Tender For Addition / Alteration And Upgradation Of Offrs/Jcos And Or Md Accn At Ambala Cantt Under Ge (South) Ambala Cantt (Reload), Ambala-Haryana

TDR : 45064234

Tender Notice
Corrigendum Details
BOQ

Expired

Ambala , Haryana

Tender Brief : Corrigendum : Tender For Addition / Alteration And Upgradation Of Offrs/Jcos And Or Md Accn At Ambala Cantt Under Ge (South) Ambala Cantt (Reload)

Document Fees
₹ 1000 /-

EMD
₹ 219330.0 /-

Tender Value
Refer document

Submission Date
24-09-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	17-09-2024	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	24-09-2024

Name of Work: ADDITION / ALTERATION AND UPGRADATION OF OFFRS/JCOs AND OR MD ACCN AT AMBALA CANTT UNDER GE (SOUTH) AMBALA CANTT (Reload)

Sl. No.	Item Description
1	SCHEDULE A PART I (B/R WORKS)Dismantling of brick or terracing tiles of single layers on roofs incl cleaning of bricks/tiles and removal of unusable bricks/tiles and removal from site including wire brushing and cleaning theroof surfaces with water including flashings and junction of parapets, complete all as specified and directed.
2	Wire brushing and cleaning theroof surfaces with water including flashings and junction of parapets complete all as specified and directed.
3	Demolition of mud in roof any thickness whether full thickness removed or part thereof includingleaping plaster and removal from site, complete all as specified and directed.
4	M&L for APP polymeric water proofing membrane minimum 3 mm thick and weighting not less than 3.0 Kg/Sqmblack finish reinforced with non-woven polyster matt wt not less than 150 gms/Sqm with thermo fusable finish laid over compatible bitumen primer at the rate of 0.40 Ltr Sqm torching over laps with a propane or abutan gas torch with a over lap of 75 mm at the side and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminious primer all as per manufacturers instructions incl preparation of surface complete all as specified and directed. The vital physical and chemical parameters of the membrane shell be under:- (i) Joint strength in longitudinal and transverse direction at 23°C at 650/ 450 N 15 cms (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150\"C when tested in accordance with ASTM (d-5147) (iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane only.Note: The contractor will carry out ponding test after application of APP treatment before claiming payment.
5	M & L for PCC (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement,complete all as specified and directed.
6	Material & Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded mechanical crushed aggregate) for benching, copingmixed with acrylic based polymer water proofing compound, complete all as specified & directed.(WPC shall be paid separately)
7	Material & Labour for precast PCC plain factory made tiles,ISI marked,22 mm thick of size 250 mm x 250 mm, fabricated using grey cement & no pigments over and including 15 mm thick cement mortar (1:3) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified and directed.
8	M & L for cutting holes n. exc 150 Sq. cm into or through brick walls built in cement mortar and making good in cement concrete 1:2:4 type B01 as required complete all as specified and directed.
9	Demolition of cement concrete (any type)for existing sunken portion of WC/Floortrap incl removing of all debris from site to a distance exc 250 m but not exc 500m and deposited where directed incl cleaning of surface with wire brushes and water complete all as specified and directed
10	M& L in repair for 40mm bore GI pipe medium grade as in spout complete all as specified and directed.
11	M& L for PCC 1:5:10 type E2 using 40mm graded aggrgate as in filling in sunken portion floor ,rounded or chamfered on edges complete all as specified and directed.
12	M & L for sunken floor water proofing treatment complete all as under - (a) scrapping the surface with wire brush and cleaning with water and allow to dry (b) Applying cement slurry @ 3.0 KILOGRAM/SQUARE METRE duly mixed with water proofing compound (C) 15 mm thick cement plaster 1:3 with additional floating/setting coat mixed with water proofing compound as per manufacture instruction ( the corner will made rounded in concave shape)(D) Applying cement slurry @ 3.0 KILOGRAM/SQUARE METRE duly mixed with water proofing compound (E) apply one coat of hot bitumin grade 85/25 conforming to IS 702 @ 1.2 KILOGRAM/SQUARE METRE . (f) supply and laying APP with non woven polyster reinforced sheet 3mm thick weight not less than 3.00 KILOGRAM/SQUARE METRE (G) applying one coat of hot blown bitumin grade 85/25 conforming to IS-702 @1.20 KILOGRAM/SQUARE METRE (H) curing the sunken portion with water min 48 hours by ponding. (Water proofing compound shall measured and paid separately)
13	Demolition of brickwork or stone/ boulder masonary, built in cement mortar including all quoins, arches, pillars etc, including stacking of servisable bricks and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.
14	Material and labour for brickwork, with old size sub class \"B\" bricks, straight or curved on plan to any radius, exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and as directed.
15	Material and labour for brickwork, with old sizebricks, straight or curved on plan to any radius,built in cement mortar 1:6 except bricks using old bricks retrieved from item No 13 including cleaning and washing complete all as specified and as directed.
16	Material & labour Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed .
17	Taking down cement plaster including raking out joints hacking for key, scrubbing down with water etc, and removal of debries to distance exc 250 mtr but n exc 500 mtr complete all as specified and as directed.
18	M&L for rendering 15 mm thickon fair faces of brick work or concrete surfaces, finished even and fair (without using extra cement) on walls in cement mortar (1:6), complete all as specified and as directed.
19	M&L for rendering 10 mm thickon fair faces of brick work or concrete surfaces, finished even and fair (without using extra cement) on walls in cement mortar (1:6), complete all as specified and as directed.
20	M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound complete all as specified.NOTE:WPC will be measured and paid for separately
21	M&L for rendering 5mm thick in (1:3) cm on fair faces of ceiling.finished even and smooth without using extra cement.complete all as specified and directed.
22	Material & labour for rough cast plastering over and incl 10 mm thick rendering in cement mortar 1:3 and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. Note: Rough cast plaster shall be applied asspecified in clause 14.22 of SSR Part-I 2009.
23	Supply only liquid water proofing comound ISI Marked complete all as specified and directed.
24	Material & labour 5 mm thick cement plaster in CM 1:3 as in soffits of slabs/Chajja/ Sunshade finishing the plastered surface even & smooth w/o using extra cement complete all as specified and directed .
25	M & L fordubbing out average 10 mm thick plaster on irregular surfaces of soffit of slab/chajjas/sunshades etc in CM 1:4 complete all as specified and directed .
26	M&L fo providing one layer of guiniting of thickness not exceding 50 mm provided steel reinforcement and chicken wire mesh if required by means of tinned tracks or welded to existing reinforcement in CM 1:3 for top & bottom of roof slabs, beams, columns and staircase ets as directed incl scaffholding at any height all as directed incl MSchicken wire mesh of weight exceeding 0.25 Kg/Sqm and n.exe 4 Kg/Sqm complete all as specified and directed .
27	M&L for preparation of exposed brick wall surface by cleaning the surface with wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks.Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day.Note : Further treatment over the surface so achievedwill be carried out only after approval of the same by GE.Note:- This item shall be executed by authorised applicator only. for carrying out efflorescence treatment to exposed and prepared wall surfacehere–in–abovein following sequence :–(a) Prime the prepared surface with one of the following product mixed with cement in 1:1ratio as bonding agent :–(i) Pidicrete URP of M/S Pidilite. (ii)Sika Latex of M/s Sika. (iii) Nitobond SBR Latex of M/s FOSROC(b) Immediately after priming the surface PMM (Polymer Modified Mortar) to be applied \"BY HAND\" while the primer is tacky.PMM should be prepared by mixing one of the following compounds in Cement Mortar 1:3 as per manufacturer\"s instructions :–(i) Pidicrete URP of M/S Pidilite. (ii)Sika Latex of M/s Sika. (iii) Nitobond SBR Latex of M/s FOSROC.
28	(c) PMM surface should be allowed to dry one day.After that it shoud painted with two coats of one of the following compound mixed with cement only in ratio of one part of selected compound and one point fire part of cement :–(i) Pidicrete URP of M/S Pidilite. (ii)Sika Latex of M/s Sika. (iii) Nitobond SBR Latex of M/s FOSROC(d)Now apply two coats of one of the following compound over the surface.These compounds are to be used as per manufacturer instructions :–(i) Pidifin 2K of M/S Pidilite. (ii)Brush Coat of M/s Sika. (iii) Brush Bond of M/s FOSROCNote : Both coats should be perpendicular to EACH other and gap between two coats shall be minimum 6 hours.(e) Sprinkle loose coarse sand after second coat while surface is tacky.Note: (i) Item will be executed by authorised applicator of the selected /approved company only. (ii) Every stage of work will be approved by GE then only next layer will be executed by contractor.
29	Material and labour for applying waterproof cement based putty @0.80Kg (undiluted) per Sqm of average thickness 2.50mm in two coats on prepared / newly plastered wall (external/ internal) and ceiling surfaces in following steps- (i) Filling cracks in wall using crack seal compound Asian smart care crack seal or equivalent(ii) Mix the putty @ 0.8 KILOGRAM/SQUARE METRE by adding 35 to 40% water by volume or as per approved manufacturer\"s instructions & mix it with electric putty mixer with mixing capacity of min 2.5 KILOGRAM putty per minute upto 5 to 10 minutes(iii) Apply the first coat of prepared mix with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with max pressure 3300 PSI with bottom to top configuration and allow 6-8 hrs to dry the putty surface.(iv) Apply the second coat of prepared mix with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with maximum pressure 3300 PSI with horizontal configuration(v) Allow 6-8 hrs to dry putty surface then prepare the surface by electronic wall sander machine to apply subsequent coats of primer complete all as specified and directed.
30	Material and labour for applying two coats of acrylic distemper on prepared & primed wall ( internal) and ceiling surfaces of approved tint complete all as specified and directed.
31	Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
32	Demolition ofof reinforced Cement Concrete of any description & in any position comp incl cutting of reinforcement complete all as specified and directed.
33	Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc fair finished flat surfaces complete all as specified and directed.
34	Form work to sides & soffits of plinth bands , lintel band, Shelves etc including, shelves etc.fair finished flat surfaces complete all as specified and directed.
35	Form work to chajjas and similar work for fair finished flat surfaces complete all as specified and directed.
36	M&L RCC 1:2:4 nominal mixtype B1 using 20 mm graded crushed stone aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
37	M & L for RCC 1:2:4 nominal mixtype B1 using 20 mm graded crushed stone aggregates Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
38	M&L for RCC 1:2:4 nominal mixtype B1 using 20 mm graded crushed stone aggregatesas in chajjas etc complete all as specified and directed.
39	Material and labour mild steel 10 mm dia and over TMT bar, FE 550D cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
40	Material and labour mild steel 6-8 mm dia TMT bar, FE 550D cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
41	Description all as per item No 39 above but 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders etc.complete all as specified and directed.
42	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
43	Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) includingremoval of debries to distance exc 250mtr complete all as specified and directed.complete all as specified and as directed.
44	M&L for 75 mm thick PCC 1:5:10 type E-2using40mm graded stone aggas in sub base of floor complete all as specified and directed.
45	M&L 25mm thick PCC Type B0 1:2:4 (12.5mm graded aggregate)as in floor finished rough to recieve floor finishes etc complete all as specified and directed.
46	M&L First quality, Non skid ceramic, coloured, rectified i.e. straight edge (locally known as joint free) tiles of size 600 x 600mm and of thickness not less than 7mm, in floors etc., set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in coloured cement to matchthe shade selected quality laid over and including 15mm thick screed bedding layer in CM (1:4) complete all as specified.
47	M&L First quality, Non skid ceramic, coloured, rectified i.e. straight edge (locally known as joint free) tilesof size 600 x 600mm and of thickness not less than 7mm, in skirting etc. over & including 10 mm thick cement mortar (1:4) screed, set and jointed with tile adhesive with notched trowel and pointed in grout of matching shade of tiles,complete all as specified and directed.
48	Material & Labournon skid coloured ceramic tiles 400 x 400 x 7 to 8 mm set & jointed with neat cement slurry @ 3.00 kg/Sqm& pointed in white/coloured cement to match the tiles over and including 15mm thick screed bed incement mortar 1:6 complete all as specified and directed.
49	Material and labour for premium quality, joint free, printed glazed coloured designer ceramic tiles of size 450 x 350 x 7mm thick on vertical surfaces of walls over and including 10mm thick rough finished plaster in cement mortar (1:4), and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.
50	M&L Vitrifiedceramic tiles light shade 8-10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in coloured cement to matchthe shade selected quality laid over and including 15mm thick screed bedding layer in CM (1:4) make and sample as approved by GE complete all as specified and directed.
51	M&L Vitrifiedceramic tiles 8-10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqmm in skirting/dado etc set and jointed in neat cement slurry and pointed in coloured cement to matchthe shade selected quality laid over and including 10mm thick screed bedding layer in CM (1:3) make and sample as approved by GE complete all as specified and directed.
52	M&L for machine cut Kota stone slab flooring 18-22 mm thick, for staircase step in single piece (of length not more than 1200 mm), laid over over & including 15 mm thick (average thickness) cement mortar (1:3) screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete, includingprovn oftwo Nos 3x3mm grooves at tread of each step complete all as specified and directed.
53	M&L for machine Cut Kota stone slab 18-22 mm thick on vertical surfaces like riser of steps, skirting, in single piece (of length not more than 1200 mm) over & including 10 mm thick (average thickness) cement mortar (1:3) screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Mirror finish), complete all as specified and directed.
54	M&L for machine cut Kota stone slab flooring 20-25 mm thick, laid over & including 20 mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and directed.
55	M&L for machine cut Kota stone slab flooring 20-25 mm thickskirting, dado and pillar, laid over & including 10 mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and directed.
56	M&L Granite jet black shade, 15-18 mm thick, machine cut, machine polished,bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick(average thickness) cement mortar(1:4) screed, as in cookingplatform,shelves,RCCcounters,windowcills&similarsituations,complete all as specified and directed.
57	M&L for Baroda Green marble, 15-18 mm thick,machine cut, lapd over & including 15 mm bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick(average thickness) cement mortar(1:4) screed, as in cookingplatform,shelves,RCCcounters,windowcills&similarsituations,complete all as specified and directed.
58	M&L for Baroda Green marble, 15-18 mm thick,machine cut, lapd over & including 15 mm bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick(average thickness) cement mortar(1:4) screed, as in thread of Stair casecomplete all as specified and directed.
59	M&L for Baroda Green marble, 15-18 mm thick,machine cut, lapd over & including 15 mm bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick(average thickness) cement mortar(1:4) screed, as in Riser/skirting of Stair casecomplete all as specified and directed.
60	Rounding to edgesof stone (of any description) slabs one edge, such as in steps, cooking platform, and other similar situations including rubbing and polishing (mirror finish), complete all as specified and directed.
61	M&L for PCC75 mm thick 1 :2 4 type B 2 using 40 mm graded stone aggregate as in flooring, finished cement concrete surface even andfair with outusing extra cement to be laid in alternate panels complete all as specified and directed.
62	M&L for 40 mm thick cement concrete type B-1 , 1:2:4 (20 mm graded crushed stone aggregate) as in PCC flooring finished the concrete surface even and smooth w/o using extra cement complete all as specified and directed.
63	M&L for 40 mm thick cement concrete type B-1 , 1:2:4 (20 mm graded crushed stone aggregate) as in PCC flooring incl spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.
64	M&L for glass dividing strips, 3mm thick and inserted in position to conform to design and width of strip 38mm complete all as specified and directed.
65	Taking down chowkats or frames with shutter, areanot exceeding 1.50 Square metre (without taking off shutters from the frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfacesin CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.
66	Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre andnot exceeding 4.00 Square metre (without taking off shutters from the frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.
67	Taking down shutters of any description n exc 1 Sqm each and removing from the site and making good the disturb surfaces as per existing complete all as specified and directed.
68	Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and removing from the site and making good the disturb surfaces as per existing complete all as specified and directed.
69	Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and removing from the site and making good the disturb surfaces as per existing and refixing in same opening after repair/easening complete all as specified and directed.
70	Dismantling structural steel work including doors, gates but excluding framed truss etc. Including use of welding machine and removal of material from site complete all as specified and directed.
71	M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ect.. Complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and fixingcomplete all as specified and directed.
72	Supply and fixing of pressed steel frames for doors of size 125x60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm MS FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 4 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0filling in frame and for holdfast, 2 Nos 12 mm dia tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed. Note:- Rates quoted are inclusive of hinges, holdfast, lugs, PCC for hold fast and chowkhat filling, tie bars and one coat of red oxide primer.
73	Supply and fixing of pressed steel frames for doors of size 105x60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm MS FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 4 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0filling in frame and for holdfast, 2 Nos 12 mm dia tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed. Note:- Rates quoted are inclusive of hinges, holdfast, lugs, PCC for hold fast and chowkhat filling, tie bars and one coat of red oxide primer.
74	M & L for 40mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on one face and decorative face veneer with lipping on one face complete all as specified and directed.
75	S&F 35 mm thick factory made glazed & Skelton shutter of IInd class hard wood open rebated & prepared to receive glass or gauze etc without sash bar open rebated with edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass or guage etc size of stiles rails etc as specified in sec 8 clause 8.24 (a) of SSR Part-I (2009) complete all as specified and directed.
76	S&F Factory solid PVC door frames of size 120mm x 60 mm made with one or more rebates including fixing lugs/holdfast, 125 mm size Stainless hinges(03 Nos), lock strike plate, etc., of colour as directed complete all as specified and directed.
77	S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with locking arragement inluding 20mm SS tower bolt (02 Nos),150mmgrip SS Handle (02Nos), in door at site of colour choice all as specification,wood colour, complete all as specified and directed.
78	Supply and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in EACH shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cutand fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware[Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)(Note: The unit rate quoted by contractor includes cost of 5mm thick dark glass,stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position,and includes all other connected accessories Net opening will be measured for payment purpose.)
79	Supply and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm) Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated),But Hinges of\"zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor includes cost of 5mm thick dark glass,stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position,and includes all other connected accessories Net opening will be measured for payment purpose.)
80	Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 SQUARE METRE.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.(Note: The unit rate quoted by contractor includes cost of 4mm thick pin headedglass, and includes all other connected accessories Net opening will be measured for payment purpose.)
81	Supply & fixing Brass, sliding door bolt 250 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.
82	S&F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.
83	Supply & fixing Extruded brass handles,fabricated type polishedtype handle 150 mm long complete all as specified and directed.
84	S&F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe 310-0 complete all as specified.
85	Supply & fixing Mild Steel Framed work such as Guard Bar/grill welded to window frame or fixed independantlys, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed.
86	Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.
87	Material and labour for preparation of new wooden surfaces, of any description not otherwise described, over 10 cm width or girth and applyingtwo coats of approved colour synthetic enamel paint, over a coat of pink primer complete all as specified and as directed.
88	Material & labour for painting to steel surfaces of any description not other wise described over 10cm width or girth with two coats of synthetic enamel paint over one coat of red oxide primer incl preparation of new surfaces complete all as specified and directed.
89	Material andlabour for preparation of veenred wooden surfaces of any description over 10cm width or girth and applying two coats of melamine polishing of approved brand to wooden surfaces including filling , sanding,spraying allas per manufacturo instructioncomplete all as specified and as directed.
90	S&F 300 mm MS ordinary rat tail rod pattern springs incl roller and roller plate fixed to wooden chwkhats or welded to angle iron door frames complete all as specified and as directed.
91	S&F small articles such as door stoppers etc of IInd class hard woood.Incl all necessary labour area not exc 200 cu cm each with 50mm long cold rolled mild steel butt hinge medium weight complete all as specified and as directed.
92	Preparation of old painted wooden surfaces of any description not otherwise describedover 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
93	Preparation of old steelsurfaces of any description over 10cm width or girth not other wise described applying two coats synthetic enamel paint complete all as specified and as directed.
94	S&F 100mm long hasp and staple sofety type Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
95	S & F stainlesssteel curtain rod 25mm dia having wall thickness 1.6mmfixed with and including stainless steeldecorative brackets, two lotto for each cut length at both endetcas in repair complete all as specified and as directed.
96	M&L for factory made mild steel door shutter with frame, fabricated from of 1 mm thickMS sheetincluding provision of steel handle & locking arrangement by providing 04 leaver lock with duplicate keys (of make Godrej, Link or Harrison) & handle etc, (all as per Godrej pattern & detail shown on Drawing No. FD-1032 sheet 1/1 dtd 25.9.93) including spray painting over a coat of red oxide primer and fixed the same on existing cupboard nitch with cement & sand mortar, complete all as specified and as directed.
97	S & F rubber strips 3 to 4mm thick & 65mm to 75mm wide fixed on bottom rail of door for covering gaps between door & floor to aviod entry of insects,dust etc complete all as specified and as directed.
98	S&F 150 mm overall length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
99	Dismantling woodenboarding any description, fixed in any position with nails as in shelves of cup board and pelmets of any description complete all as specified and as directed.
100	S&F for LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600 Kg/Cum) of both side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen /bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and as directed.
101	S&F for LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600 Kg/Cum) of single side rigid lamination of approved colour and other side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete all as specified and as directed.
102	S&F for 12mm thick LEAD FREE PVC Celuka ply (Minimum density 600 Kg/Cum) of fixed with stainless steel screws, solvent cement /adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and as directed.
103	S&F for stainless steel 304 grade wire basket cutlery of size 370 x 485mm premium quality fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.
104	S&F for stainless steel 304 grade wire basket (average weight 2.5 to 4 Kg per Basket) of pull out type like plain /cup & saucer /bottle /multi purpose /2–3 shelf basket etc for kitchens of required size fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.
105	S&F for Ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50KILOGRAMs complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ
106	S&F for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finishedcomplete all as specified and directed. Make: HETTICH, KAFF, GLEN, HARRISON and GODREJ.
107	S&F for Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.
108	Supply and fixing in repair of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.
109	All as per Item No 107above but 20mm bore.
110	Refixing old GI tuibing 15mm bore galvanised with all fittings as in walls,ceilings or floorscompleteincluding necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.
111	All as per Item No 109above but 20mm bore.
112	Dismantling old unserviceable cement concrete/PVC water tanks of capacity exc 250 ltrs & n.exc 500 Ltrs including supplying & fixing of PVC water storage tank 500 ltr capacity HDPE triple layered ,white colourcylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight20 mm - 210 gms ) fixed as in repairs.N ote :(i) Inlet, outlet & wash out pipe will be measured paid for separately.
113	Disconnecting existing tanks of capacity 250-1000 litre, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and hoisting if required reconnecting and re-fixing in position.(cleaning reparing etc measured separately).
114	Supply andfixing in repair, vitreous china wash down water closet pan (pedestal pattern) white, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. Including seat cover complete all as specified and directed.
115	S&F in repairsfor PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.
116	Supply and fixing in repairs, vitreous china squatting pan of Orissa pattern, size 580mmx440mm, white (Ist quality) with ‘P’ or ’S’ trap of PVC, with front or back inlet and integral foot rests of any pattern including provision of lime concrete bedding for fixing and making good to existing floor surface to match with the existing surface and connection to flush pipe, trap, anti syphonage pipe, etc including taking down and removal of existing unserviceable squatting pan of any description and size complete all as specified and directed.
117	Supply and fixing in repairs of 10 litre capacity, virgin polypropylene cistern, ISI marked, coloured, low level, valveless syohonic action type, 45cm PVC connection with PVC bend/flush pipe complete and making all connectionsincluding taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed.
118	Supply andfixing in repair, vitreous china wash hand basin, white colour, flat back, of size 550x440mm, ISI marked, with 2 Nos.CI brackets embedded in cement mortar 1:4, PVC waste pipe, 45cms long, fixed to walls, 15mm dia PVC connections and chromium plated waste coupling, etc.,including taking down/removal of existing unserviceable wash hand basin of any description and size and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.
119	Supply and fixing in repairs of 15mm bore pillar tap, chromium plated, cast copper alloy with capstan head, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks complete all as specified and directed.
120	S&F in repair Brass CP WHB Mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe all as specified. Make : Jaquar Cat Part No. CON-167KNBand equivalent of make as specified.
121	S&F in repair chromium plated hand shower (health fauset), telephonic type with 8mm dia, 1.5 meter longpvctube coverCP flexible with wall hooksuitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed.Make Jaquar Cat Part No. ALD-587and equivalent of make as specified.
122	S&f as in repair JET fighter spray with flexible arm complete for EWC complete all as specified and directed.
123	S&F in repair Chromium plated toilet paper holder complete all as specified and directed. . Make:-Jaquar Cat Part No. CAN-1151N and equivalent of make as specified.
124	S&F in replacement two way bib Tap chromium plated brass fancy type of 15 mm bore complete as all specified and directed .Make Jaquar Cat Part No. CON-041KNand equivalent of make as specified.
125	S&F chromium plated hand showerwith 1.5 mtr long flexible tube withwall mixer telephonic type completewith provision for overhead shower with 115 lond bad pipe on upper side, connecting legs & Wall flange all as specified and directed complete all as specified and as directed by engineer in charge . Make Jaquar Cat Part No. CON-273KNUPR and equivalent of make as specified.
126	S & F of stainless steel peg set of 06 Nos hook complete all as specified and directed
127	S&F for corner glass shelf with CP stand complete all as specified and directed.
128	S&F in repair Towel ring square with round flange of make JAQUARand equivalent of make as specified.
129	S&F in repair 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles scrwed down suitable for 15mm bore pipe or union in repair complete all as specified and directed. Make : Jaquar Cat Part No. CON-107KN and equivalent of make as specified.
130	S&F in repairBib tap, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, suitable for 15 mm bore pipe, complete all as specified and directed. Make:- Jaquar Cat Part No. CON-037KNand equivalent of make as specified.
131	Supply & fixed in repairs stainless steel grating openable 100mm size with/without hole including fixing with white cement complete all as specified and directed.
132	S&F in repair angle valve cock chromium plated fancy type 15 mm bore with flangecomplete all as specified and directed.. MakeJaquar Cat Part No. CON-053KNand equivalent of make as specified.
133	S&F in repairchromium plated Stop valves 20mm bore, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.
134	Supply & fixedin repair fancy type shower rose125mm dia sizeof Rim and 30cm long CP brass pipe with swiwel joint in complete all as specified and directed.
135	S&F in repair sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm longcomplete all as specified and directed.
136	Supply & fixing in repairCP Soap dish any type, fixed to plugs with chromium plated brass screws. Make Jaquar Cat Part No. CAN-1131Nand equivalent of make as specified.
137	S & F in repair chromium plated, towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed..
138	S&F in repairfor PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
139	S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x 330x160mm incl all fittings ie CP waste coupling, waste pipe complete all as specified and directed.
140	Supply and fixing in replacement 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
141	S&F in repairs PVC cabinet with looking mirror of size 350x450mm complete all as specified and directed.
142	S&F stainless steel 304 grade plate rack standard size 1000mmx750mm mm complete and fixing with rawl plug and steel screws of wt not less than 8 Kg each complete all as specified and directed.
143	Supply and fixing in replacement of 110mm dia uPVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, fixed to walls including dismantling of old pipe as existingand removal from site complete all as specified and directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.
144	All as per item No 142 above but 75mm bore.
145	S & F PVC (SWR) bends of 75mm radius complete all as specified and directed.
146	S &F PVC (SWR) bends of 110mmradius complete all as specified and directed.
147	S& F PVC (SWR) junction single, (Single T) equal or unequal of 110mm dia with access door complete all as specified and directed.
148	S & F PVC (SWR) vent cowl of 110mm dia complete all as specified and directed.
149	Supply & Fixing PVC\"P\" or \"S\" trap 100 mm bore complete all as specified and directed.
150	Supply and fixing in repairs ofPVCfloor trap, 75mm size, with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed.
151	M&L stack clamps of 50mm by 5 mm flat iron and 16 mm dia round iron stays, incl bolts & nuts and securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and directed.
152	M&L for salt-glazed stoneware gully traps,150x150 square or round mouthed, type \"P\" setting and jointing to drains with cement mortar 1:1 complete all as specified and directed.
153	Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for laying of cable complete all as specified and as directed.
154	Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.
155	Removing excavated spoil/materials to a distance not exceeding 500 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.
156	M&L for Concrete bed to drain pipes of 150mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 complete all as specified.
157	M&L for 150mm Salt-glazed stoneware drain pipes laid in trenches and jointed including taking down of old pipe complete all as specified and directed.
158	M&L for rendering 15mm thick in CM 1:4on fair faces of brick work or concrete surface of wall and finished surface even and smooth with neeru finish to plastering as all specified complete all as specified and directed.
159	M&L for providingPCC 1:2:4 type B-1 (20mmgraded stone aggregate )as in coping/ benchingetc including necessary form work complete all as specified and directed.
160	M&L for plain cement concrete 1:4:8 , type D-2 using 40 mm graded stone aggregate) as in fdn , filling and mass concrete complete all as specified and directed .
161	Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia pipe complete all as specified and directed .
162	M&L precast concrete cover slabs for drain man hole/drain etc.in (1:2:4) type B-1 using 20 mm mechanically crushed graded stone aggregate set in CM (1:6) complete all as specified and directed .
163	M & L for Brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6), complete all as specified and as directed by the Engineer-in-Charge
164	M&L for Rendering 15mm thickin CM 1:4 on fair faces of block masonry surfaces or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by EIC
165	M&L prepration of newly plastered surface and apply two coat of cement base paint complete all as specified & as directed.
166	M & L for Framed work as in doors or gates (ornamental type) of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W(Gde- E-250) quality-A complete all as specified & as directed.
167	M&L, 75 mm thick PCC (1:3:6) C-2 using 40mm graded stone agg in path/plinth protection finished even & smooth completed W/O using extra cement complete all as specified & as directed.
168	M&L PCC (1:3:6) C-1 using 20 mm graded stone agg as in surface channel or drain incl use of necessary from work for fair finishedsurface complete all as specified & as directed.
169	Extra for forming fair finishing of drain or channel 30 cm inner girth in cement concret using extra cement including forms, moulds mitrel gloppid ends etc complete all as specified & as directed.
170	M&L Roof Trusses (framed) , trussed , purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified & as directed.
171	M&L rolled mild steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes incl. rivetting, welding etc complete all as specified.
172	Supply and fixing inPre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directedby Engr-in-charge.
173	Surface dressing not ex 15 cm deep in soft/loose soil incl cutting of bushes / shrubs not exc 30 cm girth incl grubbing out roots complete all as specified.
174	Removing excavated soil exc 1.50km but n exc 5km and depositing where directed by Engr-in-Charge
175	M&L for 100mm thick cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified.
176	M&L for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with gray cement and no pigment to match over and including 50mm beddding layer of sand complete all as specified.
177	S & F Steel rolling shutters 1.25mm thick with ball bearing, gear operated type with bevel gear box and crank handle alongwith Safety lever locks mild steel with 4 levers for rolling shutters as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or manual type all as speicified and directed
178	Removing building materials etcto a distance of 5KMbeyond the lead included in the rates of other items including loading, unloading and stacking at the destination per load of appx 120 cft (Cubic foot) complete all as specified and directed.
179	SCHEDULE A PART II (SMART PERIODICAL WORKS)Material and labour for applying one coat of acrylic water based exterior grade / interior grade primer @ 0.90 litre (undiluted) / 10 Sqmdiluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 lit per minute having a pressure of 3300 PSI on prepared ceiling or internal / external walls surfaces. Allow 6 - 8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
180	Material and labour for applying two coats of anti fungal weather proof grade exterior acrylic emulsion paint of approved tint @1.80 lit / 10 Sqm (undiluted) as per approved manufacturer\"s instruction over prepared and primed surface of external wall. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed.Notes for item Nos 178 & 179 :–The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :–(a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer ofthe materials like Exterior Emulsion paint, putty etc after approval by the GE.(b) The Contractor shall upload with the documents under cover I \"Memoradum of Understanding\" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected.(c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures.(d) Removing of Nails, making good holes, cracks etc(e) Work in patches and in narrow /widths, bands, cornices, pilasters etc and cutting in edge of line where necessary.(f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes.(g) Washing floors, cleaning glass, joinery, electric fittings, wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer–in–Charge.(h) Sample patch of 10sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.
181	SCHEDULE A PART III (E/M WORKS)Material and Labour for Taking down Copper/Aluminium point wiring (light, fan, socket or power) complete, any type / size complete with removing all connection and accessories, fittings and fixturessuch asswitches , sockets, ceiling rose,pendent holder,fan regulator any type , all type of tube light fitting , batten , steel or PVC conduit , casing caping etc compele and making good the disturbed surface of wall , floor etc. complete all as specified and directed by Engineer-in-Charge.
182	Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLS-H, 1100 volts, ISI marked, PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 20mm dia and its fittings, including cutting chasing on wall/ceiling, including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes, ISI marked, including 1.5 sqmm single core PVC insulated and unsheathedFRLS-H cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dollywith and including MS flush boxes of 2 to 18 modules with inner and outer cover plates, confirming to IS 5139 of 1969 and IS 14772 of 2000 for fixing modular switch sockets for one light point (light point//fan point/bell point controlled by one one way switch complete all as specified and as directed.Notes :- (i) Switch, socket, ceiling rose, lamp holder, bell, bell push and fan regulators to be measured and paid for separately. The quoted rates are deemed to be included for providing cover plates and MS flush boxes as required at site.(ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only and surfaces shall be make good as per existing surfaces. (iv) The concealed conduits and MS boxes as fixed against new point wiring, shall be verified by JE/Engineer-in-Charge before making good the surfaces by plastering and other finishes.
183	One light point controlled by one switch/one fan point controlled by one switch and fan regulater.
184	socket outlet 3 pin, 5 Amp on independent board.
185	Socket outlet, 3 pin,5 Amp on the same board with other switches.
186	One light point controlled by two,2way switches.
187	One bell/buzzeer point controlled by one bell push button on the same board with other switches or independent
188	Description all as per serial item No.181.00 above, but with 2.5 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, for one socket point 15 Amps, 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.
189	Material and labour for Point wiring using approved colour coding as per IS with stranded copper conductor 4 Sqmm (nominal area ),single core ,FRLS PVC insulated and unshaethed stranded cable 1100 volts grade ISI-694 marked TECand FIA approved in and including heavy duty ,PVC concealed conduit ISI marked for one industrial type metal clad earth plug and socket out let with earth dolly including FRLSPVC Insulated unsheathed copper conductor 4 Sqmm nominal cross section area as earth continuity conductor upto common earth and connecting to common earth dolly complete and including cutting/chasing of wall complete all as specified and directed by Engg in Charge.
190	Supply and fixing ofModular Switch one way 6Ampsone module ISI Marked complete all as specified and directed by Engg in Charge.
191	Supply and fixing of Modular Switch one way 16Ampsone module ISI Marked complete all as specified and directed by Engg in Charge.
192	Supply and fixing of Modular Switch Two Way6 Ampsone module ISI Marked complete all as specified and directed by Engg in Charge.
193	Supply and fixing ofModular Bell Push6 Ampsone module ISI Marked complete all as specified and directed by Engg in Charge.
194	Supply and fixing of Modular Socket 6 Amps 5 Pin2 Module complete all as specified and directed by Engg in Charge.
195	Supply and fixing of Modular Socket 6/16Amps 6 Pin2 Module complete all as specified and directed by Engg in Charge.
196	Supply and fixing ofModular fan Regulator step type2 module complete all as specified and directed by Engg in Charge.
197	Supply and fixing ofModular Blanking Plate 1 module complete all as specified and directed by Engg in Charge.
198	Supply and fixing ofModularTV Socket RJ-11 complete all as specified anddirected by Engineer-in-Charge.
199	Supply and fixing ofModular Telephone Socket RJ-11 complete all as specified anddirected by Engineer-in-Charge.
200	Supply and fixing ofCeiling rose surface backlite 65 x 20mm size three terminal ISI marked complete all as specified and directed by Engineer-in-Charge
201	Supply and fix Electric buzzer AC,ding-dong type, 230 Volt, single pole complete all as specified and directed by Engineer-in-Charge
202	Material and labour for Taking down old and unsrevicablesheet metal enclosure , switch fuse unit , distribution bord any type /way / capacity including fuses,MCB\"s , insulator etc complete after removing all connection and making good the disturbed surface complete all as specified and directed by Engineer-in-Charge.
203	Supply and fixing ofSheet metal enclosures with two Pinandearth plug sockets controlled by one No.MCB SP rating 20 Amps , 415 Volts grade, complete all as specified and directed by Engineer-in-Charge.
204	Supply and fixing ofVertical sheet metal enclosures fordistribution boardTPN 4 way, 415 Volts, sheet metal powder coated, IP 54 protection with 200 Amps rated bus bar, double door type,grouted in wall in cement mortar, including MCCB, 415 volts, 4 pole, TPN thermal release based, fixed type rating 125 Amps, 25 KAas incomer complete all as specified and directed by Engineer-in-Charge.
205	Supply and fixing ofSheet metal enclosure MCB DB, SPN, 240 volts, 16 way, IP 43,with 200 Amps Rated bus bar double door type grouting in wall in CM, making good of disturbed surfaces and matching with existing and electrical connections complete all as specified and directed by Engineer-in-Charge.
206	Supply and fixing of Sheet metal enclosure MCB DB, SPN, 240 volts, 8 way, IP 43, with 200 Amps Rated bus bar double door type grouting in wall in CM, making good of disturbed surfaces and matching with existing and electrical connections complete all as specified and directed by Engineer-in-Charge.
207	Supply and fixing ofMCB SP, 220volt , 50 Hzs, 6 to 32 A, 10 KA , \"C\" series complete all as specified anddirected by Engineer-in-Charge.
208	Material and labour for Taking down ceiling fan /exhaust fan, sealing cable end, dismantling blades and removing fan, any size or any type complete all as specified anddirected by Engineer-in-Charge.Note : All Ceiling fan/Exhaust fan shall be deposited to concerned AGE E/M for repair if required.
209	Hanging only ceiling fan (M.D supply) in any model/size etc and making all connection using three core copper conductor flexible cable in size 1.5 Sqmm including drawn through PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified anddirected by Engineer-in-Charge.
210	Fixing only exhaust fanin any model/size etc and making all connection using three core copper conductor flexible cable in size 1.5 Sqmm including drawn through PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified anddirected by Engineer-in-Charge.
211	Painting to ceiling fan by spraying using synthetic enamel paint in two coats after cleaning all dust etc. , scraping of old paint , washing with washing powder water, refilling all type of cavities with filler and marking/ numberingas per existing complete all as specified anddirected by Engineer-in-Charge.Note : Colour for paint shall be approved by Engr-in-charge.
212	Painting to exhaust fan by spraying using synthetic enamel paintin two coats after cleaning all dust etc. , scraping of old paint , washing with washing powder water, refilling all type of cavities with filler and marking/numbering as per existing complete all as specified anddirected by Engineer-in-Charge.Note : Colour for paint shall be approved by Engr-in-charge.
213	Material and labour for Taking down old unserviceable meter anddepositedto concrned Maintance AGE E/M store and refixing the same after competion of complete work complete all as specified anddirected by Engineer-in-Charge.
214	Supply and fixing ofLEDbulb 9 watt, 230 volt AC, 50 Hz, Retrofit, B22 base for lamp holder and including lamp holder suitable for batton fitting insulated body with back plate complete all as specified anddirected by Engineer-in-Charge.
215	Supply and fixing ofaluminium housing tube light fitting ,1x18/20 W LED 230 V, lumen not less than 2000 energy efficentbatten fitting, with driver etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable copper conductor including 18/20 watt LED tube rod complete all as specified anddirected by Engineer-in-Charge.
216	Supply and fixing of10W Bulk head LED luminaries Die cast aluminium alloybody ,heat resistent prismatic glass cover ,with specially designed gasket incl all accessories & fixtures,internally prewired and connecting by provding copper flexible wire 23/.0076 mm twin core upto fitting, complete in all respects complete all as specified anddirected by Engineer-in-Charge.
217	Supply and fix Wall mounted decorative LED luminaire with metal base and glass including 7 Watt LED bulb warm white complete all as specified anddirected.
218	Supply and fix Surface mounted wall Mirror LED lightCompact & sturdy 10 watt LED decorative fixture aluminium housing with anti glare polycarbonate diffuser, multi purpose lighting solution & applications .all accessories & fixtures,internally prewired and connecting by provding copper flexible wire 23/.0076 mm twin core upto fitting, complete in all respects complete all as specified anddirected by Engineer-in-Charge.
219	Material and labour for Taking down old and unserviceable sub main wiring any size / type / core incl earth wire complete with batten/conduit etc and making good the disturbed surface to match the existing disturbed surface complete all as specified anddirected by Engineer-in-Charge.
220	Material and labour for Sub main wiring with two runs of 10 Sqmm for phase and neutral, 1100 volts grade single core FRLSH PVC insulated unsheathed multistranded copper conductor ,drawn through and including non-metalic PVC rigid conduitISI marked with all conduit accessories conceiled in surface of walls/floors / ceiling etc with 1x10 Sqmmsingle core FRLSH PVC insulated unsheathed with one copper conductor as earth wire complete and including cutting/chasing of wall complete all as specified and directed by Engineer-in-Charge. Note:-Three runs of 10 Sqmm cable and one run of conduit will bemeasured together as one running meter.
221	Material and labour for Sub-main wiring with 2 single core flame retardant PVC insulated and unsheathed cable with stranded copper conductor of 6 Sqmm drawing in & including heavy grade FRLSH PVC Concealed conduit ISI marked of suitable size ith all accessories onwallsand making good of disturbed surfaces including all conduit fittings, clamps, gutties etcand one additional 1 run of wire of 6 Sqmm but green in colour for earth DBs and boxes with proper thimbles complete and including cutting/chasing of wall complete all as specified anddirected by Engineer-in-Charge.Note:- 3 runs of 6 Sqmm submain wiring and PVC Conduit will bemeasured together as one running meter
222	Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cables (heavy duty) stranded aluminium conductor including cable glands, cable lugs etc , to suit the cable size, 1100 volt grade, ISI marked,laid in trenches or fixing along the poles or passing through the pipes or laid under floors or through walls/ducts etc. including taking down of old cable complete all as specified anddirected by Engineer-in-Charge of following cross sectional area :-NOTE: Excavation, earth work, sand cushioning, cable cover & pipe for cable protection will be measured and paid for separately.
223	Cross sectional area 35 sq. mm, 3.5 core
224	Cross sectional area 6 sq. mm, 2 core
225	Material and labour for Sand cushioning to cables with a layer sand 8 cm deep before laying the cable and 15 cm depth (punned down to 18 cm depth after laying and stretching of cable) including consolidation etc. complete all as specified anddirected.Note:- Punned quantity of sand shall be measured for the purpose of payment
226	Material and labour for Bricks common burnt clay building bricks, sub-class ‘B’ designation 75 Old size bricks laid dry and flat adjecent to each other for brick protection cover on cable complete all as specified anddirected.
227	M&L for Steel water tubing, galvanised, light grade, ISI marked,40 mm bore with and including all fittingslaid in trenches, on pole, under road, on wall, under floor etc. for protection of cable complete all as specified and directed by Engineer-in-Charge.
228	Material and labour for Taking down water heater any type/ size / capacity with all acessories after removing of all connections for servicing and repair complete and refixingwater heater any type and any size/capacity with and including all accessories such as nut bolt washers , PVC pipe etc with making all connectionusing three core copper conductor flexible cable drawn through in PVC flexible conduit pipe including painting with two coats of super enameled paint of existing shed complete all as specified and directed by Engineer-in-Charge. Note: All Geysers shall deposited to concerned maintanance AGE E/M store for repair and thereafter refixed on same or other position.
229	Supply and fix DecorativePost top lanternLED luminaire with diffuser and painted spun aluminium deflector fitting 40 watt warm white with clear acrylic cover complete all as specified and as directed by Engineer-in-Charge.
230	Supply and fix LED surface mounted, round panel with aluminium die cast housing 12 W incl all fixing accessories and connection complete all as specified and as directed by Engineer-in-Charge.
231	Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks of external dia size 20 mm , including cutting/chasing of wall complete all as specified anddirected by Engineer-in-Charge.
232	Supply and fix Junction box of size 150x150x150mm, made out of 2.0mm thick MS sheet, having front openable and locable hinged shutter with self closing arrangmenet, outdoor type weather and vermin proof completed duly painted with two coats of silver enameled paint over a coat of red oxide primer, comprising with insualted aluminium bus bar 04 Nos single phase 230 Volts of size 20x3 mm mounted on porcelain basedinsulators, having arrangement of connecting incoming and outgoing cables in and including MCB SP \"C\" curve 06 Amp, 240 Volts, 10 KA mounted on Din rail, thimbles etc.with suitable size of cable glands and MS clamps, nuts, bolts and washers complete all as specified and directed by Engineer-in-Charge.
233	Material and labour forEarthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore GI pipe (light grade)for protection of earthing lead, 20 mm bore (medium grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 in pit base and 50 mm thick RCC 1:2:4 type B-1, reinforced with XPM (weight not less than 3 KILOGRAM/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009) complete all as shown on drawings and as specified and directed by Engineer-in-Charge.Note : The unit rate includes for protecton pipe 15mm and GI earth wire 4mm from top of earth plate upto 7.50 metre above ground level.
234	Supply and fix MCB SP, 230volt , 50 Hzs, 40 to 63 A, 10 KA , \"C\" series complete all as specified anddirected by Engineer-in-Charge.
235	Supply and fixing of BLDC ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, 35 watt min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.
236	Supply and laying Steel water tubing, galvanised, medium grade, ISI marked, 50 mm bore with and including all fittings laid in trenches, on pole, under road, on wall, under floor etc. including taking down existing complete all as specified and directed by Engineer-in-Charge.
237	Supply and laying Steel water tubing, galvanised, medium grade, ISI marked, 25 mm bore with and including all fittings fixed to walls and ceilings or laid in trench, under floor etc. including taking down existing complete all as specified and directed by Engineer-in-Charge.
238	Supply and fixing Gun metal, globe or gate valves with iron wheel head screwed both ends, class II suitable for iron pipe and fixed for 50 mm boredia including taking down existing complete all as specified and directed by Engineer-in-Charge.
239	Supply and fixing Gun metal, globe or gate valves with iron wheel head screwed both ends, class II suitable for iron pipe and fixed for 25 mm boredia including taking down existing complete all as specified and directed by Engineer-in-Charge.
240	Supply and fixing 240 V, 10 KA \"B\" curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 to 63 Amp, in the MCB DB complete with connection testing and commissioning.
241	Note:-Amount of credit ofRs.295885.00 for retrieved materials is mentioned in Schedule of Credit Page No. 18 & 19 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Also Visit

Tenders

Haryana Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Addition / Alteration And Upgradation Of Offrs/Jcos And Or Md Accn At Ambala Cantt Under Ge (South) Ambala Cantt (Reload), Ambala-Haryana

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Addition / Alteration And Upgradation Of Offrs/Jcos And Or Md Accn At Ambala Cantt Under Ge (South) Ambala Cantt (Reload), Ambala-Haryana

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us