|
| 1 | Dismantling Plain corrugated steel sheeting, any gauge, thickness, including, Nanital or similar pattern roof covering etc complete all as specified and as directed. |
| 2 | Demolition of reed lathing single or double including battens and plaster or chicken wire lathing etc complete all as specified and as directed. |
| 3 | Dismantling timber scantlings 40 sqcm and over in section,as in unframed work in any position etc complete all as specified and as directed. |
| 4 | Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc complete all as specified and as directed. |
| 5 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer boardE-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping etc complete all as specified and as directed. |
| 6 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications etc complete all as specified and as directed. |
| 7 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification etc complete all as specified and as directed. |
| 8 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roofcovering /cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 9 | S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed. |
| 11 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 etc complete all as specified and as directed. |
| 12 | M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A etc complete all as specified and as directed. |
| 13 | S & F second class hardwood weather boarding, clean sawn, plain, 25 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps etc complete all as specified and as directed. |
| 14 | M&L for second class hardwood as in scantlings clean sawn timberfixed etc complete all as specified and as directed. |
| 15 | M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13and n.exc 25 sqcm etc complete all as specified and as directed. |
| 16 | M&L for rendering 15 mm thick in CM (1:4) on one side of lathing finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 17 | M&L for rendering 12 mm thick in CM (1:6) on other side of lathing finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 18 | S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple etc complete all as specified and as directed. |
| 19 | Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm eachetc complete all as specified and as directed. |
| 20 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames etc complete all as specified and as directed. |
| 21 | Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed. |
| 22 | S&F factory made 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels etc complete all as specified and as directed. |
| 23 | M&L for factory made 35mm thick 2nd class hard woodGlazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) etc complete all as specified and as directed. |
| 24 | S&F Powder Coating aluminium( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 25 | S&F for powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, handle , tower bolt anodised aluminium snap beading, screws etc complete all as specified and as directed. |
| 26 | M&L for sheet glass4mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane etc complete all as specified and as directed. |
| 27 | S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed. |
| 28 | S & F 100 size stainless steel butt hinges etc complete all as specified and as directed. |
| 29 | S & F 75 size stainless steel butt hinges etc complete all as specified and as directed. |
| 30 | Supply & Fixing150 mm Aluminium handles, cast type, anodised etc complete all as specified and as directed. |
| 31 | Supply & Fixing100 mm Aluminium handles, cast type, anodisedetc complete all as specified and as directed. |
| 32 | S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixedetc complete all as specified and as directed. |
| 33 | S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and as directed. |
| 34 | S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixedetc complete all as specified and as directed. |
| 35 | S&F in repairs mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed. |
| 36 | Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 37 | M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished fair and even without using extra cement etc complete all as specified and as directed. |
| 38 | M&L for rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 39 | M&L for preparation of new plastered or un plasteredsurface of walls including cornices, pilasters etc and applying two coats of cement base paint incl primer etc complete all as specified and as directed. |
| 40 | M&L for 2 mmthick Birla white putty/JK white wall care putty on walls etc complete all as specified and as directed. |
| 41 | M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface etc complete all as specified and as directed. |
| 42 | M&L for preparation of newsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying two coat of synthetic enamel paint over a coat of red oxide primeron new surfaces in any tint etc complete all as specified and as directed. |
| 43 | All as per item No. 42.00 (here-in-before) but applying two coats of synthetic enamel paint over a coat of pink wood primer on new wooden surfaces. |
| 44 | M&L for preparation of oldsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying one coat of synthetic enamel paint in any tint etc complete all as specified and as directed. |
| 45 | M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint etc complete all as specified and as directed. |
| 46 | M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oilbound distemper on walls.etc complete all as specified and as directed. |
| 47 | M&L preparation of old surfaces of wallsapplying one coat of cement base paint etc complete all as specified and as directed. |
| 48 | Demolition, Cement concreteof any description and in any position not otherwise specifically provided for etc complete all as specified and as directed. |
| 49 | M&L for 75 mm thick PCC (1:3:6) type C-2 , (using 40 mm graded stone aggregate)as in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) etc complete all as specified and as directed. |
| 50 | M&L for cement concrete type C-2 (1:3:6) (using 40 mm graded stone agg) as in surface channels and drains etc complete all as specified and as directed. |
| 51 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms mouldsetc complete all as specified and as directed. |
| 52 | S&F 20mm diaHarrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 53 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and as directed. |
| 54 | Material & labour for brick work with sub class \"B\" bricks (using old size burnt bricks)straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and as directed. |
| 55 | Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed. |
| 56 | M & L for PCC 25mm thick type B-0, (1:2:4) (using 12.5 mm graded stone aggregate)as in levelling corse of floor etc complete all as specified and as directed. |
| 57 | M&L for Coloured /light shade vitrified ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles exc 0.18 sqm but not exc 0.36 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shde of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and as directed. |
| 58 | All as per Item No. 57.00(here-in-before) but in skirting etc fixed over and including 10 mm thick bedding layer in CM 1:4. |
| 59 | M&L for sheet glass 3mm thick ordinary quality,and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane etc complete all as specified and as directed. |
| 60 | M&L for PCC (1:4:8) type D-2 ,75 mm thick (using 40mm graded stone agg) as in sub base of floor etc complete all as specified and as directed. |
| 61 | M&L for Virified Ceramic tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm butnot exceeding 0.36 sqm,as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc laidover and including screed bed of 15 mm thick 1:6 CM etc complete all as specified and as directed. |
| 62 | All as per Item No. 61.00(here-in-before) but in vertical surface etc laid over and including 10 mm thick bedding layer in CM (1:4). |
| 63 | M&L Brick work with sub class B brick(using old size burnt bricks) straight or curved on plan exc 6.00 m mean radious built in CM 1:6 etc complete all as specified and as directed. |
| 64 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of Soil etc complete all as specified and as directed. |
| 65 | Returning, filling in soil incl watering, well ramming,etc complete all as specified and as directed. |
| 66 | Removing excavated soil to a dist n.exc.50m and depositing where directed at a level n. exc 1.50m above the starting points etc complete all as specified and as directed. |
| 67 | Taking down carefullycopper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed. |
| 68 | M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep etc complete all as specified and as directed. |
| 69 | (a) Onelight/Fan pointcontrolled by one, one way switch . |
| 70 | (b) One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 71 | (c) One 3 pin socket outlet 5 Amps on the independent board |
| 72 | All as per item No- 68 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. Make : Richa/Finolex/RR Kabel, Make of Caping & Casing : Prestoplast /Richa /Supreme |
| 73 | M&L for Switch piano flush type single pole, one way 6A etc complete all as specified and as directed. |
| 74 | M&L for Socket outlet, 2 in 1, 5 pin 5A flush type etc complete all as specified and as directed. |
| 75 | M&L for Switch Socket combination, 2 in 1, 3 pin 6A flush type etc complete all as specified and as directed. |
| 76 | M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type etc complete all as specified and as directed. |
| 77 | M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and as directed. |
| 78 | M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. |
| 79 | M&L for sub main wiring with two runs of 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors of , 1100 volts grade, drawn throughand including PVC double locked Casing & caping incl taking down old unsv complete all as specified and as directed. |
| 80 | S&F for, LED light fitting 1 x20 W (4 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed. |
| 81 | S&F for, LED light fitting 1 x9 W (2 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed. |
| 82 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and connecting up with driver, three core flexible copper conductor of suitable size incl taking down complete all as specified and as directed. |
| 83 | Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting incl taking down complete all as specified and directed by Engr-in-Charge. |
| 84 | M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, withneutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs complete all as specified and as directed. |
| 85 | M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, withneutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs complete all as specified and as directed. |
| 86 | M&L for MCB SPN 40 Amps \"C\" series, 230 volts, 50 Hz suitable for fixing in MCB DBincl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408636 or equivalent in ABB/Siemens |
| 87 | M&L for MCB SPN 40 Amps \"C\" series, 230 volts, 50 Hz suitable for fixing in MCB DBincl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408636 or equivalent in ABB/Siemens |
| 88 | M&L for MCB SP 6-32 Amps \"C\" series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408587-95 or equivalent in ABB/Siemens |
| 89 | Supply & Fixing 1200mm BLDC 5 star ceiling fan with regulator enable motor powerinput 27 watt with 10% tolerance , motor insulation B type , 230-240V 50Hz AC supply 350 rpm ,225 CMMair delivery, service value minimum 7.4 with complete set 3 blade , canopy,down rod , Shackle remaining all accessories including nut & bolt washer as required & directed . Make :Khaitan, Bajaj, Havell\"s, OrientNote : Old Ceiling fan shall be deposited to MES Store (AGE E/M) |
| 90 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.Note : Old Exhaust Fan shall be deposited to MES Store (AGE E/M) |
| 91 | Supply and fixing PVC Exhaust fan PVC200 mm sweep single phase 50 Hz AC, air flow rate of1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified anddirected by Engr-in-Charge. |
| 92 | Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. Make : Havells/Richa/Gloster |
| 93 | M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken. |
| 94 | M&L for laying brick sub class \"B\" old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed |
| 95 | Supply & laying tubes \" Light grade\" galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 25 mm dia bore complete all as specified and as directed. |
| 96 | Supply & laying tubes \" Medium grade\" galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. |
| 97 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate NRV, connection piece etc complete all as specified and as directed. |
| 98 | M&L for cross arms, bracings, supports, clamps and back plates fabricated from steel section including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive ofone primer coat, one under coat and one finishing coat of synthetic aluminium paint. (For MS Clamps and Hooks) etc complete all as specified and as directed. |
| 99 | M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i)The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 m thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSRPart-II. (ii)Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable |
| 100 | S&Finstallation and testing and commissioning of Split type inverter Air conditionerof capacity 1.5 ton rating 5 star with cordless remote operated on 230 Volt AC supply complete to wall with suitable bracket for indoor outdoor unit and connected with electric suply, testing on full load etc complete all as specified and as directed. |
| 101 | Supply and fixing Voltage stablizer for automatic operation single phase indoor type and designed for input variation between 160-260V ISI marked volts with digital disply out put voltage stablizer at 230 Volts with energy of± 2.5 % and of capacity 5 KVA etc complete all as specified and as directed. |
| 102 | M&L for metal clad AC socket point single pole and neutralenclosure with a tow pin and earth plug and socket complete with one single pole MCB SP 20 Amps etc complete all as specified and as directed. |
| 103 | S&Fand testing factory made sheet metal enclosurefor MCB DB TPN 4 way 415 volt with double door, IP - 43 protectionduly withfixed in wall/ concealed in wall complete and making good disturbed surfaces of wall, floor etc including electric wire connectionetc complete all as specified and as directed. |
| 104 | S&F MCB triple pole and neutral 415 volts 63 amps, with rupturing capacity 10 KA, \"B\" curve type, with over load and short circuit protection etc complete all as specified and as directed. |
