|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n. Exc 15 cm thickness (below or above ground level)complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (inclbacking), removing tilesand rubbish off the premises (out of Defence land)complete all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L 75 mm thickcement concrete type D-21:4:8 (40mm graded aggregate) as in sub base complete. |
| 4 | M&L for 18 -20 mm thick polished kota stone, machin cut kota stone slab flooringover 20mm cement screed bed in cement mortar (1:6), andjointed in neat cement slurry mixed with pigment to match the shade of slabcomplete all as specified and as directed by Engineer-in-Charge. |
| 5 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 15mm thick screed bed in cement mortar (1:6)complete all as specified and as directed by Engineer-in-Charge. |
| 6 | M&L for glazed ceramic coloured tiles (450x300x7mm) thick on vertical surfaces such as skirting wall, and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in cement mortar (1:4) rough to receive tilescomplete all as specified and as directed by Engineer-in-Charge. |
| 7 | M&L for vitrified ceramic light coloured tiles 10mm thick (square/rectangular) area of each tile n.exceeding 0.36 Sqm in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 20 mm thick screed bed in cement mortar (1:6)complete all as specified and as directed by Engineer-in-Charge. |
| 8 | S&F of vitrifiedceramic tile 8 to10 mm thick lightshade (square / rectangular) polished, area of each tile not exceeding 0.36 sqmover 10 mm thick plaster in cement mortar(1:4) as in vertical surface like skirting dadoetc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 9 | M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishingcomplete all as specified and as directed by Engineer-in-Charge. |
| 10 | Dismantling of brick work built in cement mortar including all quions arches , pillar etc but excluding ashalar facing dressed stoen and pre-cast concrete articles complete all as specified and as directed by Engineer-in-Charge. |
| 11 | M&L for brickwork with sub class \"B\" bricks, old sizestraight or curved on plan exc 6m mean radius, built in cement mortar (1:6)complete all as specified and as directed. |
| 12 | Taking down chowkhats or frames exc 1.5 sq.m but n exc 4 sq.m but with shutters (without taking off shutters from the frame) |
| 13 | Taking down chowkhats or frames n. exc 1.5 sq.m but with shutters (without taking off shutters from the frame) |
| 14 | S&F of 12mm thick glass door (tuffen glass), plain/frosted , fixed on floor spring with two nos stainless steel handle on each leaf n exc 45 cm long and 25 mm thick including necessary provision to godrej lock & 200mm aluminium tower bolt 2 nos each leaf the door, complete all as specified and as directed. |
| 15 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 16 | M&L in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 17 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 18 | M&L for preparation of two coat of synthetic enamel paint( finishng coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfacescomplete all as specified and as directed. |
| 19 | S&F of solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 20 | S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-Charge. |
| 21 | S&F in repair 1mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete, push pull or manual typecomplete all as specified and as directed by Engineer-in-Charge. |
| 22 | S&F of 100mm size SS butt hinges, medium weight (including fixing with nails or welded as required) complete all as specified and as directed. |
| 23 | S&F of 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and as directed. |
| 24 | S&F of 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 25 | S&F 200mm Aluminium anodised,barrel tower bolts of ex truded section and fixed complete all as specified and as directed. |
| 26 | M&L for preparation of two coat of synthetic enamel paint( finishng coat) over one coat of red oxide primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified and as directed. |
| 27 | Dismantling boarding/partition any thickness and description, including cover fillets. |
| 28 | S&F of powder coated aluminium frame (powder coated) for doors, windows, ventilators or Aluminium Partition with one or more rebates including joining cletas for fixing complete all as specified and as directed. (Note:- Colour coating shall be approved by Engineer-in-Charge) |
| 29 | S&F of alminium anodized powder coated door shutters, aluminium section weighing 0.55Kg/m, including joining cletas, glazing/glazing clips, rubbers neoprene packing, handles 2 No\"s each door, hinges, anodised aluminium snap beading, screws, mortice lock 01 Nos etc; complete all as specified and as directed. (Note:- Colour coating shall be approved by Engineer-in-Charge) |
| 30 | S&F of anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws aluminum poder coated tower bolt 02 Nos/each shutter etc; complete all as specified (Note:- Colour coating shallbe approved by Engineer-in-Charge) |
| 31 | M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, for aluminium door frame/ aluminium partition complete all as specified and directed. |
| 32 | S&F of powder coated aluminium three track sliding windows with three sliding shutters (one gauzed shutter including 0.36mm dia and 1.18mm aperture stainless steel wire mesh and two glazed shutter including 4 mm thick plane glass panes) made of aluminium sections not less than 1.1kg per meter for bottom and top tracks, side track 0.98 kg per metre, bottom shutter frame 0.55 kg per metre, top shutter frame 0.47 kg per metre, shutter sides 0.47 kg per metre and interlock sides 0.45 kg per metre including suitable nylon beading, channel, gasket, nylon rollers, Maruthi lock with handles etc; complete all as specified and directed. |
| 33 | S&F of anodised aluminium grill (anodised transparent or dyed to required shade according ti IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200mm centre to centre, including cutting grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per reuirement and direction of Engr-in-charge. (Note:- Colour coating shall be approved by Engineer-in-Charge) |
| 34 | S&F in repair aluminum extruded sction door closer hydraulically requalated designation No. 3 universal type, sutiable for door shutters of 851 to 1000 mm in width and of weight not more than 35 Kg and fixed. |
| 35 | Dismantling of cast iron /PVC pipes 75/100mm dia complete all as specified and directed. |
| 36 | S&F of PVC (SWR) pipe 110 mm dia single socketed with rubber ring joints laid in trenches or in floor including necessary excavation complete all as specified. |
| 37 | S&F of PVC (SWR) pipe 110 mm dia single socketed with rubber ring joints fixed to wall complete all as specified. |
| 38 | S&F ofPVC (SWR) pipe 110 mm dia bends complete all as specified. |
| 39 | S&F of PVC (SWR) pipe 75 mm dia single socketed with rubber ring joints laid in trenches or in floor complete all as specified. |
| 40 | S&F of PVC (SWR) pipe 75mm dia single socketed with rubber ring joints fixed to wall complete all as specified. |
| 41 | S&F of PVC (SWR) pipe 75 mm dia bends complete all as specified. |
| 42 | S&F of 16 mm bore 3 layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceiling or in floors etc; complete all as specified and directed. |
| 43 | S&F of 20 mm bore 3 layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceiling or in floors etc; complete all as specified and directed. |
| 44 | S&F in repair 32mm dia waste fittings, brass, chromium plated for basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed. |
| 45 | S&F in repair only 10ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high densitycomplete all as specified and directed. Note:- The rate for fixing flushing cistern are deemed to be included with the rate of fixing water closet any type. |
| 46 | S&F in repair vitreous china wash basin,whiteflat back, size 580x450mm excluding taps, but including 32mm dia waste pipe/waste coupling of PTMTincl bracket setc all as specified. |
| 47 | Dismantling water tank exc 500 & n.exc 1000 ltr and removing from site as directed. |
| 48 | S&F of rotational moulded polythene water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 1000 ltrs capacity any description,complete all as specified in SSR Part I. |
| 49 | Dismantling water tank exc 250 & n.exc 500 ltr and removing from site as directed. |
| 50 | S&F of rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs capacity any description,complete all as specified in SSR Part I. |
| 51 | S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia all as directed. |
| 52 | S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed. |
| 53 | S&F in repair ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed. |
| 54 | S&F in repair 15 mm bore bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule,complete all as specified and as directed. |
| 55 | S&F as in repair CP toilet paper holder with flat recessed type stainless steel fixed to wallscomplete all as specified and directed. |
| 56 | S&F in repair pillar tap, 15 mm dia copper chromium plated fancy type screwed down, high pressure, screwed both ends for iron pipe or for unions. |
| 57 | S&F in repair 15mm stop valve fancy type chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed |
| 58 | S&F ofsoap dish, any type, fixed to plug with chromium plated brass screws in the wall with glass shelf assembly complete all as specified and directed. |
| 59 | S&F as in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in positioncomplete all as spd and directed. |
| 60 | S&F as in repair for PVC connection 600mm long superior quality with PTMT nut on both side complete all as speciifed. |
| 61 | S&F in repair waste coupling CP suitable for 32 /40 mm bore pipe complete all as specified and as directed. |
| 62 | S&F in repair extruded aluminium alloy handles 150mm long fabricated type anodised for flush doors or skeleton doors or panelled doors complete all as specified & directed. |
| 63 | S & F in repair MS butt hinges medium weight 100mm long fixed to all types of doors complete all as specified & directed. |
| 64 | S & F in repair aluminium anodised, barrel tower bolts 150mm long of extruded section and fixed to doors complete all as specified & directed. |
| 65 | S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device (suitable for EWC) complete all as directed. |
| 66 | S&F in repairs 15 mm dia bib tap PTMT with long body any colour , screwed down high pressure screwed for iron pipe or for brass ferrule (Minimum weight 15mm - 120 gms) complete all as specified & directed. |
| 67 | S&F in repair 15mm dia wall mixer for hot and cold water chromium plated brass fancy type with self closing taps, cast copper alloy with all connection,screwed down for iron pipe and fixed complete all as specified. |
| 68 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long,complete all as specified and directed |
| 69 | Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for exc 250 & n.exc 500 ltrs capacity of tanks, complete all as specified and directed. |
| 70 | - ditto all as per item No. 69 above but exc 500 ltrs and n.exc 1000 ltrs. |
| 71 | - ditto all as per item No. 69 above but exc 1000 ltrs and n.exc 2000 ltrs. |
| 72 | M&L for easying door shutter of any description exc 1.00sqm but n.exc 2.00 sqm of any description incl taking down shutter and refixing in the same openingafter rectifying all defects in the shutter, oiling / servicing of floor spring, hydraulic door closer, tightening all loose screws, cleats, etc replacing all rubber gaskets/aluminium beadingcomplete all as specified and as directed. Note:- The minor parts such as screws, cleats, oil, rubber gasket, aluminium beading etc shall deemed to be including in quoted rate. |
| 73 | S&F in repair 15mm bore stop cock concealed long shank chromium plated fancy type screwed down high pressure with crutch or butterfly handle complete all as specified and directed. |
| 74 | S&F in repair 15mm chromium plated brass WHB mixer of long neck for mixing hot & cold water screwed down for iron pipe and and fixed complete all as specified and as directed. |
| 75 | S&F as in repair for 1 piece of mirror cabinet 50x31x11cm wash basin rack stroage cabinet plastic, glass wall shelf (number of shevlves-6) complete all as specified and as directed |
| 76 | S&F ofchromium platedgrating 100/125mm dia/hinged/circular of approved make and fixing with cement mortar (1:3) as in repair complete all as specified and directed. |
| 77 | S&F of syphonic action rod with float valve (complete kit) for low level cistern fixed in repair complete all as specified and directed. |
| 78 | S&F ofbottle trap (with internal partition) 32mm size with 250mm & 190mm long wall connection pipes & wall flange, Cat Part No. ALD-769L250x190 of Jaquar or equivalent), complete as per manufacturer\"s direction. |
| 79 | S&f of 4.80mm thick sheet glass/tinted/frosted ordinary quality in square exc 0.50 sqm in each pane complete all as directed. |
| 80 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including seat cover and chromium plated hinging device (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 81 | M&L for 75mm PVC (SWR) floor trap, plain with chromium plated grating including jointing with solvent cement complete in repair complete all as specified and directed. |
| 82 | M&L for repair towel ring of chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed. |
| 83 | S&F in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified |
| 84 | S&F in repair chromium plated Jet for EWC including PVC connection and accessories complete all as specified and as directed. |
| 85 | S&F as in repair sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed. |
| 86 | S&F in repair towel rail600mm long of chromium plated brass screw and wooden / plastic cleats . |
| 87 | S&F of 600x450 mmbevelled edge of selected quality glass with PVC moulded alround, mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified. |
| 88 | Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, including taking down roots of trees complete etc; complete all as specified and directed. |
| 89 | M&L for rendering 10mm thick on brick or concrete surfaces in cement mortar (1:6), finished even & smooth without using extra cement. |
| 90 | M&L for preparation of newly untreated plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paint complete all as specified and directed. |
| 91 | M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 92 | M&L for applyingtwo coats of weather proof exterior emulsion paint over priming coat of exterior primer on new or untreated plastered surfacesusing Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure complete all as specified and as directed. |
| 93 | M&L for applying two coats of weather proof exterior emulsion paint on old surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure complete all as specified and as directed. |
| 94 | M&L for rendering 5mm thick in cement mortar (1:3) on ceilling finish even and smooth with out using extra cement complete all as specified and as directed. |
| 95 | M&L for preparation of newly plastered surfaces on ceiling and applying three coats white wash complete all as specified and as directed. |
| 96 | M&L for applying one coat white wash on old decorated ceiling surface including preparation of old surfaces & filling cracks and holeswith white cement or cementmortar1:2 complete all as specified and as directed. |
| 97 | Dismantling wall/celling board/ aluminium partition any thickness, including cover fillets. |
| 98 | S&F of Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hanger 4mm dia (upto 1200mm lenth)made out of GI flat 40x3mm size of 60cm long with expansion hold fastener 12.5mm dia 40mm long complete all as specified and as directed. |
| 99 | M&L for HSPC non asbestos fibre cement building boards 4mm thick, preprimed, self embossed fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and as directed. |
| 100 | M&L for PVC hollow wall panelling 5mm thick multy grain finish prelaminated inclusive of fixing on to wall including moulding end caps fixed with PVC sleeves and screws as required at site coplete all as specified and directed. |
| 101 | S&F ofsolid PVC wall lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawingcomplete all as specified and as directed. |
| 102 | S&F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed. |
| 103 | S&F in repair venetian blinds of superior quality fabric [as approved by the AGE (I)], horizontal/vertical type, with 100mm wide louvers, including supplying and fixing of all arrangements required for proper functioning of the blinds such as aluminium top & bottom guide rails, rollers, chainetc; including taking down of old unserviceable venetian blinds, complete all as specified and as directed. |
| 104 | Dismantling plain or corrugated steel sheeting/AC/Fibre reinforced, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 105 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge. |
| 106 | S&F of framed work such as grills, grating, steel ladder, iron gate and doors framed and hung as gates including pintle hinges, stops, hand made sliding bolt, handles etc; complete all as specified and directed. |
| 107 | S&F of pre-painted gaivatume aluminium sheet zinc coatin GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 108 | S&F of 2 mm thick fibre glass reinforced translucent plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc; complete all as specified and directed. |
| 109 | S&F of pre-painted gaivatume aluminium sheet zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
