Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-09-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-09-2024 |
| Sl. No. | Item Description |
| 1 | Dismantaling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof covering all as specified and directed. |
| 2 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour (approved by GE) having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed. |
| 3 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, ridges, velly guttersfixed with self tapping screwscomplete all asspecified and directed. |
| 4 | M/L for preparation of old , rustedsteel surfaceof any description and applying two coats of synthetic enamel paint all as specified and directed.Note:- 1st Quality of paint to be used. |
| 5 | M&L forcomplete removal of existing treatment by scrapping with sanding pad of 80 Grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc. by skilled labour and applying average 2mmthick water proof putty @ 1 Kg per Sqm over the plastered / old painted wall scrapping to prepare the surfaceeven and smooth and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a maximum material hose length of 30m the spray machine, appliying distemper should be able to spray in hard to reach areas and penatration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 6 | M&L forcomplete removal of existing treatment by scrapping with sanding pad of 80 Grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc. by skilled labour and applying average 2mmthick water proof putty @ 1 Kg per Sqm over the plastered / old painted ceiling surface ( height up to 5m)scrapping to prepare the surfaceeven and smooth and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a maximum material hose length of 30m the spray machine, appliying distemper should be able to spray in hard to reach areas and penatration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 7 | M&L for one coat of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or girthcomplete all as specified and directed.Note:- 1st Quality of paint to be used. |
| 8 | Dismantaling wrought iron or mild steel work of any description not otherwise provided for all as specified and direcred. |
| 9 | M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of grade Fe-410 W (Gde-E250 quality - B) complete all as specified and directed. |
| 10 | M&L for mild steel workfor wind ties in roofs including securing bolts and similar work quality conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 11 | S&F in repairs 2mm thick fibre glass reinforced translucent plain/corrugated sheeting with two corrugation side lape fixed L type or J type or cranked hook bolts and washers in roof complete all as specified. |
| 12 | S&F framed work rolled mild steelas in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, all as specified and directed |
| 13 | M&L for mild steel, plain, black sheet (1.25mm thick)in wall cladding, steel gatesand similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete, all as specified and directed |
| 14 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed. |
| 15 | M&L for brick work with burnt claybricks straight or curved on plan exceeding 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 16 | All as per the description of srl item No 15 above but except bricks. |
| 17 | Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed. |
| 18 | M&L for rendering 15mm thick Ready mix Cement Plaster on faces of brick work or concrete surfaces (External)finished even and smooth without using extra cement complete all as specified. |
| 19 | M&L for preparation of new plastered surface of external wall and making the surface smooth with sand paper and priming the surface wih alkali resistance priming paint for external surface for our primed surface applying two coat of cement washpaint including curing complete all as specified. |
| 20 | M&L for rendering 10mm thick Ready mix Cement Plaster on faces of brick work or concrete surfaces (Internal )finished even and smooth without using extra cement complete all as specified. |
| 21 | M&L prepartion of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer and 3mm thickof wall care putty of make birla/JK, complete all as specfied and directed. |
| 22 | M&L for rendering 5mm thick ready mix cement plaster onconcrete surface as in ceiling/chajja and rainforced cement concrete surfaces (Up to 6 mtr height) complete all as specfied and directed. |
| 23 | M&L for preparation of new plastered surfaces as on ceiling and applying three coats of white wash, complete all as specified and directed. (Up to 6 mtr height ) |
| 24 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level),complete all as specified and directed. |
| 25 | M&L forcement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25cm or less , complete all as specified and directed . |
| 26 | Forming contraction (Dummy)joints 65mm deep x 10mm wide filled with sealing compound Grade \"A\", complete all as specified and directed . |
| 27 | Forming construction joint 30mm deep x 10mm wide, filled with sealing compound Grade \"A\", complete all as shown on drawings and specified. |
| 28 | M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mmthick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved). |
| 29 | M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, 75mm thick as in sub base cemplete all as directed and specified |
| 30 | M&L machine precast colour concrete decorative interlocking paver blockof a with grey cement and pigment any shape and size confirming to IS15658-2006 of 80mm thickness M-40 Gde complete all as specified. |
| 31 | M&L sand filling under floors including watering and consolidation,complete all as specified and directed. |
| 32 | M&L cement concrete type B-1, 1:2:4 using 20mm graded crushed stone aggregate inkerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 33 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each (without taking off shutters from the frame) cemplete all as directed and specified |
| 34 | Taking down chowkhats or frames with shuttersexc 1.5 sqm but n.exc 4sqm each (without taking off shutters from the frame) cemplete all as directed and specified |
| 35 | Taking downshutters exc 1sqm but not exc 2 sqm each all as directed. |
| 36 | S&F framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, all as specified and directed |
| 37 | Taking downdoor shutters of any description exceeding 1 square metre and not exceeding 2 square metre each easing, and adjusting as required and re-fixing in same opening including renewal of screws complete all as specified and directed. |
| 38 | S&FMS bars as in window guard bars welded to steel window frame or fixed to wooden frame all as specified and directed. |
| 39 | S&F aluminum powder coated three track slidingwindow with frame and two no\"s glazed shutter and one no\"s gauzed shutter/Ventilator shutters side hung type with or without sash bar, locking rails, locking arrangements with frames including necessary joinery, cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, suitable handle, tower bolt, hinges and glazing of 5.5mm thick size. Size of top rail, bottom rail shall be 44.45mm x 44.45mm and size of frame shall be 65mm x 44.45mm and thickness of aluminum 2.50mm thick complete all as specified in MES SSR-1991, Part-I complete all as specified and directed. Note:- 5.5mm thick tinted glass or wire mesh will be measured and paid for separetetly under repective items. |
| 40 | M&L for powder coated aluminium grill in repairs of powder coating of minimum 50 micron with aluminium mesh of sze 50mm x 50mm with square tube solid 6mm thick including aluminium channel of size thickness of channel 1.5mm complete all as specified and directed. |
| 41 | S&F 30mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etcwith rails and styles including cut and mitered beards for securing wire cloth etc, complete all as specified and directed. |
| 42 | S&F door closer hydraulically regulated,of aluminium (Die cast) body universal type suitable for door shutters851 to 1000mm in width and weight between 38 to 60kg of Hydraulic door closer complete all as specified and directed. |
| 43 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed. |
| 44 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed. |
| 45 | S&F glazing of tinted glass 5.5mm thick in aluminium door window shutters and partitions etc with PVC/neoprene gasket etc complete all as specified and directed. |
| 46 | S&F aluminium anodized barrel tower bolts of extruded section of length 150mm, complete all as specified and directed. |
| 47 | S&F aluminium handle cast type anodized 150mm, complete all as specified and directed. |
| 48 | S&F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 49 | S&F 125mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed. |
| 50 | Cutting holes in brick walls built in cement mortar for insertinghold fasts and making good dismentled portion in CM 1:3 or cement concrete 1:2:4 type B-I as required, Exc half brick but not exc one brick wall complete all as specified and directed. |
| 51 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing the serviceable tiles to store and rubbish off the premises etc complete all as specified and directed. |
| 52 | M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick as in vertical surface such as dado, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including layer 10mm thick in cement mortar 1:4 complete all as directed and specified |
| 53 | M&Lnon skid coloured ceramic tiles 7 to 8mm thick (square/rectengular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over and including 15mm thick screed bed or bedding layer of mortar inCM 1:6 for laying floor finish complete all as specified and directed. |
| 54 | M&L for vitrified ceramic light shade tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqmas in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over and including 15mm thick screed bed or bedding layer of mortar inCM 1:6 for laying floor finish complete all as specified and directed.. |
| 55 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectengular) area in vertical surface as in skirting/dado of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over and including 10mm thick in cement mortar 1:4 complete all as directed and specified |
| 56 | M&L for vitrified ceramic light shade tiles 10mm thick (Square/rectangular) polished area in vertical surface as in skirting/dado of each tile not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, and including layer 10mm thick in cement mortar 1:4 complete all as directed and specified. |
| 57 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed. |
| 58 | S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 59 | S&F PVC (SWR) bends of 110mmradius complete all as specified and directed. |
| 60 | S&F in repairs 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls and ceiling or laid in floor including taking up or down steel tubing or connections, including cleaning for refixing or removal to store all as specified. |
| 61 | S&F in repairs 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls includingtaking up or down steel tubing or connections, including cleaning for refixing or removal to storeall as specified. |
| 62 | M&L for cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and ctting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 63 | S&F in repairsstainless steel curtain rodsof 20mm dia including brackets, side stopcomplete all as specified and directed. |
| 64 | M&L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 65 | M&L preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 66 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) ,round or square pipesincluding distance pieces etc.grade Fe-410 W (Gde-E250 quality-A) all as specified and direcred. |
| 67 | S&F in repairs 2mm thick fibre glass reinforced translucent plain/corrugated sheeting with two corrugation side lape fixed with screws and washers in roof complete all as specified. |
| 68 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, Frame work etcall as specified and directed. |
| 69 | S&F GI powder coated frame work of size 605 x 605 mm, forceling comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre , hanging with 6mm dia GI Hanger, complete all as specified and as directed. |
| 70 | M&L for 4mm thick size non asbestos fibre cement building boards fixed or laid / inserted to timber/ GI / Aluminiumframe work with screws complete all as per manufacturers instructions and as directed. |
| 71 | M&L prepartion of newly plastered surface of ceilingand distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work, complete all as specfied and directed. |
| 72 | Complete removal of old roof treatment including cement mortar bedding and removing debries out side MOD land ,( except mudfushka) ,complete all as specified and directed. |
| 73 | M&L for 15mm thick cement plasterover the concrete / brick roof surfacesin cement mortar 1:4mixed with liquid water proofing compound@ 200ml per bag WPC (liquid type), surface finished even and smooth without using extra cement all as specified and directed.Note :- Water proofing additive shall be measured and paid separately. |
| 74 | M&L for preparation of roof top surfaces by cleaningall the dust and loose material by brush/blower/Grinder including removing of vegetation/plantation from the surface and providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co elastic technology (CET) based on modified polyurethane and fully fibre reinforced, having Sun Reflectivity index (SR) of 109 on top of concrete roof surfaces. All cracks up to 3mm at corner joints, channel and parapets should be treated with crack seal. Applying three coatsincluding one coatof primer ofShaliUrethane BTD/ Sikalastic 560/ smart care damp proof-ultra having coverage @ min 0.75kg/m2and dilution up to 10% andlaying reinforced fiber net and applying two coats (without dilution) of shaliUrethane BTD/Sikalastic 560/smart care damp proof ultra@totalconsumption 2 kg/m2intwo coats for maintainingminimum dry filmthickness 1.5mm and elongation at breakof free film of approx 350%. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant (Note :6 Hrs interval between two coat will be maintained). All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system.Make: STP/Sika/Asian paint or equivalent as approved by GE. Note:- (i) Application of water proofing treatment will be done by Authorised Applicator duly approved by GE in writing.(ii) The water proofing treatment shall be carried out by the manufacturer or their authorized applicators (iii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However, contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor\" risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor\"s quoted rates for this item shall deemed to be inclusive of this aspect |
| 75 | Supply only liquid water proofing compound complete all as specifiedand as directed.Make: FOSROC or equivalent as approved. |
| 76 | Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting in soft /loose soil complete all as specified & directed. |
| 77 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth etcnot exceeding 10 Sqm on planfor shafts, cesspits, manholes, pier holes, foundation etc and getting out in any type of soil complete all as specified & directed. |
| 78 | Returning, filling in including spreading levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified & directed. |
| 79 | Removing excavated material not exceeding 50m and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil complete all as specified & directed. |
| 80 | M&L for hardcore of gauge n-exc 63mm of broken bricks,deposited ,spread and levelled in layers n.exc. 15cm thick watered and rammed to a true surface complete all as specified & directed. |
| 81 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified & directed. |
| 82 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat surface complete all as specified. |
| 83 | M&L RCC M-25 (Design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified & directed. |
| 84 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions of shape Square, Rectangular or polygonal complete all as specified & directed. |
| 85 | M&LRCC M-25 (Design mix) as in columns, pillars, piers, posts and struts complete all as specified & directed. |
| 86 | Form work to sides of concrete roof beams, lintels cantilevers etc including supports complete all as specified & directed. |
| 87 | M&LRCC M-25 (design mix) as inbeams, cantilivers, bressummers, lintels over 1.5m span uing complete all as specified & directed. |
| 88 | Form work to soffits of suspended slab such a roof slab etc not exc 200mm thick complete all as specified & directed. |
| 89 | Form work to edges of roof slab, RCC bands etc n.exc 200mm complete all as specified & directed. |
| 90 | M&L RCC M-25 (Design mix) as in slab supported on walls, beams & colmns etc asin roof & the like complete all as specified & directed. |
| 91 | M&L for mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality all as specified and directed. |
| 92 | M&L formild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bars,complete all as specified and directed. |
| 93 | S&F 30mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed. |
| 94 | S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed. |
| 95 | S&F 4mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane complete all as specified and as directed. |
| 96 | S&F butt hinges of medium weight cold rolled mild steel 100mm size and fitted to wooden or steel frame all as specified and directed. |
| 97 | S&F aluminium alloy, anodised, sliding door bolt 200mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed. |
| 98 | S&F aluminium anodisedbarrel tower bolts of extruded section 150mm long fixed with screws complete all as specified & directed. |
| 99 | S&F aluminium anodisedhandle of extruded section 100mm long fixed with screws complete all as specified & directed. |
| 100 | M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper on walls complete all as specified & directed. |
| 101 | M&L for preparing new plastered surfaces of walls and applying two coats of Cement based paint complete all as specified & directed. |
| 102 | Cutting chases pinning in making good to facing where required for concealed water tubingand making good cutting not exc 10cm girth in brick walls complete all as specified & directed. |
| 103 | M&L for 15mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors complete all as specified & directed. |
| 104 | S&F bib taps, long body, fancy type, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, fixed in repair, complete all as specified & directed. |
| 105 | S&F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (concealed type) complete all as specified & directed. |
| 106 | S&F rotational moulded polyethene water storage tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified & directed. |
| 107 | M&L 40mm thick for PCC 1:2:4 type B-1 (using 12.5mm graded crushed stone aggregate) as in roof padding mixed with WPC @ 3% wt. of cement complete all as specified. |
| 108 | M&L for water proofing treatment to roof slab withAPP modified membrane weight not less than 3.5kg /sqm and thickness of membrane not less than 3mmwater absorption of not more than 1% on mass within 24hrs and water tightness/ impermeability at 2 kgf/Cm2 on primed surface and applying hot bitumen@ 1.2 kg/sqm for fixing APP Membrane and seledjoint with torch application. all as specified and directed by Engineer-in charge with following description :-(a) Before laying APP membrane entire surface shall be plastered with 10mm thick in CM 1:4 with using water proofing liquid 150ml per bag of cement, curing, drying and applying evenly a coat of bituminous oil based primer @ 0.30kg/sqm and then laying APP modifiied membrane with 100mm over lap in longitudinal direction and 100mm in transverse direction all joints and changes in all direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement at corners and cured well before laying the membrane. (b) Upper side of the membrane shall be uniformly painted with bituminous aluminium oil paint @ 0.3kg/sqm. |
| 109 | Excavating in post holes (or similar holes) each n exc 0.50 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, in soft / loose soil complete all as specified and directed. |
| 110 | M&L for cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed. |
| 111 | S&F steel work in tubler trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 all as specified and direcred. |
| 112 | S&F2mm thick fibre glass reinforced translucent plain/corrugated sheeting with two corrugation side lape fixed L type or J type or cranked hook bolts and washers in roof complete all as specified and directed. |
| 113 | S&F mild steel work as inpost fencing \"Y\" shape/ swan neck and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and directed. |
| 114 | S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured complete all as specified and directed. |
| 115 | M&L for PCC 1:2:4 type B0 using 12.50mm graded crushed stone aggregates as coping including weathering, slightly rounded, chamfered angles and finishing exposed surface even and smooth including necessary form work complete all as specified and directed. |
| 116 | M&L for rendering 15mm thick in CM 1:4 on fair faces of bricks work or concrete surfaces finished even and smooth using extra cement complete all as specified and directed. |
| 117 | M&L forpreparation of new plastered surface of external wall and making the surface smooth with sand paper and priming the surface wih alkali resistance priming paint for external surface or primed surface applying two coats of cement base paint including curing complete all as specified. |
| 118 | Cutting holes in brick walls built in cement mortar exc 150 sq.cm but n exc 400 sq.cmand making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as requiredd complete all as specified and directed. |
| 119 | M&L for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregates as coping including weathering, slightly rounded, chamfered angles and finishing exposed surface even and smooth including necessary form work complete all as specified and directed. |
| 120 | Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed. |
| 121 | M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and modular metal flush box, modular white cover plate with frame, blanking plate etc suitable forup to required module etc complete and making good to the disturbed surfaces to match the existing complete all as specified and directed for for One light controlled by one, one way switch 06 Amps |
| 122 | All as per the description of srl item No 121here-in-before but for one bell point controlled by one bell push switches |
| 123 | All as per the description of srl item No 121here-in-before but one Ceiling fan point controlled by one, one way switch 5/6 Amps |
| 124 | All as per the description of srl item No 121here-in-before but one Exhaust / Ventilation fan point controlled by one, one way switch 5/6 Amps |
| 125 | All as per the description of srl item No 121here-in-before but one 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 06 Amps switch |
| 126 | All as per the description of srl item No 121 here-in-before but with point wiring 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sqmm single core FRLS cable for one 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch complete all as specified and directed |
| 127 | All as per the description of srl item No 121here-in-before one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board and independent MCB complete all as specified and directed |
| 128 | S&F switch piano flush type, 06 Amps, single pole, one way, 230 volts complete all as specified and directed |
| 129 | S&F bell push, flush type, 06 Amps, 230 volts with switch frame complete all as specified and directed |
| 130 | S&F switch piano flush type, 16 Amps, single pole, one way, 230 volts with switch frame complete all as specified and directed |
| 131 | S&F socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 230 volts with socket frame complete all as specified and directed |
| 132 | S&F socket outlet 2 in 1, 3 pin, 06 Amps and 3 pin, 16 Amps, flush type, 230 volts with socket frame complete all as specified and directed |
| 133 | S&F ding dong bell, AC, 230 volts, single pole complete all as specified and directed |
| 134 | S&F ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, humfree, AC, 230 volts, 100 watts complete all as specified and directed |
| 135 | S&F ceiling rose, 6 Amps, 230 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm sizecomplete all as specified and directed |
| 136 | S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting including 9W LED bulb complete all as specified and directed |
| 137 | S&F surface mounting LED integrated aluminium housing batten luminaire not less than 18 W, 4 feet fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V and all accessories pre-wired including connecting up with copper conductor wire of suitable size with connector block complete all as specified and directed |
| 138 | S&F surface mounting LED integrated aluminium housing batten luminaire not less than 8 watt 2 feet fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V and all accessories pre-wired including connecting up with copper conductor wire of suitable size with connector block complete all as specified and directed |
| 139 | S&F surface mounted LED building security light fitting 45 Watt in high pressure die cast aluminium housing not less than 20 watt fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, ripple<5%, UGR<19, minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V including light grade GI tube mounting size 40mm bracket of suitable size & length, bend to shape and fixed to wall by means of 02 nos. of 40 x 5mm flat iron clamps, nuts, bolts and washers etc completeand one coat of primer and one coat of synthetic enamel paint after coating of primer on GI bracket and pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core complete all as specified and as directed. |
| 140 | S&Fexhaust fan, steel body, AC, single phase, 230 V of size 300mm sweep with blades, frame & louver having 1400 RPM speed, 1600 CMH and including making of holes of suitable size and taking down old exhaust fan and depositing to MES store yard making good to the disturbed surfaces to match the existing completeall as specified and as directed. |
| 141 | Supply, installation, testing and commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete and taking down old unserviceable fan and deposit in E/M store yard complete all as specified and directed |
| 142 | M&L for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring complete all as specified and directed |
| 143 | S&F (in replacement) sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and sheet metal enclosure double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed |
| 144 | S&F (in replacement) sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 415 volts, 04 ways with 200 Amps rated copper bus bar and metal double door suitable for MCCB 125 amps as incomer and MCB SP as outgoing along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed Note :- MCCB & MCB SP will be measured seperately |
| 145 | S&F MCCB 125 amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line/ VTPN DB & connection complete all as specified and directed |
| 146 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning by using suitable copper lugs complete all as specified and directed. |
| 147 | SP 5 To 32 AMP |
| 148 | SPN 40 to 63 AMP |
| 149 | M&L for earthing complete with galvanised mild steel earth plate electrode 60cm x 60cm x 6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR Part I-2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipemedium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mm x 40mm x 3mm frame for pit cover including testing on completion complete.Note: On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.) |
| 150 | S&Fenergy efficient wall mounted LED bulk head luminaire of polycarbonate housingand enclosed with acrylic diffuser 10 watt , 230 volt, AC, IP-65 protection complete all as specified and directed. |
| 151 | S&F ceiling fan complete with blade, down rods electronic regulator and accessories 230 v ,1200 mm sweep min air delivery 210 Cfm with service value 6 BEE5 star rated with brushless direct current motor complete all as per specified and directed |
| 152 | S&F sheet metel enclosure with single pole and neutral enclouser with two pin and earth plug and socket complete with single pole MCB 20 Amp C curve 240 volt complete all as specified and directed. |
| 153 | S&F LED street light fittings 60 Watt 230 v AC outdoor type with high pressure die cast Al housing and heat resistant complete with driver lamp bracket with impact and corrosion resistant incl thermal management in multiple optics complete with IP-65 protection complete all as specified and directed. |
| 154 | S&F electric water heating storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 ltr, BEE 5 star rated complete with all accessories such as safety valve thermostate, NRV, connection pipe complete all as specified and directed |
| 155 | S&Fexhaust fan 300mm sweep, 230V, AC, heavy duty with louvers shutter complete including connection complete all as specified and directed. |
| 156 | Supply and laying or fixing or passing through pipe 1100V grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm 2 core nominal cross section in service connection complete all as specified and directed. |
| 157 | M&L for sand cushioning to under ground cable with a layer of sand 8 cm before laying the cable and 15cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed. |
| 158 | M&L for sub class ‘B bricks, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and as directed |
| 159 | M&L for GI pipe 40mm, light grade with clamps made out of MS flat 40mm x 5mm thick, fix/laid on pole/wall/road complete all as specified and directed. |
| 160 | M&L for making hole 80mm dia below the road in by drilling machine or hand drill without damaging road for inserting pipe 40mm dia for drawing of cable complete all as specified and directed. |
| 161 | Supply & Laying GI pipe 20mm dia bore, medium gradeISI marked including all fittings complete all as specified and directed. |
| 162 | S&F heavy dutybrass/gun metal Ball valve, 20mm bore with handlehead, screwed both ends for iron pipe, ISI Marked complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
