For The Work Under Deposit Scheme In Area Of Electricity Urban Distribution Division-Iv, Gorakhpur (Running Tender), Gorakhpur-Uttar Pradesh

For The Work Under Deposit Scheme In Area Of Electricity Urban Distribution Division-Iv, Gorakhpur (Running Tender) - 1 Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :- 2 11 KV CTPT Pole mounting unit 3 11 KV Electronic TVM Meter 4 11 KV PPMC 5 11/0.4 KV 250 KVA Transformer 6 11/0.4 KV 400 KVA Transformer 7 11 KV XLPE Cable 3X185 sq mm 8 11 KV XLPE Cable 3X120 sq mm 9 11 KV XLPE Cable 3X70 sq mm 10 I/D & O/D C/J Kits suitable for 3X70 sq mm XLPE Cable 11 Straight Through suitable for 3X70 sq mm XLPE cable 12 I/D & O/D C/J Kits suitable for 3X120 sq mm XLPE Cable 13 Straight Through suitable for 3X120 sq mm XLPE cable 14 I/D & O/D C/J Kits suitable for 3X185 sq mm XLPE Cable 15 Straight Through suitable for 3X185 sq mm XLPE cable 16 11/0.4 KV 25 KVA Transformer 17 11/0.4 KV 63 KVA Transformer 18 11/0.4 KV 100 KVA Transformer 19 S.T Pole 11 mtr. long 20 S.T Pole 9 mtr. long 21 PCC 8.5 mtr long 22 ACSR Dog conductor 23 ACSR Weasel conductor 24 LT AB Cable (3X120+1X95+1X16) Sq.mm. 25 LT AB Cable (3X150+1X120+1X16) Sq.mm. 26 11 KV Pin insulator with Pin 27 11 KV Disc insultor with fitting 28 11 KV Dropper angle (100X50X2028 mm) 29 11 KV S/S Base angle 30 11 KV Top Channel 31 11 KV V Type Cross arm 32 11 KV D.O. Fuse set 33 11 KV TPMO with Polymer insulator 34 LT XLPE Al. 3.5X70 sq mm 35 LT XLPE Al. 3.5X150 sq mm 36 LT XLPE Al. 1X240 sq mm 37 LT Cable 1X400 sq mm 38 Stay set complete with 5 Kg wire 39 Earthing Complete 40 T-Off channel (125X65X1300) mm 41 LT Distribution Box with Clamp 42 Supply offollowing material/fitting complete in all respect :- 43 LT Shackle insulator 44 LT Clamps 45 Insulated Dead end clamp with I hook 46 Suspension clamp with I hook (Insulated) 47 LT insulated Piercing connector 48 LT PVC cable 1X35 Sq.mm. for energizing D.B. 49 F Bracket 50 Holding clamp with Nuts & Bolts 51 Al Lugs 70/150/240/400 sq mm 52 Nuts & Bolts of different sizes 53 Copper Z Clamps 54 HDPE Pipe dia 160 mm 55 G.I Pipe dia 6 inch 56 G.I Pipe dia 4 inch 57 The excavation of 2 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor.Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor).Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification. 58 The excavation of 1 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of single Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/PCC clamp, Nuts & Bolts off size etc will be provided by the contractor.Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor).Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification. 59 Painting of Pole by double coating Aluminum & Red oxide paint. Paint will beprovided by contractor 60 Earthing of ST Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO Norms. 61 Fabrication, errection, commissioning & Testing of25/63/100/250/400 KVA T/F on Double Pole/Plinth with all accessories including make its LT and HT connection. All necessary materials such as Holding clamp, Al.Lugs (Confirming to IS 8309), Z Clamp, Nuts & Bolts will be supplied by the Contractor. 62 Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with nozelling and binding of stay wire (Complete work) 63 Erection ofFuse Set 64 Erection ofTPMO 65 Laying, stringing, sagging, binding and jumpering of ACSR Dog/Weasel conductor for LT/HT Line with fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts off size as per required. 66 Chemical earthing of Transformer (Body+Neutral) as per IS Code 3043 - 1987 specification (Materials will be provided by contractor) 67 Laying, stringing, sagging, binding and jumpering of ABC Cable (Size may vary) of LT Line with fixing of Distribution Box with Clamp, Insulated Dead end clamp with I hook, Suspension clamp with I hook(Insulated), LT insulated Piercing connector, XLPE 1X35 Sq.mm. Al. cable for enerzing DB,XLPE 1X16 Sq.mm. 68 Hoisting & Looping of 11 KV XLPE Cable Providing GI Pipe 3 M Long with complete Work 69 Erection of 11 KV XLPE Cable Jointing Kit/Straight Through with complete work 70 Installation of PPMC & 11 KV CT/PT Pole Mounting Unit 71 Earthing of PPMC & CT/PT unit 72 Laying of HDPE Pipe 6 inch Diameter for laying of 11 KV XLPE Cable by horizontal drilling method. The HDPE pipe shall be of PE 80 grade with pressure rating PN6 conforming to IS 4984/1995 and shall have wall thickness of 6.20 to 7.10 mm (HDPE pipe 6 inch dia with elbow and socket for 11 KV cable will be supplied by contractor) 73 Laying and dressing of under ground 11 KV XLPE Cable(Size may vary) by Horizontal drilling method as per RESPO norms. The Depth of horizontal drilling shall be between 2 to 3 meters or as per site required. 74 Laying and dressing of under ground 11 KV XLPEby Digging method using sand & Bricks as per RESSPO norms. 75 Laying and sagging of overhead 11 KV XLPE Cable as per site required. 76 Dressing, Tagging and Safe Laying of 11 KV XLPE cable under Concrete roadside trench with necessary material. (All Necessary Materialsprovided by Contractor) 77 Construction of T/F plinth of size 2x2x1.2 mtr with the help of first class brick & 9 masonary in the ratio 1:4 cement & sand coarse. Filling the structure completely andplastering outer surface as per RESPO norms. Top of the plinth covered with 4 RCC Slab of ratio 1:1.5:3 (Cement, sand & concrete) grouting with 2 Nos. ISMC size 125X65X6 MM (confirming to IS 808:1989) of 2000 mm long for resting. All required materials will be provided by the contractor. 78 Grill fencing of 11/0.4 KV S/S shall be made of rectangular of size & height approx 2 meter as per site requirement with fabrication 50X50X5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. The work is including painting of fencing as per norms. Work will be done as per RESPO specification. 79 Shifting of existing Transformer from its existing place to new site with complete work 80 Dismantling of following Line materials and safe loading, unloading and carraige of dismantled material from work site to departmental store 81 STP pole 11/9 meter long 82 11 kV Line 83 LT Three Phase Line

INR 3540 /-

Refer document