|
| 1 | Dismantling Plain corrugated Asbestos cement, any gauge, thickness, including, Nanital or similar pattern roof covering etc complete all as specified and directed. |
| 2 | Demolition of reed lathing single or double including battens and plaster or chicken wire lathing etc complete all as specified and directed. |
| 3 | Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position etc complete all as specified and directed. |
| 4 | Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified . |
| 5 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer boardE-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping complete all as specified. |
| 6 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specificationsetc complete all as specified and directed. |
| 7 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification etc complete all as specified and directed. |
| 8 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roofcovering /cladding to wall, fixed with self tapping screws etc complete all as specified and directed. |
| 9 | S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed. |
| 11 | S&F steel work in tubular trusses including special shaped washer,Piller etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 etc complete all as specified and directed. |
| 12 | M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A etc complete all as specified and directed. |
| 13 | S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps etc complete all as specified and directed. |
| 14 | M&L for second class hardwood as in scantlings clean sawn timberfixed etc complete all as specified and directed. |
| 15 | M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13and n.exc 25 sqcm etc complete all as specified and directed.. |
| 16 | M&L for rendering 15 mm thick in CM 1:4 on one side of lathing finished even and smooth without using extra cement etc complete all as specified and directed. |
| 17 | M&L for rendering 12 mm thick in CM 1:6 on other side of lathing finished even and smooth without using extra cement etc complete all as specified and directed. |
| 18 | S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple etc complete all as specified and directed. |
| 19 | Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each(Without taking off shutters from the frames) etc complete all as specified and directed. |
| 20 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) etc complete all as specified and directed. |
| 21 | Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed. |
| 22 | Pressed steel frames of size 125x60mm (1.25mm thick MS sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,including one shop coat of primer complete as specified, supplied and fixed etc complete all as specified and directed. |
| 23 | S&F factory made 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels complete all as specified and directed. |
| 24 | M/L 35mm thick 2nd class hard woodGlazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified. |
| 25 | S&F Powder Coating aluminium( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed |
| 26 | S&F for powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, handle , tower bolt anodised aluminium snap beading, screws etc complete all as specified and directed |
| 27 | M&L for sheet glass4mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane etc complete all as specified and directed. |
| 28 | S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples etc complete all as specified and directed. |
| 29 | S & F 100 size stainless steel butt hinges complete all as specified and directed |
| 30 | S & F 75 size stainless steel butt hinges complete all as specified and directed |
| 31 | Supply & Fixing150 mm Aluminium handles, cast type, anodised etc complete all as specified and directed. |
| 32 | Supply & Fixing100 mm Aluminium handles, cast type, anodised etc complete all as specified and directed. |
| 33 | S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed. |
| 34 | S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixedetc complete all as specified and directed. |
| 35 | S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed etc complete all as specified and directed. |
| 36 | S&F in repairs mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed. |
| 37 | Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 38 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement etc complete all as specified and directed. |
| 39 | M&L for rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed. |
| 40 | M&L for preparation of new plastered or un plasteredsurface of walls including cornices, pilasters etc and applying two coats of cement base paint incl primer complete all as specified and directed. |
| 41 | M& L for 2 mmthick Birla white putty/JK white wall care putty on walls etc complete all as specified and directed. |
| 42 | M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface complete all as specified and directed. |
| 43 | M&L for preparation of newsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified. |
| 44 | All as perSer item No 43.00 (here- in- before) but applying two coats of synthetic enamel paint over a coat of pink wood primer on new surfaces |
| 45 | M&L for preparation of oldsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying one coat of synthetic enamel paint in any tint complete all as specified & directed. |
| 46 | M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all as specified and directed |
| 47 | M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oilbound distemper on walls.all as specified and directed |
| 48 | M&L preparation of old surfaces of wallsapplying one coats of cement base paint complete all as specified and as directed. |
| 49 | Demolition, Cement concreteof any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge. |
| 50 | M&L for 75 mm thick PCC (1:3:6) type C-2 , (using 40 mm graded stone aggregate) in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed. |
| 51 | M&L for cement concrete type C2 (1:3:6) (40 mm graded stone agg) as in surface channels and drains etc complete all as specified and directed |
| 52 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds etc complete all as specified and directed |
| 53 | S&F 20mm diaHarrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.all as specified anddirected. |
| 54 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and directed |
| 55 | Material & labour for brick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4. etc complete all as specified and directed |
| 56 | M&L for brick work with sub class `B\" bricks straight or curved on plan exc 6m mean radius built in CM 1:6. etc complete all as specified and directed |
| 57 | Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed |
| 58 | M & L for PCC 25mm thick type B-0, 1:2:4 (using 12.5 mm graded stone aggregate)as in levelling corse of floor complete all as specified and directed. |
| 59 | M&L for Coloured /light shade vitrified ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles exc 0.8 sqm butnot exc 0.36 sqmin floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over incl 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 60 | M&L for Coloured /light shade vitrified ceramic tiles 10mm thick (square/regtangular) polished ,area of each tiles exc 0.18 but not exc 0.36 sqmmatching with floor as in skirting etc and laid over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and as directed. |
| 61 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening as per specification etc complete all as specified and directed |
| 62 | S&F factory made solid panel PVC door shutter 30mm thick (style).consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with eat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing in the frame at site as per specification etc complete all as specified and directed. |
| 63 | S&F vitreous china water closet Padestal pattern (white) including fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as directed. |
| 64 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tileslaid over and including 15mm thick CM (1:4) screed bed etc complete all as specified and directed. |
| 65 | M&L forcoloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over etc complete all as specified and directed. |
| 66 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing etc complete all as specified and directed. |
| 67 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing etc complete all as specified and directed. |
| 68 | Supplying and laying 16 mm outer diameter CPVC pipe SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as direcetd. |
| 69 | Supplying and laying 20 mm outer diameter CPVC pipe SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as direcetd. |
| 70 | S&F 15mm bore dia bib taps long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed. |
| 71 | S&F Brass chromium plated shower rose 125 mm size.with Shower arm complete all as specified and as direcetd etc complete all as specified and directed. |
| 72 | S&F 15mm dia bore fancy type swan neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed dwon high pressure, with or wothout lettered `Hot\" or `Cold\" with long screwed shanks and fly nuts, screwed for iron pipe etc complete all as specified and directed. |
| 73 | S&F CP angle cock 15mm cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed. |
| 74 | S&F vitreous china wash hand basin includingbrackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and directed |
| 75 | S&F vitreous china half stall urinalwhite, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia etc complete all as specified and directed. |
| 76 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) etc complete all as specified and directed |
| 77 | S&F 32 mm waste coupling of PTMT (half or full threaded) etc complete all as specified and directed |
| 78 | S&F Grating doom 100mm dia of PTMT (min wt -25gms) etc complete all as specified and directed |
| 79 | S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed |
| 80 | S&F towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (min wt - 170 gms) etc complete all as specified and directed |
| 81 | S&F corner glass shelf assembly 300 mm radius made of 6 mm thickglass, with CP railing, fixed with suitable rowal plug & screws complete all as specified and directed. |
| 82 | S & F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated brackets guard and railing 60 cm long etc complete all as specified and directed |
| 83 | S&F soap dish chromium plated steel/stainless steel, approx size 160x160mm x 1mm thick , fixed to walls with plugs & CP brass screws complete all as specified and directed. |
| 84 | S&F CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 85 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 86 | S&F looking mirror ofsize 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completeall as specified and as directed. Make : Saint Gobain/Modi float /Atul / Kohinoor. |
| 87 | S&F (SWR) bends of 110 mm dia complete all as specified and as directed. |
| 88 | S&F PVC (SWR) bends of 75 mm dia complete all as specified and as directed. |
| 89 | S&F PVC (SWR) branch piece, single (single Y) equal or unequal of 110 mm dia complete all as specified and as directed. |
| 90 | S&F PVC (SWR) branch piece, single (single Y) equal or unequal of75 mm dia complete all as specified and as directed. |
| 91 | S & F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, in floors, fixed to walls including making good the disturbed surfaces complete all as specified |
| 92 | S & F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, in floors, fixed to walls including making good the disturbed surfaces etc complete all as specified and directed |
| 93 | M&L for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as per specified and directed. |
| 94 | S&F rotational moulded polyethylene 1000Ltrs Capacity water storage tanks double layer(cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified anddirected. . |
| 95 | S&F 4.00 mm dia GI wirefor mosquito and hook fixed in wall complete all as specified |
| 96 | M&L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron all as specified anddirected. . |
| 97 | M&Lfor ATT treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling andplugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floorsall as specified anddirected. . |
| 98 | M & L for block boards, 18/19 mm thick, , grade 2 quality, e x t e r i o r grade, , commercial type fixed with screws to timber frame work , for cup board including lipping / beading as required complete all as specified and directed. |
| 99 | M&L for surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil etc complete all as specified and directed. |
| 100 | M&L for excavation in trenches n.exc 1.5m wide and n.exc 1.5m in deepth; for foundation etc or for shafts, wells, cesspits, manhole laying of pipe line, cable, pier holes, etc n.exc 10 Sqm on plan andn.exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified and directed. |
| 101 | M&L for excavation in trenches for each additional 1.5m or part thereof in depth beyond the first 1.5 m depth exc 1.5 m but not exc 3 m. |
| 102 | M&L for PCC 1:4:8 type D-2 (using 40mm graded agg) as in foundation, filling and mass concrete etc complete all as specified and directed. |
| 103 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. |
| 104 | All as per Ser item No 103.00 (here- in- before) but 5mm dia and over and including 10mm dia in stirrups spacers and binders etc complete all as specified and directed |
| 105 | M&L for RCC(1:1.5:3), Type A-1 (using 20mm graded stone agg) Nominal mix as in foundations, including rafts, footings, foundation beams; plinth beams; base for columns, etc.; basement slabs, unde-reamed piles and mass concrete etc complete all as specified and directed. |
| 106 | M&L for RCC(1:1.5:3), Type A-1 (using 20mm graded stone agg) Nominal mix as in coloums, pillars, piers, posts and struts etc complete all as specified and directed. |
| 107 | M&L for RCC (Nominal Mix) typeA-1 (1:1.5:3), (20 mm graded stone aggregate) as in beams, cantilvers, bressummers, lintels over 1.5m span etc complete all as specified and directed. |
| 108 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed. |
| 109 | Use and waste of formwork to sides of pillars posts, struts, piers, columns and stanchions finished the suface rough etc complete all as specified and directed. |
| 110 | Use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc complete all as specified and directed. |
| 111 | Supply only water proofing compound etc complete all as specified and directed. |
| 112 | S&Ffor providing sliding type (3 Track +3 shutter) aluminium windows and ventiletor, section profiles of aluminium as per sketch No SK/2019/01 dated 21/01/19,aluminium alloy extruded sections conforming to HE 9-WP of BIS 733 and HP 9 -WP of BIS 1285 as amended, with minimum thickness of frames (outer bottom, Top & side ) 1.5mm and sliding sash (stiles & rails) of minimum thickness 1.2 mm. The windows shall be procured from a BIS license factory manufactoring windows to BIS-1948, The EPDM gaskets, rollers, recessed handles cum locks aluminium snap beading for receving glass/wiremesh with stainlss steel screws shall b provided with windows. The aluminium extruded section shall be of make Jindal/Hindalco/Alom extrusions etc all as listed etc complete all as specified and directed.Note:- Glazing and Stainless steel wire mesh will be paid seperately. |
| 113 | S&F 4 mm thick frosted glass fixed to aluminium frame work n.exc 0.5 Sq.m in each pane etc complete all as specified and directed. |
| 114 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and directed. |
| 115 | M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface etc complete all as specified and directed. |
| 116 | M&L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) as damp proof course to horizontal or vertical surfaces including necessary form works, applying evenly a coat of blown type bitumen at 1.50 kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm including 150 micron thick polythene film laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm etc complete all as specified and directed. |
| 117 | M&L for PCC (1:4:8) type D-2, 75mm thick using 40mm graded stone agg as in sub base of floor etc complete all as specified and directed. |
| 118 | M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match the shade of tiles laid over andincluding screed bed 15mm thick in CM 1:6all as directed . |
| 119 | M & L for rendering 15mm thick on cement mortar 1:4 mixed with water proofing compound @ 3% of qty of cement finishedof brick or concrete work finished the surface even and smooth without using extra cement.. WPC will be measured and paid separately etc complete all as specified and directed. |
| 120 | M&L for preparation of new plastered surfaces and applying two coats of white wash on wallsall as specified & directed. |
| 121 | S&F Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of chromium plated etc complete all as specified and directed. |
| 122 | S&F inPVC low level flushing cistern of 10 ltrs capacity incl flush pipe etc complete all as specified and directed. |
| 123 | S&F Grating doom 100mm dia of PTMT (min wt -25gms) etc complete all as specified and directed. |
| 124 | S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed. |
| 125 | Supply & fix PVC (SWR) pipes single socketed in any length with rubber ring joints,but bore of pipe 150 mm dia laid in trenches or floors etc complete all as specified and directed. |
| 126 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & including 20 mm thick screed bed (bedding layer) in CM 1:4, all as specified & directed by Engineer-in-charge. |
| 127 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed. |
| 128 | Returning, filling in, including spreading, leveling, watering & well ramming in layer s not exc 25 cm etc complete all as specified and directed. |
| 129 | Removing excavation material n exc. 50m & deposited where directed at a level n exc. 1.5m above the starting point etc complete all as specified and directed. |
| 130 | S&F Plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W (Gde-E-250 quality-A) etc complete all as specified and directed. |
| 131 | S & F 5-10mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n exc 15cm long complete all as specified and as directed by the Engineer-in-Charge |
| 132 | Taking down carefullycopper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed. |
| 133 | M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep complete all as specified and as directed.Make:- Finolex/Havells/RR KabelMake of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme |
| 134 | Onelight pointcontrolled by one, one way switch . |
| 135 | One Exh/Ceiling fan point controlled by one, one wayswitch. |
| 136 | One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 137 | One 3 pin socket outlet 5 Amps on the Independent board. |
| 138 | All as per Ser item No 133.00 (here-in-before) but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 139 | M&L for Switch piano flush type single pole, one way 5A etc complete all as specified and directed. Make:- Havells/Legrand/Anchor |
| 140 | M&L for Socket outlet, 2 in 1, 3 pin 5A flush type etc complete all as specified and directed.Make:- Havells/Legrand/Anchor |
| 141 | M&L for Switch Socket combination, 2 in 1, 5 pin 5A flush type etc complete all as specified and directed.ke:- Havells/Legrand/Anchor |
| 142 | M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type etc complete all as specified and directed.Make:- Havells/Legrand/Anchor |
| 143 | M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and directed.Make:- Havells/Legrand/Achor |
| 144 | M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. Make:- Havells/Legrand/Achor |
| 145 | Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length etc complete all as specified and directed.Make:- Finolex/Havells/RR KabelMake of caping/casing :- Prestoplast/Finolex/supreme |
| 146 | Taking down S&F for , LED Light fitting 1 x 20 watt (4 Ft), Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with, including two Nos PVC blocks and connecting upwith flexible copper cable of size 0.75 Sq mm 3 core and flexible pipe from ceiling rose to the light fitting incl taking down old unsv light fitting complete all as specified and as directed. Make : Havells Cat No LHFXCEP1TNNW020(batten) & LHDLEFXD5LR020(LED Tube) or equivalent in Bajaj/Philips |
| 147 | All as per Ser item No 142.00 (here-in-before) but10 wattLED, 2\" batten, Wall mountedwith polycarbonate housing/ batten. Make Havells Cat No LHEXBQP5IN1W009 or equivalent in Bajaj/Philips |
| 148 | Taking down Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge. Make:-Havells Cat Pt No LHETBXU7PA6S020 or equivalent in Bajaj/Philips |
| 149 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and connecting up with driver, three core flexible copper conductor of suitable size incl taking down complete all as specified and as directed. |
| 150 | Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint etc complete all as specified and directed. |
| 151 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 152 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 153 | M&L for MCB Distribution board double door type SPN 12 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs complete all as specified and as directed. Make:- Legrand Cat No 607711 or equivalent in ABB/Siemens |
| 154 | M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs complete all as specified and as directed. Make:- Legrand Cat No 607711 or equivalent in ABB/Siemens |
| 155 | M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, withneutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs complete all as specified and as directed.Make : Legrand Cat Part No 507611/ABB/Siemens |
| 156 | M&L for MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB \"C\" seriesincl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408636 or equivalent in ABB/Siemens |
| 157 | M&L for MCB SP 5-40 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB \"C\" seriesincl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408587-95 or equivalent in ABB/Siemens |
| 158 | Taking down burnt unsv LT UG cable of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. |
| 159 | M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.Make : Richa/Finolex/Polycab |
| 160 | M&L for spread fine river sand in trenches complete all as specified and as directed. NOTE: For measurement purpose, punned down thickness shall only be taken etc complete all as specified and directed. |
| 161 | M&L for laying brick sub class \"B\" old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed |
| 162 | Supply & laying tubes \" Light grade\" galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 25 mm dia bore complete all as specified and as directed. Make : Tata/Jindal/Prakash |
| 163 | Supply & laying tubes \" light grade\" galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya |
| 164 | Supply and fixing for 20mm dia boreTubes, \"Meduim grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. Make: finolex/Richa/RR Kabel. Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme/Richa |
| 165 | Supply and fixing for 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed®complete all as specified and as directed. |
| 166 | M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i)The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI frame with CI coverfunnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 441 of MES SSRPart-II. (ii)Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable |
