screw & cup washer complete all as specified and as directed.
135	S&F of soap dish, vitreous China white of size 160x160x90mm, complete all as specified and directed
136	S&F PVC Mirror cabinet with single door, white, 40x17x75 cmcomplete all as specified and as directed.
137	S&FHealth faucet, chromium plated, with 1.5m pipe long pipe and for fixing to 15mm bore pipe, all as per cat part No (ALD-CHR-563) of make - Jaquar or equivalent in other makes,all as specified and as directed.
138	S&F in repair 3 tier sinks with one drainage board made of stainless steel 304 grade 1mm thick kitchen sink with plugs, washers and wastes; with stand made up of SS tubes duly fixed with bracings of overall size 2135mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed
139	S&FKitchen sink tap chromium plated finish type for 15mm dia bore of pipe, all as per cat part No (QQP-7347PM) of make - Jaquar or equivalent in other makes, all as specified and directed.
140	S&F75mm PVC (SWR) floor trap,plain with CP grating including jointing with solvent cement complete all as specified and as directed.
141	M&L for fancy type aluminium curtain rod fancy type outer dia 25mm with powder coated with alumium brackets of weighing 140 gms, complete all as specified and directed.
142	Dismantaling of cast iron / RCC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings, complete all as specified and directed.
143	S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor/walls with PVC clamps and saddles, complete all as specified and directed.
144	S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor/walls with PVC clamps and saddles, complete all as specified and directed.
145	S&F PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and as directed.
146	S & F PVC (SWR) bends of any radius with access door bore of pipe 110 mm complete all as specified and as directed.
147	S & F PVC (SWR)junction single(single T)equal or unequal with access door bore of pipe 75 mm bore complete all as specified and as directed.
148	S & F PVC (SWR)junction single(single T)equal or unequal with access door bore of pipe 110 mm bore complete all as specified and as directed.
149	S & F PVC (SWR) reducers 110 mm bore complete all as specified and as directed.
150	S & F PVC (SWR) vent cowl bore of110 mm bore, complete all as specified and as directed.
151	S & F PVC (SWR) branch piece, single (single Y) equal or unequal bore of pipe 75mm with access door, complete all as specified and as directed.
152	S & F PVC (SWR) bends any radius of bore 75 mm bore, complete all as specified and as directed.
153	S & F PVC (SWR) bends any radius of bore 110 mm bore, complete all as specified and as directed.
154	S & F in repairTowel Shelf 600mm Long, 260mm width With Lower Hanger brass chromium platedof cat part no ACN-CHR-1181S of jaquar or equivalent.
155	S &FPVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.
156	S &FPVC connections pipe for geysers 15mm size of length 600 mm, complete all as specified and as directed.
157	M & L for PVC waste pipe 32 mm dia flexible with cup to fit wash hand basin waste, coupling complete all as specified and directed.
158	S & F in repairs low density polyethylene pipe of pressure rating 6 kg/sq cmof 40 mm bore, complete all as specified and as directed.
159	Supplying & fixing for 7 feet 4 pipes pulley operatoed cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes) complete all as specified and as directed.
160	M&L for Reinforced concrete pipes, class NP3, laid and jointed complete with collars, allas specified and directed.
161	M&L for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in bed to drain pipes of bore 150 mm including packing under and haunching against the sides of pipes after they are laid and tested, allas specified and directed.
162	M&L for cutting into exisiting manholes or connecting new drains, making good topipes and rendering, cutting out existing benching and forming branch channel, half round or 3/4 section in cement concrete 1:2:4 type B smooth finished and reforming benching as required for internal dia of pipe 150mm, all as specified & directed.
163	Taking down carefully copper/aluminum pointwiring(light, fan, Power) completefittings such as switches , ceiling roses pendents , regulatorssocketslight fittingsetcremoving to store for keeping in safe custody or for taking creditand making good disturbed surface of wall, floors , roofetc all as specified & directed.
164	M & L for Point wiring with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with copper conductor drawn in and incl with multi stranded copper conductor drawn through and including suitable size Non metalic regid PVC conduit and all conduit accessories (concealed) and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor fabricated branded Modular Metal concealed in walls with suitable Modularplate with outer cover with suitable screws for housing switches socket outlets fan regulators etc. all as specified and as directed.
165	All as per item No. 164 here- in - before but for one exhaust fan point controlled by one way switch.
166	All as per item No. 164 here -in - before but for One 2/3 pin switch socket point controlled by 5 Amps switch on Independent board.
167	All as per item No 164 but forOne socket outlet 5 Amps 3 pin on same board.
168	All as per item No. 164 here -in - before but for One 3 pin switch socket outlet combination, 15 Amps, independent, with cables 4 sq mm complete all as specified and directed.
169	S&F modular switch single pole one way 6 Amps 1 module complete all as specified and directed
170	S&F modular switch single pole one way 16 Amps 1 module, complete all as specified and directed
171	Supply and fix modular socket outlet, multipurpose 2 in 1 , 3 pin 5 Amps, flush type universal, all as specified and as directed.
172	Supply and fix modular socket outlet, multipurpose 2 in 1 , 3 pin 5 Amps,/16Amps flush type universal all as specified and as directed.
173	S&F Lamp holder, PVC / Polycarborate type with back plate suitable for battan fittings, all as specified and as directed.
174	Supply and fix ceiling rose, surface bakelite type,PVC, 65 x 50 mm isolated body with three terminals, all as specified and as directed.
175	Supply and fixing in repairs 4 ft LED batten, wattage 20 W, having minimum lumen out put 1880 to 2000 with a system efficiency 100 lume/wattshort circuit and voltage cut of protection and wide operating voltage range - 140V to 270 V 6500 K colour temps, 50000 hrs life, IP 20 with all accessories internally Pre wired and including connecting up with 3 core twisted flexible copper conductor cable 0.75 sq mm from ceiling to fitting, mounted on roof/wall etc. on PVC round bush of suitable approved size at as specified and as directed.
176	S&F as in repair of LED surface type decorative ultra slim round luminaire 18 watts with classic design & glare free soft illumination. Housing with white high reflection powder coatedCRCA sheet. Glare free, Opal diffuser for symmetrical light distribution fixed in separate CRCA sheet frame held in with housing by screws for easy maintenance. High efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity. Powered by an independent Isolated, SELF Output electronic LED driver (SMPS based constant current supply) efficiency of 85%lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficientand makingconnections with twin twisted unsheathed PVC copper cable of suitable size complete all as per Model No. IDL-WHT-LARP01R018XC of make - Jaquar or equivalent in other makes.
177	Supply and fixing in repairs 2 ft LED batten, wattage <10 w, having minimum lumen out put >900lm withwith specially designed extructed thermal polycarbonate housing with high optically efficient serrated diffuse, isolated multistage CCCV driver with operating voltage range-140V to 270V temp range 0 to 50 deg C, driver efficiency >85%, power factor >0.95, THD<10% colour temp 6500 K, surge protection- 3KV in CM, safty extra low voltage safe leval<60V DC as per IEC strandard,IP 20 protection, life of 50000 hrs with luminaries efficiency > 100lm/W including connecting up with twisted flexible copper conductor cable 1.5 sq mm size from ceiling rose to connector fitting, mounted on roof/wall etc. on PVC round bush of suitable approved size all as specified and directed.
178	S&F as in repair of LED surface type decorative ultra slim round luminaire 6 watts with classic design & glare free soft illumination. Housing with white high reflection powder coatedCRCA sheet. Glare free, Opal diffuser for symmetrical light distribution fixed in separate CRCA sheet frame held in with housing by screws for easy maintenance. High efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity. Powered by an independent Isolated, SELF Output electronic LED driver (SMPS based constant current supply) efficiency of 85%lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficientand makingconnections with twin twisted unsheathed PVC copper cable of suitable size complete all as per Model No. IDL-WHT-LARP01R018XC of make - Jaquar or equivalent in other makes.
179	S&F decorative wall lightG4 bulb - 5 Nos of 5 Watt, the luminaire shall have input Supply Voltage Range:140-270 V, Frequency : 50 HZ supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting and fixing to ceiling complete, all as per Cat No : DWL-NKL-MB80985Aof make- Jaquar or equavelent inPhilips / Havells.
180	S&F decorative suspended lightas four crystals based ,with gold finish plating on brass frame ,with In - direct lighting minimum18-20 LED bulbs of capacity minimum 4 W - E14/E27 base, minimum Dia 900 MMand Minimum Height 1300 MM( Approx weight 30 KG)suspension string /chain arrangement with decorative canopy Caps/fabric for suspension , protection Class -1 .The luminaire shall have input Supply Voltage Range:140-270 V, Frequency : 50 HZ supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from fitting and fixing to ceiling including taking down safely of old one and deposit to storecomplete all as per Cat No: DTD-GLD-CUSTAS11087x2.8F of make - Jaquar or equavalent inPhilips / Havells.Note :-(i) 10 years warrenty on Gold Plating and one year on LED bulb shall be furnished by contractor.(ii) Before placeing order design shall be approved by GE.
181	S&F energy efficient wallmounted LED luminari7 watt , The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02.Life class of 50,000hrs @ L70, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting and fixing to ceiling complete all as per Cat Part No: DWL-NKL-WLRB0480SE27of make - Jaquar or equivalent in other makes.
182	S&F energy efficient wallmounted LED luminari2X5 watt , The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02.Life class of 50,000hrs @ L70, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting and fixing to ceiling complete all as per Cat Part No: DBL-CHR-MB12021262A of make - Jaquar or equivalent in other makes.
183	S&F LED building security/street light fitting 35/36 wattsmade up of pressure diecast housing with toughened glass diffuser, with high power LEDs with option of secondary optic with IP66 protection, 110 LM/ watt and wired with accessories including suitable bracket & clamps with bolts & nuts, all as specified and directed
184	Supply and fixing Surface/recessed mounted LED luminaire 600 mm x 600 mm, 36/40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable sizeand including cosidering material & labour forfixing ceiling hight upto 15 Mtr, all as specified and as directed.
185	M & L for provision of Domestic Exhaust fan 300 mm sweep metal body, 230/240 volt AC single phase 410W, 1400 RPM, including core cutting hole on stone masanery (Machine cutting) suitable for fixing exhaust fan with suitable nuts bolts and louers and make good the surface to match with existing surface completeall as specified and directed
186	S&F Exhaust Fan of continuous duty with PVC louvers,ball bearing. silent operation, PVC body and blades with fixing arrangements of size 250 mm sweep, 900 to 1200 rpm, 240V,all as specified and directed
187	Supply and fix electric water heater,storage type steel body with Galvanized enamelled coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including connecting up electrical , heat,cold water connections as per site requirement and testing complete including suitable GI pipes for hot water supply, necessary connection and chromium plated Bib tap, all as specified and directed
188	M&L for sub main wiring with two single core 4 Sqmm stranded copper conductor unsheathed PVC insulated cable 1100V grade,drawn through & including suitable size of non-metallic PVC rigid conduit with one4 Sqmm single core sqmm copper conductor cable as earth conductor and conduit accessories fixed up in surface/recessed as required, connection up and taking down old wiring complete all as specified and directed.(NOTE - Two single core 4 Sqmm andOne single core 4single cable as earth conductor including PVC rigid conduit shall be measured as one length)
189	M&L for sub main wiring with two single core 6 Sqmm stranded copper conductor unsheathed PVC insulated cable 1100V grade,drawn through & including suitable size of non-metallic PVC rigid conduit with one6 Sqmm single core sqmm copper conductor cable as earth conductor and conduit accessories fixed up in surface/recessed as required, connection up and taking down old wiring complete all as specified and directed.(NOTE - Two single core 6 Sqmm andOne single core 6 Sqmmas earth conductor including PVC rigid conduit shall be measured as one length)
190	Supply and fixsheet metal enclosure distribution board SPN, 4 way 240 volts, without bus bar, with IP 42 protection and Double Door, suitable for mounting MCBs, complete all as as specified and as directed.
191	S&F in repairs MCB DB SPN 8 WAY , horrizontal, double door, 240 V, AC,50 Hz, for MCB DP as incommer and and SP MCBs as out going.IP- 43 protection confirming to IS-13032, universal mounting with copper busbar, neutral link, earth link, earthing shuds detachable gland plates with knockouts on both sides all asspecified & directed.
192	S&F in repairs MCB single pole and neutral 240 volts 40 Amps, 10 KA rupturing capacity \"C\" series all as specified and as directed.
193	S&F in repairs MCB single pole240 volts 5 to 30 Amps, 10 KA rupturing capacity \"C\" series all as specified and as directed.
194	Supply, installation, testing and commissioning of factory made meter panel board wall mounted made out of CRCA sheet of 2mm thick indoor type totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body duly grouted in wall including provn of Acriylic sheet for meter reading, space for refixing of single phase KWH meter 5-60 Amps -10 Nos AC 230Volts incl lugs, spacer mounting chanels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc, suitable compartment of every meter and control MCB circuit and epoxy powder coated spray paint with primer, CPRI type tested complete all as directed including the following accessories:-Incoming (a) MCCB 63amps 04 pole ,415 Volts, 16 KA - 01 No(b)R-Y-B phase LED indicating lamp-03 Nos (c)Copper wiring in panel of suitable size (d) 200 Amps TPN copper busbarOut going (a)MCB 32 - 40 amps SPN, 230 Volts, 10 KA -09 Nos (b)MCB SPN 10Amps ,230Volts, 10KA-01 No (c)Re-fixing existing electric meter - 10Nos
195	Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core, all as specified and directed.
196	Supply,Laying and testing XLPE UG cable 10sqmm including of taking out of old u/s cablecross sectional area and 4 core PVC insulated armored heavy duty electric cable with aluminum conductor 1100 volts grade in trenches including taking up defective unserviceable cable, all as specified and directed.
197	M&L for well burnt as class ‘B’ bricks as cableprotection to under ground cables laying with length of the bricks equal to the width of the trench, complete all as speified and directed.
198	M& L for Spreading ribbed soil in trenches as in cable cushioning all as per IS 1255-1983and as specified & directed. Note :- (i)Excavated approved soil shall be ribbed by using sieve to separate composite particles etc as per IS and refiiling in trenches 8 CMbefore laying of cable 8 CM and 15 CM after laying of cable. This is than gently punned down to a depth of 10 cm above the top of upper most cable(ii) For the purpose of measurement only punned thickness only will be considered for paymet.
199	M & L for earthing with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of plate not less than 1.5 m below ground level connected to and including using GIstrip of size 25 X 4mm (up or 7.5 mtr length) and GI pipe 40 mm light grade for protection of GI earth wire by means of bolts, nuts, checknuts and washers made out of galvanised ironwire and connected to earth test point/Polesas shown in electrical plate No. 3 of SSR Part-1-2009 and as specified or indicated and testing on completion including excavation and earth work any in type of strata available at site, PCC (1:3:6) type C-1 for earth chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire fabric (xpm) weight not less the (4kg/sqm) funnel with GI watering pipe of 20mm bore medium grade, wire nuts and lugs complete all as speified and directed.
200	Supply & fixing IP 66thermoplastic-polycarbonate cable junction box of size 205X255X112 MMwith terminal which is totally shock proof, water proof, halogen free, silica and having internally embedded gasket technology fixing on pole / surface / framewith the helpof GI calmp of required size / self drill screw, one no of MCB SP 6 Amp and four way Connectorcomplete all as per Cat Part No -DK 2525G of make - Henselor equivalent in other makes.
201	Supply & fixing IP 66thermoplastic-polycarbonate cable junction box of size 155X210X92 MM with terminal which is totally shock proof, water proof, halogen free, silica and having internally embedded gasket technology fixing on pole / surface / framewith the helpof GI calmp of required size / self drill screw,one no of MCB SP 6 Amp and four way Connectorcomplete all as per Cat Part No - DK 1610G of make - Henselor equivalent in other makes.
202	Supply and fixwiringto suitable street light fitting connection tapping from the line / connecting up from the junction box to the fitting etc with two run of 1.5 Sqmm multistranded PVC insulated copper conductor drawn through & including non metallic PVCRigid/ flexible conduit(20mm dia) , complete all as speified and directed.(Note:-Two run of cable copper conductor and non metallic PVCRigid/ flexible conduit(20mm dia) shall be measured as one unit length)
203	Supply and fixLEDpost top lanternfitting 25 watts on existing pipe of any size and height with all accessories prewired fixed with GI clamps nuts bolts, all as per Cat Part No --RUBYPT25WLED757SSYMTOPC of Make Havells or equvalent in other makes.
204	Supply and fixingin repair IP65 Rated LED Bollard with robust design and efficient light distribution 10 watt on existing pipe of any size and height with all accessories prewired fixed with FI clamps nuts bolts etc. including taking down existing fittings all as per Cat Part No -LBLSN-10-CDL of Make - Crompton or equivalent in other makes.
205	M&L cutting the road hard standing & making good surface with PCC 1:3:6type C-2 (using 40 mm graded stone aggregate) andremoving the excavated material to distance not exceeding 50mtr,all as specified & directed.
206	Supply and fixin repair for GI pipe light grade 40 mm dia for cable protection on road crossings /plinth protection with fixed to the pole wall etc along withsuitable fittings for cable protection .
207	Supply, installation, testing and commissioning LTFeeder pillar box CPRI Testedof Size 750x550X400 mmsuitable for 3 phase 415 Volts of suitable size out door made out 3.15mm thick CRCA sheet of outdoor of panel with angle iron frame of size 50x50x6mm cubical type complete with aluminium bus bar 400Amp and including PCC foundation as per site requairment to accomodated to the following -INCOMING(a)MCCB 4 pole 63Amp 16 KA - 01 No. (b)LEDindicating lampR-Y-B - 03 Nos.OUTGOING(a)Aluminium Bus BarNote :-(i)MCCB should be ICU = 100 % ICS (ii) MCCB should be adjustable O/L0.8-1 andS/C - 5-10 ln.
208	Supply and fixing LED floodlight 150 watt made up of die cast aluminium housing with toughned glass and high power LEDs and secondary lenses with IP 66 protection and system efficiency ≥ 125 LPW with option for 3000K 10 KV SPD includesand corrosion resistant complete with driver and lamp.protection complete includinng street light fitting bracket nuts, bolts, washers complete, all as specified and directed.
209	Supply, errection, testing and commissioning raising and lowering type not less than 16Mtr height high mast system shaft in two section suitable for 44m/s wind speed aling with head frame, luminaire carriage suitable for 08 luminairies in symmetrical arrangement and other accessories manufactured in factory including raising lowering system comprising double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box.HIGH MAST SYSTEM: Height of the mast not less than 16Mtr, Design standard PLG 07 of ILP, Basic Wind speed as per IS:875 Part III Design life - 25 yrs; Material construction as per S355 grade as per BS - EN10 025; Base dia - 410mm & Top dia - 150mm; with plate thickness : Bottom - 4mm & Top - 3mm. Cross section of the mast shall be 20 side polygon with BS EN ISO 1461 standard galvanisation. With GI single spike lighting protection finial. The high mast shall have 8 nos of foundatinon bolt with a PCD of 490mm of TS600 type with 30mm dia and 850mm length. Base plate with a dia of 570mm and thickness of 25mm LUMINAIRE CARRIAGE: Luminaire carriage shall be made of 50NB ERW class B MS Pipe with diameter of carriage ring at 535mm. Construction shall be with 8 arms which are welded andin two sections capable of holding 08 luminairies. TRAILING CABLE: suitable size copper cable with EPR insulation and PCP sheathed. WINCH/POWER TOOL: Winch with double drum, SWL 750Kg integral motor with 1HP capacity with 6 pole, single speed. STAINLESS STEEL WIRE ROPE: Stainless Steel wire with AISI 304 grade and 7/19 construction with 2/3 wire rope of 6mm dia and 2350Kg as breaking load capacity. all as specified & directed.
210	Note: The rate quoted shall be inclusive of the following :-(a) Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates & templates- complete set(b) Supply of suitable copper conductor cable, glands, lugs and wiring from panel to light fittings- 01 Job(c) Construction of suitable shallow RCC foundation with M-25 grade concrete for the mast considering the safe soil bearing capacity at site as 10 t/m² at 2 metre depth with all material and labour all as per Manufacturer\"s design of foundation drawing as approved by GE.
211	(d)Erection and commissioning of the high mast with the help of suitable equipment. (e)Provision of GI pipe earthing for mast with 2.5m long 40mm dia GI Pipe including connection to mast earth terminal with 32 X 6mm GI flat with all material and labour.(f) Provision of Aviation obstruction lightLED type. (g) Provision of lightening arrestor spike.(g) The Contractor shall submit OEM technical specification of High mast for approval of GE before placing order.
212	M&L for Dismantling water tanks of capacity 500L and removing to store,all as specified & directed.
213	M&L for Dismantling water tanks of capacity 1000L and removing to store,all as specified & directed.
214	Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for,all as specified & directed.
215	Demolition of cement concrete (reinforced) of any description and in any position, all as specified & directed.
216	Demolition of Brickwork/ block/stone masonry laid in cement mortar, all as specified & directed.
217	Dismantling of MS work of any description not otherwise described, all as specified & directed.
218	Removing building materials etc to a distance of 1000 mtr or , ncluding loading, unloading and stacking at the destination, all as specified & directed.

Also Visit

Tenders

Karnataka Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Addition / Alteration To Officers Mess And Living In Accommodation At Afs Jalahalli, Jalahalli-Karnataka

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Addition / Alteration To Officers Mess And Living In Accommodation At Afs Jalahalli, Jalahalli-Karnataka

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us