Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-10-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-10-2024 |
| 2 | 07-10-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-10-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store complete all as specified and directed. |
| 3 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.Brushing neat cement slurry with 3.0kg of cement per SQM complete all as specified and directed. |
| 4 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified & directed. |
| 5 | Taking down cement or cement lime plaster, anydescription on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water and removal of debris complete all as specified and directed. |
| 6 | Demolition of reinforced cement concrete by means of concrete cutter of any description n. exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 7 | Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided ccomplete all as specified and directed. |
| 9 | Demolition of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 10 | Dismantling of boarding any description fixed in any position complete all as specified and directed. |
| 11 | Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5sqm each and making good to disturbed surfacescomplete all as specified and as directed by the Engineer-in-Charge. |
| 12 | Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5sqm but not exceeding 4.0sqm each and making good to disturbed surfacescomplete all as specified and directed by the Engineer-in-Charge. |
| 13 | Supply and fix, factory made pressed steel frames for doors with two rebates, of size 125mmx60mm, made out of 1.25mmthick sheet,including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 14 | Supply and fix, factory made pressed steel frames for doors with one or more rebates, of size 105mmx60mm, made out of 1.25mmthick sheet,including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 15 | S & F for aluminum powder coated (powder coated of required colour) three track (2 Nos Glazed shutter & 1 Nos Gauzed shutter) sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.75 x 1.50mm (Section of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and directed. |
| 16 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,Aluminium Louvers all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 17 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plainflushdoor shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 18 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ S & F Ceosetory windows and other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 19 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plainflush Cup board door shutter of size 18mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 20 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush type as in shelves of 18mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant fixed over stainless steel L shaped brackets which should withhold as average weight of 20-30 Kg and fixed with ecessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 21 | S & F factory made Flush shutters 35mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed. |
| 22 | S & F factory made Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed. |
| 23 | S&F factory made Second class hardwood halfglazed and half panneleddoor shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, and half pannelwith 9mm BWP commercial plyetc complete all as specified and directed. |
| 24 | S&F 75mm size aluminium anodiesd Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 25 | S&F door seal aluminium rod with nylon brush of approved colour fixed to shutter with and incl 20 mm steel wooden screws complete all as specified and directed. |
| 26 | S&FFloor door stopper doubled legedof aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 27 | S&F in repair MS Chroumium plated curtain rod 25 mm diawith and incl MS Chromium plated decorative round funnals on either end and provide a visually balanced appearance incl MS Chromium plated brackets fixed to wall with 30mm wooden steel screws and PVC rawal plug anchors and installation complete all as specified and directed. |
| 28 | S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed completeall as specified and as directed. |
| 29 | S&F 200 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed completeall as specified and as directed. |
| 30 | S&F 250mm length of bolt, aluminium alloy, anodized,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & as directed. |
| 31 | S&F 100mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed to PVC door complete all as specified & as directed. |
| 32 | S&F mild steel 300mm size, ordinary rat tail rod pattern springs, including roller and roller plate completeall as specified and as directed. |
| 33 | S&F 125mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed. |
| 34 | S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed. |
| 35 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withfixed withsteel wire staples complete all as specified & directed. |
| 36 | S&F4mm thick frosted sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5sq. m in each panecomplete all as specified and as directed. |
| 37 | S & F stainless steel soft close hydraullic clip concealed cabinet hinges fixed with stainless steel screw complete all as specified |
| 38 | S & F Stainless steel Magnetic door catcher Magnet of size 50x15mm fixed with stainless steel screw on shelf/sides wall and shutter complete all as specified and as directed |
| 39 | S & FNikel chromium finished Drawer channel of regular close ball bearing of heavy duty for kitchen drawer of weighing capacity of 45 Kg complete all as specified and as directed |
| 40 | S & F 75mm Stainless steel chromium plated fancy type handle for cupboard/cabinets fixed with scres and nut complete all as specified and as directed |
| 41 | Cutting holes in brick walls built in cement or cement lime mortar for inserting hold fasts, etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1, cutting exceeding half brick but not exceeding one brick complete. |
| 42 | M & L forBands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 43 | Material & labour for false ceiling with GI frame work for EXPOSED GRID SYSTEM of grid size 600 mm x 600 mm, GI powder coating at bottom and comprising of GI perimeter wall angle with two equal flanges of 25 mm fixed to surrounding wall / partition using nylon sleeves and screws at 450 mm centre to centre. Main Tee 0.55 mm thick having 35 mm wide flange and 25 mm high web suspended from the soffit @ 1200 mm centre to centre with level clip with wire of 4 mm dia, Cross Tee - 1200, 0.55 mm thick having 35 mm wide flange and 25 mm high web inserted fixed into the slots of Main \"T\" @ 600 mm centre to centre to form a grid of 1200 mm x 600 mm, Cross Tee - 600, 0.55 mm thick having 35 mm wide flange and 25 mm high web shall be placed perpendicular to the Cross Tee - 1200 to finally form a grid of 600 mm x 600 mm . complete all as per manufacturer instructions and all as shown on Drawing No. CESZ/2019/TD-42, Sheet No. 1/1complete all as specified and directed. |
| 44 | S&F4mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 2 to 3 mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips, hold down clips, with provision of ligh fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc. complete all as per manufacturer instructions and all as shown on Drawing No. CESZ/2019/TD-42, Sheet No. 1/1 complete all as specified and directed. |
| 45 | S & FRolledmild steel sections conforming to Fe 410 (GdeE250 ) quality A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates complete. |
| 46 | M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 47 | M&LPre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 48 | M&L for 15mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 49 | S&F in reapir Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 560x430x203 and bowl size 510x405x203, with and including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces complete all as specified and directed. |
| 50 | M/LForm work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, for rough finished flat surfaces of concrete complete. |
| 51 | M&L RCC 1:2:4 Nominal mix B-1(20mm graded aggregate) as in as in slabsupported on walls beams & columns in floors, roofs, landings, balconies, canopies, deck slabs & in shelves & the like etc complete all as specified and directed |
| 52 | M&L TMT bars 8 to 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire complete all as specified and directed. |
| 53 | S&F framed work such as griils, grating, angle iron door frames etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, laders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified and as directed. |
| 54 | M&L Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 55 | M&L for brick work with sub class old size \"B\" bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete as specified and directed. |
| 56 | M&L for rendering 10.mm thick plaster in cm 1:6 on fair faces of brick work or concrete surfacesincluding finishing top even and fair complete all as specified & directed. |
| 57 | Rendering in two layers (10+5) 15 mm thick on brick or concrete surfaces in cement mortar (1:4) mixed with 3% of WPC in top layer andfinished even and fair without using extra cement ,including necessary scafolding and form works, upto first floor complete all as specified and directed.(Note : WPC shall be measured and paid seperately) |
| 58 | M & L rendering 5 mm thick on ceiling in CM(1:3) finished even and smooth without using extra cement complete all as specified and directed. |
| 59 | Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed.Note: The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required upto 7.00 Mtr height building. |
| 60 | M & L for 50 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection/pavings/shafts including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm complete all as specified and directed. |
| 61 | M & L Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in Hardstanding/ Footpath/ shaft pavings , 75mm thick, finished even and fair complete all as specified and directed. |
| 62 | M & LChequered cement concrete tiles with grey pigment cement and pigments in equal proportions and no pigments200mm x200mm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm screed bed with cement mortar (1:6) for laying floor finishes complete all as specified and directed. |
| 63 | M & LCement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in surface channels and drains complete all as specified and directed. |
| 64 | M&LExtra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 65 | M & LPrecast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in manhole perforated cover slab including necessary moulds and setting in cement mortar 1:4 complete.(Note :reinforcement to be measured separately) |
| 66 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out soft/loose soil complete all as specified and directed. |
| 67 | Returning, filling in excavated approved soil,(soft/loose soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm each ccomplete all as specified and directed. |
| 68 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 69 | S&F of 150 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/ trenchs and making good complete all as specified and directed. |
| 70 | Demolition of lime concrete/ lean concrete/ brick bats from sunken portion exc. 15 cm thickness (above ground level), including removal of rubbish outside MoD land, complete all as specified. |
| 71 | Roughening surfaces of sunken floor by sweeping clean and washing down with water to remove dust etc incl brushing neat cement slurry with 3.0 Kg of cement per sq metre and renderning 5mm thick in cement mortar 1:3 mised with water proofing compound as per manufacturers instruction and Applying evenly a coat of blown type bitumen at the rate of 1.5 Kg per sqm and blinding with clean dry sand @ 0.05cum per sqm and laying of black polythene film 150 micron thick laid over a coat of bitumen primer @ 0.30 to 0.5 Kg per Sqm in sunken surface complete all as specified and as directed. (Note : WPC Shall be measured and paid seperately) |
| 72 | M & L for PCC (1:2:4), type B-1, using 20 mm graded mechanically crushed stone aggregates,as in padding concrete to sunken floor, covering to junction of floor and vertical walls includingchamfering on edges complete all as specified and directed. |
| 73 | Supply only integral water proofing compoundcomplete all as specified and directed. |
| 74 | S & F of Steel water tubes, 40 mm bore, light grade, galvanized, as in spoutfor sunken floor, fixed in wall, inside end fixed with wire netting and external beveled edge at 45 degree, complete all as specified and directed. |
| 75 | M & L for Lean concrete (1:5:10), type E-2, using40 mm brick coarse aggregate, as in fundation and sunken portion complete all as specified and directed. |
| 76 | M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.50mm graded stone aggregates), in sub base of floors, finished even & fair to receive bedding layer of cement mortar completeall as specified and directed. |
| 77 | M&L for glazed coloured ceramic tiles in vertical surface 450x300 x 7-8 mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over and including 10 mm thick rendering as in backing wall plaster in cement mortar (1:4) complete all as specified & directed. |
| 78 | M&L for coloured Anti skid joint free ceramic tiles of 7mm to 8mm thick (Approx Size 300x300) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified & directed. |
| 79 | M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick (Approx Size 400x400) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified & directed. |
| 80 | M&L for coloured Matt finishedjoint finished ceramic tiles of 7mm to 8mm thick (Appx size 600mmx600mm) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified & directed. |
| 81 | M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqmset and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick renderingin cement mortar 1:4 for vertical surfaces such as skirting etc complete all as specified & directed. |
| 82 | M & L Green Marble work 18 to 20mm thick (table rubbed and polished) in corner shelf design/ Rectangle design fixed independently atBath and Kitchen incl rounding the edges, like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed. |
| 83 | M&L for plain cement concrete (1:3:6), type C-1, (using 20mm graded crushed stone aggregates) as in bed block, blocks for holdfasts,filling in pressed steel door frames , benching slightly rounded or chamfered angles & throating etc including necessary use & waste of form work complete all as specified and directed. |
| 84 | M & L for Machine cut Pre polished Kota stone slab flooring 18-20mm thick over and including 15mm thick cement screed of cement mortar 1:3 base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete. (Note : Kota stone to be fixed in staircase thread shall be of single piece) |
| 85 | M &L Machine cut Pre polished Kota stone slab flooring 18-20mm thick over 10mm thick cement screed of cement mortar 1:3 base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing as in risers of steps, skirting, dado etc complete all as specified and directed. (Note : Kota stone to be fixed in staircase thread/Raiser shall be of single piece) |
| 86 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 87 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified |
| 88 | S&F PVC (SWR) pipes 110mm diasingle socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 89 | S&F PVC (SWR) pipes 75mm diasingle socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 90 | S&F PVC (SWR) bends 110mm dia any radius provided with access doorcomplete all as specified and directed. |
| 91 | S&F PVC (SWR) bends 110mm dia any radiuswith out access doorcomplete all as specified and directed. |
| 92 | S&F PVC (SWR) bends 75mm dia any radius provided with access doorall complete all as specified and directed. |
| 93 | S&F PVC (SWR) junction single, (single T)110mm dia any radius provided with access doorcomplete all as specified and directed. |
| 94 | S&F PVC (SWR) junction single (single T) 75mm dia any radius provided with access door complete all as specified and directed. |
| 95 | S&F 150x150mm Salt-glazed stoneware gully traps, square or round mouthed, type `P\" complete all as specified and directed. |
| 96 | Taking up or down steel water tubing and connections, including cleaning for refixing or removal from site, for bore of pipes 15mm dia complete all as specified and directed. |
| 97 | S&F 15mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified & directed. |
| 98 | Taking up or down steel water tubing and connections, including cleaning for re-fixing or removal from site, for bore of pipes 20mm dia complete all as specified and directed. |
| 99 | S&F 20mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified & directed. |
| 100 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cuttingnot exceeding 10cm girth complete all as specified and directed. |
| 101 | S&F in repairs vitreous china squating pan, \"Orissa\"pattern, size 580x440mm white, with integral foot rests, including 100mm cast iron \"P\" or \"S\" trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed. |
| 102 | S&F in repairs Wash basins, vitreous china, white, flat back of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets complete all as specified and directed. |
| 103 | S & F in repairs 10 litres capacity, PVC valve less, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed. |
| 104 | M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with stainless steel cockroach trap grating including jointing with solvent cement complete all as specified and directed. |
| 105 | M &L for PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450 mm longs suitable for 15 mm bore, ISI marked, fixed in repairs complete all as specified and directed. |
| 106 | S&F 40 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqm as in waste water pipes complete fixed in wall, ceiling or in floors complete all as specified and directed. |
| 107 | S&F in repairs 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed. |
| 108 | S&F15mm bore angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 109 | S&F15mm borestope valve cast copper alloy, fancy type, chromium plated,concealed type long shank and cupscrewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 110 | S &F in repairsPillar taps, Long neck cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. |
| 111 | S & F wall mixer with L Bend with provision for over head shower of Model casa Cat No 9275 of Make Prayag or equivalent complete all as specified and as directed |
| 112 | S &F in repairs Bib taps cast copper alloychromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete. |
| 113 | S & FBib taps cast copper alloychromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore suitable for fixing of washing machine complete all as specified and directed. |
| 114 | S & F 15mm bore Bib tap sink cock Regular spout with long neck and flage as per Model CasaCat Part No 9216 of Make prayag or equivalentin list of approved make complete all as specified and as directed |
| 115 | S & F 5mm PVC sheet Mirror Cabinet of size 400 x 500mmas per cat Part No 554 of Prayag or equivalent complete all as specified and as directed |
| 116 | S & F 100mm chromium plated overhead shower ABS with Brass Arm 225mm and flangecomplete all as specified and as directed |
| 117 | S&F PTMT shelf fixed with and including chromium plated brass screws and wooden/plastic cleats (Min weight 300gms) complete all as specified anddirected |
| 118 | S&FBrass chromium Plated towel rail 600mm long with brackets 20mm dia fixed to wall with chromium plated brass screws fixed in repair complete all as specified & as directed . |
| 119 | S&F Wall Mount Modern Kitchen Utensils Dish Rack Stainless Steel (31 x 10 x 30 Inches)Make : Palomino /jindal or equivalent as per approved Make |
| 120 | S&F in repair stainless steel peg set of 6 peg, 45 centimeter longcomplete all as specified and directed. |
| 121 | Dismantling water tanks exc 250ltr but not exceeding 500ltr capacity complete all as specified and as directed. |
| 122 | S&F rotational moulded polyethylene water storage tanks of 500 ltr capacity,(cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 123 | S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified & as directed. |
| 124 | S&F in repairs 20mm Gun metal,globe or gate valve, with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 125 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) exc 250 Ltr but n exc 500 Ltr complete all as specified and directed. |
| 126 | M & L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. |
| 127 | M&L for water proofing treatment to RCC roof comprising with APP (Atactic Polypropylene Polymer) base polymeric membrane 3 mm thick (minimum) weighing 3.5 Kg/Sqm reinforced with polyester non-woven fabric (weight not less than 160 gms/sqm) laid on surface applied with bituminous primer @ 0.40 litres per sqm, by torch application method with overlaps shall be minimum 150 mm on the transverse direction and 75 mm on longitudinal direction including cleaning the surfaces with brooms / cotton clothes over 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:3 with using and including water proofing compound as per manufacturer\"s instruction and carrying out water proofing test against leakage and seepage after taking down existing treatment complete all as as directed by Engineer-in-Charge |
| 128 | M&L Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edge including necessary form work complete. |
| 129 | M&L Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete. |
| 130 | M & L for Complete removal of existing treatment on wall/ roof projections incl facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust loose paint etc by skilled labour complete all as specified and as directed |
| 131 | M & L for waterproof cement based putty @ 1 Kg (undiluted) per sq mtr of average thickness 1mm over the plastered / old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanicsm) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per following steps : -Step 1 : Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5Kg putty per minute.Step 2 : Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a max pressure 3300 PSIStep 3 : Allow 6-8 hrs time to dry the putty surfaceNote : (a) The work pertaining to periodical services and water proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc is proposed to be used by the contractor and approved by GE.(b) Cost of Scafolding upto 10 mtr height of building is included in this item.(c) The contractor shall upload along with the documents under cover I , Memorandum of understanding (MoU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected.(d) Masking of waindow/doors during spray painting using polythine film will be included (e) Cleaning and clearing site of paint, mats etc included.(f) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years and same will be realised to contractor after satisfactory completion of 05 years. |
| 132 | M & L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface scomplete all as specified and directed.Note : (a) Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper mashking to carried before primer and paint application.(b) The work pertaining to periodical services and water proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc is proposed to be used by the contractor and approved by GE.(c) The contractor shall upload along with the documents under cover- I , Memorandum of understanding (MoU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected.(d) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years and same will be realised to contractor after satisfactory completion of 05 years. |
| 133 | M & L for one coat of acrylic water based exterior grade primer @ 0.9 ltr (undiluted/10 sqmtrs diluted with water 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.Note :(a) The work pertaining to periodical services and water proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc is proposed to be used by the contractor and approved by GE.(b) Cost of Scafolding upto 10 mtr height of building is included in this item.(c) The contractor shall upload along with the documents under cover- I , Memorandum of understanding (MoU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected.(d) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years and same will be realised to contractor after satisfactory completion of 05 years. |
| 134 | M & L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive and color stay Techonology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifieecations, Anti Algal properties in two coats @ 1.79 ltr (Undiluted)/10 Sqm with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow spreed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface in both coatsof paint complete all as specified and directed.Note :(a) The work pertaining to periodical services and water proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc is proposed to be used by the contractor and approved by GE.(b) Cost of Scafolding upto 10 mtr height of building is included in this item.(c) The contractor shall upload along with the documents under cover- I , Memorandum of understanding (MoU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected.(d) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years and same will be realised to contractor after satisfactory completion of 05 years. |
| 135 | M&L preparing new wood & wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed. |
| 136 | M&L for preparation of new or previously steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 137 | M&L for preparation of New plastered surfaces of wall and applying three coat of white wash complete all as specified & directed. |
| 138 | M&L for preparation of old plastered surfaces of wall and applying threecoat of white wash complete all as specified & directed. |
| 139 | M&L for preparation of New plastered surfaces of ceilingsand applying three coat of white wash complete all as specified & directed. |
| 140 | M&L for preparation of old plastered surfaces of ceilingsand applying one coat of white wash complete all as specified & directed. |
| 141 | M&L for preparation of old painted surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 142 | M&L Providing and injecting chemical emulsion for Post constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 ltrs per linear metre incl drilling and plugging holes and mnatch the existing floors using cement mortor 1:2 complete all as specified and directed. |
| 143 | M&L Providing and injecting chemical emulsion for Post constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole 300mm apart incl drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existisng floors complete all as specified and directed. |
| 144 | M & L for preparation of surface and removal of Loose concrete Removing and Hacking of existing concrete carefully by low impact high frequency hammer OR by manual chipping without damaging the existing concrete or control sand blasting incl cleaning the surfaces by air jet etc complete all as specified and directed. |
| 145 | M & L for Cleaning of Rebar For rusted metal (iron base) apply Reebaklens RR or Equivalent with brush for complete wetting of rusted metal surface and allowed to react it for 16-24 hours . After 24 Hours a white layer will appear which will protect further corrosion of metal/steel for about 5-7 days. Before applying protective coating the surface be wire brushed and thoroughly cleaned for dust with dry cloth complete all as specified and directed. |
| 146 | M & L for Anticorrosive treatment Providing and applying two coats of Nitozinc Primer or Eqivalent a two component epoxy zinc rich primer or equivalent product on the properly cleaned and prepared steel bar after the required chipping and cleaning of the concrete surface as per the manufacture specification complete all as specified and directed. |
| 147 | M & L for Re-Bar Providing and fixing shear connectors of 10mm dia by drilling 12mm dia holes on the concrete surface to a depth of 100mm using a rotary cum hammering drilling machine as per specification and throughly cleaning the hole using compressed air andd water jet and anchoring with pure resin based grout solution like forroc lokfix E77 or other equivalent approved make chemicals Providingand applying a priming cum bonding coat of two component Eposide resin conforms to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing Base and curing agent in 2:1 proportion by weight for joining old and new concrete as per technincal specification of manufacturer work shall be carried out as per the manufacturers specification complete all as specified and directed. |
| 148 | M & L Providing and laying micro concrete upto the required thickness as per the designated area to the prepared slurry tight shuttering with proper shear connector and bonding agent where ever necessary . The fluid micro concrete repair material shall be a single component, cement based Renderoc RG or equivalent micro concrete to which only the site addition of clean water (and approved graded coarse aggregate where specified) shall be premitted. The micro concrete in the flow able consistency should achieve a compressive strength of 50 N/mm2 after 28 days at 30C asper BS 4551-80 complete all as specified and directed. |
| 149 | S & F in repairs Providing precast cement concrete louvres and jallies, 50mm thick (mea sured solid), including all mould- ings but excluding frame of type B0 1:2:4 (12.5mm graded aggregate ) set in cement mortar 1:6complete all as specified and directed. |
| 150 | Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as directed. |
| 151 | M&L for Point wiring complete as specified with 1100 volt grade 1.5 sq.mm. (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including concealed type rigid non-metallic PVC conduitof suitable size but not less than 20mm dia , with all fittings, fixed on wall/ceiling /floor including modular box suitable for housing modular pattern switches/ sockets/ regulators etc. and duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified & directed for :-Note :- (i) Modular Plates, Covers and Modular Metal Boxes/PVC Boxes will measured and paid separately under relavant items.(ii) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate.(iii) The wiring shall be done strietly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. |
| 152 | One light /Fan /Ex Fan point controlled by one, one way switch |
| 153 | One Bell/Buzzer point controlled by one way bell switch |
| 154 | One light point controlled by two 2 - way switche (for stair case lights only) |
| 155 | One socket outlet 3 or 5 Pin, 6 Amp on same board. |
| 156 | One socket outlet 3 or 5 Pin, 6 Amp on independent board |
| 157 | All as per Ser item No 151 above but with 2.5 sqmm copper cable and concealed type rigid non-metallic PVC conduit complete all as specified and as directed for socket outlet 3 or 6 pin 15 Amps. |
| 158 | S&F modular switch 6 Amp one way 1 module 230 V AC complete all as specified and directed. |
| 159 | S&F modular bell push, 6 Amps, 1 module single pole complete all as specified and directed. |
| 160 | S&F modular switch 6 Amp two way 1 module 230 V AC complete all as specified and directed. |
| 161 | S&F modular switch 16 Amp one way 1 module230 V AC complete all as specified and directed. |
| 162 | S&F modular socket outlet 6Amp 2 module intel multi socket for all pins 230 V AC complete all as specified and directed. |
| 163 | S&F modular socket outlet 16 Amp 2 module and 6/16 Amp heavy duty 230 V AC complete all as specified and directed. |
| 164 | S&F modular ceiling fan regulator, electronic step type, 5 speed AC 230 volts, 2 module complete all as specified and directed. |
| 165 | S&F Modular TV Socket outlet, 1 module complete all as specified and directed. |
| 166 | S&F 1/2 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge. |
| 167 | S&F 2 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge. |
| 168 | S&F 3 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge. |
| 169 | S&F 4 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge. |
| 170 | S&F 6 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge. |
| 171 | S&F 8 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge. |
| 172 | S&F call bell multi music type AC 230 Volts single pole complete all as specified and directed. |
| 173 | S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI markedcomplete all as specified and as directed. |
| 174 | S&F PVC/polycarbonate angular/straight type Lamp Holder insulated body with back plate angle type suitable for battencomplete all as specified and directed by Engr-in-charge . |
| 175 | S&F LED Blub 9 watt Self Ballasted Retrofit type lamp with PBT body shell and DC Diffuser CCT 6500 Kwith fitting complete all as specified and directed. |
| 176 | S&F LED Tube lights fitting 1 x 18/20 Watt, 4 feet ,220V AC decorative box type with driver,including fitting fixed on wall/ceiling and connecting up complete with 3core flexible cable white of suitable size and making necessary connection complete all as specified and directed. |
| 177 | Fixing only serviceable LED Tube lights fitting 1 x 18/20 Watt, 4 feet ,220V AC obtained from reliaventitem no. |
| 178 | S&F LED Tube lights fitting 1 x 9/10 Watt, 2 feet , 220V AC decorative box type with driver, including fitting fixed on wall/ceiling and connecting up complete with 3 core flexible cable white of suitable size including taking down old unsv tube light fitting and making necessary connection complete all as specified and directed. |
| 179 | Fixing only serviceable LED Tube lights fitting 1 x 9/10 Watt, 2 feet ,220V AC obtained from reaaventitem no. |
| 180 | S&F LED Bulkhead luminaires 1 x 9/10 Watt fitting in engineering plastic housing with clear prismatic diffuser complete with all accessories and connecting up with 3 core flexible cable white ofsuitable size and making necessary connection complete all as specified and directed by Engr-in-Charge. |
| 181 | Fixing only serviceable LED Bulkhead luminaires 1 x 9/10 Watt fitting ,220V AC obtained from reliavent item no. |
| 182 | S&F LED building security light fitting 1 x 35 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protectionincl mounting bracket of suitable size and connection complete all as specified and directed. |
| 183 | Taking down carefully old unserviceable ceiling fans / Exhaust fans complete, removing its blade and deposit to the MES Store yard by the contactor. |
| 184 | Over hauling of ceiling fan of any sweep/ make i.e. opening of fan and cleaning ball bearing, filling grease/ oil and changing of u/s cotter pin, nut, screw, check nuts and bolts as required incl. cleaning of body, blades, down rods, canopies etc and re-assembling complete all as directed. |
| 185 | M&L painting of ceiling fan / exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc completeall as directed |
| 186 | Hanging only ceiling fan any make/ sweep and connecting up with existing electric circuit complete received from MES Store Yard all as specified and directed. |
| 187 | S&F ceiling fans 1200 mm sweep, AC 230 V complete with blades, down rods andconnected accessories, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with (BLDC) brushless direct current motor and connection complete all as specified and directed. |
| 188 | S&F Exhaust fans with louvers 300 mm sweep, 1400 RPM, Heavy duty single phase 240 Volts, AC 50 Hz, steel body and connecting up including louvers including making necessary opening on stone /brick masonry wall of suitable size, finishing it properly and making good with matching colour with the surroundings provision of cable 3 core of suitable size from ceiling rose to fan complete all as specified and as directed. |
| 189 | S&F Exhaust fans made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and connecting up including louvers including making necessary opening on stone /brick masonry wall of suitable size, finishing it properly and making good with matching colour with the surroundings provision of cable 3 core ofof suitable size from ceiling rose to fan complete all as specified and as directed. |
| 190 | S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one number single pole MCB 20 Amps , 240 Voltscomplete all as specified and as directed. |
| 191 | M&L for providing concealed submain wiring with two single core 6.00 Sqmm (nominal area) PVC Insulated FRLSH unsheathed multi stranded copper conductor cable 1100 volts grade drawing throughPVC Conduit complete as per direction including 6.00 Sqmm PVC insulated unsheathed multi stranded FRLSH single core copper conductor cable for earth wire including taking down/removing old one & cutting chases in walls by cutterand making good distrubed surfaces of walls, floors, etc complete all as specified and directed. Note :- (i) Three runs of single core 6.00 Sqmm multi stranded copper cableand one run of PVC conduit shall be measured as one run length (ii) Extra length of cable required for connection to DBs/MCBs shall deem to be included in unit rate quoted by contractor against the item (iii) Earth wire run inside the conduit. |
| 192 | M&L for providing concealed sub main wiring with two single core 4.00 Sqmm (nominal area) PVC Insulated FRLSH unsheathed multi stranded copper conductor cable 1100 volts grade drawing through PVC Conduit as per direction complete including 4.00 Sqmm PVC insulated unsheathed multi stranded FRLSH single core copper conductor cable for earth wire including taking down/removing old one & cutting chases in walls by cutterand making good distrubed surfaces of walls, floors, etc complete all as specified and directed. Note :- (i) Three runs of single core 4.00 Sqmm multi stranded copper cable and one run of PVC conduit shall be measured as one run length (ii) Extra length of cable required for connection to DBs/MCBs shall deem to be included in unit rate quoted by contractor against the item (iii) Earth wire run inside the conduit. |
| 193 | Supply & fixPrewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 12 way (2 + 10 way) single pole and neutral link, incl taking down old u/s any type, complete all as specified and as directed. |
| 194 | S&F RCBO for earth leakage, overload & short circuit protection double pole (DP)40 Amp 240 volts, 30mA with all incoming/outgoing connections with proper size lugs including taking down old unserviceable, complete all as specified and directed. |
| 195 | S&F MCB single pole (SP) 6 to 32 Amp 240 Volts 10 KA \"C\" series with all incoming/outgoing connection with proper size lugs including taking down old unserviceable complete all as specified and directed. |
| 196 | Supply, Installation, Testing & commissioning of Indoor type, wall mounted (with bolts and nuts) meter cabinet panelof size 1000 mm x 900 mm x 200 mm and made out of 2 mm thick CRCA MS sheet of suitable size to operate on 3 phase 4 wire system 415 VoltsAC, double door with first door having glass window for viewing KWH meter and other doors shall be opeque and suitable for mounting switch gear, electrical meters including pre wiring from Bus bar to Meter and Meter to MCBs(for pre wiring use 6.00 Sqmm single core copper cable and suitable size of lugs for connecting from Busbar to meter and meter to MCBs) including bottom gland plate with sufficient numbers of circular cable entry holes, complete as per drawing with masonary work for fixing in wall . All door sholud have neaprene rubber gasket and locking arrangements. The cabinet shall be painted both internally and externally with powder coated paint. The cabinet shall be dust and vermin proof with degree of protection IP 43. The cabinet shall be comprising with the following accessories: Incoming :-(i)MCCB 100 Amps FP, 415 Volt 25 KA adjustable thermal & fixed magnetic setting Ics100% = 01 No. (ii) Phase indicating lamp LED type– 1 Set of three. (iii) Aluminium bus bars for 3-phase & nuetral of current carying capacity up to 200Amps dully mounted on FRP/DMC insulators and necessary drillingfor connections and duly covered with heat shrinkable PVC sleeves of standard colour code. OutGoing:-(i) MCB SPN 40Amps, 10KA - 10Nos. (08Nos for meters, 02 for Spare). (ii) Fixing only Single phase electronic meters -08 Nos. (Note:-contractor removing electric meter from existing box for keeping in safe custody and fixing the same in this panel.) |
| 197 | Supply and spreading fine river sand in trenches for cushioning of under ground cable/filling cable ducts all as directedby Engr-in-Charge at site Note : - Only punned thickness shall be measured for payment purpose |
| 198 | Supply and lay burnt brick sub class ‘B’ of standard size laid in trenches as protection to cables all as directed. |
| 199 | Boring of holes under road, pavement, hard standing by trenchless technologytechnique for 40-80 mm dia pipe complete all as specified and directed. |
| 200 | M&L for light grade galvanized pipe ISI markedlaid in trenches, under road or fixing on wall/pole/ crossing nallah etc for cable protection of bore40 mm complete all as specified and as directed . |
| 201 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power UG cables (heavy duty) 1100 Volts grade with stranded aluminium conductor confirming to relevant IS specifcations of size 35 sq mm 3.5 core complete all as specified and directed. |
| 202 | Rigid non-metallic PVC conduit 20mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. |
| 203 | S&F Co-Axial Cable copper clad steel conductor, aluminium foil boned, PVC insulated, black colour complete all as specified and directed. |
| 204 | M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 4.0 mm dia galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed by the Engineer-in-charge. |
| 205 | Supply , installation, testing and commissioning of electric water heater (Geyser), storage vertical or horizontal type as approved , BEE 5 star rated, 25 litre capacity, 230 volts AC, 50 Hz comprising of high voltage heating element upto 2 KW for instatnt heating, ABS tech/ Engineering thermoplastic body or steel/ metal body with steel inner tank with corrosion resistance coating , rust and shock proofwith and including provision of Pressure relief valve and grouting bolts suitably flushed to wall or any other surfcae including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable / flexiable chord with plugcomplete all as specified and directed. |
| 206 | S&F Bib taps fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for GI pipe of size 15 mm complete all as specified and directed |
| 207 | S&F stop valve fancytype, chromium plated cast coper alloy screw down high pressure with crutches or butterfly handle screwed both ends for iron pipe or for union suitable for GI pipe of size 15 mm bore complete all as specified and directed |
| 208 | S&F Supply and fixing 15 mm bore, medium grade steel water tubing, galvanized, (ISI marked) with all fittings such as bends, elbows, tee, short pieces, diminishing pieces, cap and plugs laid in wall and ceiling or laid in floor complete all as specified and directed. |
| 209 | Supply and fixing PVC connection 15 mm, 450mm long with chromium plated adopter and washer at both endshot & coldcomplete all as specified and directed. |
| 210 | M & L for Cutting existing steel tubing for alteration or addition (each cut measured ) bore of pipe 40 mm / 50 mm /80mm complete all as specified and directed. |
| 211 | Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed. |
| 212 | S&F steel water tubing galvanised \" medium grade\"of size 25mm bore with all fittings and accessories complete in trenches/ on wall/under road complete all as specified and directed. |
| 213 | All as per serial item No. 212 here-in-before but of size 40mm bore. |
| 214 | Supply and fixing Gun Metal gate valve with iron wheel head, suitable for 25 mm bore pipes, screwed both ends for iron pipe or for union including taking out old one complete all as specified and directed. |
| 215 | All as per serial item No. 214 here-in-before but of size 40mm bore. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
