Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-10-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-10-2024 |
| 2 | 01-10-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-10-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting , any guage , thickness incl nanital pattern as in roof covering |
| 2 | Dismantling Timber scantlings 40 Sqm cm over in section in any position framed work complete all as specified and directed |
| 3 | Demolation of brick work/ solid concrete block work built in Cement mortar complete |
| 4 | Demolation of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed . |
| 5 | M&L for wrought second class hard wood in scantlings framed and fixed complete all as specifiedand directed. |
| 6 | Fixing only for wrought second class hard wood in scantlings framed and fixed complete all as specifiedand directed. |
| 7 | M&L for preparation of wood and wood based material , new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified |
| 8 | S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers andfitting of same manufacture of approved profile, shape and colour complete all as specified and directed |
| 9 | M&L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screw with washers and fitting of same manufacture of approved profile , shape and colour complete all as specified and directed . |
| 10 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. |
| 11 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area n exc 1.5 sqm each complete all as specified and directed. |
| 12 | Excavation in post holes not exiting 0.5 cum, getting out in soft/loose soil, returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete in soil loose soil. |
| 13 | M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete. |
| 14 | M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed. |
| 15 | S&F 35 mm thick Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete |
| 16 | S&F 35mm thick 2nd class hard wood skelton shutters open rebated and prepare to receive glass, gauze, etc devided into squares with plain chamfered or rounded, mitred and rebatedsash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified and directed. |
| 17 | M&L for Machine cut Kota stone slab flooring 18-20 mm thick over and incl 20 mm thick cement screed bed in CM 1 : 6, laid and jointed with greay cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified |
| 18 | M&L for kota stone floor 18-20 mm thick as in skerting , set and jointed in neat cement slurry and pointed in white or coloured cement to match Complete all as specified. |
| 19 | S&F in repair for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. |
| 20 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed |
| 21 | S&F for powder coated(powder coating min 50 micron)anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified |
| 22 | M&L for 5.5 mm thick sheet rosted glass quality and glazing fixed to aluminium frame exc not 0.50 sqm complete all as specified and as directed. |
| 23 | S&F for Anodised aluminium grill (anodised transparent or dyed to requiredshade according to IS: 1868 with minimum anodic coating of gradeAC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainlesssteel screws @ 200 mm centre to centre, including cutting the grill toproper opening size for fixing and operation of handles and fixingapproved anodised aluminium standard section around theopening, all complete as per requirement and direction of Engineer in-charg |
| 24 | S&F, 150 mmaluminium handles cast type, anodised complete all as specified and as directed. |
| 25 | S&F, 125 mmaluminium handles cast type, anodised complete all as specified and as directed. |
| 26 | S&F Butt hinges of 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed. |
| 27 | S&F aluminium anodised barrel bolts and fixed of 150 mm length complete all as specified and directed. |
| 28 | S&F 100 mm stainless steel but hinges medium wtsteel hinge pin, bright polished and fixed |
| 29 | S&F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed |
| 30 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 31 | S&F for floor door stopper withalluminium alloybody anf tongue,with hard drawn steel spring 140mm long complete all as specified. (Make-Kitch/Arch/Q-rail/D-line) |
| 32 | M&L forpreparation of new steel surfaces of any description ,over 10 cm in width or girth,not otherwise described and applyingtwo coat of synthetic enamel paint over a coat red oxide primer all as specified. |
| 33 | M&L for rendering 15mm thick in CM (1:4) in two coats (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately. |
| 34 | M&L for Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 35 | M&L for 10 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement. |
| 36 | M & L for RCC M 20 (20mm graded aggregates) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed by the Engineer-in-Charge. |
| 37 | M & L for RCC M 25 (20mm graded aggregates) in Columns, pillars, piers, posts and struts all as specified and as directed by the Engineer-in-Charge. |
| 38 | M & L for RCC M 25 (20mm graded aggregates) in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and as directed by the Engineer-in-Charge. |
| 39 | M & L for RCC M 25 (20mm graded aggregates) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed by the Engineer-in-Charge. |
| 40 | M & L for RCC M 25 (20mm graded aggregates) in Chajjas all as specified and as directed by the Engineer-in-Charge. |
| 41 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter |
| 42 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions |
| 43 | M&L for Formwork to chullah hoods, chajjas, troughs and similar items includingedges |
| 44 | M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge |
| 45 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. |
| 46 | M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, as roughed finished surface of concrete complete all as specified and as directed by the Engineer-in-Charge |
| 47 | M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge |
| 48 | Ditto, but 6mm to 8mm dia |
| 49 | M & L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge |
| 50 | S & F Aluminium Powder coated (Colour) section forin door, window, Ventilator, glazed with aluminium shutter weighting 0.55Kg/M including 2nos matching handle necessary fitting of suitable size , one or more rebates, cut to jointed together with cadmium lated steel screws including rubber bending of gasket for aluminium section for fixing glass/jali and necessadry fitting, screws plugs for fixing screws etc complete and all as specified or as directed by Engr in charge |
| 51 | S&F oval type wash hand basin vitreous China flat back 550x400mm size white,including PVC waste coupling 32mm size, PVC corrugated waste pipe 32mm bore, pair of brackets of mild steel 35 x 35 x 6mm size complete all as specified and directed by Engineer-in-Charge.Make: HINDWARE/PARRYWARE/ FOR WHB, PRAYAG FOR PVC FITTINGS. |
| 52 | S&F vitreous China wash down (EWC) water closet pan (pedestal pattern) with S or P trap, white including flushing 10 ltr capacity cistern and flush pipe and plastic water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, fixing bolt for pedestal pattern complete all as specfied and directed. |
| 53 | S&F in repair Health faucet(ABS Body)mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 54 | S& for PVC connections 15mm size with PTMT nuts of length 450mm |
| 55 | S&F stop valve/angle cock, cast copper alloy screwed down high pressure with crutch or butterflyhandle screwed both ends for iron pipe of 15mm bore |
| 56 | S&F 15 mmdia brass chromium plated , Centre hole mixerfancy type, cast copper alloy or as specified or as directed. |
| 57 | S&F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers mke Modi Guard |
| 58 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 59 | S&F 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc complete all as specified and directed |
| 60 | S&F for CP brass Tubular towel rail 20mm with one pair of CP Bracket dia 600 mm long |
| 61 | S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified or as directed. |
| 62 | S&F forPVC (SWR) pipes 100/110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 63 | S&F forPVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 64 | S&F for PVC (SWR) bends 100/110mm dia any radius |
| 65 | S&F for PVC (SWR) bends 75mm dia any radius |
| 66 | S&F for PVC (SWR) junction single/double equal or unequa 75mm dia |
| 67 | S&F for PVC (SWR) junction single/double equal or unequa 100/110mm dia |
| 68 | S&F for PVC (SWR) vent cowl 75mm dia |
| 69 | S&F for 15mm bore galvanised steel water tubing with all fittings \"medium grade\" and fixed complete to wall and ceiling or laid in floors including cutting and chassis the wall. |
| 70 | S&F for 20mm bore galvanised steel water tubing with all fittings \"medium grade\" and fixed complete to wall and ceiling or laid in floors including cutting and chassis the wall. |
| 71 | M&L for preparation ofnewly plastered surfaces of wall and applying three coats of white wash complete all as spd. |
| 72 | M&L for preparation ofnewly plastered surfaces of ceiling and applying three coats of white wash complete all as spd. |
| 73 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paintover a coat of cement primer complete all as specified and directed by Engineer-in-Charge. |
| 74 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified |
| 75 | M&L for 15mm thick water proofing plastering on flat/sloped surfaces on RCC roof whilest concrete is still green in CM 1:3 finished even and smooth complete all as specified.(water proofing will be paid for seprately). |
| 76 | Supply & providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and described as under:-(a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all asper manufacturer\"s specification complete all as specified and directed.(b) Supply & providing water proofing treatment with polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100micron HMHDPE film centre core including coating the surface with the bitumen 85/25 @ 1.20 Kg/Sqm and torch application of membrane with 10cm overlaps and longitudinal edges 15 cm at the ends and cutting grooves in wall for inserting tar felt if required complete job as per requirement as required thereof, complete all as specified & directed. |
| 77 | Supply only liquid water proofing compound |
| 78 | Supply and fix bib taps 15 mm bore chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. Make-Jaquar(Queens) all as specified and as directed by Engineer-in-Charge. |
| 79 | S&F for 500 liters capacity rotational moulded polyethylene water storage tanks (cylindrical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I and as directed by Engineer-in-Charge. |
| 80 | S&F 20mm bore brass gate valves,with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 81 | S&F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight-210gms) complete all as specified and as directed by Engineer-in-Charge. |
| 82 | M&L for concrete bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 150mm dia pipes. |
| 83 | Cutting openings, through brick /block walls for door, window and other openings orenlarging existing openings. converting window into door openings, etc. or cutting outdefective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc to store and rubbish not exc. 50m |
| 84 | S & F in repair chromium plated shower rose withor without swivel joints, any size, includingfixingto steel pipeor union size 125 mmcomplete Model No:F 7010305 of Cera, Hindware Model No F160006 , Parryware Model No T9985 A1all as specified or as directed. |
| 85 | S&F in repairs 3 in 1 Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 86 | Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed |
| 87 | M&L for 18/19mm thick Block boards, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work |
| 88 | S&F for .9mm thick Decorative sunmica laminates type I, or surface finish, colour and pattern as approved |
| 89 | M&L for PCC 1:3:6 type C-2 (using 20 mm graded stone aggr ), 75 mm thick as in plinth protection finished even and smooth without using extra cement layed in bays not exc.2.00 complete all as specified. |
| 90 | M&L for pre-cast PCC solid block walling with cement concrete type C1 (1:3:6, using 20 mm graded crushed stone aggregrates) exc.10cm in width and setting in cement mortar 1:6,complete all as specified and as directed. |
| 91 | M / Lprecast cement concrete block massonry with solid blocks nexc 10 cm in width and setting in CM 1:4 type C1 1:3 :6 (20mm graded aggregate ) complete all as specified . |
| 92 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete |
| 93 | M&L for preparation of old wall surfaceand applying two finishing coat of oil bound distempering over 1mm of wall care puttyand one coat of wall primer and complete all as specified and directed. |
| 94 | Material & Labour for applying Two or more coats (over 1 mm thickwall care putty ) of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. on old or previously untreated surface all as specified and directed . |
| 95 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165all as specified and as directed |
| 96 | M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains all as specified & directed. |
| 97 | Supply only Integral waterproofing compound |
| 98 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment in floor over andincluding 20 mm thick screed bed in cement moter 1:6 complete all as specifide |
| 99 | M & L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate as in sub base to floor finished rough to receive finishes. complete all as specified and as directed by the Engineer-in-Charge |
| 100 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft loose soil. |
| 101 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified |
| 102 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soft loose soil. |
| 103 | M&L for Treating the bottom & verticle sides surafce of excavation at the rate of 5 litres of emulsion per square metre of surface area |
| 104 | M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area |
| 105 | M & L for Brickwork with fly ash bricks old brick size, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge |
| 106 | M & L for damp proof course to horizontal or vertical surfaces including necessary formwork, 40mm thick, in cement concrete 1:2:4 type B0 complete all as specified and as directed by the Engineer-in-Charge |
| 107 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed |
| 108 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm thick rendering in CM 1:4 complete all as specified and as directed |
| 109 | M & L for Joint free Glazed Coloured Ceramic tiles in vertical surface of size 450x300mm & 7-8mm thick set and joint in neat cement slury and pointed in white or colour cement to match includingrendering 10mm thick in cement plaster 1:4 finished rough to receive finishes. complete all as specified and as directed by the Engineer-in-Charge |
| 110 | M & L for joint free Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match completeincluding 20mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, all as specified and as directed by the Engineer-in-Charge |
| 111 | M&L for preparation of new plastered surface of walls and applying two coats of acrylic distemper over a coat of alkali resistant priming paint complete all as specified and directed. |
| 112 | M&L for 2 Coats of cement base paint over a coat of primer incl prepration of newly plastered surface on wall. |
| 113 | M & L for hardcore of broken brick/stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified |
| 114 | S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm. |
| 115 | S&F Extruded Aluminium, anodised, bow handles of size 150mm. |
| 116 | S&F aluminium anodised barrel bolts and fixed of 200 mm length |
| 117 | S & F for Steel work in tubular trusses with support posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 of Fe 410-W (GdeE- 250) quality A complete all as specified and as directed. |
| 118 | M&L for 4mm thick non asbestos fiber cement building boards 600x600 mmprepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-chargefixed or laid in ceiling timber /GI/ aluminiumframe work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed. |
| 119 | S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide withbrass chromium plated bracket guard and railing 60cm long.(Make : Cardin/chilly. |
| 120 | Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each all as specified |
| 121 | Taking down shutters of any descriptionexc 1.0 Sqm and nexc 2 sqm refixing in same openingcomplete. |
| 122 | S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, decorative face veneer with lipping/frame to matchon both sides . |
| 123 | M&L for 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 124 | M&L for 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats |
| 125 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets |
| 126 | S&F Anodised Aluminiumframe work for snap grid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to mainT, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness Aluminium frame will be 60 x 60 cm to recieve ceiling board complete all as specified and as directed . |
| 127 | S&F 3 mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 128 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 129 | M&L for rendering 15mm thick in CM (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed |
| 130 | M & L for Rendering 10mm thick in Cement plaster 1:3 on ceilings, finished even and smooth without using extracement complete all as specified and as directed by the Engineer-in-Charge. |
| 131 | Complete removal of existing wall treatment surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfaces complete |
| 132 | Complete removal of existing treatment on old wall surfaces and applyingtwo finishing coat of oil bound distempering over 1mm of wall care putty complete. |
| 133 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applyingone coat of synthetic enamel paint complete all as specified and directed. |
| 134 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 135 | M&L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 136 | Ditto in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section unframed work. |
| 137 | M&L 2nd class hard wood in scantling clean sawn timber fixed all as specified. |
| 138 | M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated withTwo coats ofCreosote |
| 139 | M & L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors finished, surface even and smooth without using extra cement, complete all as specified. |
| 140 | Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete. |
| 141 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar |
| 142 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. |
| 143 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 144 | M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 145 | M & L applying two coat of distemper oil emulsion white or tinted on newly decorated or undecorated wall surface including preparation ofsurfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified. |
| 146 | M&L Two coats of weather coat exterior paint on new plastered wall surfaces Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified |
| 147 | S&F framed work such as grills, gratings etc with ends of bars shouldered or riveteted or foged into spikes, framed guard bars conforming to FE 290 Gde E-165 complete all as specified and directed. |
| 148 | Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia X 3 M effective depth |
| 149 | Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star ratedvertical type includng fixing of bolts , nuts grouted into the wall, and necessary cement work , making good of disturbed surface of wall, giving electric and water connection and testing after installation all as specified and directed.Make Havells/CCrompton/Bajaj or equivalent |
| 150 | Wiring for circuit / sub main wiring along with earth wire with the followingsizes of FRLSH is PVC insulated copper conductor, single core cable in casing caping as required 2 x 4 sq mm 1 x4 Sq mm earth wire complete all as specified and as directed. |
| 151 | Switch socket combination15 Ampscomplete all as specified and as directed |
| 152 | S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia all as specified and directed. |
| 153 | Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe all as specified and directed. |
| 154 | Supply and Fix of Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) all as specified and directed |
| 155 | Supply and fixbib tap 15mm dia, outer thread, cst copper alloy chromium plated complete inclusive 15mm dia GI socket and all incoming water connection and testing for entire satisfaction for Engr-in-Charge |
| 156 | Supply and install hi wall split units indoor / outdoor complete with cordless remote control unit and with in built Heating and cooling arrangement and Digital Inverter twin rotary of capacity 1.5 TR, single phase 5 star rated Make : Voltas/LG or equivalent |
| 157 | Supply and fixing voltage stablizer for automatic operation, single phase, naturally air cooled, indoor type, dsigned for input variation between having input voltage 130 V to 280 V, with output voltage stablized at 230 V with accuracy of (+/-) 25% with time delay and digital display with auth scroll input and output voltage complete and of capacity 5 KVA. Make : V Guard / Microtek / Luminous |
| 158 | S&F sheet metal enclosure SPN 240 Volts having 2 pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified and directed. Make : Havells / L&T / Legrand |
| 159 | Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified. |
| 160 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitablesteel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existingfor one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . |
| 161 | All as per item No 2 here-in-before but for one 2/3 pin socket outlet, 5 Amps on independent board, complete all as per specified and as directed. |
| 162 | Description all as per Srl item No.2 here in before but for socket outlet point 5 Amp on same board. |
| 163 | Supply and fix switch piano (ISI marked) Single pole 240 volts,5Amps all as specified and directed. |
| 164 | Supply and fix socket(ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. |
| 165 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. |
| 166 | Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wallwith 2 nos PVC block of suitable size including taking down old unserviceable one . |
| 167 | Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket, clamps etc complete all as specified and directed |
| 168 | S&F lamp holder, insulated body, with back plate for batten fittingcomplete. |
| 169 | Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one all as directed. |
| 170 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity \"C\" seriescomplete all as specified and directed including taking down old one. |
| 171 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB\"s |
| 172 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavyduty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overallPVC sheathed 10 sq. mm 2 corenominal cross section in service connections |
| 173 | Supply, laying & testing cable XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground withstranded aluminumconductor16 sqmm 2 Core 1100 Volts gradeincluding laid in trenches,earth work/excavation, sand filling, bricks/ duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. |
| 174 | All as per Item No. 1 here-in-before but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 2.5 sqmm for one power point ,3 pin 15 Amps on independent board includingFRLSH, ISI marked PVC insulatedunsheathed single core multi-stranded copper cable of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga. |
| 175 | Description all as per Srl item No.2 here in before but with 2.5 Sqmm cable for socket outletpoint 5 Amp on independent board. |
| 176 | Supply and fixing modular switch with piano type 1 way 6A moduler frame and cover 230/250 volt , AC supply,ISI Marked,complete all as specified and directed. |
| 177 | Supply and fixing modular sockets outlet 6A 2/3 pin combined 2 moduler frame and cover 230/250 Volts,50 Hz , AC supply, ISI Marked, complete all as specified and directed. |
| 178 | Supply and fixing sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, complete all as specified and directed. |
| 179 | Supply and fixingswitch 16A1 module 230/250 Volts,50 Hz , AC supply, ISI Marked, complete all as specified and directed. |
| 180 | Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wallwith 2 nos PVC block of suitable size including taking down old unserviceable one . |
| 181 | Supply and fix MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated and IP 43 and IK 09 protection, SPN DB 4 way with 200/100 Amps rated busbar with neutral link, dust and vermin proof, suitable for incorporation of MCBs & isolated etc and making all necessary connections , duly flush of wall surfaces, complete all as specified and directed. |
| 182 | Supply and fix MCB, C cueved type,10KA, SP 6 to 32 Amps, SSPN with over load and short circuit protection,fixed in DBs Make : Hageras per cat part- NCN106N, Schneider as per cat No : A9N4P32C or Indoasian as per cat No : 81195.complete all as specified and directed. |
| 183 | Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable with and incl 4 sqmm (nominal area) FRLSH , ISI marked, PVC insulated multistranded copper conductor cable as earth wire conected with thimble from main DB to sub main DB. drawn into separate concealed medium grade ISI marked, non metalic PVC conduit 15mm dia size incl all conduit accessories and fittings/ junction boxes/ inspection covered etc, with and incl cutting chasing and making good of disturbed surfaces of wall/floor/ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. |
| 184 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz , RPM 1200, copper winding of sweep 300m incl making all electric connection , cutting of hole on wall and making good disturbed surfaced of wall complete all as specified and as directed. |
| 185 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I. |
| 186 | Supply and fix MCB, C curved type, 10 KA, 6 to 16 Amps, SP with over load and short circuit protection, complete all as specified and as directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
