|
| 1 | A - Civil & Interior Works |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 M lead as per direction of the EIC. |
| 3 | In cement mortar |
| 4 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 M lead: |
| 5 | Of area 3 sq.m. amd below |
| 6 | Of area beyond 3 sq. metres |
| 7 | Dismantling tile work in floors and roos laid in cement mortar including stacking material within 50 M lead. |
| 8 | For thickness of tiles above 25mm and upto 40mm |
| 9 | Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : Thickness up to 40 mm |
| 10 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or asas directed by EIC, beyond 50m initial lead, for all leads including all lifts involved. |
| 11 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres leadas directed by EIC : In cement mortar |
| 12 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres leadas directed by EIC. |
| 13 | Dismantling wooden cupboards / partitions, aluminium/ Gypsum partitions or False ceiling / Allunimium doors, windows/ fixed or openable glazing or any other interior structures including disposal of unserviceable material and stacking of serviceable material with in 50 M leadas directed by EIC. |
| 14 | Providing and installing 5-6MM THK SPC(STONE POLYMER COMPOSITE) flooring with 1.5mm thick styrofoam and 25mm thick 75mm high composite wooden skirting complete as per the selection & drawing provided by the architect and as directed by EIC. (Base Rate: Rs. 120/sq.ft.) |
| 15 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily: GALZED VITRIFIED TILES 600 X 600 |
| 16 | Providing and fixing 150MM thick Partition with Panelling(CGM CABIN) with framework of 50mm x 50mm hollow square aluminium sections of 1.6mm gauge placed at 600mm c/c. The framework shall be covered on one side with 12 mm thick midium density fibre board finished with 4mm wood veneer(base rate:₹100/sqft), as per the design of the architect inclusive of all hardware fittings etc. complete as per direction of EIC. |
| 17 | Providing and fixing 75MM thick Partition with Panelling (TV PANEL LIBRARY , TOILET WALL PANEL ZONAL CGM)with one side cement board finished with COLOR PU as per the design of the architect inclusive of all hardware fittings etc. complete as per direction of EIC. |
| 18 | Providing and fixing partition (existing cabin in open office glass partitions)of sizes as provided in architect\"s drawing, with 75mm x 75mm square wooden section frame fixed with 10mm thick fluted glass and 12.5mm x 25mm thick wooden beading inclusive of hardware all complete as directed by EIC. |
| 19 | Providing and fixing 75mm thick partitions 1.2m high made in framework of 50mm x 50mm square hollow aluminum section of 1.6mm gauge placed at 600mm c/c. The framework shall be covered with 12mm thick plywood of specified make pasted with 1mm thick laminate as selected by the architect, inclusive of hardware all complete as directed by EIC. |
| 20 | Providing and fixing 75mm thick full height partitions(Conference room/ LIBRARY opposite tv) made in framework of 50mm x 50mm square hollow aluminium section of 1.6mm gauge placed at 600mm c/c. The framework shall be covered with 12mm thick plywood of specified make pasted with 1mm thick laminate as selected by the architect, inclusive of hardware complete and as directed by EIC. |
| 21 | Providing and fixing panelling or Panelling and Glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Ply wood 5 ply, 9 mm thick all complete and as directed by EIC. |
| 22 | Decorative plywood both side decorative veneer (Type - I) conforming type |
| 23 | Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming type |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length all complete and as directed by EIC (hold fast lugs or dash fastener shall be paid for separately). |
| 25 | Providing an fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass, including ISI MARKED M.S. pressed butt hinges, bright finished of required size with necessary screws all complete and as directed by EIC. (Second class Teak wood 35mm thick) |
| 26 | Extra over and above the previous item for providing FLUTED glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters including hardware fittings etc. complete as directed by EIC. (Area of opening for glass panes excluding portion inside rebate shall be measured). |
| 27 | Providing and fixing ZONAL CGM TABLE of length 2.4m x bredth 1.0m x height 0.75m using formwork of BWR plywood grade of specified make, on the top and MDF fluted panel finished with colour PU matte finish at the bottom. The frame to be finished at the top with 4mm thick veneer (base price Rs. 120/sq.ft.) and leatherite as per the design and selection of the architect inclusive of hardware and necessary screws and nails required all complete as directed by EIC. |
| 28 | Providing and fixing SIDE CREDENZA for Zonal CGM cabin of dimensions - length (1.5) m x breadth 0.45 m x height 0.8m. The side credenza to be made in plywood of specified make with liner laminate of thickness 1mm as per the selection of the architect. The outer side to be made in 4mm thick teakwood veneer (Base price: Rs. 120/sq.ft.) finished in clear PU as selected by the architect inclusive of necessary hardware (screws, nails) and soft close channels for drawers all complete as per direction of EIC. |
| 29 | Providing and fixing open shelf (LIBRARY), floor to ceiling height of dimensions - length 3.1m x bredth 0.6m as per the design provided by the architect. The shelf to be made in 19mm thick Medium Density Fibre board of specified grade and make finished in acrylic royale paint on the outside and laminate 1mm thick on the inside; with wooden skirting 75mm in height finished in polish (matte finish) as selected by the architect inclusive of necessary hardware (screws, nails) and soft close channels for drawers etc. complete as directed by EIC. |
| 30 | Providing and fixing staff workstations OPEN OFFICE TABLE @1500LX600DX750HT WITH PEDESTAL MAKE : FEATHERLITE/ HNITABLE TOP : 25 MM thk. Prelaminated Particle Board with 2MM PVC Edge band on all side. Table top at 750 MM height from floor level. Cut-out provision for wire manger or Access flap as required.UNDERSTRUCTURE : Splayed ( Slant ) Legs made up of 40x40MM MS pipe finished in Powder coating. Cross members made up of 40x40MM Lip section finished in Powder coating are connected to Legs with Brackets for table supportWIRE MANAGMENT : PVC GROMMETMODESTY 450 MM HT.: 18 MM thk. Prelaminated Particle Board Board with 2MM PVC Edge band to all Exposed ArEABRACKET : MS powder coating finish corner & cantilever bracket for worktable support |
| 31 | PROVIDING & FIXING EXECUTIVE OFFICE TABLE @1500LX750DX750HT WITH SIDE COMBO STORAGE @ 900LX460DX750HTMAKE : FEATHERLITE COLLABORATE EXECUTIVE TABLE SERIES / HNITABLE TOP : 25 MM thk. Prelaminated Particle Board with 2MM PVC Edge band on all side. Table top at 750 MM height from floor level. Cut-out provision for wire manger or Access flap as required.UNDERSTRUCTURE : Splayed ( Slant ) Legs made up of 40x40MM MS pipe finished in Powder coating. Cross members made up of 40x40MM Lip section finished in Powder coating are connected to Legs with Brackets for table supportWIRE MANAGMENT : PVC GROMMETMODESTY 450 MM HT.: 18 MM thk. Prelaminated Particle Board Board with 2MM PVC Edge band to all Exposed ArEABRACKET : MS powder coating finish corner & cantilever bracket for worktable supportSIDE CREDENZA : 2 Drawers & 1 Filling Drawer With 1/ 2 Openable Shutter finish in 25 / 18 MM thk. Prelaminated PB Board 2MM PVC Edge band to all Exposed Area & Metal Drawer with Centralized Lock. ( SIZE : 1200 X 460 X 750 MM HT.) |
| 32 | Providing and fixing ISI marked flush door shutters decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws etc. all complete as directed by EIC. |
| 33 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. all complete as directed by EIC. (Frames, backing or studding to be paid separately): 18 mm thick for file STORAGE |
| 34 | PRINTING STATION WORKSTATION : Providing and fixing workstation, made from following configuration. Top (1350x600): 25mm thk plywood table top with 1mm laminate on top side and 0.8mm liner laminate on underside. Undercarriage(750mm ht) : 25mm thk plywood table top with 1mm laminate on both side. The plywood shall be made from is 710:1976. Laminate shall be either Merino/ DAMAS as directed by EIC.. |
| 35 | ZONAL CGM Cabin TV Console unit: P & F Console unit (size: 1350X400X275), with 25MM thick plywood frame with wood veneer on outside with clear PU polish on each surface. The frame has to be screwed on the existing wall all complete as directed by EIC. |
| 36 | Providing and fixing 75MM THK PARTITION WITH PANELLING (between reception and open office) with framework of 50mm x 50mm hollow square aluminium sections of 1.6mm gauge placed at 600mm c/c. The framework shall be covered on one side with 19MM PLYWOOD + 4MM VENEER on both sides finished with clear PU polish as per the design of the architect all complete as directed by EIC.. |
| 37 | Providing and fixing 75MM THK PARTITION WITH PANELLING (on wall between open office and OTS) with framework of 50mm x 50mm hollow square aluminium sections of 1.6mm gauge placed at 600mm c/c. The framework shall be covered on one side with 19MM PLYWOOD + 4MM VENEER on one sides finished with clear PU polish as per the design of the architect all complete as directed by EIC.. |
| 38 | PROVIDING & FIXING Meeting TABLE : Providing and fixing Meeting table top, made from following configuration. Top (4400x1650): 25mm thk plywood table top with 4mm veneer on top with CLEAR PU POLISH AND 0.8mm liner laminate on underside as per drawing Laminate shall be either Merino/ DAMAS all complete as directed by EIC. |
| 39 | TV CONSOLE UNIT CONFERENCE ROOM: P&F Console unit (size: 4200X400X275), with 25MM thick plywood frame with wood veneer on outside with clear PU polish on each surface. The frame has to be screwed on the existing wall 0.8mm liner laminate on underside. as per the drawing.. Laminate shall be either Merino/ DAMAS all complete as directed by EIC. |
| 40 | Providing and fixing Under counterwash wash basin MAKE : JAQUAR (CNS-WHT-701) with C.I. brackets, WITH BLACK GRANITE STONE PLATFORM SANDWICH TYPE WITH cutting and with proper finish with the walls wherever required : White Vitreous China Wash basin size 485*370*205 mm |
| 41 | Providing and fixing white vitreous china pedestal type water closet MAKE : JAQUAR model : CNS-WHT-963UFSM(Series : Continental) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 42 | Providing and fixing Metropole Flush valve, Metropole Flush Valve Regular 40mm Size (Concealed Body) with Exposed, Shut Off Provision & 100mm Square Plate.Make : Jaquar ( FLV-CHR-1093SQ) |
| 43 | Providing and fixing C.P. brass long EAe Two way bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. Make : Jaquar (OPP-CHR-15041PM) |
| 44 | Providing & fixing chrome plated brass battery based infrared sensor operated having foam flow technology Single Lever Basin Mixer without Popup Waste, with 450mm Long Braided Hoses . Make : Jaquar (OPP-CHR-15011BPM) |
| 45 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 . Make : Jaquar (OPP-CHR-15053PM ) |
| 46 | Providing and fixing C.P. brass health faucet of approved quality conforming to IS:8931 . Make : Jaquar ( ALD-CHR-573 ) Hand Shower (Health Faucet) with 8mm Dia 1.2 Meter Long Flexible Tube and Wall Hook |
| 47 | Providing and fixing C.P. brass Liquid Soap Dispenser of approved quality conforming to IS:8931 . Make : Jaquar ( AKP-CHR-35735P ) Soap Dispenser with Glass bottle |
| 48 | Providing and fixing C.P. brass Toilet paper holder of approved quality conforming to IS:8931 . Make : Jaquar ( AHS-CHR-1553 ) Paper Holder with Flap Recessed Type (Stainless Steel) |
| 49 | Providing and fixing C.P. brass Napkin ring of approved quality conforming to IS:8931 . Make : Jaquar ( AQN-CHR-7721 ) Towel Ring Round (Chrome) |
| 50 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 51 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 52 | 15 mm nominal dia Pipes |
| 53 | 20 mm nominal dia Pipes |
| 54 | 25 mm nominal dia Pipes |
| 55 | 32 mm nominal dia Pipes |
| 56 | PROVIDING AND FIXING SWR UPVC Pipe (Drainage) MAKE: ASHIRVAD/ PRINCE/ JAIN, WITH ADHESIVE SOLVENT FOR CONNECTION / JOINTS. |
| 57 | 110mm dia. - SOLVENT WELD ( 3 M LONG) |
| 58 | 87.5 DEG BEND |
| 59 | SINGLE TEE |
| 60 | 75mm dia. - SOLVENT WELD ( 3 M LONG) |
| 61 | 87.5 DEG BEND |
| 62 | SINGLE TEE |
| 63 | PROVIDING AND FIXING GRAPHICS FOR BRANDING ON WALL WITH 6MM BWR plywood grade (IS 710: 1976) of specified make, WITH 4MM SUNBOARD/ FOAM-SHEET WITH 2MM PRINTED VINYL ON TOP AS PER CLIENT/ ARCHITECTS DESIGN AND INSTRUCTION. THE ITEM TO INCLUDE CLEANING AND FINISHING OF SURFACE BEFORE APPLICATION |
| 64 | False Ceiling |
| 65 | Providing & fixing Gypsum board false ceiling as per the RCP drawings, inclusive of fixing approved 12mm thick Gypsum board - GYPROC make, using medium duty GI framework; screwing with approved nettle fold GI screws, sealing the joints with masking tape & sealing compound; finishing; cleaning, inclusive of scafolding etc. complete at all heights & levels & in any shape. The rate to include for rubbing, cleaning, surface preparation, cutting for light etc. complete. |
| 66 | Providing and fixing VENEER FALSE CEILING LEVEL; made out of 25mm x 25mm aluminium box section Support framework as required c/c distance, 12mm thk MDF board with WOOD VENEER(Base rate : ₹90/sqft) ON ONE SIDE with melamine polish; with grooves and design as per the architect’s drawings. The CEILING shall be fixed to the top and base using necessary fasteners to hold them in position, also inclusive of providing & fixing necessary SS pins all to the approval of the architect etc. complete.The rate to include for rubbing, cleaning, surface preparation, cutting for light etc. complete. |
| 67 | Providing & fixing 600mm x 600mm Armstrong - METAL WORKS LAY IN as per RCP drawings with TEGULAR 8 GRID STRUCTURE WITH GI HANGING WIRE FROM FROM TRUE CEILING.The rate to include for rubbing, cleaning, surface preparation, cutting for light etc. complete. |
| 68 | Removing existing false ceiling along with all concealed supports from true ceiling. |
| 69 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (ASIAN PAINTS ROYALE) with silicon additives: Two or more coats applied @ 1.43 litre/10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 70 | TILE DADO : Providing and fixing 10 mm thick acid and/or alkali resistant tiles OR 1200 X 600 VITRIFIED TILES(MAKE : KAJARIA, SIMPOLO)of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. |
| 71 | Providing services of local Architect / Consultant for Preparation of detailed drawing for Interior, Finishing work, Facade etc. as per SOR items and as per site requirement (whatsoever is required to complete the job in all respect), approval of Vendors, selection / approval of materials as per SOR and site requirement, Execution Philosophy, Quality Assurance Plan for Supply & Erection etc. as required and as directed by GAIL. The local Architect / Consultant shall be approved by EIC of GAIL. |
| 72 | Stage-wise Inspection Charges by qualified, experienced & competent local Architect / Consultant / Engineer at site as per GAIL\"s requirement all complete as directed by EIC. (Including travelling, fooding & all other expenses). The local Architect / Consultant shall be approved by EIC of GAIL. |
| 73 | Dismataling/Shifting and Installation of Godrej make optimizer FROM Gail (India) Limited, Ajit nagar GF TO same floor as per GAIL requirement - NOTES : Rates are including Dismantaling, shifting and re-installation, lobours etc. |
| 74 | SS1 Single static 1 Bay Push Pull Type |
| 75 | SL1 Single Last 1 Bay Push Pull Type |
| 76 | TM1 Twin mobile 1 Bay Push Pull Type Hinge door [ 381D] with channels |
| 77 | SS2 Single static 2 Bay Push Pull Type |
| 78 | SL2 Single Last 2 Bay Push Pull Type |
| 79 | TM2 Twin mobile 2 Bay Push Pull Type with channels |
| 80 | Providing and fixing ROLLER BLINDS with loop hooks to be installed and stick and color and shade of curtain as approved by the architect. |
| 81 | B - Septic Tank |
| 82 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge: All kinds of Soil |
| 83 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials: All kinds of soil |
| 84 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 85 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 86 | Carriage of Good earth and its disposal |
| 87 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete: All works upto plinth level: Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 88 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 89 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 90 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. |
| 91 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality : L D- 2.5 - Rectangular shape 600x450 mm internal dimensions |
| 92 | C - Soak Pit |
| 93 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge: All kinds of Soil |
| 94 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials: All kinds of soil |
| 95 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 96 | Carriage of Good earth and its disposal |
| 97 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 98 | Supplying Brick Bats including carriage and transportation cost all complete |
| 99 | Supplying Fine sand (zone IV) including carriage and transportation cost all complete |
| 100 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete: All works upto plinth level: Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 101 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 102 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 103 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 104 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 105 | D - LIGHTING, POWER & COMPUTER POWER SUPPLY DISTRIBUTION BOARDS |
| 106 | Supply, installing, testing and commissioning of metallic double door type distribution board with following MCBs / ELMCBs / RCCBs / etc. with all necessary connections, remaining blank area shall be covered with blanking (dummy) plates etc.complete. (All DBs shall be installed concealed in Non-Plant Bldg. and Surface mounted in Plant Bldgs.) w.r.t Technical specification: |
| 107 | 6-WAY TPN PPI DB : (LDB-1 ; RPDB-1), Incoming : 40A FP MCB , Sub Incoming : 40A DP RCCB - 30 mA (3 EA), Outgoing: 6 to 32 A SP MCB(12 EA) |
| 108 | Supplying |
| 109 | Installation |
| 110 | 8-WAY TPN PPI DB : (LCDB-1 ; CPDB-1), Incoming : 40A FP RCB, Sub Incoming : 40A DP RCCB - 30 mA (3 EA), Outgoing: 6 to 32 A SP MCB(18 EA) |
| 111 | Supplying |
| 112 | Installation |
| 113 | 4-WAY VTPN DB : Suitable for Incommer FP MCCB and SP/TP MCBs as outgoings (UPS DB), Incoming : 100A FP MCCB, 25KA, TMD, Outgoing: 63 A TP MCBs(2 EA), Outgoing :6 to 32 A SP MCB(6 EA) |
| 114 | Supplying |
| 115 | Installation |
| 116 | E - INTERNAL WIRING |
| 117 | NOTE : ALL JARIESORCHASES IN WALLS / COLUMNS / SLABSSHALL BE MADEBY MACHINE AND FOR INSTALLATION OF CONDUITS/ S.B. /BOXESETC ARE IN THE SCOPE OF CONTRACTOR.THEFILLING OF THE SAME ISIN THESCOPE OF THE CONTRACTOR INCLUDINGALLNECCESSARY MATERIAL AND LABOUR COMPLETE.THERATE SHOULD BE QUOTED ACCORDINGLY. THE SCOPE OF CONTRACTOR ALSOINCLUDES PACKING / UNPACKING / SHIFTING / LOADING / UN-LOADING OF ALL CLIENT SUPPLLIED MATERIALS. |
| 118 | Providing and making point wiring in surface / concealed in slab, walls, furnitures and for above false ceiling, or on ceiling, on beams shall be fixed with saddles and spacers etc., with conduits taken in/on slab with 20 mm dia., 2mm thcik PVC rigid FIA approved ISI marked conduits with bends, tees, elbows, junction boxes etc., with 650 / 1100 V grade ISI marked PVC insulated copper conductor wires i.e. 2 EA of 1.0 sq.mm and 1 no of 1.0 sq.mm multi-stranded flexible type single PVC insulated copper conductor wires all accessories screws and washers, modular series switches with all accessories of ANCHOR PENTA make/ MDS Legrand / EQUIVALENT such as 5 amp, 5 pin, socket, one or two way switch all mounted on modular cover plate with flush company made metal box and outlet box of 18 SWG GI with its accessories, angle holder / batten holder / ceiling rose, 3 mm thick hylam cover plates for outlet box etc., electrical point to be complete in all respect to the satisfaction of E.I.C. |
| 119 | One 5A switch controlling primary light point |
| 120 | Supplying |
| 121 | Installation |
| 122 | Secondary light point looped from nearest primary light point |
| 123 | Supplying |
| 124 | Installation |
| 125 | Two way controlling light point |
| 126 | Supplying |
| 127 | Installation |
| 128 | One 5A switch controlling one fan point with fan hook using double fastner fan hook and step control humfree Fan Regulator complete |
| 129 | Supplying |
| 130 | Installation |
| 131 | 5A socket outlet (5 pin) with 5A SP switch (on common board). |
| 132 | Supplying |
| 133 | Installation |
| 134 | 5A socket outlet (5 pin) with 5A SP switch (as an independent point) . |
| 135 | Supplying |
| 136 | Installation |
| 137 | Providing and making point wiringin concealed in slab, walls, furnitures and for above false ceiling, or on ceiling, on beams shall be fixed with saddles and spacers etc., with conduits taken in/on slab with 25 mm dia., PVC Rigid Conduit Heavy dutywith bends, tees, elbows, junction boxes etc., with 650 / 1100 V grade ISI marked PVC insulated copper conductor wires i.e. 2 EA of 1.5 sq.mm & 1.0 sq.mm earthing multi-stranded flexible type single PVC insulated copper conductor wires electrical point duly control by MCB in LCDB to be complete in all respect to the satisfaction of E.I.C. (MCBs and LCDB TAKEN IN SEPERATE ITEM) : 10 A MCB controlling primary light point |
| 138 | Short Point (Upto 9 M) |
| 139 | Supplying |
| 140 | Installation |
| 141 | Medium Point (9.1 M to 12 M) |
| 142 | Supplying |
| 143 | Installation |
| 144 | Long Point (12.1 M to 15 M) |
| 145 | Supplying |
| 146 | Installation |
| 147 | Extra Long Point (15.1 M to 18 M) |
| 148 | Supplying |
| 149 | Installation |
| 150 | Extra Long Point (18.1 M to 21 M) |
| 151 | Supplying |
| 152 | Installation |
| 153 | Extra Long Point (21.1 M to 24 M) |
| 154 | Supplying |
| 155 | Installation |
| 156 | Extra Long Point (24.1 M to 27 M) |
| 157 | Supplying |
| 158 | Installation |
| 159 | Supply and installation of 5/15A ( 6 pin) switch socket of ANCHOR PENTA make/ MDS Legrand / EQUIVALENT make with flush metal box of company made with modular cover plate complete duly concealed with all necessary terminations complete to the satisfaction ofE.I.C. (Without wiring) |
| 160 | Supplying |
| 161 | Installation |
| 162 | Supply and installation of1 no. of 5 A, 5 pin socket with 1 no. of 5 A switch of M. K. India make Wraparound series / MDS Legrand / ABBmake to be on one board with flush metal box of company made with modular cover plate complete duly concealed with all necessary terminations complete to the satisfaction of E.I.C. (Raw Power supply point) (Without wiring) |
| 163 | Supplying |
| 164 | Installation |
| 165 | Supply and installation of2 EA of 5A, 6 pin sockets all of ANCHOR PENTA make/ MDS Legrand / EQUIVALENT make to be on one board with flush metal box of company made with modular cover plate complete duly concealed with all necessary terminations complete to the satisfaction of E.I.C. (Computer Power supply points - RAW POWER) (Without wiring) |
| 166 | Supplying |
| 167 | Installation |
| 168 | Supply and installation of2 EA of 5A, 6 pin sockets all of ANCHOR PENTA make/ MDS Legrand / EQUIVALENT make to be on one board with flush metal box of company made with modular cover plate complete duly concealed with all necessary terminations complete to the satisfaction of E.I.C. (Computer Power supply points - UPS) (Without wiring) |
| 169 | Supplying |
| 170 | Installation |
| 171 | Supply and installing 32 A, 230V, Industrial poycarbonate socket outlet with top all enclosed in pre-fabricated powder coated box company made complete duly concealed with all necessary terminations completetothe satisfaction ofEIC (For AC). (Without wiring) |
| 172 | Supplying |
| 173 | Installation |
| 174 | Supply and installation of 32A DP switch of M.K. India make Wraparound series / MDS Legrand / LK pace English model make with flush metal box of company made with modular cover plate complete duly concealed with all necessary terminations complete to the satisfaction ofE.I.C. (for AC On/Off)(Without wiring) |
| 175 | Supplying |
| 176 | Installation |
| 177 | Providng, installing, testing, commissioning of mains / sub-mains of following sizes PVC insulated copper conductor multi-stranded flexible type wires with 20 / 25mm dia., 1.5 mm thick FIA approved ISI marked PVC conduits with all accessoreis complete with following wires. |
| 178 | 2 EA of 2.5 sq mm wires and 1 no. of 1.0 sq mm PVC Insulated copper conductor wires (DB TO SB & SB TO SB & Computer Power Supply). |
| 179 | Supplying |
| 180 | Installation |
| 181 | 4 EA of 4.0 sq mm wires and 1 no. of 2.5 sq mm PVC Insulated copper conductor wires |
| 182 | Supplying |
| 183 | Installation |
| 184 | 4 EA of 16.0 sq mm wires and 2 EA of 2.5 sq mm PVC Insulated copper conductor wires |
| 185 | Supplying |
| 186 | Installation |
| 187 | Supply, laying, installation, testing and commissioning of 2 EA of 2.5 sq mm wires and 1 no. of 1.0 sq mm PVC Insulated copper conductor wires to be laid in existing floor raceway / conduits / PVC trunking complete with all required terminations etc complete to the satisfaction of EIC (For Computer Power Supply, Access Controls) |
| 188 | Supplying |
| 189 | Installation |
| 190 | F - LIGHTING FIXTURES |
| 191 | Supply, installation, testing and commissioning of following Light fixtures etc. Including supply and installation of flexible cords, ball sockets, down rods, hardwares etc. Excluding supply and fabrication of major structural steel supports for fixtures. but inclusive of erection of fixtures with all necessary structural steel supports and to be welded or nut-bolting with all necessary fabrication and drilling etc.complete. |
| 192 | 15W, COB LED - 6500K light fixture surface RECESSED with in-built driver etc complete (HAVELLS MAKE CAT. NO. LHEBKHPGIE1W015) |
| 193 | Supplying |
| 194 | Installation |
| 195 | 6W, COB LED - 6500K light fixture surface RECESSED with in-built driver etc complete (HAVELLS MAKE CAT. NO. LHEEHEPGIEW006) |
| 196 | Supplying |
| 197 | Installation |
| 198 | Recessed false ceiling mounted LED FullGlow PANEL LIGHT SIZE : 1200 x 600 mm panel fixture with necessary assembly lamp, drivers, diffusers etc complete (PHILIPS MAKE) |
| 199 | Supplying |
| 200 | Installation |
| 201 | Surface mounted 15w LED downlight fixture with necessary assembly lamp, drivers, diffuser etc complete (TISV MAKE IVEX PRIME SERIES CAT NO. DL1561211A) |
| 202 | Supplying |
| 203 | Installation |
| 204 | 17MM WIDE ALUMINIUM RECESSED PROFILE, 240 LED PROGLOW ROPE LIGHT (PHILLIPS MAKE : P45LEDStrip ) - 45W, 5M LONG MODULE |
| 205 | Supplying |
| 206 | Installation |
| 207 | 240 LED PROGLOW ROPE LIGHT (PHILLIPS MAKE: P45LEDStrip ) - 45W, 5M LONG MODULE |
| 208 | Supplying |
| 209 | Installation |
| 210 | Suspended pendant light(PHILLIPS MAKE) SP791P I LED33S 865 PSU W6L120 OC WH |
| 211 | Supplying |
| 212 | Installation |
| 213 | Wireless 4 Channels ON/Off 220V Remote Control Switch Digital Remote Control Switch for Lamp & Light |
| 214 | Supplying |
| 215 | Installation |
| 216 | G - IT WORKS |
| 217 | Supply and laying of 25 mm dia. 1.5 mm thick, PVC rigid conduit, ISI mark with all accessories complete to be concealed in wall, flooring etc. complete |
| 218 | Supplying |
| 219 | Installation |
| 220 | Supply and installation of following size PVC trunking with cover and all accessories such as internal, external joints, coupler, angles, cable retainers, etc. complete of M. K. India make / MDS / Precision Plastic co. make complete to the satisfaction of EIC. |
| 221 | 100 x 50 mm |
| 222 | Supplying |
| 223 | Installation |
| 224 | 50 x 50 mm |
| 225 | Supplying |
| 226 | Installation |
| 227 | Supply and installation of 100 mm x 50 mm PVC trunking (cable management system) with cover and all accessories such as internal, external joints, coupler, angles, cable retainers, cable deviders, etc. complete with all required PVC boxes for installation of switches and accessories complete of M. K. India make / MDS make complete to the satisfaction of EIC. |
| 228 | Supplying |
| 229 | Installation |
| 230 | Supply and installation of following size, 16 SWG G.I. box with top cover of 16 SWG G.I. covers, hardwares, necessary knock-out all sides suitable for conduit complete :150 mm x 150 mm x 40 mm |
| 231 | Supplying |
| 232 | Installation |
| 233 | Supply, installation, testing and commissioning of following size mm Ega Underfloor Traks and Accessories of M. K. India make Cable Management System with all accessories such as internal, external joints, coupler, angles, etc. complete with all required hardwares and accessories complete to the satisfaction of EIC: 150 x 38 x 1.6 mm - 3 Compartments |
| 234 | Supplying |
| 235 | Installation |
| 236 | Supply and installation of following size mm under floor junction (1 trap with 1 compartments) box of M.K. India make Ega series Cat. JB 250 with all required hardwares, suitable for Ega underfloor race ways etc complete : 250 mm x 250 mm x 60 mm |
| 237 | Supplying |
| 238 | Installation |
| 239 | Supply, erection, fabrication and jointing of following size GI hot deep cable tray, clamps with all accessories, GI hardwares etc. as per drawing and specification complete in line and level etc. complete to the satisfaction of EIC |
| 240 | 600 x 75 x 2.0 mm Ladder type cable tray |
| 241 | Supplying |
| 242 | Installation |
| 243 | 300 x 50 x 2.0 mm Ladder type cable tray |
| 244 | Supplying |
| 245 | Installation |
| 246 | 150 x 50 x 2.0 mm Ladder type cable tray |
| 247 | Supplying |
| 248 | Installation |
| 249 | Supply, erection, fabrication, cutting, welding and installation of structural steel using m.s. angles, flats, channels etc. as per drawing and specification with one coat of red-oxide paints and two coats of approved enamel paints with all hardwares such as anchor fastners, GI nutbolts and washers etc. complete to the satisfaction of EIC. (Cable Tray Supports) |
| 250 | Supplying |
| 251 | Installation |
| 252 | Supply, laying, testing and commissionig of DATA & Access Control Point cables of Systimax Compscope make CAT 6 UTP cables to be laid in existing conduiits / trunking with ferule numbering at both ends of each cable complete as per the requirement and the satisfaction of EIC (Cable should support a transmission speed of ~10 Gbps) |
| 253 | Supplying |
| 254 | Installation |
| 255 | Supply, laying, testing and commissionig of Single Information Outlets (I/O) RJ 45, CAT 6 (Data or Voice) of Tyco / AMP make with Single I/O faceplate complete duly mounted on suitable PVC surface box or to be mounted in concealed metallic box or to be mounted on modular furniture etc. complete.Including necessary terminations, LAN meter testing, ferruling, labelling etc complete to the satisfaction of EIC. |
| 256 | Supplying |
| 257 | Installation |
| 258 | Supply, laying, testing and commissionig of Dual Information Outlets (I/O) RJ 45, CAT 6 (2 EA of I/O i.e. Data & Voice) of Tyco / AMP make with Dual I/O faceplate complete duly mounted on suitable PVC surface box or to be mounted in concealed metallic box or to be mounted on modular furniture etc. complete. Including necessary terminations, LAN meter testing, ferruling, labelling etc complete to the satisfaction of EIC. |
| 259 | Supplying |
| 260 | Installation |
| 261 | Supply, laying, testing and commissionig of 24 Port Patch Panel of Tyco / AMP make. Including supply and fixing of single I/O RJ 45 of Tyco / AMP make in complete Patch Panel (24 EA in each Patch Panel) complete to be install in IT Rack (Rack is in seperate Item) complete with all required terminations, labelling, ferruling etc complete to the satisfaction of EIC. |
| 262 | Supplying |
| 263 | Installation |
| 264 | Supply, installation, assembling, testing and commissionin of 15-Uwall mounted Network Rack. Model : Flexibox(600 MM -W x 500MM -D) of APW make with following accessories complete job including proper dressing of all the cables with cable ties with all required hardwares and accessories complete to the satisfaction of EIC |
| 265 | Supplying |
| 266 | Installation |
| 267 | Supply, laying, testing and commissionig of 3 feet long Patch cord of Tyco / AMP make complete to the satisfaction of EIC. |
| 268 | Supplying |
| 269 | Installation |
| 270 | Supply, laying, testing and commissionig of 7 feet long Patch cord of Tyco / AMP make complete to the satisfaction of EIC. |
| 271 | Supplying |
| 272 | Installation |
| 273 | Supply, laying, testing and commissionig OF Telephone MAIN DISTRIBUTION FRAME 50 P |
| 274 | Supply, laying, testing and commissionig OF 20P x 0.5 mm, PVC cable |
