|
| 1 | SCHEDULE \"A\" PART - IB/RPORTION :- Demolition of floor/wall tiling including cement mortor bedding (but not backing) removing of unserveable tiles from site and rubbish of the premises complete all as specified and as directed. |
| 2 | Demolition ofplain cement cement concrete/terrazo tiles with cement mortor bedding in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 3 | M & L Plain Cement concrete type C-1 1:3:6using 20mm graded crushed stone aggregates 75mm thick as in plinth protection, hard standing, sub base, floor finish complete all as specified and as directed. |
| 4 | Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and as directed. |
| 5 | Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed and precast concrete articles complete all as specified and as directed. |
| 6 | M & L for Plain Cement concrete type B-1,1:2:4(20mm graded aggregate) 25mm thick complete all as specified and as directed. |
| 7 | M&L for 15 mmm thick screed bed or bedding layer in CM 1:4 as in base to floor finish complete all as specified and as directed. |
| 8 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free complete all as specified and as directed. |
| 9 | All as per item No.08 above here-in-before but as in vertical surface such as skirting etc. to match with the flooring -ditto- complete all as specified and as directed. |
| 10 | M&L for colourdnon skid ceramic tiles 300X300X7 to 8 mm thick (Square/ rectangular) area of each tiles exc 0.06 Sqm but n.exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed incoloured cement to match complete all as specified and as directed. |
| 11 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as in base for wall tiling in shirting/dado complete all as specified and as directed. |
| 12 | M&L for coloured Glazed ceramic tiles in vertical surface 350x 250mm x 7mm or 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 13 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and as directed. |
| 14 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and as directed. |
| 15 | M&L Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situationscomplete all as specified and as directed. |
| 16 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etccomplete all as specified and as directed. |
| 17 | M&L for 15 mm thick plastering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing including finishing the surfaces even and smooth without using extra cementcomplete all as specified and as directed. |
| 18 | M&L for 15 mm thick plastering on fair faces of brick work or concrete surfaces in two layer with 10 mm thick in CM 1:6 and top 5 mm thick in CM 1:4, mixing water proofing compound at 3% by weight of cement finished the surfaces even and smooth without using extra cementcomplete all as specified and as directed. Note : WPC will be measured and paid separately. |
| 19 | M&L for 10 mm thick plastering in CM 1:3 on fair faces of brick work or concrete surface as in ceiling including finishing the surface even and smooth without using extra cementcomplete all as specified and as directed. |
| 20 | M&L complete removal of existing treatment on wall and applying three coats of white wash complete all as specified and as directed. |
| 21 | M&L preparation of new plastered surfaces of wall and applying three coats of white wash to wallscomplete all as specified and as directed. |
| 22 | M&L complete removal of existing treatment on ceiling and applying three coats of white wash complete all as specified and as directed. |
| 23 | M&L preparation of new plastered surfaces of ceiling and applying three coats of white wash to walls complete all as specified and as directed. |
| 24 | M&L for preparation of old plastered surfaces of walls and applying one coat of cement based paint any colorcomplete all as specified and as directed. |
| 25 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint ant colorcomplete all as specified and as directed. |
| 26 | M&L for Flush/raised pointing in CM 1:4 to squared rubble masonry, coursed complete all as specified and as directed. |
| 27 | M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover slabs including necessary form work and set in CM (1:4) complete all as specified and as directed. |
| 28 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Mirror polishing and edge roundedcomplete all as specified and as directed for steps |
| 29 | M & L half brick work with sub class \"B\" bricks straight or curved on plan to any radiusin half brick thick wallsbuilt in CM (1:6)complete all as specified and as directed. |
| 30 | M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth on stone / concrete wall or slab wall complete all as specified and as directed. |
| 31 | Taking up or down steel tubing and connections including cleaning for refixing or removing to store 15 mm bore complete all as specified and as directed. |
| 32 | Taking up or down steel tubing and connections including cleaning for refixing or removing to store 20 mm bore complete all as specified and as directed. |
| 33 | Supplying & fixing 20 mm dia pipe to walls/chases/ceilings or laying in floors Polyethylene Aluminium Ployethylene (PE-AL-PE) composite pressure pipes including all Crimp type internal sealing Plansticmetal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work)complete all as specified and as directed. |
| 34 | Supplying & fixing 25 mm dia pipe to walls/chases/ceilings or laying in floors Polyethylene Aluminium Ployethylene (PE-AL-PE) composite pressure pipes including all Crimp type internal sealing Plansticmetal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work)complete all as specified and as directed. |
| 35 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mmcomplete all as specified and as directed. |
| 36 | S&F Gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and as directed. |
| 37 | Dismantling water tank of capacity exc 500& n.exc 1000 ltrs complete all as specified and as directed. |
| 38 | S&F 1000 ltrs capacity Rotational moulded polythene water strong tank (cylindrical vertical with closed top) hoisted and fixed in positioncomplete all as specified and as directed. |
| 39 | S&F in repairs Ball valves high pressure of PTMT with eppoxy coated Aluminium rod & high density plastic ball screwed for iron pipes and fixed 25 mm bore (Minimum weight 455 gms) complete all as specified and as directed. |
| 40 | Demolition and breaking up of AC drain pipes 100 mm dia set in CM complete all as specified and as directed. |
| 41 | Demolition and breaking up of AC drain pipes 75 mm dia set in CM complete all as specified and as directed. |
| 42 | S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cementcomplete all as specified and as directed. |
| 43 | S&F 150 X150 mm Salt-glazed stone ware gully traps, square, type \"P\"complete all as specified and as directed. |
| 44 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorscomplete all as specified and as directed. |
| 45 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorscomplete all as specified and as directed. |
| 46 | S&F 110 mm bore PVC (SWR) bends any radiuiscomplete all as specified and as directed. |
| 47 | S&F 110 mm bore PVC (SWR) bends with access door any radiuiscomplete all as specified and as directed. |
| 48 | S&F 75 mm bore PVC (SWR) bends any radiuiscomplete all as specified and as directed. |
| 49 | S&F 75 mm bore PVC (SWR) bends with access door any radiuscomplete all as specified and as directed. |
| 50 | S&F 110 mm bore PVC (SWR) junction single, (single T)complete all as specified and as directed. |
| 51 | S&F 110 mm bore PVC (SWR) junction single, (single T) with access doorcomplete all as specified and as directed. |
| 52 | S&F 75 mm bore PVC (SWR) junction single, (single T)with access doorcomplete all as specified and as directed. |
| 53 | S&F 75mm bore PVC (SWR) vent cowlcomplete all as specified and as directed. |
| 54 | S&F in repairs vitreous china wash down water closet pedestral pan white/coloured, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of loe or high density or PVC 32 mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed. |
| 55 | S&F in repairs vitreous china squatingpan orrissa pattern size 580 x 440 mm white with integral foot rest, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of loe or high density or PVC 32 mm dia, , closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed. |
| 56 | S&F in repairs vitreous china wash basins, white, flat back, size 550X400 mm including brackets, waste fittings, brass, chromium plated 32 mm with long screwed shanks and fly nuts, flanged end bedded in red lead cement and other end fixed, pillar tap, casr copper alloy, chromium plated fancy type screwed type high pressure, with long screwed shanks and fly-nuts, PVC waste pipe of 32 mm bore 75 cm long, complete all as specified and as directed |
| 57 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including PVC waste pipe of 38 mm bore and 75 cm long complete all as specified and as directed |
| 58 | S&F in repairs Pillar taps 15mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 59 | S&F Bib taps 15mm dia , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and as directed. |
| 60 | S&F in repairs Chromium plated two way bib cock with flanges. Mk Jaguar Cat No CON-CHR-041KN complete all as specified and as directed. |
| 61 | S&F in repairs 15mm angular Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 62 | Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms)complete all as specified and as directed. |
| 63 | S&F in repairsSoap dish,any type, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screwscomplete all as specified and as directed. |
| 64 | S&F aluminium Hat and coat hooks, solid body, 175mm to 250 mmcomplete all as specified and as directed. |
| 65 | S/F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and as directed. |
| 66 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete all as specified and as directed. |
| 67 | S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden /plastic cleats (Minimum weight 300gms) complete all as specified and as directed. |
| 68 | S & F stainless steel plate rack of size 900 x 1200mm rectangular, 1mm thick including provision of wooden gutties complete all as specified and as directed. Make :- Deep / Anjali |
| 69 | M&L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in terrace including water proofing compound finished even surfacecomplete all as specified and as directed.Note: Paid and Measured water proofing compound seperately. |
| 70 | M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 3% by weight of cement (but excluding the cost of cement), finishing the surface even and smooth without using extra cementcomplete all as specified and as directed. |
| 71 | M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, using water proofing compound at 3% by weight of cement but excluding the cost of WPC ( water proofing compound should be measured and paid seperately)complete all as specified and as directed. |
| 72 | M&L for cleaning the roof surface and applying oil bond bitumen primer @ 0.20 kg/sqm providing and laying 4mm thick APP modified water proofing membrane weight not less than 4 kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800/N/sqm cum tearing strength 180N with minimum of 10 cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2 kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified and as directed. |
| 73 | Supply only integral water proofing compound as per manufactures instruction complete all as specified and as directed. |
| 74 | M & L in repairsfor Tubular towel/curtain rod brass chromium plated 20mm dia complete all as specified and as directed |
| 75 | M & Labour for brass chromium plated brackets, Ends Cap and Holder suitable for 20mm dia Curtain Rodcomplete all as specified and as directed. |
| 76 | Taking down chowkats with shutter ( without taking off shutters from the frame) exc 1.5 Sqm but not exc. 4 Sqmeach complete all as specified and as directed. |
| 77 | Taking down Chowkhats or frames with shutter ( without taking off shutters from the frame) not exc. 1.5 sq. m each complete all as specified and as directed. |
| 78 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed. |
| 79 | S & F for Pressed steel frames (size 125x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixedcomplete all as specified and as directed. |
| 80 | M&L for PCC 1:3:6 type B1 (using 20 mm graded stone aggregate) as in cills, copings, apex stone, bed plates kerbs levelling course including waethering, slightly rounded or chamfered angles and throating as directed including mixing water proofing compound (but excluding the cost of WPC) as per manufacturers instrucionscomplete all as specified and as directed. |
| 81 | S&F 40 mm thick flush shhutter solid core construction with black board core and ply wood face panels commercial type on both sides complete all as specified and as directed. |
| 82 | S & F for 35mm thick 2nd class hard woodglazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8 , Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and as directed. |
| 83 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stain less steel wire staples complete all as specified and as directed. |
| 84 | M&L preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 85 | S&F WPC windows / ventilator shutterscomplete all as specified and as directed. |
| 86 | S&F 3mm thick sheet glass ordinary quality fixing in squre n.exc 0.5 sqm in each pane complete all as specified and as directed. |
| 87 | S&F 3mm thick sheet glass ordinary quality frosted fixing in squre n.exc 0.5 sqm in each pane complete all as specified and as directed. |
| 88 | S&F MS hold fasts cut to length bent to shape as required drilling holes and fixing with MS screws etccomplete all as specified and as directed. |
| 89 | S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165,complete all as specified and as directed. |
| 90 | M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primercomplete all as specified and as directed. |
| 91 | S & F in repairs Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed. |
| 92 | S & F in repairs Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottomrails .M.S frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width struckinside with solvent cement for stilesand plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructionscomplete all as specified and as directed. |
| 93 | S&F 100 mm long MS butt hinges, medium weight cold rolled. |
| 94 | S&F 75 mm long MS butt hinges, medium weight cold rolled. |
| 95 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section |
| 96 | S&F 125 mm long aluminium anodised barrel tower bolt of extruded section |
| 97 | S&F 150 mm longextruided aluminium alloy handles fabricated type anodised, |
| 98 | S&F 100 mm longextruided aluminium alloy handles fabricated type anodised. |
| 99 | S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type ) and fixing clips of cast or extruded section and fixing bolts and sliding blots of extruded sections or cast aluminium alloy. |
| 100 | S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hartd drawn steel spring, fixed in floor |
| 101 | S&F 300 mm ordinary rat tail rod pattern mild steel springs including roller and roller plate complete |
| 102 | Dismantling of wall boards (fibre, Pulp, insulation, plywood etc.) as in cup boards, shelve, pelmet boxes etc. |
| 103 | S&F in repairs 1st class hard wood plain fillets rectangular exc. 3 and n.exc 6 sqcm wrought fixed with screwscomplete all as specified and as directed. |
| 104 | M&L for cup board shutters particle boards both side laminated of any colour/patern interior grade and thickness 18/19 mm as specified and required including beadinds and hinges, trollers, handles, catchers and locking arrangement (Greenply or equivalent )complete all as specified and as directed. |
| 105 | M&L as in repairsfor cup board shutters particle boards both side pre laminated of any colour/patern interior grade and thickness18/19 mm as specified and required including beadinds and hinges, trollers, handles, catchers and locking arrangement (Greenply or equivalent )complete all as specified and as directed. |
| 106 | S & F Continuous (piano) hinges 30mm width of flap,mild steel, bright finish or electro galvanisedcomplete all as specified and as directed. |
| 107 | M&L antitermite treatment Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed. |
| 108 | M&L antitermite treatmentAt points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed. |
| 109 | SCHEDULE \"A\" PART - II E/M PORTION :- Taking down carefullycopper/ aluminium point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surfacecomplete all as specified and as directed. |
| 110 | Taking down unserviceable MCB DBs, Metal clad DBsalong with MCBs of any description and making good the disturbed surfaces of walls to match with existing sorrounding wall finishcomplete all as specified and as directed. |
| 111 | Taking down unserviceable electric energy meter of any description and depositing to AGE E/M Storecomplete all as specified and as directed. |
| 112 | Taking down unserviceable Security light of any description including service bracket, clamps nut bolts etccomplete all as specified and as directed. |
| 113 | Point wiring complete with two runs of 1.5 sq mm single core PVC insulated FRLS cable1100 volts grade with multi-stranded copper conductors, drawn throughand including non metallic med. grade rigid PVC conduit with all conduit accessories (including finishing to match with the sorroundings) and including provision of 1.5 sqmmPVC insulated FRLS copper cable as earth continuity conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheetfor fixing the switches / sockets/ regulators etc.complete all as specified and as directed. for :- |
| 114 | One light pointcontrolled by one one way switch . |
| 115 | One light pointcontrolled by one two way switch. |
| 116 | One ceiling fan point controlled by one one way switch. |
| 117 | One Exhaust fan point controlled by one one wayswitch. |
| 118 | One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 119 | One 3 pin socket outlet 5 Amps on the Independent board. |
| 120 | One bell/buzzer point controlled by one push button on the same board with other switches or independent. |
| 121 | All as per item No. 113 above here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductorcomplete all as specified and as directed. |
| 122 | S&F Electric bell/ buzzer 230 volts, single pole, 240 V. Make :Anchor/ Havells/ Legrand/ Crabtree complete all as specified and as directed. |
| 123 | S&F ceiling rose, 3 terminal, PVC/Polycarbonate isolated body complete all as specified and as directed.Make :Anchor/ Havells/ Legrand/ Crabtree |
| 124 | M&L for Lamp holderPVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.Make :Anchor/ Havells/ Legrand/ Crabtree |
| 125 | S&F LED Bulb Pin type of 9 Watt complete all as specified and as directed. |
| 126 | S&F Switch piano flush type 5/6 Amps single pole one way230 Volts. Make :Anchor/ Havells/ Legrand/ Crabtree. |
| 127 | M&L for switch bell push flush type complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 128 | M&L for flush type switch 6A, 2 way complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 129 | S&F Switch socket combination 2 in 1, 3 pin 5 Ampsflush type 230 Volts complete all as specified and as directed.Make :Anchor/ Havells/ Legrand/ Crabtree |
| 130 | S&F Switch socket combination 2 in 1, 3 pin 16A,flush type 230 Volts complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 131 | S&FStepped type electronic fan regulator flush type on laminated sheet for1200 mm sweep fanscomplete all as specified and as directed.Make :Anchor/ Havells/ Legrand/ Crabtree |
| 132 | S & F in repairs, wall mounted 10W LED 6Klight fitting, 2\"with extruded Al , heat sink, integral driver, energy efficient, ready to use pack etc, complete with all accessories internally pre wired and fixing the same on and including two Nos, PVC Block and Connecting up with twin core twisted flexible copper conductor cable of suitable size up to ceiling rose including taking downold one,complete all as specified and as directed.Make: Havells, Model LUMILINEBS10WLED865SPCWH or equivelent in Philips/CG. |
| 133 | S & F in repairs, wall mounted 22W LED 6K light fitting, 4\" ultra slim, with extruded Al , heat sink, integral driver, energy efficient, ready to use pack etc, complete with all accessories internally pre wired and fixing the same on and including two Nos, PVC Block and Connecting up with twin core twisted flexible copper conductor cable of suitable size up to ceiling rose including taking downold one,complete all as specified and as directed.Make: Havells, Model LUMILINEBS22WLED865SPCWH or equivelent in Philips/CG. |
| 134 | M&L for Taking down ceiling fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, including reassembling blades andhanging ceiling fan and connecting up including provision of cable from ceiling rose to connector of fancomplete all as specified and as directed. |
| 135 | Dismantle the unserviceable rubber bush with clamping set, supply and fixrubber bush with clamping set, GI bolt, nut and split pincomplete all as specified and as directed. |
| 136 | Sub main wiring complete with two runs of 6.0 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 6.0 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of non-metallic rigid PVC conduit and conduit accessories including fixing to wall of stone masonry, floors / ceiling etc.complete all as specified and as directed.NOTE: Two runs of 6.0 sqmm cable conductor, one run of 6.0 sqmm earth continuity conductor cable and one run of PVC conduit of suitable size shall be measured as one unit length. |
| 137 | All as per item No. 129 above but with 2x1.5 Sqmm + 1x1.5 Sqmmcomplete all as specified and as directed.NOTE: Two runs of 1.5 sqmm cable conductor, one run of 1.5 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length. |
| 138 | Providing suitable hole in stone masonary wall for fixing of Exhaust fan of 300 mm sweep and repair to the wall to give smooth finish as existing to the disturbed surface of wallcomplete all as specified and as directed. |
| 139 | Taking down old UNSV DB and Supply and fixing Vertical distribution board for incoming MCCB upto 250 A and MCBs for outgoing to be used, VTPN 8 Way, 415 Volts having earth bar & neutral link double door as in repairscomplete all as specified and as directed.Note. MCCB and MCB will be measured and paid seperately under relevant items. Make Havells, HPL, Indo Asian, Standard, Legrand |
| 140 | Taking down old UNSV DB and Supply and fixing Vertical distribution board for incoming MCCB upto 250 A and MCBs for outgoing to be used, VTPN 4 Way, 415 Volts having earth bar & neutral link double door as in repairscomplete all as specified and as directed.Note. MCCB and MCB will be measured and paid seperately under relevant items. Make Havells, HPL, Indo Asian, Standard, Legrand. |
| 141 | Supply and fix, in repair, flush to wall, MCB Distribution board, double door type, SPN 4 way, sheet steel powder painted, with bus bar, neutral link & earth bar etc. complete all as specified and as directed.Make: Standard / Legrand /L&T / ABB / Havells. |
| 142 | S&F MCCB 3 pole, 415V, fixed type, 63 Amps with breaking capacity 16 KAcomplete all as specified and as directed.Make : Havells/Legrand/Schneider. |
| 143 | Supply & fix, MCB SPN 20 Amps, 240 voltssuitable for fixing in MCB DB \"C\" seriescomplete all as specified and as directed.Make-Havells/Legrand/Schneider. |
| 144 | Supply & fix MCB SP 5 to 32 Amps, 240 volts,suitable for fixing in MCB DB \"C\" series complete all as specified and as directed.Make-Havells/Legrand/Schneider. |
| 145 | S&F security LED light fitting of 35 watt drawn through and including GI bracket made of med grade GI pipe of 1.4 mtr length, bend to shape including MS clamps made out of flat iron of size 32x4 mm -02 Nos. and necessary nuts, bolts, washer as requiredcomplete all as specified and as directed.Make-Havells/Philips/CG |
| 146 | S&F LED Bulknhead 10 watt Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs and IP66complete all as specified and as directed.Make : Model No HEXAFT10WLED857SSYMBOPC of Havells or equivelent Philips /CG |
| 147 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame Including louvers ,connecting wire and all accessories complete all as specified and as directed.Make-Havells or equivalent in Anchor/Usha. |
| 148 | Taking down UNSV LT cable of any size and Supplying and laying under floor /duct or on surface of wall with suitable clamps XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross -sectional area of cable 25 Sq mm 3.5 Core cablecomplete all as specified and as directed. |
| 149 | M & L for Road cutting / hard standing for taking up or laying of LT UG cable upto a depth of 15 cm, after laying of cable, well ramming to the excavated soil and repair the exvcavated portion of road as existing or by providing suitable mixture of PCCcomplete all as specified and as directed. |
| 150 | Takin down UNSV GI tubing and M&L for GI pipe light grade, 40 mm dia bore for cable protection with fitting fixed to poles / wall / floor / road crossing / in trenches etccomplete all as specified and as directed.Make-Jindal/Zenith/TATA |
| 151 | M&L for Earthing complete with galvanised cast iron steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the earth plate not less than 1.5mtr below normal ground level, connected to galvanised earth leadwire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel as earth electrod with top edge of earth plate not less than 1.5 mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI Light grade 15mm dia from earth plate to main switch board/panel,watring pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaining surplus excavated meterial all as required at site and specified in electrical plate No 3 of SSR part I 2009 complete all as specified and as directed.Note: On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction of Engineer-in-charge. |
| 152 | M&L earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to wall or any other indicated situation for loop earthing etc. as required 4.0 mm galvanised iron wirecomplete all as specified and as directed. |
| 153 | Supply, install, test and commissioning ofwall mounted LT meter panel board,indoor type custom designed, with separate compartments with hinged door for housing 8 nos single phase meters, including suitable arrangement for fixing on wall with suitable clamping arrangement, fabricated out of 2mm thick MS sheet, internally connected with suitable capacity of copper cable, including making good the disturbed floor, comprising the following accessoriescomplete all as specified and as directed. :- |
| 154 | Single Phase Digital energy meter, temper proof, CL 1.0 AC 240V, 50Hz with LCD display, 5-30A (Measures & Displays kWh,V,I,kW,PF, Last month history of kWh & MD in kW)complete all as specified and as directed.Make:HPLModel - SPPB1321120000ME03 (Gurgaon) - 08 Nos |
| 155 | Internal Power &control wiring with suitable PVC insulated copper wire. |
| 156 | Supply, install, test and commissioning of custom designed, with separate compartments for incoming MCCBs, meters, wall mounted LT cubicle panel board, indoor type, fixed in wall with suitable clamping arrangement, with aluminium bus bar of 200 Amps capacity (3 for Phase + 01 Neutral), 3phase, 4 wire, 50 C/S, fabricated out of 2mm thick MS sheet, internally connected with suitable capacity of copper cable, including making good the disturbed floor, comprising the following accessoriescomplete all as specified and as directed. :- |
| 157 | MCCB TPN 200A,36KA, - 01 No (Incoming) |
| 158 | MCCB TP 63A, 16 KA-04 Nos (Outgoing) |
| 159 | MCB SPN 20A-02 Nos |
| 160 | Indicator Lamps RYB LED-01 set |
| 161 | Digital VAF meter with selector switch-01 set |
| 162 | Internal Power &control wiring with suitable PVC insulated copper wire |
