|
| 1 | Dismantling floor hearth or wall tiling including cementmortar bedding (but not backing) complete all as specified and directed |
| 2 | Demolition of mud in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) including removal demolished material upto 1 km complete all as specified & directed. |
| 3 | PCC 1:3:6 type C-1 (using 20m graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, complete all as specified and directed. |
| 4 | Rendering 15mm thick (average thickness) plaster in cement mortar 1:4 mixed with WPCon concrete roof/ wallsurfaces including flashings and junction of parapets etc,finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only). |
| 5 | 3mm thick Atactic polypropylene polymer (APP) modified prefabricated five layer water proofing membrane, based polymeric membrane minimum weighing 3.6kg/sqm andreinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed. |
| 6 | Supply only Integral waterproofing compound, all as specified. |
| 7 | Coloured vitrified ceramic tiles 8-10mm thick (square / rectangular) polished, light shade, area of each tiles exc 0.42 sqm butn.exc 1.00 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed |
| 8 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed. |
| 9 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed. |
| 10 | Glazed ceramic tiles in vertical surface450x350x7mm thick, joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 10mm thick rendering in cement mortar 1:4 , complete all as specified and directed. |
| 11 | Demolition of un-reinforced cement concrete of any description, in any position not specifically provided for, complete all as specified and directed. |
| 12 | Demolition of brickwork built in cement mortar or cement lime mortar, including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed |
| 13 | Brick work with sub class ‘B’ bricks of old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 14 | Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed. |
| 15 | Taking down cement plaster on brick / stone walls or ceiling (up to 10 mtr height) including raking out joints, hacking for key, scrubbing down with water, etc , complete all as specified and directed. |
| 16 | Rendering 15mm thick in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | Preparation of new surfaces of any description of wall, facia, ceiling, RCC etc and applying two coats of oil bound destemper over one coat of interior wall primercomplete all as specified and directed. |
| 18 | 15mm thick rendering in Cement and Sand mortar 1:4 over concrete /brick surfacesfinished fair and even without using extra cement (upto 4 Storey Bldg ), including taking down old cement plaster and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed. |
| 19 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint (any colour) including all necessary scaffolding and safety arrangements, complete all as specified and directed. |
| 20 | Compelte removal of of existing treatement of wall surface, including prepartion of old undecorated surfaceand applying two coats of oil bound distemper over one coat of interior wall primer including wall care putty (average thickness 2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed. |
| 21 | Compelte removal of of existing treatement of ceiling surface, including prepartion of old undecorated surfaceand applying three coats of white washcomplete all as specified and directed. |
| 22 | Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed. |
| 23 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each, and removal from site complete all as specified & directed. |
| 24 | Powder coated aluminum sections as inframes/ shutter of doors/window/ventilators /partitions,(Sliding / openable/ three track)including joinging cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc. complete all as specified and directedNote : (i) Minimum thickness of power coating shall not be less than 50 micron.(ii) Weight of aluminum section only shall be measuerd and paid.(iii) Aluminum doors/windows /ventilators to be fixed to jambs with chromium plated screws .(iv) The rate shall be inclusive of neoprene beadings, snap beading, screws etc and in case of sliding shutters locking arrangement and rollers in sliding shutters. Weight of fitting fixtures will not be measured for arriving the weight of aluminum section.(v) Glass /wooden panel/ACP sheet shall be measured and paid separately under respective items.(vi) Design as directed by Engineer in charge. |
| 25 | 4mm thick aluminium composite panel sheet (ACP) fixed with aluminium beading with rubber gasket including all necessary clips and fittings colour as approved byEngr-in-Charge all as specified and directed. |
| 26 | 5.00mm thick ordinary quality tinted glass,fixed to aluminum frame workin panels exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 27 | 30mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides all as specified & directed by Engineer-in-charge. |
| 28 | 125 mm aluminium handles fabricated typecomplete all as specified and directed. |
| 29 | 125 mm size aluminium, barrel tower bolt of extruded section and fixed for PVC door complete all as specified and directed. |
| 30 | Aluminum alloy, anodized, sliding door bolt (ISI Marked), 300mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, fixed as in repair complete all as specified and directed. |
| 31 | factory made solidPVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 32 | Supply only Stainless steel wire cloth,0.56 mm nominal dia of wire and average width of aperture 1.18 mm , fixed with stainless steel wire staple/ wooden beads,complete all as specified. |
| 33 | Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 34 | Butt hinges 100mm size, of extruded aluminum alloy with galvanisedmild steel hinge pin, anodised, type B-21, complete all as specified and directed. |
| 35 | Reinforced cement concrete type A-1, 1:1½:3(nominal mix, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 36 | Form work to flat surfaces of suspended slabs such as roof slab, floor slab, landing, shelves etc not exceeding 200mm thick,including edges in any position, rough finished surfaces, complete all as specified and directed. |
| 37 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as specified and directed. |
| 38 | Precast concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning,complete all as specified and directed |
| 39 | Plain cement concrete type B-0, 1:2:4 using (2012.5 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed. |
| 40 | Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, sub base and mass concrete complete all as specified & directed. |
| 41 | Hard core ofbroken stone or boulders of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed. |
| 42 | Reinforced cement concrete 1:1½:3(nominal mix,type A-1, using 20mm graded crushed stone aggregate) as in chajjas, parapets, facia etc, all as specified and directed . |
| 43 | Mild steel TMT bars 10mm dia and over ,cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 44 | Material and labour for mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified. |
| 45 | Form work to chullah hoods, chajjas and similar items including edges / sides and soffits of lintelsetc rough finished surface of concrete flat complete all as specified and directed. |
| 46 | Factory made 18mm thick solid WPC (Wood Polymer Composite) board of density 650 Kg /cum of one sideprelaminated / rigidlam with any colour and other side balancing laminate as in cup board/ kitchen cabinet shutter/ drawer, front shuters, fixed with screws, solvent/ adhesive complete all as specified and directed. |
| 47 | Granite stone slabs, 16 to 18mm thick,width and length as per site requirement, best qualitymachine cut andpolished to be fixed infloors,cooking plateform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of edgesand corners where required with and including 15 mm thick screed bed in cement mortar 1:4, Complete all as specified and directed. |
| 48 | Counter Top Basin, Size 600 x 440 x 165mm, coloured white, fixed in position,complete all as specified and directed. |
| 49 | Sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes: including bedding in cement mortarto dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed by Engineer-in-charge. |
| 50 | 786mm x 914 x 254mm kitchen plate rack stainless steel with steel shelves, made out of 1mm thick sheet and hanging arrangement, complete all as specified and directed. |
| 51 | Vitreous china, wash down water closet pan, white, pedestal pattern with ‘P’ or ‘S’ trap, (excluding, flushing cistern and flush pipe), complete all as specified and directed. |
| 52 | Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests(excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, complete all as specified & directed. |
| 53 | Beveled edge looking mirror, 5.5mm thick of selected quality glass, including wood finish PVC mouldingmounted on 6mm thick ply or of PVC frame fixed to wall with screw and rawl plugs,complete all as specified and directed. |
| 54 | PVC valve less syphonic action flushing type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for English squat pattern WC, set with concrete and making good to floor,complete all as specified & directed. |
| 55 | Rounding of / moulding to edges of stone of any description including rubbing and polishing (Granite finish) complete all as specified and directed. |
| 56 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth complete all as specified & directed by Engineer-in-charge. |
| 57 | Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, fixed as in repair complete all as specified and directed. |
| 58 | Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, fixed as in reapir complete all as specified and directed. |
| 59 | Bib tap, long body, fancy typecast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union,suitable for 15mm bore pipe, complete all as specified and directed. |
| 60 | Angular stop valve,fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union,suitable for 15mm bore pipe, complete all as specified and directed. |
| 61 | Stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe,complete all as specified and directed. |
| 62 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 63 | PVC(SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mmincluding nuts bolts etc,complete all as specified and directed. |
| 64 | PVC(SWR) waste pipe, 110mm bore, single socketed in any length with cement/ rubber ring joints, laid in trenches or infloor,complete all as specified and directed. |
| 65 | 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 66 | 110mm dia PVC (SWR) junction single,(Single T) equal or unequal with acess door complete all as specified and directed. |
| 67 | 110 mm dia PVC (SWR) vent cowl any radiuscomplete all as specified and directed. |
| 68 | PVC(SWR) waste pipe, 75mm bore, single socketed in any length with cement/ rubber ring joints, laid in trenches or infloor,complete all as specified and directed. |
| 69 | 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement,complete all as specified & directed. |
| 70 | PVC (SWR) bends any radius 75mm dia, complete all as directed. |
| 71 | PVC (SWR) bends any radius 75mm dia with oval acess door, complete all as directed. |
| 72 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed |
| 73 | Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, all as specified and directed. |
| 74 | PVC lining coloured or selective pattern, as in repair PVC lining of hollow profile not less than 5mm thick and not less than 250mm wide intelocking type system as in wall/celing linings including end and intermediet U or L PVC sections as per manufacturer instructions , complete all as specified and directed(Note : Colour/design and pattern shall be as decided by the GE) |
| 75 | 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading)in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 76 | Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and directed |
| 77 | Machine cut kota stone slab flooring 15-18mm thick of one piece in stair case, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab,as inin skirting, dados, risers to steps, pillar etc, laid over and including 10mm screed layer in cement mortar 1:4, cutting, rubbing, grinding and polishing complete, all as specified. |
| 78 | Grinding and mirror polishing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish , dusting off the surface after grinding, washing and mirror polishing complete all as specified and directed. |
| 79 | Hacking out old broken glasses of any description from metal frames including punching or drilling out old glazing pins/springs clips and fixing new ones, complete all as specified and directed. |
| 80 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0,all as specified and directed. |
| 81 | Toilet paper holder, cast copper alloy, chromium plated,fixed in position, complete all as specified and directed. |
| 82 | Supply and fixing Vitreous China Urinal, full stall type, white with CP waste fitting, brass CP urinal spreader including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screwscomplete all as specified and directed. |
| 83 | Curved shaped urinal partition with frosted glass 8-10mm thickm, chrome finishmonted agaisnt wall compelte all as specified and directed. |
| 84 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 100mm dia of pipe,complete all as specified and as directed |
| 85 | Salt glazed stoneware drain pipe grade ‘A’ 100mm bore, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed. |
| 86 | 25mm dia mild steel , PVC coated (coloured) as in drapery rod including brackets, end caps etc fixed as in repair, complete all as specified & directed. |
| 87 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, all as directed. |
| 88 | Excavation in post holes (or similar hole) each in hard and dense soil n.exc 0.50 cu m getting out and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed. |
| 89 | Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete, all as specified & directed. |
| 90 | Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 , complete all as specified & directed by Engineer-in-Charge. |
| 91 | Two coats of synthetic enameled painton steel and iron surfacesover 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed. |
| 92 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge. |
| 93 | Demolition of cement concrete (reinforced) of any description andin any position complete all as specified and directed. |
| 94 | 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, includingall fitting and fixture required at site complete all as specified and directed. |
| 95 | Dismantling boarding, any type and any description, fixed any position with nails all as specified and directed. |
| 96 | 18 mm thick HDHMR Board for Modular kitchen as per approved design manufactured from hardwood and having uniform density gradient & compact core with density over 850 kg/m3, prelaminated both sides white, complete all as specified and directed by Engineer-in-charge. |
| 97 | 1.5mm thick scratch proof high gloss Acrylic sheet, to be pasted on front shutters of HDHMR board, complete all as specified and directed by Engineer-in-charge. |
| 98 | 8-10 mm thick HDHMR Board for modular kitchen (used in backside base of cabinets) as per approved design manufactured from hardwood and having uniform density gradient & compact core with density over 850 kg/m3, prelaminated both sides white compete all as specified and directed by engineer-in-charge. |
| 99 | 20mm wide & 1mm thick PVC edge beading of PVC pasted on edges with suitable adhesive, complete all as specified and directed. |
| 100 | Food grade stainless steel wire in any baskets of a modular kitchen (storage basket, cup and saucer basket, jas basket, thali basket, cutlery basket, grain trolley , plain basket, bottle pull out etc), minimum loading capacity65 Kg, made by min 6 mm dia stainless steel round bars, proper welded and joints finish by grinding, chromium plated finish, fixed properly with WPC board of any thickness as per design approved, including fixing of auto closing hinges, ball bearing runners of any description, stainless steel handles fixing clips, sliding frame structure, SS screw etc complete all as specified and directed by Engineer-in-charge.Note:1. Only weight of SS wire basket will be measured before fixing.2. Only Fixing of all Fitting/fixtures like handles, hinges, ball bearing runners, telescopic channels etc are included and will be paid in separate items as supply only. |
| 101 | Supply only of soft auto closing hinges openable at 0 degree for kitchen cabinet shutters Make :Hettich/Ebco/ Primer |
| 102 | Supply only Ball bearing runners 45 mm soft closing Telescopic Channel (20 Inch) full extension load capacity 50 Kgs, Black powder coated, Make :Hettich/Ebco/ Primer |
| 103 | Metal profile section for each shutter in kitchen cabinets either below or above slab complete all as specified. |
| 104 | Handmade double bowl Sink of single bowl size 410 x 330 x 160 mm complete all as specified. |
| 105 | 01 Chimney is also included in the item, having width 900 mm and giving minimum suction capacity 1500 cum/hr. complete all as specified and directed. Make : Elica/ Faber/ Hindware |
| 106 | Preparation of new surfaces of any description of wall etc and applying two coats of oil bound distemper over one coat of interior wall primer including wall care putty (average thickness 2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed. |
| 107 | Plate girder or single stanchion, built up of one beam or channel section with flange plates, cap, bases , splices, angle braclkets, cleats and other connections as support to walls or slabs, e 410-W Gde E-250 quality A complete all as specified and directed. |
| 108 | Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socketor power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete all as specified and directed. |
| 109 | Material and labour forpoint wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single coremulti stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising ofOne light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original and nothing extra shall be paid on this account. |
| 110 | All as per serial item 109 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed |
| 111 | All as per serial item 109 herein before but for socket outlet 3 pin 6 Amps on independentboard complete all as specified and directed |
| 112 | All as per serial item 109 herein before but for one light point controlled by two way switch complete all as specified and directed |
| 113 | All as per serial item 109 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSHcable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor |
| 114 | Switch modular type (ISI marked), single pole, one way 6 Amps, one module(ISI marked), complete all as specified & directed. |
| 115 | Switch modular type (ISI marked), single pole, one way 16 Amps, one module(ISI marked), complete all as specified & directed. |
| 116 | Socket shutters outlet 2/3 pin 6 Amp modular type multi purpose two module (ISI marked), complete all as specified & directed. |
| 117 | Socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed. |
| 118 | Modular switch type stepped fan regulator, single pole, 230 volt two module complete all as specified and directed. |
| 119 | Modular switch type bell push, single pole, 230 volt one module,(ISI marked) complete all as specified and directed. |
| 120 | Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specifiedand directed by Engineer-in-charge. |
| 121 | Electric Bell, ding dong, AC, 230 volts, single pole all as specified and directed by Engineer-in-charge. |
| 122 | Lamp holder, PVC/Polycarbonate type with back plate modular type fixed on wall suitable for batten fitting ,complete all as specified and directed. |
| 123 | LED lamp9 watts, B-22 type complete all as specified . |
| 124 | Disconnecting the power supplyand taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB\"s ,MCB\"s etcand removing from site, Complete all as specified and directed . |
| 125 | MCCB, 125 Amps, four pole, 3 phase , 16KA, 415 volt with adjustable thermal andmaganetic release, with proper thimble complete all as specified and directed |
| 126 | Vertical TPN distribution board double door flush mounting with provisions for MCCBs incomer upto 125 Amps & outgoing 4 way having IP 43 protection Complete all as specified and directed . |
| 127 | MCB DB, IP 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, 08 way SPN with 200 Amps busbar 240V completed all as specified and directed. |
| 128 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 10 Amp MCB complete all as speicified and directed. |
| 129 | MCB, SPN, 240 volt,32 Amps, 10 KA , \"C\" series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 130 | MCB, SP, 240 volt,40 Amps, 10 KA , \"B\" series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 131 | MCB ,SP, 240 volt, 6 Amps to 32 Amps, 10 KA , \"C\" series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 132 | LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable sizefixed as in repair complete all as specified and directed. |
| 133 | Slim LED lights fitting, 4 feet,1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose fixed as in repair complete all as specified and directed. |
| 134 | Slim LED lights fitting, 2 feet,1x 10W, inverter rechargeable,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose fixed as in repair complete all as specified and directed. |
| 135 | Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified and directed. |
| 136 | Sub main wiring with two singlecore FRLSH PVC insulated and unsheathed cable with copper conductor of size 4 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 4 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing throughPVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfacesby providing by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed.Note : (i)For the purpose of measurement, 2 single core of 4 sqmm and one single core earth cable of 4 sqmm cableshall be considered as 1 running metre. (ii) colour code shall be Red for phase, Black for neutral and green for earth |
| 137 | Supply and fixing sub main wiring with two singlecore FRLSH PVC insulated and unsheathed cable with copper conductor of size 10 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 10 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing throughPVC concealed conduit 32/40mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfacesby providing by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed.Note: (i)For the purpose of measurement, 2 single core of 10 sqmm and one single core earth cable of 10 sqmm cableshall be considered as 1 running metre. (ii) colour code shall be Red for phase, Black for neutral and green for earth |
| 138 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth Complete all as specified and directed . |
| 139 | LED panel surface mounted -2\"x2\" - 36 wattscool day light fitting with heat exchanger unit, LED driver, surge protection complete including cutting hole of required size in POP/false ceiling making good disturbed including taking down any type ceiling fittingcomplee all as specified and directed. |
| 140 | LED panel surface mounted -2\"x2\" - 36 wattscool day light fitting with heat exchanger unit, LED driver, surge protection complete including cutting hole of required size in POP/false ceiling making good disturbed complee all as specified and directed. |
| 141 | LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver,includinglamp bracket upto 1.5metre length as per suitable for fitting including clamp with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, fixed as in repaircomplete all as specified and directed. |
| 142 | Round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, fixed as in repair complete all as specified and directed. |
| 143 | Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and directed. |
| 144 | Cutting openings, through brick walls in round shape , for 300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc..from site and rubbish complete all as specified & directed by Engineer-in-charge. |
| 145 | Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, burried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI light grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of presast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Sch Part-I (2009), complete including dismantling of old earthing, all as specified and directed. Note(s) :-(i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm.(ii)PCC chamber shall be constructed 500 mm away from the edge of earth pit.(iii) Rate shall include earth lead and protection pipe of length 7.5m(iv)Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt.(v) unit rate including protection pipe and GI wire 4.00mm dia from top to earth plate upto 7.5 meter |
