|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and softmurum,includingremovingtheexcavatedmaterialuptoa distanceof 50 m. beyond thebuildingarea and stackingand spreading as directed, dewatering, preparing the bed for the foundationandnecessary backfilling,ramming,wateringincluding shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 2 | Excavation for foundation in hard murum including removing the excavated materials upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m)By Manual Means |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 oftrap/granite/quartzite/gneissmetalforfoundationandbedding including bailing out water, Steel centering, formwork, laying/pumping, compacting,roughening them if special finish is to beprovided,finishingifrequiredandcuringcomplete,withfully automatic micro processor based PLC with SCADA enabled reversibleDrumTypemixer/concreteBatchmixplant(Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) |
| 4 | Providing and laying in situ /Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C.columns and steel stanchionsetc. including bailing out water,Steel centering formwork,laying/pumping coverblocks,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic microprocessorbasedPLCwithSCADAenabledreversibleDrum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap/granite/quartzite/gneissmetalforR.C.C.columnsasper detailed designs and drawing or as directed including steel centering, formwork,coverblocks,laying/pumping,compactionfinishingthe formedsurfaceswithcementmortar1:3ofsufficientminimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processorbasedPLCwithSCADAenabledreversibleDrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels asperdetaileddesignsanddrawingsorasdirectedincludingsteel centering,formwork,coverblocks,laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc.complete.(Excludingreinforcementandstructuralsteel).with fullyautomaticmicroprocessorbasedPLCwithSCADAenabled reversibleDrumTypemixer/concreteBatchmixplant(Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 7 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed designanddrawingsincludingsteelcentering,formwork,cover blocks,laying/pumping,compactingandrougheningthesurfaceif specialfinishistobeprovidedandcuringcomplete.(Excluding reinforcement and structural steel). with fully automatic micro processorbasedPLCwithSCADA enabledreversibleDrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/quartzite/gneiss metal for R.C.C.pardiofrequired thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem ifspecialfinishistobeprovidedandcuringcomplete.(Excluding reinforcement and structural steel).with fully automatic micro processorbasedPLCwithSCADAenabledreversibleDrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings asperdetaileddesignsanddrawings includingsteelcentering, formwork,coverblocks,laying/pumping,compactionfinishingthe formedsurfaceswithcementmortar1:3ofsufficientminimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processorbasedPLCwithSCADAenabledreversibleDrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 10 | Providing and laying Cast in situ /Ready Mix cement concrete in M-20 of trap/ quartzite/ granite/ gneiss metal for R.C.C. Waist slab,and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork ,steel props ,laying/ pumping, compaction, finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give as mooth and even surface or roughening the surface if special finish is to be provided and curing etc.complete. (Excludinge inforcement ,including cover block).(Newly laid concrete shall be covered by gunny bag,plastic ,tar paulinetc.) withfully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mixplant( Panmixer)etc.complete. With fine aggregate (Crushed sand VSI Grade) |
| 11 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. |
| 12 | Providing and fixing in position TMT - FE - 500 bar reinforcement of variousdiametersforR.C.C.pile caps,footings,foundations,slabs, beamscolumns,canopies,staircase,newels,chajjas,lintelspardis, copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 13 | Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete. |
| 14 | Fillinginplinthandfloorswithcontractors material/broughtfrom outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc. complete. |
| 15 | Providing secondclass BurntBrick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 16 | Providing internal cement plaster 12mm thick in single coat in cement mortar1:4withoutneerufinishtoconcreteorbricksurfaces,inall positions including scaffolding and curing etc. complete. |
| 17 | Providingroughcastcementplasterexternallyintwocoatsto concrete,brickorstonemasonry surfacesinallpositions withbase coatof12to15mmthickinC.M.1:4androughcasttreatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. |
| 18 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. |
| 19 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coatsincluding scaffolding, preparing the surface. (excluding the primer coat)etc. complete. |
| 20 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding ifecessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary |
| 21 | Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to10 mm thickness and confirming IS.15622-2006 (GroupBla) of approved make,shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints,curing and cleaning etc. complete. |
| 22 | Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to10 mm thickness and confirming IS.15622-2006 (GroupBla) of approved make,shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints,curing and cleaning etc. complete. |
| 23 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x35 x5 mm angle section fitted withs liding bolts and handles for both sides, deep M.S.channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x300 x 3.15 mm minimum size and shape with square bar ,suspension shaft of minimum 32 mm diameter, hood cover of M.S.sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of wormgear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc.complete.(I.S.62481979)(Withoutmechanical gear) |
| 24 | Providing and laying telephone black /Amba White /Cadbury brown/ Rubyred /Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc.OnC.M.1:6 including filling jointswith polymer base fillernosing/ mouldingthe sharp edges wherever necessary, curing, etc. complete. |
| 25 | Providing and fixing in position anodised (as per I.S.1868/1982) alluminum sliding window of three tracks with regular pipe 95x38.10x0.90mm at weight 0.637 Kg/Rmt. and window frame bottom tracksection 92x31.75x1.30mm at weight 1.070 Kg/Rmt. Top and side track section 92x31.75x1.30mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40x18x1.25mm at weight0.417 kg/Rmt.I nter locking section 40x18x1.25mm at weight 0.469 Kg/Rmt and top section 40x18x1.25mmat weight 0.417 kg/Rmt.as per detailed drawing and as directed by Engineer.in Charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shytter including 5mm thick plain glass with all required screws and nuts etc.complete. |
| 26 | Providing And fixing mild steel grill work for window, ventilators etc.15 kg/ Sqm as per drawing including fixturs necessary welding and painting with one coats of anticorrosive paint & two coat of oil painting complete |
| 27 | Paintingletters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete. |
| 28 | Quality Control Charges |
| 29 | Add Royalty Charges Of Sand |
| 30 | Add Royalty Charges Of Hard Murum |
| 31 | Add 18 % G S TOn Materials |
