|
| 1 | Taking down cement plaster of any descriptionetc. including raking out joints, hacking for key, scrubbing down with water, etc. Including removal of debris out side MD land complete all as specified and directed by Engr-in-charge. |
| 2 | Providing and applying fair finish 15mm thick plasterwith ready mix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces ,wall surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge.Note :- (i) Liquid water proofing compound will be measured and paid seperately as supply onlyMAKE: M/s ACC Accoplast/ M/s Ultratech Readiplast/ Magicplast/ easy plast fromwall plast, chem plast |
| 3 | Supply only liquid water proofing compound. MAKE: DrFixit LW+/Ultratech WP+, Shali Plast LW+ of STP |
| 4 | Supply only approved SBR Latex polymer. Name of Manufacturer: BASF/Fosroc/Sika/ Dr Fixit(Note: Rate shall be in terms of solid contents of polymer). |
| 5 | Providing and applying fair finish 10mm thick plasterwith readymix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces, on ceiling including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge.MAKE: M/s ACC Accoplast/ M/s Ultratech Readiplast/ M/s Magicrete Magicplast/ CK Birla\"s AEROCEN |
| 6 | M & L for applying 1mm thick wall care putty in two layer on walls complete all as specified and directed by Engr-in-Charge. |
| 7 | M & L for preparing new surfaces of wall and apply two coats of distemper oil emulsionwhite or tinted over and incl one coat primer on walls complete all as specified and directed by Engr-in-Charge. |
| 8 | M & L for preparation of old wall surface and applying one coat of distemper oil emulsion white or tinted complete all as specified and directed by Engr-in-Charge. |
| 9 | M & L for preparation of newly plastered surface of ceiling and applying two coats of distemper oil emulsion, white or tinted complete all as specified and directed by Engr-in-Charge. |
| 10 | Providing & applying anti algal water-based Elastomeric exterior wall finish on newly plastered surfaces including surface preparation, applying suitable wall Prime seal primer 8-10 Sqm per ltr coverage area and application of two coats (base coat 4.2 -4.7 & top coat 6-6.5 sqm per ltr coverage area )of paint by roller etc. complete. (Make- Dr Fixit Rain coat 601, Asian paints, Berger ) |
| 11 | Complete removal of existing treatment on wall/ roof projections including facia, cornices, ceiling etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 12 | Material and labour for applying two coats of oil emulsion distemper over a coat of primer including 1mm thick wall care putty (in two layer) on old decorated surfaces of wall. Complete all as specified and directed by Engineer-In-charge. |
| 13 | Material & Labour for applying two coats of oil bound distemper on old decorated ceiling incl complete removal of existing treatment by washing, rubbing down and over 1mm thick putty in two layer complete all as specified and directed by Engineer-In-charge. |
| 14 | Material & Labour for preparing old previousely treated wooden surfaces over 10 cm of width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-In- Charge. |
| 15 | Material & Labour for prepration of old surfaceand apply one coat of synthetic enamel painton steel surfaces of any description complete all as specified and directed byEngineer-In-charge. |
| 16 | Preparation of old decorated surfaces of walls by any means scrapping old surfacewashing the surface with Bleaching powder throughly,filling the cracks with cracks filling compound as per manufacturer instruction &applying one coat of anti algal water-based Elastomeric exterior wall finishincluding scaffolding etcall as specified & directed. (Make- Dr Fixit Rain coat 601, Asian paints, Berger ) |
| 17 | Complete removal of old surfaces of walls by any means scrappingwashing the surface with Bleaching powder throughly,filling the cracks with cracks filling compound as per manufacturer instruction &applying two coat of anti algal water-based Elastomeric exterior wall finishincluding scaffolding etcall as specified & directed. (Make- Dr Fixit Rain coat 601, Asian paints, Berger ) |
| 18 | Taking downsoil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia complete all as specified and directed by Engr-in-Charge. |
| 19 | Supply and fixing PVC (SWR)110mm bore pipes in any length with rubber ring joints fixed to wall with dash through fastners and rain water bracket suitable for 110mm pipe spacing 1.5m C/C as per CE (Navy) Mumbai TD No TD/2023/01. |
| 20 | S&F PVC (SWR) PVC (SWR) branch piece, single (single Y or T) equal or unequal for 110 mm bore pipe diminishing pieces or tapers on walls complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F PVC (SWR) bends (any radius) for rain water pipes 110 mm bore diminishing pieces or tapers on walls complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement |
| 23 | M&L cleaning the existing surfaces of chequered tiles/paver blocks and applying one coat of floor guard paint (1st quality as approved by GE) complete all as specified and directed by Engr-in-charge |
| 24 | Taking out shrubs/vegetation growth from building at any height and at any location with roof and applying a glyphosat pesticide or any other equivalent persticide in a ratio of 1:50 with water on roots including taking down cement plaster not etc 0.50 sqm for each tree and making good surface by plastering the samearea with 20mm thick plastering in cement mortar 1:4 and finishing the surface to mathch existing surface with necessary scaffolding and other required T&P complete all as specified and directed by Engr-in-Charge. |
| 25 | Material & Labour for chipping, removing carefully concrete work by low impact hammer, breaker without damaging the structure and cleaning and disposal of debris out side the MoD land etc complete as directed by Engr-in-charge.Hard concrete should not be removed by force complete all as specified and directed by Engr-In- Charge. |
| 26 | Mixing and applying SBR latex modified cement mortar 25 mm thick in cement sand mortar in proportions of 1:3 (1 cement andquartz aggregate) with polymer admixed in proportions as approved, including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and as directed (Note : Rate includes the rate of steel scaffoldings. No separate payment will be paid for scaffoldings). |
| 27 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 28 | M&L pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge |
| 29 | Cutting chases, pinning in and making good to facings of brick/concrete/stone walling where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girthcomplete all as specified and asdirected by Engg-In- Charge. |
| 30 | M&L for filleting in any position and to any shape of section area exc 25 sq cm but n.exc 50 Sq cm in cement sand mortar 1:3 by complete all as specified and asdirected by Engg-In- Charge. |
| 31 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 32 | S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etcand similar work conformingFe 290 (Gde E- 165) including workingplatform/scaffolding). Complete all as specified and as directed by Engr-in-Charge |
| 33 | S&F 10 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete |
| 34 | Preparaing of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and asdirected by Engg-In- Charge. |
